CoChat

Arthrospira platensis Cultivation in a Bench-Scale Helical Tubular Photobioreactor

Open access
Casazza, Alessandro Alberto, de Souza Oliveira, Ricardo Pinheiro, Silva, Milena Fernandes da, Solisio, Carlo, Farias, Charles Bronzo Barbosa, Sarubbo, Leonie Asfora, Converti, Attilio · 2022 · Applied Sciences

The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index; 2 of the 21 sources its claims cite were checked for support.

Abstract

Cultivations of Arthrospira platensis were carried out to evaluate the CO2 capture capacity of this cyanobacterium under bench-scale conditions. For this purpose, the influence of light intensity on the microbial growth and the photosynthetic efficiency has been investigated in a helical photobioreactor. Five cultivations were performed at different photosynthetic photon flux densities (23 ≤ PPFD ≤ 225 µmol photons m−2 s−1) by fed-batch pulse-feeding pure carbon dioxide from a cylinder into the helicoidal photobioreactor. In particular, a range of PPFD (82–190 µmol photons m−2 s−1) was identified in which biomass concentration reached values (9–11 gDW L−1) significantly higher than those reported in the literature for other configurations of closed photobioreactors. Furthermore, as A. platensis suspensions behave as Newtonian and non-Newtonian (pseudoplastic) fluids at very low and high biomass concentrations, respectively, a flow analysis was carried out for evaluating the most suitable mixing conditions depending on growth. The results obtained in this study appear to be very promising and suggest the use of this helicoidal photobioreactor configuration to reduce CO2 emissions from industrial gaseous effluents.

Overview

CoChat Summary

TL;DR

Fed-batch Arthrospira platensis cultivations in a bench-scale helical tubular photobioreactor showed high biomass concentrations at moderate light intensities, with the best growth at PPFD 190 µmol photons m⁻² s⁻¹. The authors propose this configuration for CO₂ capture from industrial gaseous effluents, though only bench-scale fed-batch tests were performed.

Key findings

  • Biomass concentration reached 9–11 g DW L⁻¹ over PPFD 82–190 µmol photons m⁻² s⁻¹, with a maximum Xm = 11.0 g DW L⁻¹ at PPFD = 190 µmol photons m⁻² s⁻¹; at PPFD = 225 µmol photons m⁻² s⁻¹, Xm fell to 4.5 g DW L⁻¹, suggesting photoinhibition.
  • Specific growth rate peaked at 0.62 day⁻¹ at PPFD = 61 µmol photons m⁻² s⁻¹, while maximum cell productivity in Table 1 was 0.59 g DW L⁻¹ day⁻¹ at PPFD = 190 µmol photons m⁻² s⁻¹; empirical equations estimated maxima of 0.527–0.528 g DW L⁻¹ day⁻¹ and 0.600–0.605 day⁻¹ in PPFD ranges 100–120 and 155–170 µmol photons m⁻² s⁻¹.
  • Maximum photosynthetic efficiency was 10.4% at the lowest PPFD (23 µmol photons m⁻² s⁻¹) and decreased with increasing PPFD.
  • Flow analysis gave Reynolds numbers of about 100–600 at 0.05 g DW L⁻¹ and about 600–2500 at 10 g DW L⁻¹; at the selected 1.0 L min⁻¹ recycling flowrate, NRe was about 400 and 1900, the latter about 5% below the 2100 turbulence threshold, which the authors link to minimized mechanical stress.

Methods

  • Arthrospira platensis UTEX LB 1926 was cultivated in Schlösser medium lacking NaHCO₃ and Na₂CO₃, with daily pulse-feeding of pure CO₂, in a 4.0 L bench-scale vertical helical photobioreactor with airlift circulation; pH was controlled at 9.5 ± 0.2 and temperature at 30 °C under continuous fluorescent light.
  • Five fed-batch cultivations were performed at PPFD values of 23, 61, 82, 190, and 225 µmol photons m⁻² s⁻¹, in duplicate; biomass was measured by absorbance at 560 nm, and Xm, PX, µX, and PE were calculated.
  • A flow analysis estimated Reynolds number at culture flowrates of 0.33–1.4 L min⁻¹ using two biomass concentrations (0.05 and 10 g DW L⁻¹), and second-degree polynomial equations were fitted to PX and µX versus PPFD.

Limitations

  • The paper does not include a dedicated limitations section; it states that future efforts will deal with continuous application of the photobioreactor for CO₂ capture or mixotrophic wastewater treatment, and notes that optimal results were obtained under lower light intensity than sunlight.
  • Evident from the text: the study is bench-scale (4.0 L working volume), uses only five PPFD conditions, and is fed-batch with pulse CO₂ feeding rather than continuous long-term operation or actual industrial gaseous effluent testing.
  • The flow analysis uses only two representative biomass concentrations and reports an NRe about 5% below the turbulence threshold, so mixing conclusions are based on estimated rather than fully turbulent conditions.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/app12031311

Cites

55 of 55 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

1 Valid · 0 Not valid · 18 Not checked · 16 Own results and interpretations

8 more claims

Create a free account to see all 35 claims and to verify the 19 references still open.

See all claims — free account
  • It may state two separate claims as one. 12
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 10

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Research works printed but not linked: 2

  1. Zarrouk, C. (1966). Contribution à l’Ètude d’Une Cyanophycèe. Influence de Divers Facteurs Physiques et Chimiques sur la Croissance et la Photosynthèse de Spirulina Maxima (Setch. et Gardner) Geitler. [Ph.D. Thesis, University of Paris].
  2. Vonshak, A. (1997). Tubular Bioreactors. Spirulina platensis (Arthrospira): Physiology, Cell-Biology and Biotechnology, Taylor & Francis. · DOI · Paper page

Cited by

See all 17

Metadata

Authors
Casazza, A. A., de Souza Oliveira, R. P., Silva, M. F. D., Solisio, C., Farias, C. B. B., Sarubbo, L. A., & Converti, A.
Affiliations
  • University of Genoa (IT)
  • Biochemical and Pharmaceutical Technology Department, Faculty of Pharmaceutical Sciences, São Paulo University, Av. Prof. Lineu Prestes, 580, Bl 16, São Paulo 05508-900, Brazil
  • Centro de Tecnologias Estratégicas do Nordeste (BR)
  • Universidade Federal Rural de Pernambuco (BR)
  • Universidade Católica de Pernambuco (BR)
  • Department of Civil, Chemical and Environmental Engineering, University of Genoa, Via Opera Pia 15, 16145 Genoa, Italy
Venue
Applied Sciences
Publisher
MDPI AG
Published
2022-01-26
Volume
12
Issue
3
Pages
1311
ISSN
2076-3417 (ISSN-L)
OpenAlex
W4210746137
Cited by
17
References
55
Citations by year
2026: 5 · 2025: 5 · 2024: 2 · 2023: 2 · 2022: 3
FWCI
0.54
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • CINECA IRIS Institutial Research Information System (University of Genoa) (submittedVersion, other-oa)
Funders
University of Genoa (FRA 2020)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Fluid Dynamics and Mixing
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
Keywords
Spirulina platensis, CO2 capture, cyanobacterial cultivation, photosynthetic photon flux density, light intensity, photosynthetic efficiency, biomass concentration, non-Newtonian flow, pseudoplastic flow, mixing conditions, industrial CO2 emissions

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-01, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-01 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.