Battery Internal Temperature Measurement Using LC Resonant Tank for Battery Management Systems
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
This paper suggests an embedded battery impedance measurement based on an Inductor Capacitor (LC) resonant tank to measure the battery’s internal temperature for battery management systems (BMS). The purpose of the BMS is to provide state-of-charge (SoC) balancing and the preheating mechanism at sub-zero temperatures. Battery Impedance Spectroscopy (BIS) for battery internal temperature measurement is achieved by an LC resonant tank connected to the batteries in parallel to induce created resonant current and voltage into the battery. The peaks of the voltage and current waveforms are measured and recorded. Then, the resistance of the battery can be calculated by comparing the peak voltage and current waveforms. Since the resistance of the battery is affected by the battery’s internal temperature, the internal temperature of the battery can be estimated. The benefit of using the LC tank for the battery’s internal temperature is to reduce data processing since no window and Fast Fourier Transform (FFT) is needed for this method. In addition, the proposed method measures the battery’s internal temperature without any internal or external temperature sensor. Power Simulation (PSIM) simulation software is used in this proposed method. Panasonic batteries 18650 and a dSPACE DS1104 are used for the experiment to verify the proposed method. The proposed method shows that the LC resonant tank can measure three batteries B1, B2, and B3 internal resistance with 17.87%, 18.14%, and 17.73% errors compared to the Frequency Response Analyzer (FRA). In addition, the total time needed for balancing is 400 s, and the total energy consumed by the preheating mechanism is 0.214%/°C to preheat the lithium-ion batteries (LIBs) from −5 °C to 10 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Embedded EIS into: ( a ) BMS [21]; ( b ) battery charger [22]. Figure 1. Embedded EIS into: ( a ) BMS [21]; ( b ) battery charger [22].](https://figures.cochat.ai/paper-figures/6249343e6d9b4962a45ea6bcf2cb3bbb/battery-internal-temperature-measurement-using-lc-resonant-tank-for-battery-figure-1.png)



![Figure 5 Operating modes for the preheating mechanism and SoC balancing [16]. Figure 5. Operating modes for the preheating mechanism and SoC balancing [16].](https://figures.cochat.ai/paper-figures/0403d68ef8b74428b12d27548b56f9e8/battery-internal-temperature-measurement-using-lc-resonant-tank-for-battery-figure-5.png)











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“if a battery is not under a controlled temperature value, the SOH estimation models and algorithms need to take temperature variations into account [34,35].”
From An Electrochemical Impedance Spectrum-Based State of Health Differential Indicator with Reduced Sensitivity to Measurement Errors for Lithium–Ion Batteries (2024) · cites this paper as [34]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“The characteristics and capacity of a lithium-ion battery changes as a function of temperature.”
From An Electrochemical Impedance Spectrum-Based State of Health Differential Indicator with Reduced Sensitivity to Measurement Errors for Lithium–Ion Batteries (2024) · cites this paper as [34]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport Aircraft
Sarlioglu, B., & Morris, C. T. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2426499 · Cited by 1,261
A review on prognostics and health monitoring of Li-ion battery
Zhang, J., & Lee, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.101 · Cited by 792
Battery Energy Storage System (BESS) and Battery Management System (BMS) for Grid-Scale Applications
Lawder, M. T., Suthar, B., Northrop, P. W. C., De, S., Hoff, C. M., Leitermann, O., Crow, M. L., Santhanagopalan, S., & Subramanian, V. R. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2317451 · Cited by 713
Electric vehicle battery technologies: From present state to future systems
Manzetti, S., & Mariasiu, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.010 · Cited by 533
Modeling of the Cost of EV Battery Wear Due to V2G Application in Power Systems
Zhou, C., Qian, K., Allan, M., & Zhou, W. (2011) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2159977 · Cited by 495
Factors Limiting Li+Charge Transfer Kinetics in Li-Ion Batteries
Jow, T. R., Delp, S. A., Allen, J. L., Jones, J.-P., & Smart, M. C. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1221802jes · Cited by 437
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Lin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
An Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application
Zhang, J., Zhang, L., Sun, F., & Wang, Z. (2018) · IEEE Access · doi:10.1109/access.2018.2824838 · Cited by 344
Instantaneous measurement of the internal temperature in lithium-ion rechargeable cells
