Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 195 of the 196 references it cites were found in a registry or an index.

Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics

Open access
Stepanovska, Jana, Supova, Monika, Hanzalek, Karel, Broz, Antonin, Matejka, Roman · 2021 · Biomedicines

Abstract

Bioprinting is a modern tool suitable for creating cell scaffolds and tissue or organ carriers from polymers that mimic tissue properties and create a natural environment for cell development. A wide range of polymers, both natural and synthetic, are used, including extracellular matrix and collagen-based polymers. Bioprinting technologies, based on syringe deposition or laser technologies, are optimal tools for creating precise constructs precisely from the combination of collagen hydrogel and cells. This review describes the different stages of bioprinting, from the extraction of collagen hydrogels and bioink preparation, over the parameters of the printing itself, to the final testing of the constructs. This study mainly focuses on the use of physically crosslinked high-concentrated collagen hydrogels, which represents the optimal way to create a biocompatible 3D construct with sufficient stiffness. The cell viability in these gels is mainly influenced by the composition of the bioink and the parameters of the bioprinting process itself (temperature, pressure, cell density, etc.). In addition, a detailed table is included that lists the bioprinting parameters and composition of custom bioinks from current studies focusing on printing collagen gels without the addition of other polymers. Last but not least, our work also tries to refute the often-mentioned fact that highly concentrated collagen hydrogel is not suitable for 3D bioprinting and cell growth and development.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/biomedicines9091137

Cites

195 of 195 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Design and phases of the bioprinting process.
Figure 1 Design and phases of the bioprinting process.CC BY · PubMed Central
Figure 2 The Prisma workflow diagram of the article search.
Figure 2 The Prisma workflow diagram of the article search.CC BY · PubMed Central
Figure 3 Collagen and its non-enzymatic (A) and enzymatic divalent (B) and trivalent (C) nature crosslinks.
Figure 3 Collagen and its non-enzymatic (A) and enzymatic divalent (B) and trivalent (C) nature crosslinks.CC BY · PubMed Central
Figure 4 Formation of hydrogel from the same source of collagen however isolated by different way. (A) phosphate buffer pre-treatment and extraction by 0.1 M acetic acid; collagen gelled only locally (B) ethanol pre-treatment and extraction by 0.02 M acetic acid followed by neutralization by 0.1 M NaOH to pH = 7, collagen precipitate is centrifugated and dissolved again in 0.02 M acetic acid; collagen gelled completely.
Figure 4 Formation of hydrogel from the same source of collagen however isolated by different way. (A) phosphate buffer pre-treatment and extraction by 0.1 M acetic acid; collagen gelled only locally (B) ethanol pre-treatment and extraction by 0.02 M acetic acid followed by neutralization by 0.1 M NaOH to pH = 7, collagen precipitate is centrifugated and dissolved again in 0.02 M acetic acid; collagen gelled completely.CC BY · PubMed Central
Figure 5 Porcine stromal cells in 3D printed collagen hydrogel (15 mg/mL), substrate coverslip glass, red F-actin, blue cell nuclei. (A) 3D image from confocal microscopy. (B) side projection from confocal microscopy. (C) printing process on substrate fixed using heated vacuum bed. The microscopy image was acquired on Andor Dragonfly spinning disk confocal system with high-speed CMOS camera Zyla 4.2 (Andor Technology Ltd., Belfast, UK) mounted on Leica DMi8 inversed fully mechanized microscope (Leica, Wetzlar, Germany) using 20× lens (NA = 0.75) with water immersion. The wavelengths of the excitation lasers were 405 nm and 561 nm and the transmission characteristics of the emission filters were 450/50 nm and 600/50 nm. Used disk pinhole diameter was 40 µm. The hydrogel samples were photographed in PBS buffer in 35 mm Petri dish with #1.5 glass bottom (0.17 mm thickness, Cellvis, Sunnyvale, CA, USA).
Figure 5 Porcine stromal cells in 3D printed collagen hydrogel (15 mg/mL), substrate coverslip glass, red F-actin, blue cell nuclei. (A) 3D image from confocal microscopy. (B) side projection from confocal microscopy. (C) printing process on substrate fixed using heated vacuum bed. The microscopy image was acquired on Andor Dragonfly spinning disk confocal system with high-speed CMOS camera Zyla 4.2 (Andor Technology Ltd., Belfast, UK) mounted on Leica DMi8 inversed fully mechanized microscope (Leica, Wetzlar, Germany) using 20× lens (NA = 0.75) with water immersion. The wavelengths of the excitation lasers were 405 nm and 561 nm and the transmission characteristics of the emission filters were 450/50 nm and 600/50 nm. Used disk pinhole diameter was 40 µm. The hydrogel samples were photographed in PBS buffer in 35 mm Petri dish with #1.5 glass bottom (0.17 mm thickness, Cellvis, Sunnyvale, CA, USA).CC BY · PubMed Central
Figure 6 Porcine stromal cells in 3D printed collagen hydrogel with concentrations 10, 20 and 30 mg/mL substrate coverslip glass, red F-actin, blue cell nuclei. Top row shows maximum intensity projection and bottom row show side projection from confocal microscopy. The microscopy images were acquired on Andor Dragonfly spinning disk confocal system with high-speed CMOS camera Zyla 4.2 (Andor Technology Ltd., Belfast, UK) mounted on Leica DMi8 inversed fully mechanized microscope (Leica, Wetzlar, Germany) using 20× lens (NA = 0.75) with water immersion. The wavelengths of the excitation lasers were 405 nm and 561 nm and the transmission characteristics of the emission filters were 450/50 nm and 600/50 nm. Used disk pinhole diameter was 40 µm. The hydrogel samples were photographed in PBS buffer in 35 mm Petri dish with #1.5 glass bottom (0.17 mm thickness, Cellvis, Sunnyvale, CA, USA).
Figure 6 Porcine stromal cells in 3D printed collagen hydrogel with concentrations 10, 20 and 30 mg/mL substrate coverslip glass, red F-actin, blue cell nuclei. Top row shows maximum intensity projection and bottom row show side projection from confocal microscopy. The microscopy images were acquired on Andor Dragonfly spinning disk confocal system with high-speed CMOS camera Zyla 4.2 (Andor Technology Ltd., Belfast, UK) mounted on Leica DMi8 inversed fully mechanized microscope (Leica, Wetzlar, Germany) using 20× lens (NA = 0.75) with water immersion. The wavelengths of the excitation lasers were 405 nm and 561 nm and the transmission characteristics of the emission filters were 450/50 nm and 600/50 nm. Used disk pinhole diameter was 40 µm. The hydrogel samples were photographed in PBS buffer in 35 mm Petri dish with #1.5 glass bottom (0.17 mm thickness, Cellvis, Sunnyvale, CA, USA).CC BY · PubMed Central
Figure 7 Main additive manufacturing technologies for collagen bioprinting with a description of the main parts of the assemblies.
Figure 7 Main additive manufacturing technologies for collagen bioprinting with a description of the main parts of the assemblies.CC BY · PubMed Central
Figure 8 Modification of amino groups in gelatine/collagen with methacrylic anhydride.
Figure 8 Modification of amino groups in gelatine/collagen with methacrylic anhydride.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 196 references

