Catalytic Fast Pyrolysis of Kraft Lignin With Conventional, Mesoporous and Nanosized ZSM-5 Zeolite for the Production of Alkyl-Phenols and Aromatics
Open accessThe DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
The valorization of lignin that derives as by product in various biomass conversion processes has become a major research and technological objective. The potential of the production of valuable mono-aromatics (BTX and others) and (alkyl)phenols by catalytic fast pyrolysis of lignin is investigated in this work by the use of ZSM-5 zeolites with different acidic and porosity characteristics. More specifically, conventional microporous ZSM-5 (Si/Al = 11.5, 25, 40), nano-sized (≤20 nm, by direct synthesis) and mesoporous (9 nm, by mild alkaline treatment) ZSM-5 zeolites were tested in the fast pyrolysis of a softwood kraft lignin at 400-600°C on a Py/GC-MS system and a fixed-bed reactor unit. The composition of lignin (FT-IR, 2D HSQC NMR) was correlated with the composition of the thermal (non-catalytic) pyrolysis oil, while the effect of pyrolysis temperature and catalyst-to-lignin (C/L) ratio, as well as of the Si/Al ratio, acidity, micro/mesoporosity and nano-size of ZSM-5, on bio-oil composition was thoroughly investigated. It was shown that the conventional microporous ZSM-5 zeolites are more selective toward mono-aromatics while the nano-sized and mesoporous ZSM-5 exhibited also high selectivity for (alkyl)phenols. However, the nano-sized ZSM-5 zeolite exhibited the lowest yield of organic bio-oil and highest production of water, coke and non-condensable gases compared to the conventional microporous and mesoporous ZSM-5 zeolites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Emeis, C. A. (1993) · Journal of Catalysis · doi:10.1006/jcat.1993.1145 · Cited by 3,084
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Review of current and future softwood kraft lignin process chemistry
Chakar, F. S., & Ragauskas, A. J. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.016 · Cited by 1,203 · cited 1×
“The most common linkages in lignin structure are ether linkages, such as the β-O-4 which predominates (40–50%) and α-O-4, as well as the 5-5, β-5, β-1, dibenzodioxocin, spirodienone and β-β linkages (Chakar and Ragauskas, 2004; Zakzeski et al., 2010; Rinaldi et al., 2016).”
BackgroundLignin depolymerisation strategies: towards valuable chemicals and fuels
Xu, C., Arancon, R. A. D., Labidi, J., & Luque, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00235k · Cited by 1,031
Stefanidis, S. D., Kalogiannis, K. G., Iliopoulou, E. F., Michailof, C. M., Pilavachi, P. A., & Lappas, A. A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.013 · Cited by 775
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Effect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332 · cited 2×
“It is has been previously shown that the increase of the pyrolysis temperature promotes the decomposition of high molecular weight phenolic oligomers to smaller compounds via depolymerisation and cracking of C-C bonds (Jiang et al., 2010; Wang et al., 2014).”
BackgroundZhang, M., Resende, F. L. P., Moutsoglou, A., & Raynie, D. E. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.05.009 · Cited by 242
Screening heterogeneous catalysts for the pyrolysis of lignin
Jackson, M. A., Compton, D. L., & Boateng, A. A. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.016 · Cited by 187 · cited 3×
“, ZSM-5 with various Si/Al ratio, Beta, Mordenite, Ferrierite, USY) (Jackson et al., 2009; Mihalcik et al., 2011; Li et al., 2012; Ma et al., 2012; Ben and Ragauskas, 2013; Zhang et al., 2014).”
ResultCatalytic fast pyrolysis of aspen lignin via Py-GC/MS
Zhang, M., Resende, F. L. P., & Moutsoglou, A. (2014) · Fuel · doi:10.1016/j.fuel.2013.07.128 · Cited by 159
Depolymerization of organosolv lignin using doped porous metal oxides in supercritical methanol
Warner, G., Hansen, T. S., Riisager, A., Beach, E. S., Barta, K., & Anastas, P. T. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.02.092 · Cited by 108
Custodis, V. B. F., Karakoulia, S. A., Triantafyllidis, K. S., & van Bokhoven, J. A. (2016) · ChemSusChem · doi:10.1002/cssc.201600105 · Cited by 108 · cited 6×
“(Figure 6 and Table S2), in accordance with previous related works on the use of zeolites and especially ZSM-5 in lignin pyrolysis (Jackson et al., 2009; Li et al., 2012; Ben and Ragauskas, 2013; Custodis et al., 2016).”
BackgroundResultInfluentialSelf-citationEnhancing the quality of bio-oil from catalytic pyrolysis of kraft black liquor lignin
Chen, J., Liu, C., Wu, S., Liang, J., & Lei, M. (2016) · RSC Advances · doi:10.1039/c6ra18923g · Cited by 71 · cited 1×
“Absorption bands located at around 1,595, 1,514, 1,462, and 1,427cm−1 were assigned to vibrations of aromatic rings, suggesting they were left intact and that the aromatic structure of lignin was not changed appreciably during the pulping process (Chen et al., 2016; Yang et al., 2016).”
BackgroundCatalytic Fast Pyrolysis of Lignin Over Mesoporous Y Zeolite Using Py-GC/MS
Lee, H. W., Kim, T. H., Park, S. H., Jeon, J.-K., Suh, D. J., & Park, Y.-K. (2013) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2013.7421 · Cited by 34
Conversion of Kraft Lignin Over Hierarchical MFI Zeolite
Kim, S.-S., Lee, H. W., Ryoo, R., Kim, W., Park, S. H., Jeon, J.-K., & Park, Y.-K. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.8545 · Cited by 18
Cited by
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Lignin as a potential source of high-added value compounds: A review
Zevallos Torres, L. A., Lorenci Woiciechowski, A., de Andrade Tanobe, V. O., Karp, S. G., Guimarães Lorenci, L. C., Faulds, C., & Soccol, C. R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121499 · Cited by 389
Zhang, C., Shen, X., Jin, Y., Cheng, J., Cai, C., & Wang, F. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00664 · Cited by 351
Nishu, Liu, R., Rahman, M. M., Sarker, M., Chai, M., Li, C., & Cai, J. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106301 · Cited by 319
Catalytic fast pyrolysis of lignocellulosic biomass: Critical role of zeolite catalysts
Liang, J., Shan, G., & Sun, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110707 · Cited by 267
Metadata
- Authors
- Lazaridis, P. A., Fotopoulos, A. P., Karakoulia, S. A., & Triantafyllidis, K. S.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2018-07-18
- Volume
- 6
- Pages
- 295-295
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W2884294420
- Cited by
- 155
- References
- 19
- FWCI
- 5.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.