Srinivasan, R., Carkhuff, B. G., Butler, M. H., & Baisden, A. C. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.136 · Cited by 218
Alipour, M., Ziebert, C., Conte, F. V., & Kizilel, R. (2020) · Batteries · doi:10.3390/batteries6030035 · Cited by 200
An Improved Battery Characterization Method Using a Two-Pulse Load Test
Coleman, M., Hurley, W. G., & Lee, C. K. (2008) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2007.914329 · Cited by 191
Low-Temperature Characterization of Lithium-Ion Carbon Anodes via Microperturbation Measurement
Wang, C., Appleby, A. J., & Little, F. E. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1474427 · Cited by 100
Abe, Y., Hori, N., & Kumagai, S. (2019) · Energies · doi:10.3390/en12234507 · Cited by 99
Fortier, A., Tsao, M., Williard, N., Xing, Y., & PECHT, M. G. (2017) · Energies · doi:10.3390/en10070838 · Cited by 98
Zheng, H., Zhang, H., Fu, Y., Abe, T., & Ogumi, Z. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp051238i · Cited by 78
Core temperature modelling and monitoring of lithium-ion battery in the presence of sensor bias
Sun, L. N., Sun, W., & You, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115243 · Cited by 77
Farmann, A., Waag, W., & Sauer, D. U. (2016) · Energy · doi:10.1016/j.energy.2016.06.088 · Cited by 64
Pulse resistance based online temperature estimation for lithium-ion cells
Ludwig, S., Zilberman, I., Horsche, M. F., Wohlers, T., & Jossen, A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229523 · Cited by 44
Towards impedance‐based temperature estimation for Li‐ion battery packs
Beelen, H. P. G. J., Shivakumar, K. M., Raijmakers, L. H. J., Donkers, M. C. F., & Bergveld, H. J. (2020) · International Journal of Energy Research · doi:10.1002/er.5107 · Cited by 36
Zhang, H., Lu, R., Zhu, C., & Yongping, Z. (2014) · International Journal of u- and e- Service Science and Technology · doi:10.14257/ijunesst.2014.7.4.27 · Cited by 28
Simatupang, D. P., & Park, S.-Y. (2022) · IEEE Access · doi:10.1109/access.2022.3217095 · Cited by 28
Self-citationAdvances in Li-Ion Battery Management for Electric Vehicles
Morello, R., Rienzo, R. D., Roncella, R., Saletti, R., Schwarz, R., Lorentz, V., Hoedemaekers, E., Rosca, B., & Baronti, F. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591185 · Cited by 23
Simatupang, D. P., & Choi, J. (2018) · Energies · doi:10.3390/en11112927 · Cited by 20
Self-citationEffect of temperature and charge stand on performance of lithium-ion polymer pouch cell
Kumar, A., Satyavani, T. V. S. L., & Senthilkumar, M. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.02.002 · Cited by 15
Versatile AC Current Control Technique for a Battery Using Power Converters
Islam, S., & Park, S.-Y. (2021) · Batteries · doi:10.3390/batteries7030047 · Cited by 3
Self-citationInternal Resistance Measurement of Lithiumion Batteries using LC Resonant Tank
Benshatti, A., Islam, S. R., Link, T., & Park, S.-Y. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773510 · Cited by 2
Self-citation
Cited by
Basheer, Y., Qaisar, S. M., Waqar, A., Lateef, F., & Alzahrani, A. (2023) · IEEE Access · doi:10.1109/access.2023.3300228 · Cited by 28
“The system is designed to measure the battery’s internal temperature [34].”
BackgroundSajid, A. H., Altamimi, A., Kazmi, S. A. A., & Khan, Z. A. (2024) · IEEE Access · doi:10.1109/access.2024.3359032 · Cited by 27
Monitoring and control of internal temperature in power batteries: A comprehensive review
Guo, X., Yang, Y., Shi, C., Xu, M., Liu, Y., & Zou, D. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104051 · Cited by 52
Online Battery Impedance Identification Based on Small AC Signal Injection of Inverter
Qu, H., Luo, D., Jiang, D., Zhou, M. J., Zhao, X., & Sun, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3463795 · Cited by 16
Abu Qahouq, J. (2024) · Batteries · doi:10.3390/batteries10100368 · Cited by 13
“Therefore, if a battery is not under a controlled temperature value, the SOH estimation models and algorithms need to take temperature variations into account [34,35].”
Metadata
- Authors
- Simatupang, D., Benshatti, A., & Park, S.-Y.
- Affiliations
- University of Connecticut (US)
- Corresponding author
- Simatupang, Desmon
- Venue
- Batteries
- Publisher
- MDPI AG
- Published
- 2023-02-02
- Volume
- 9
- Issue
- 2
- Pages
- 104
- ISSN
- 2313-0105 (ISSN-L)
- OpenAlex
- W4319083688
- Cited by
- 12
- References
- 28
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 5 · 2023: 1
- FWCI
- 0.87
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Batteries (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Science Foundation (1454578)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Keywords
- LC resonant tank, battery management systems, battery internal resistance, lithium-ion batteries, battery balancing, battery preheating, sensorless temperature estimation, 18650 cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.