Research works printed but not linked: 1

  1. Hermanson, G. (2013). Bioconjugate Techniques, Elsevier. [3rd ed.].

Cited by

See all 116

Metadata

Authors
Stepanovska, J., Supova, M., Hanzalek, K., Broz, A., & Matejka, R.
Affiliations
  • Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, Sitna 3105, 272 01 Kladno, Czech Republic
  • Department of Composites and Carbon Materials, Institute of Rock Structure and Mechanics, Czech Academy of Sciences, 182 09 Prague, Czech Republic
  • Czech Technical University in Prague (CZ)
  • Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Videnska 1083, 142 20 Prague, Czech Republic
Venue
Biomedicines
Publisher
MDPI AG
Published
2021-09-01
Volume
9
Issue
9
Pages
1137
ISSN
2227-9059 (ISSN-L)
OpenAlex
W3198590026
Cited by
112
References
196
Citations by year
2026: 24 · 2025: 32 · 2024: 29 · 2023: 18 · 2022: 7 · 2021: 2
FWCI
1.18
Type
journal article
Language
en
Open access
Locations
  • Biomedicines (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, other-oa)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Ministerstvo Zdravotnictví Ceské Republiky (NV19-02-00068)
  • České Vysoké Učení Technické v Praze (SGS20/201/OHK4/3T/17)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
  • Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
Keywords
collagen gel, 3D bioprinting, physically crosslinked hydrogels, cell viability, laser-assisted bioprinting, cell scaffolds, hydrogel stiffness, extracellular matrix

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics. https://app.cochat.ai/papers/10.3390/biomedicines9091137
The paper
Stepanovska, J., Supova, M., Hanzalek, K., Broz, A., & Matejka, R. (2021). Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics. Biomedicines. https://doi.org/10.3390/biomedicines9091137

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.