Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Open accessThe DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Abstract
Pyrolysis based biorefineries have great potential to convert wastes such as plastic and biomass waste into energy and other valuable products to achieve maximum economic and environmental benefits. In this study, the catalytic pyrolysis of different types of plastics waste (PS, PE, PP, and PET) as single or mixed in different ratios in the presence of modified natural zeolite (NZ) catalysts in a small pilot scale pyrolysis reactor was carried out. The NZ was modified by thermal activation (TA-NZ) at 550°C and acid activation (AA-NZ) with HNO3 to enhance its catalytic properties. The catalytic pyrolysis of PS produced the highest liquid oil (70 and 60%) than PP (40 and 54%) and PE (40 and 42%) using TA-NZ and AA-NZ catalysts respectively. The gas chromatography-mass spectrometry (GC-MS) analysis of oil showed a mixture of aromatics, aliphatic and other hydrocarbon compounds. The TA-NZ and AA-NZ catalysts showed a different effect on the wt.% of catalytic pyrolysis products and liquid oil chemical composition, with AA-NZ showing higher catalytic activity than TA-NZ. FT-IR results showed clear peaks of aromatic compounds in all liquid oil samples with some peaks of alkanes that further confirmed the GC-MS results. The liquid oil has higher heating values (HHV) range of 41.7-44.2 MJ/kg, close to conventional diesel. Therefore, it has the potential to be used as an alternative source of energy and as transportation fuel after refining/ blending with conventional fuels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Self-citationPeterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Waste biorefineries: Enabling circular economies in developing countries
Nizami, A. S., Rehan, M., Waqas, M., Naqvi, M., Ouda, O. K. M., Shahzad, K., Miandad, R., Khan, M. Z., Syamsiro, M., Ismail, I. M. I., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.097 · Cited by 562
Self-citationEffect of plastic waste types on pyrolysis liquid oil
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., Ismail, I. M. I., & Nizami, A. S. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.09.017 · Cited by 505
Self-citationSerrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 457
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Ratnasari, D. K., Nahil, M. A., & Williams, P. T. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.12.027 · Cited by 355
The combustion of organic polymers
Drysdale, D. D. (1981) · Fire Safety Journal · doi:10.1016/0379-7112(81)90020-5 · Cited by 349
Kim, H., Kim, H., Kim, S., et al. (2006) · Thermochimica Acta · doi:10.1016/j.tca.2006.09.013 · Cited by 345
Miandad, R., Barakat, M. A., Rehan, M., Aburiazaiza, A. S., Ismail, I. M. I., & Nizami, A. S. (2017) · Waste Management · doi:10.1016/j.wasman.2017.08.032 · Cited by 338
Self-citationTG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS
Wu, J., Chen, T., Luo, X., Han, D., Wang, Z., & Wu, J. (2014) · Waste Management · doi:10.1016/j.wasman.2013.12.005 · Cited by 277
Wu, C., & Williams, P. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.032 · Cited by 271
Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics
Xue, Y., Johnston, P., & Bai, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.071 · Cited by 262
Developing waste biorefinery in Makkah: A way forward to convert urban waste into renewable energy
Nizami, A. S., Shahzad, K., Rehan, M., Ouda, O. K. M., Khan, M. Z., Ismail, I. M. I., Almeelbi, T., Basahi, J. M., & Demirbas, A. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.04.116 · Cited by 237
Self-citationSeo, Y.-H., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 233
Miandad, R., Nizami, A. S., Rehan, M., Barakat, M. A., Khan, M. I., Mustafa, A., Ismail, I. M. I., & Murphy, J. D. (2016) · Waste Management · doi:10.1016/j.wasman.2016.09.023 · Cited by 219
Self-citationAnalysis of recycled PET bottles products by pyrolysis-gas chromatography
Dimitrov, N., Kratofil Krehula, L., Ptiček Siročić, A., & Hrnjak-Murgić, Z. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.013 · Cited by 215
Miskolczi, N., Bartha, L., & Deák, G. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.056 · Cited by 203
Aguado, J., Sotelo, J. L., Serrano, D. P., Calles, J. A., & Escola, J. M. (1997) · Energy & Fuels · doi:10.1021/ef970055v · Cited by 201
