The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Open accessAbstract
In the circular economy, products, components, and materials are aimed to be kept at the utility and value all the lifetime. For this purpose, repair and remanufacturing are highly considered as proper techniques to return the value of the product during its life. Directed Energy Deposition (DED) is a very flexible type of additive manufacturing (AM), and among the AM techniques, it is most suitable for repairing and remanufacturing automotive and aerospace components. Its application allows damaged component to be repaired, and material lost in service to be replaced to restore the part to its original shape. In the past, tungsten inert gas welding was used as the main repair method. However, its heat affected zone is larger, and the quality is inferior. In comparison with the conventional welding processes, repair via DED has more advantages, including lower heat input, warpage and distortion, higher cooling rate, lower dilution rate, excellent metallurgical bonding between the deposited layers, high precision, and suitability for full automation. Hence, the proposed repairing method based on DED appears to be a capable method of repairing. Therefore, the focus of this study was to present an overview of the DED process and its role in the repairing of metallic components. The outcomes of this study confirm the significant capability of DED process as a repair and remanufacturing technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Climate change 2007 - mitigation of climate change
Metz, B., Davidson, O. R., Bösch, P., Dave, R., & Meyer, L. (2007) · Cited by 3,484
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Residual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Wilson, J. M., Piya, C., Shin, Y. C., Zhao, F., & Ramani, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.084 · Cited by 543
Baufeld, B., Brandl, E., & der Biest, O. V. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.01.018 · Cited by 537
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Reducing waste: repair, recondition, remanufacture or recycle?
King, A. M., Burgess, S. C., Ijomah, W., & McMahon, C. A. (2006) · Sustainable Development · doi:10.1002/sd.271 · Cited by 502
Liu, Z. H., Zhang, D. Q., Sing, S. L., Chua, C. K., & Loh, L. E. (2014) · Materials Characterization · doi:10.1016/j.matchar.2014.05.001 · Cited by 415
Ahn, D.-G. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0048-9 · Cited by 268
Onuike, B., Heer, B., & Bandyopadhyay, A. K. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.007 · Cited by 232
A repair and overhaul methodology for aeroengine components
Yilmaz, O., Gindy, N., & Gao, J. (2010) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2009.07.001 · Cited by 227
Griffith, M. L., Ensz, M. T., Puskar, J. D., Robino, C. V., Brooks, J. A., Philliber, J. A., Smugeresky, J. E., & Hofmeister, W. H. (2000) · MRS Proceedings · doi:10.1557/proc-625-9 · Cited by 225
Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Tchoufang Tchuindjang, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.035 · Cited by 194
Component repair using laser direct metal deposition
Pinkerton, A. J., Wang, W., & Li, L. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem1008 · Cited by 179
Stainless steel to titanium bimetallic structure using LENS™
Sahasrabudhe, H., Harrison, R., Carpenter, C. B., & Bandyopadhyay, A. K. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.10.002 · Cited by 178
Kistler, N. A., Corbin, D. J., Nassar, A. R., Reutzel, E. W., & Beese, A. M. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.08.041 · Cited by 175
Leino, M., Pekkarinen, J., & Soukka, R. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.077 · Cited by 174
Laser Beam Build-Up Welding: Precision in Repair, Surface Cladding, and Direct 3D Metal Deposition
Nowotny, S., Scharek, S., Beyer, E., & Richter, K.-H. (2007) · Journal of Thermal Spray Technology · doi:10.1007/s11666-007-9028-5 · Cited by 162
Bi, G., & Gasser, A. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.051 · Cited by 139
Laser Cladding of Vanadium-Carbide Tool Steels for Die Repair
Leunda, J., Soriano, C., Sanz, C., & Navas, V. G. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.044 · Cited by 138
Microstructure modelling of laser metal powder directed energy deposition of alloy 718
Kumara, C., Segerstark, A., Hanning, F., Dixit, N., Joshi, S. V., Moverare, J. J., & Nylén, P. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.11.024 · Cited by 116
Characteristics of the bond in Cu–H13 tool steel parts fabricated using SLM
Al-Jamal, O. M., Hinduja, S., & Li, L. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.010 · Cited by 106
Component repair using HVOF thermal spraying
Tan, J. C., Looney, L., & Hashmi, M. S. J. (1999) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(99)00113-2 · Cited by 102
Liu, L., Zhuang, Z., Liu, F., & Zhu, M. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5191-7 · Cited by 94
Acharya, R., & Das, S. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2912-6 · Cited by 93
Liang, Y.-J., Liu, D., & Wang, H. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.11.002 · Cited by 85
An investigation into stainless-steel/structural-alloy-steel bimetal produced by shell mould casting
Şimşir, M., Kumruoğlu, L. C., & Özer, A. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.04.074 · Cited by 78
Partitioning of laser energy during directed energy deposition
Lia, F., Park, J., Tressler, J. F., & Martukanitz, R. P. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.012 · Cited by 77
Yu, J.-H., Choi, Y. S., Shim, D.-S., & Park, S. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.04.007 · Cited by 75
Xiong, B., Cai, C., Wan, H., & Lu, B. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.01.006 · Cited by 74
Plasma transferred arc repair welding of the nickel-base superalloy IN-738LC
Su, C. Y., Chou, C. P., Wu, B., & Lih, W. (1997) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-997-0055-7 · Cited by 63
Laser reconditioning of crankshafts: From lab to application
Köhler, H., Partes, K., Seefeld, T., & Vollertsen, F. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.160 · Cited by 57
Zhang, X., Li, W., Cui, W., & Liou, F. (2017) · Manufacturing Letters · doi:10.1016/j.mfglet.2017.11.001 · Cited by 53
Microstructure and mechanical properties of carbon steel A210–superalloy Sanicro 28 bimetallic tubes
Gómez, X., & Echeberría, J. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00686-x · Cited by 49
Co-extrusion of dissimilar sintered P/M preforms—An explored route to produce bimetallic tubes
Krishna, B. V., Venugopal, P., & Rao, K. P. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.06.025 · Cited by 33
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Laser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
Metadata
- Authors
- Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-08-13
- Volume
- 9
- Issue
- 16
- Pages
- 3316
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2967833934
- Cited by
- 537
- References
- 39
- FWCI
- 24.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.