The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index; none of the 26 sources its claims cite is checked for support yet.
Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels
Open accessAbstract
Biological composites such as bone, nacre, and teeth show excellent mechanical efficiency because of the incorporation of biominerals into the organic matrix at the nanoscale, leading to hierarchical composite structures. Adding a large volume of ceramic nanoparticles into an organic molecular network uniformly has been a challenge in engineering applications. However, in natural organisms, biominerals grow inside organic fibers, such as chitin and collagen, forming perfect ceramic/polymer composites spontaneously via biomineralization processes. Inspired from these processes, the in situ growth of calcium carbonate nanoparticles inside the chitosan network to form ceramic composites was proposed in the current work. The crystal growth of CaCO3 nanoparticles in the chitosan matrix as a function of time was investigated. A weight percentage of ~35 wt% CaCO3 composite was realized, resembling the high weight percentage of mineral phase in bones. Scanning and transmission electron microscopy indicated the integration of CaCO3 nanocrystals with chitosan macromolecules. By growing CaCO3 minerals inside the chitosan matrix, the elastic modulus and tensile strength increases by ~110% and ~90%, respectively. The in situ crystal growth strategy was also demonstrated in organic frameworks prepared via 3D printing, indicating the potential of fabricating ceramic/polymer composites with complicated structures, and further applications in tissue engineering.
Overview
CoChat Summary
TL;DR
The paper reports in situ growth of CaCO₃ nanocrystals inside 3D-printed chitosan hydrogels via sequential Ca²⁺ and CO₃²⁻ diffusion, mimicking biomineralization. Mineralization for 1 h gave the best tensile properties, with ~110% higher Young’s modulus and ~90% higher tensile strength than the unmineralized hydrogel.
Key findings
- CaCO₃ formed as calcite within the chitosan matrix: XRD matched the calcite standard pattern, Raman showed a carbonate peak near 1084 cm⁻¹, FTIR showed carbonate peaks near 1373, 870, and 710 cm⁻¹, and WAXD showed diffraction rings consistent with CaCO₃.
- Crystal size depended on location and time: after 12 h, surface microcrystals averaged 5–6 µm, while cross-section nanoparticles averaged ~100 nm; after 3 h, most nanoparticles were 80–100 nm even in center areas, and 6 h results were similar to 3 h, indicating diffusion was no longer the main limiting mechanism.
- TGA of the 12 h mineralized sample gave a final CaCO₃ mass fraction of approximately 13%, although the abstract states a ~35 wt% CaCO₃ composite was realized.
- The 1 h mineralized sample showed the best mechanical properties: Young’s modulus increased by ~110% and tensile strength by ~90% versus pre-mineralized hydrogel. Table 1 reports 0 min: E = 5.59 ± 0.34 MPa, σ = 4.64 ± 0.50 MPa, strain = 73.64 ± 6.68%; 1 h: E = 11.68 ± 1.38 MPa, σ = 8.72 ± 2.90 MPa, strain = 68.05 ± 19.15%; longer mineralization reduced properties, e.g., 12 h: E = 6.96 ± 0.21 MPa, σ = 2.42 ± 0.54 MPa.
Methods
- Chitosan hydrogel preparation: 8 wt% chitosan in 0.5 M acetic acid, degassed, 3D printed with a self-assembled extrusion printer at 3 mm/s using a 400 µm needle and 800 µm pitch, then neutralized in 1 M NaOH for 6 h and rinsed.
- In situ mineralization: hydrogel immersed in 0.1 M CaCl₂ for 24 h, then in 0.1 M NaHCO₃ for 5 min to 12 h at room temperature, followed by rinsing.
- Characterization and testing: SEM, TEM, XRD, Raman, FTIR, WAXD, and TGA; wet-state uniaxial tensile tests; diffusion analyzed with Fick’s second law simplified to a one-dimensional semi-infinite solid model.
Limitations
- Stated: the next step is optimizing the mineralization process and adjusting conditions to more precisely regulate crystal growth; future work can explore materials beyond CaCO₃ and chitosan; the study was not applicable to humans or animals.
- Evident: the abstract’s ~35 wt% CaCO₃ claim is not consistent with the TGA result of ~13% CaCO₃ mass fraction for the 12 h sample.