Liquid fuel production from waste tyre pyrolysis and its utilisation in a diesel engine
Frigo, S., Seggiani, M., Puccini, M., & Vitolo, S. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.044 · Cited by 201
Sriningsih, W., Saerodji, M. G., Trisunaryanti, W., Triyono, Armunanto, R., & Falah, I. I. (2014) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2014.03.028 · Cited by 197
Pyrolysis of poly(ethylene terephthalate) in a fluidised bed plant
Yoshioka, T., Grause, G., Eger, C., Kaminsky, W., & Okuwaki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.06.001 · Cited by 193
Recyling of plastic wastes via pyrolysis
Kiran, N., Ekinci, E., & Snape, C. E. (2000) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(00)00052-5 · Cited by 190
Pyrolysis of mixed plastics for the recovery of useful products
Siddiqui, M. N., & Redhwi, H. H. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.01.003 · Cited by 190
Ukei, H., Hirose, T., Horikawa, S., et al. (2000) · Catalysis Today · doi:10.1016/s0920-5861(00)00409-0 · Cited by 175
Effect of zeolite catalysts on pyrolysis liquid oil
Rehan, M., Miandad, R., Barakat, M. A., Ismail, I. M. I., Almeelbi, T., Gardy, J., Hassanpour, A., Khan, M. Z., Demirbas, A., & Nizami, A. S. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.11.015 · Cited by 175
Self-citationA detailed investigation of the products of the thermal degradation of polystyrene
McNeill, I. C., Zulfiqar, M., & Kousar, T. (1990) · Polymer Degradation and Stability · doi:10.1016/0141-3910(90)90002-o · Cited by 174
Gebreslassie, B. H., Slivinsky, M., Wang, B., & You, F. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.10.013 · Cited by 157
Serrano, D. P., Aguado, J., & Escola, J. M. (2000) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(99)00130-7 · Cited by 149
The potential of Saudi Arabian natural zeolites in energy recovery technologies
Nizami, A., Ouda, O. K. M., Rehan, M., El-Maghraby, A. M. O., Gardy, J., Hassanpour, A., Kumar, S., & Ismail, I. M. I. (2015) · Energy · doi:10.1016/j.energy.2015.07.030 · Cited by 141
Self-citationLópez-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Torres, A. (2011) · Waste Management · doi:10.1016/j.wasman.2011.05.021 · Cited by 140
Effects of the types of zeolites on catalytic upgrading of pyrolysis wax oil
Lee, K.-H. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.015 · Cited by 134
Untapped conversion of plastic waste char into carbon-metal LDOs for the adsorption of Congo red
Miandad, R., Kumar, R., Barakat, M. A. E.-F., Basheer, C., Aburiazaiza, A. S., Nizami, A., & Rehan, M. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.10.029 · Cited by 133
Self-citationThermal degradation studies of terephthalate polyesters: 1. Poly(alkylene terephthalates)
McNeill, I. C., & Bounekhel, M. (1991) · Polymer Degradation and Stability · doi:10.1016/0141-3910(91)90119-c · Cited by 131
HZSM5 and HUSY deactivation during the catalytic pyrolysis of polyethylene
Marcilla, A. F., Beltrán, M., Hernández, F., & Navarro, R. (2004) · Applied Catalysis A General · doi:10.1016/j.apcata.2004.09.023 · Cited by 128
Catalytic and thermal depolymerization of low value post-consumer high density polyethylene plastic
Kunwar, B., Moser, B. R., Chandrasekaran, S. R., Rajagopalan, N., & Sharma, B. K. (2016) · Energy · doi:10.1016/j.energy.2016.06.024 · Cited by 127
Lignin pyrolysis for profitable lignocellulosic biorefineries
De Wild, P. J., Huijgen, W. J. J., & Gosselink, R. J. A. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1474 · Cited by 126
Lin, Y., Yang, M.-H., Yeh, T.-F., & Ger, M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.02.015 · Cited by 123
Catalytic degradation of polystyrene over natural clinoptilolite zeolite
Lee, S. Y., Yoon, J., Kim, J. R., & Park, D. W. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00162-8 · Cited by 108
Uemichi, Y., Nakamura, J., Itoh, T., Sugioka, M., Garforth, A. A., & Dwyer, J. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980341+ · Cited by 107
A process study on the pyrolysis of waste polyethylene
Zeaiter, J. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.028 · Cited by 105
Adnan, A., Shah, J., & Jan, M. R. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.01.015 · Cited by 99
Steam activation of pyrolytic tyre char at different temperatures
