Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
A series of porous carbon materials obtained from biomass waste have been synthesized, with different morphologies and structural properties, and evaluated as potential adsorbents for CO2 capture in post-combustion conditions. These carbon materials present CO2 adsorption capacities, at 25 ºC and 101.3 kPa, comparable to those obtained by other complex carbon or inorganic materials. Furthermore, CO2 uptakes under these conditions can be well correlated to the narrow micropore volume, derived from the CO2 adsorption data at 0 ºC (VDRCO2). In contrast, CO2 adsorption capacities at 25 ºC and 15 kPa are more related to only pores of sizes lower than 0.7 nm. The capacity values obtained in column adsorption experiments were really promising. An activated carbon fiber obtained from Alcell lignin, FCL, presented a capacity value of 1.3 mmol/g (5.7 %wt). Moreover, the adsorption capacity of this carbon fiber was totally recovered in a very fast desorption cycle at the same operation temperature and total pressure and, therefore, without any additional energy requirement. Thus, these results suggest that the biomass waste used in this work could be successfully valorized as efficient CO2 adsorbent, under post-combustion conditions, showing excellent regeneration performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889 · cited 1×
“Besides, availability, low cost, and easy of regeneration are key factors to ensure the feasibility of the overall adsorption process (Plaza et al., 2010, 2014; Samanta et al., 2012; Lee and Park, 2015; Ben-Mansour et al., 2016).”
BackgroundCO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217 · cited 1×
“Post-combustion CCS can be integrated in an easier way into existing facilities and is more flexible with regard to its control and to the plant maintenance [Figueroa et al., 2008; Olajire, 2010; Finkenrath, 2011; IEA and UNIDO (United Nations Industrial Development Organizations, 2011)].”
BackgroundA review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566 · cited 3×
“, 2012), adsorption has shown a great potential to significantly cut down the overall costs by providing substantial energy savings and reduction of the equipment sizes (Ho et al., 2008; Radosz et al., 2008; Davidson, 2009).”
BackgroundMethodHedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424 · cited 1×
“Thus, in this case, further or complete regeneration would require longer desorption times or alternative regeneration strategies, for instance, temperature swing adsorption (Hedin et al., 2013).”
BackgroundImportance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415 · cited 2×
“, Rubiera, F., Pevida, C., and Centeno, T. A. (2010). On the limits of CO2 capture capacity of carbons.”
BackgroundInfluentialAssessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Cited by
Heidari, M., Dutta, A., Acharya, B., & Mahmud, S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.12.003 · Cited by 464
A Review of Chemicals to Produce Activated Carbon from Agricultural Waste Biomass
Ukanwa, K., Patchigolla, K., Sakrabani, R., Anthony, E., & Mandavgane, S. (2019) · Sustainability · doi:10.3390/su11226204 · Cited by 351
Ghimire, P. P., & Jaroniec, M. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.10.014 · Cited by 274
Du, L., Zhang, G., Liu, X., Hassanpour, A., Dubois, M., Tavares, A. C., & Sun, S. (2020) · Carbon Energy · doi:10.1002/cey2.73 · Cited by 120
Functional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review
Zhang, Y., Wang, S., Feng, D., Gao, J., Dong, L., Zhao, Y., Sun, S., Huang, Y., & Qin, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c04372 · Cited by 91
Metadata
- Authors
- Calvo-Muñoz, E. M., García-Mateos, F. J., Rosas, J. M., Rodríguez-Mirasol, J., & Cordero, T.
- Venue
- Frontiers in Materials
- Publisher
- Frontiers Media SA
- Published
- 2016-05-19
- Volume
- 3
- ISSN
- 2296-8016 (ISSN-L)
- OpenAlex
- W2404275102
- Cited by
- 100
- References
- 13
- FWCI
- 5.61
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions. https://app.cochat.ai/papers/10.3389/fmats.2016.00023
- The paper
- Calvo-Muñoz, E. M., García-Mateos, F. J., Rosas, J. M., Rodríguez-Mirasol, J., & Cordero, T. (2016). Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions. Frontiers in Materials. https://doi.org/10.3389/fmats.2016.00023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.