- Evident: mechanical characterization is limited to wet-state uniaxial tensile tests, and no biological, cell, or in vivo validation is reported despite the tissue-engineering motivation; the diffusion analysis is simplified to a 1D semi-infinite model.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures






![Figure 6 TEM images of chitosan/CaCO3 composite hydrogel. ( a , b ) TEM image of nanoparticles formed via in situ growth. ( c -f ) TEM images and diffraction pa tt erns of chitosan/CaCO3 composite hydrogel. Nanoparticles shows single crystal-like diffraction pa tt ern. Amorphous regions are noticed inside and on the edge of the calcite nanoparticles. ( g , h ) TEM images of the nanocomposite coating in mantis shrimp dactyl clubs, showing the combination of chitin macromolecules and hyFigure 6. TEM images of chitosan/CaCO3 composite hydrogel. ( a , b ) TEM image of nanoparticles formed via in situ growth. ( c -f ) TEM images and diffraction patterns of chitosan/CaCO3 composite hydrogel. Nanoparticles shows single crystal-like diffraction pattern. Amorphous regions are noticed inside and on the edge of the calcite nanoparticles. ( g , h ) TEM images of the nanocomposite coating in mantis shrimp dactyl clubs, showing the combination of chitin macromolecules and hydroxyapatite nanocrystals. Images are taken from [16] with permission.](https://figures.cochat.ai/paper-figures/e05d46d41a84452e8df722bc21881f68/biomineralization-process-inspired-in-situ-growth-of-calcium-carbonate-figure-6.png)


Verification
Claims the paper makes
0 Valid · 0 Not valid · 14 Not checked · 97 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The results indicate that CaCO 3 nanoparticles were successfully encapsulated within the cross-linked chitosan layer, forming a chitosan/CaCO 3 composite hydrogel structure.”
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > 3.1. Structure and Composition of Chitosan/CaCO 3 Composites
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“The experimental results indicate a 17% increase in tensile strength compared to the microfiber chitosan hydrogel network prepared by Wu et al. [28] using 3D printing technology.”
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > 3.3. Mechanical Properties of Chitosan/CaCO 3 Composites
What the sources say
- Not checked yetcites Wu et al. [28] Wu, Q., Maire, M., Lerouge, S., Therriault, D., and Heuzey, M.C. (2017). 3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth. Adv. Biosyst., 1. source
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Nanoparticles shows single crystal-like diffraction pattern.”
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > 4. Conclusions and Outlook
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Furthermore, wide-angle X-ray diffraction (WAXD) analysis confirmed that, compared to the diffraction pattern of chitosan (Figure 3e), the mineralized samples exhibited diffraction rings consistent with CaCO 3 (Figure 3f).”
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > 3.1. Structure and Composition of Chitosan/CaCO 3 Composites
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A weight percentage of ~35 wt% CaCO 3 composite was realized, resembling the high weight percentage of mineral phase in bones.”
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
74 more claims
Create a free account to see all 111 claims and to verify the 26 references still open.
- The quote only partly states this claim. 2
- It may state two separate claims as one. 16
- Probably not a substantial claim. 16
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > 4. Conclusions and Outlook
“Compared to the unmineralized chitosan films, mineralized films show an increase in both stiffness and tensile strength.”
§ Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels > 4. Conclusions and Outlook
“| 0 min | 5.59 ± 0.34 | 4.64 ± 0.50 | 73.64 ± 6.68 | | 5 min | 13.84 ± 2.15 | 6.68 ± 1.71 | 54.87 ± 9.67 | | 30 min | 10.91 ± 0.86 | 5.74 ± 1.03 | 57.68 ± 7.21 | | 1 h | 11.68 ± 1.38 | 8.72 ± 2.90 | 68.05 ± 19.15 | | 3 h | 13.88 ± 3.11 | 5.37 ± 1.13 | 46.34 ± 3.41 | | 6 h | 12.15 ± 1.57 | 6.00 ± 0.63 | 52.12 ± 8.04 | | 12 h | 6.96 ± 0.21 | 2.42 ± 0.54 | 44.47 ± 8.06 |”
Citations
Cites
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Chitosan: A versatile biopolymer for orthopaedic tissue-engineering
Di Martino, A., Sittinger, M., & Risbud, M. V. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.016 · Cited by 1,634
Synthetic nacre by predesigned matrix-directed mineralization
Mao, L.-B., Gao, H.-L., Yao, H.-B., Liu, L., Cölfen, H., Liu, G., Chen, S.-M., Li, S.-K., Yan, Y.-X., Liu, Y.-Y., et al. (2016) · Science · doi:10.1126/science.aaf8991 · Cited by 983
Fick’s Law Algorithm: A physical law-based algorithm for numerical optimization
Hashim, F. A., Mostafa, R. R., Hussien, A. G., Mirjalili, S., & Sallam, K. M. (2023) · Knowledge-Based Systems · doi:10.1016/j.knosys.2022.110146 · Cited by 295
An overview of chitin or chitosan/nano ceramic composite scaffolds for bone tissue engineering
Deepthi, S., Venkatesan, J., Kim, S.-K., Bumgardner, J. D., & Jayakumar, R. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.03.041 · Cited by 287
Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems
Szwed-Georgiou, A., Płociński, P., Kupikowska-Stobba, B., Urbaniak, M. M., Rusek-Wala, P., Szustakiewicz, K., Piszko, P., Krupa, A., Biernat, M., Gazińska, M., et al. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00609 · Cited by 269
A natural impact-resistant bicontinuous composite nanoparticle coating
Huang, W., Shishehbor, M., Guarín-Zapata, N., Kirchhofer, N. D., Li, J., Cruz, L., Wang, T., Bhowmick, S., Stauffer, D., Manimunda, P., et al. (2020) · Nature Materials · doi:10.1038/s41563-020-0768-7 · Cited by 258
Self-citationCrystal Growth of Calcium Carbonate in Hydrogels as a Model of Biomineralization
Asenath‐Smith, E., Li, H., Keene, E. C., Seh, Z. W., & Estroff, L. A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200300 · Cited by 230
Cited by
Kumar, K. P., Mehar, K., Choudhury, S., Amitkumar, D. D., Pandey, A. K., Rajendran, N. K., Paul, B., & Samrat, A. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.115216 · Cited by 5
Aghili, H., Khodayari, E., Deylaghian, S., Nikooee, E., Parvizmonfared, E., Javadpour, S., Ansari, M., & Jahanmard, M. R. (2026) · Heliyon · doi:10.1016/j.heliyon.2026.e44589 · Cited by 5
Wang, Z., Yang, Y., Zhou, W., Lu, X., Tian, Y., Ao, Z., Li, S., & Xu, H. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111833 · Cited by 3
Xu, X., Yang, X. J., Gao, T., Zhu, J., He, C., Jin, T., Dong, J., Lee, I.-S., Chen, C., & Liu, F. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag128 · Cited by 2
Ma, C., Zhao, W. F., Zhang, H., Gao, S., Bi, J., Lv, Y., Wang, W., & Rao, W.-F. (2025) · Materials Science and Technology · doi:10.1177/02670836251383850
Metadata
- Authors
- Zeng, X., Zhu, Z., Chang, W., Wu, B., & Huang, W.
- Affiliations
- State Key Laboratory of Materials Processing and Die & Mould Technology (CN)
- Corresponding author
- Huang, Wei
- ORCID
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2024-10-10
- Volume
- 14
- Issue
- 20
- Pages
- 9193
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W4403301534
- Cited by
- 11
- References
- 42
- Citations by year
- 2026: 8 · 2025: 3
- FWCI
- 0.81
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Rare & Special e-Zone (The Hong Kong University of Science and Technology) (submittedVersion)
- Funders
- National Natural Science Foundation Council of China (52305359, 2023AFB141)
- Hubei Provincial Natural Science Foundation of China (52305359, 2023AFB141)
- Huazhong University of Science and Technology (52305359, 2023AFB141)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
- Keywords
- biomineralization, chitosan hydrogel, in situ crystal growth, polymer-ceramic composites, hierarchical composites, elastic modulus, tensile strength, tissue engineering, biomimetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels. https://app.cochat.ai/papers/10.3390/app14209193
- The paper
- Zeng, X., Zhu, Z., Chang, W., Wu, B., & Huang, W. (2024). Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels. Applied Sciences. https://doi.org/10.3390/app14209193
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.