Energy and Economic Costs of Chemical Storage
Open accessThe DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
The necessity of neutralizing the increase of the temperature of the atmosphere by the reduction of greenhouse gas emissions, in particular carbon dioxide (CO2), as well as replacing fossil fuels, leads to a necessary energy transition that is already happening. This energy transition requires the deployment of renewable energies that will replace gradually the fossil fuels. As the renewable energy share increases, energy storage will become key to avoid curtailment or polluting back-up systems. This paper considers a chemical storage process based on the use of electricity to produce hydrogen by electrolysis of water. The obtained hydrogen (H2) can then be stored directly or further converted into methane (CH4 from methanation, if CO2 is available, e.g. from a carbon capture facility), methanol (CH3OH, again if CO2 is available), and/or ammonia (NH3 by an electrochemical process). These different fuels can be stored in liquid or gaseous forms, and therefore with different energy densities depending on their physical and chemical nature. This work aims at evaluating the energy and the economic costs of the production, storage and transport of these different fuels derived from renewable electricity sources. This applied study on chemical storage underlines the advantages and disadvantages of each fuel in the frame of the energy transition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Luo, X., Wang, J., Dooner, M., & Clarke, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.081 · Cited by 3,869 · cited 1×
“…Ibrahim et al., 2008; Chen et al., 2009; Hadjipaschalis et al., 2009; Ferreira et al., 2013; Koohi-Kamali et al., 2013; Kousksou et al., 2014; Lund et al., 2015; Luo et al., 2015; Zakeri and Syri, 2015; Aneke and Wang, 2016; Gallo et al., 2016; Kyriakopoulos and Arabatzis, 2016; Das et al., 2018).”
BackgroundProgress in electrical energy storage system: a critical review
Chen, H., Cong, T. N., Yang, W., Tan, C., Li, Y., & Ding, Y. (2009) · Progress in Natural Science · doi:10.1016/j.pnsc.2008.07.014 · Cited by 3,746
Renewable Power-to-Gas: A technological and economic review
Götz, M., Lefebvre, J., Mörs, F., McDaniel Koch, A., Graf, F., Bajohr, S., Reimert, R., & Kolb, T. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.07.066 · Cited by 2,573 · cited 3×
“These techniques are described in detail in several reference articles, such as Lehner et al. (2014), Vandewalle et al. (2015), Walker et al. (2015), Connolly et al. (2016), Götz et al. (2016), Gallo et al. (2016), Kotter et al. (2016), Mesfun et al. (2017), and Simonis and Newborough (2017).”
BackgroundMethodInfluentialButtler, A., & Spliethoff, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.003 · Cited by 2,510 · cited 3×
“Based on previous works (Schiebahn et al., 2015; Balcombe et al., 2018; Brynolf et al., 2018; Buttler and Spliethoff, 2018; Ghaib and Ben-Fares, 2018), a comparison of the three electrolyser technologies is presented in Table 3 as follows: the nature of the electrolyte, the current maturity, the…”
BackgroundEnergy storage systems—Characteristics and comparisons
IBRAHIM, H., ILINCA, A., & PERRON, J. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.01.023 · Cited by 2,331
Electrical energy storage systems: A comparative life cycle cost analysis
Zakeri, B., & Syri, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.011 · Cited by 1,861
Energy storage technologies and real life applications – A state of the art review
Aneke, M., & Wang, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.097 · Cited by 1,754
Review of energy system flexibility measures to enable high levels of variable renewable electricity
Lund, P. D., Lindgren, J., Mikkola, J., & Salpakari, J. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.057 · Cited by 1,700 · cited 1×
“…Ibrahim et al., 2008; Chen et al., 2009; Hadjipaschalis et al., 2009; Ferreira et al., 2013; Koohi-Kamali et al., 2013; Kousksou et al., 2014; Lund et al., 2015; Luo et al., 2015; Zakeri and Syri, 2015; Aneke and Wang, 2016; Gallo et al., 2016; Kyriakopoulos and Arabatzis, 2016; Das et al., 2018).”
BackgroundCuéllar-Franca, R. M., & Azapagic, A. (2015) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2014.12.001 · Cited by 1,571
Overview of current and future energy storage technologies for electric power applications
Hadjipaschalis, I., Poullikkas, A., & Efthimiou, V. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.09.028 · Cited by 1,500
Cited by
A review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
Kurien, C., & Mittal, M. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114990 · Cited by 515
Power-to-X: A review and perspective.
Palys, M. J., & Daoutidis, P. (2022) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2022.107948 · Cited by 190
Efficiency and optimal load capacity of E-Fuel-Based energy storage systems
Tsiklios, C., Schneider, S., Hermesmann, M., & Müller, T. E. (2023) · Advances in Applied Energy · doi:10.1016/j.adapen.2023.100140 · Cited by 48
Metadata
- Authors
- Dias, V., Pochet, M., Contino, F., & Jeanmart, H.
- Venue
- Frontiers in Mechanical Engineering
- Publisher
- Frontiers Media SA
- Published
- 2020-05-29
- Volume
- 6
- ISSN
- 2297-3079 (ISSN-L)
- OpenAlex
- W3016442457
- Cited by
- 159
- References
- 55
- FWCI
- 6.03
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.