López, G., Olazar, M., Artetxe, M., Amutio, M., Elordi, G., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.11.002 · Cited by 97
Catalytic Thermal Cracking of Postconsumer Waste Plastics to Fuels. 1. Kinetics and Optimization
Chandrasekaran, S. R., Kunwar, B., Moser, B. R., Rajagopalan, N., & Sharma, B. K. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01083 · Cited by 82
Lee, S., Yoshida, K., & Yoshikawa, K. (2015) · Energy and Environment Research · doi:10.5539/eer.v5n1p18 · Cited by 77
Recycling of Solid Waste for Biofuels and Bio-chemicals
Muthu, S. S., Heimann, K., & Karthikeyan, O. P. (2016) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-10-0150-5 · Cited by 77
Thermal – Catalytic cracking of real MSW into Bio-Crude Oil
Gandidi, I. M., Susila, M. D., Mustofa, A., & Pambudi, N. A. (2016) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.11.005 · Cited by 77
Rizzarelli, P., Rapisarda, M., Perna, S., Mirabella, E. F., Carta, S. L., Puglisi, C., & Valenti, G. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.12.014 · Cited by 75
Deactivation Behaviors of Zeolite and Silica−Alumina Catalysts in the Degradation of Polyethylene
Uemichi, Y., Hattori, M., Itoh, T., Nakamura, J., & Sugioka, M. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970605c · Cited by 73
Catalytic pyrolysis of flame retarded high impact polystyrene over various solid acid catalysts
Ma, C., Yu, J., Wang, B., Song, Z., Xiang, J. H., Hu, S., Su, S., & Sun, L. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.01.018 · Cited by 72
Pyrolytic liquid fuel: A source of renewable electricity generation in Makkah
Rehan, M., Nizami, A., Shahzad, K., Ouda, O. K. M., Ismail, I. M. I., Almeelbi, T. B., Iqbal, T., & Demirbaş, A. (2016) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2016.1153753 · Cited by 69
Self-citationCatalytic recycling of the mixture of polypropylene and polystyrene
Kim, J.-R., Yoon, J.-H., & Park, D. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00266-x · Cited by 63
Conversion of methoxy and hydroxyl functionalities of phenolic monomers over zeolites
Thilakaratne, R., Tessonnier, J., & Brown, R. C. (2015) · Green Chemistry · doi:10.1039/c5gc02548f · Cited by 50
Catalytic degradation of polypropylene over alumina loaded mesoporous catalysts
Obalı, Z., Sezgi, N. A., & Doğu, T. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.146 · Cited by 44
Yield and Composition of Gases and Oils/Waxes from the Feedstock Recycling of Waste Plastic
Williams, P. T. (2006) · doi:10.1002/0470021543.ch11 · Cited by 43
Dawood, A., & Miura, K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00264-6 · Cited by 41
Sarker, M., Mcic, Ficer, MInstP, Mrsc, & Farss. (2013) · Cited by 37
Nileshkumar, K. D., Jani, R. J., Patel, T. M., & Rathod, G. P. (2015) · International Journal For Science Technology And Engineering · Cited by 32
Activation of waste tire char by cyclic liquid-phase oxidation
Heras, F., Jimenez-Cordero, D., Gilarranz, M. A., Alonso-Morales, N., & Rodriguez, J. J. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.06.018 · Cited by 30 · cited 1×
“Several researchers activated the char via steam and thermal activation (Lopez et al., 2009; Heras et al., 2014).”
BackgroundMukherjee, M. K., & Thamotharan, C. (2014) · IOSR Journal of Mechanical and Civil Engineering · doi:10.9790/1684-11214751 · Cited by 17
Inman, M. (2012) · Nature Climate Change · doi:10.1038/nclimate1466 · Cited by 9
Cited by
Gram-scale bottom-up flash graphene synthesis
Luong, D. X., Bets, K. V., Algozeeb, W. A., Stanford, M. G., Kittrell, C., Chen, W., Salvatierra, R. V., Ren, M., McHugh, E. A., Advincula, P. A., et al. (2020) · Nature · doi:10.1038/s41586-020-1938-0 · Cited by 950
Pyrolysis of Polystyrene Waste: A Review
Maafa, I. (2021) · Polymers · doi:10.3390/polym13020225 · Cited by 311
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Moustakas, K., Loizidou, M., Rehan, M., & Nizami, A. S. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109418 · Cited by 275
Self-citation
Metadata
- Authors
- Miandad, R., Rehan, M., Barakat, M. A., Aburiazaiza, A. S., Khan, H., Ismail, I. M. I., Dhavamani, J., Gardy, J., Hassanpour, A., & Nizami, A.-S.
- Venue
- Frontiers in Energy Research
- Publisher
- Frontiers Media SA
- Published
- 2019-03-19
- Volume
- 7
- ISSN
- 2296-598X (ISSN-L)
- OpenAlex
- W2923225912
- Cited by
- 454
- References
- 62
- FWCI
- 14.51
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.