Synchrotron Radiation Pair Distribution Function Analysis of Gels in Cements
Open accessThe DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Abstract
The analysis of atomic ordering in a nanocrystalline phase with small particle sizes, below 5 nm, is intrinsically complicated because of the lack of long-range order. Furthermore, the presence of additional crystalline phase(s) may exacerbate the problem, as is the case in cement pastes. Here, we use the synchrotron pair distribution function (PDF) chiefly to characterize the local atomic order of the nanocrystalline phases, gels, in cement pastes. We have used a multi r-range analysis approach, where the ~4–7 nm r-range allows determining the crystalline phase contents; the ~1–2.5 nm r-range is used to characterize the atomic ordering in the nanocrystalline component; and the ~0.2–1.0 nm r-range gives insights about additional amorphous components. Specifically, we have prepared four alite pastes with variable water contents, and the analyses showed that a defective tobermorite, Ca11Si9O28(OH)2.8.5H2O, gave the best fit. Furthermore, the PDF analyses suggest that the calcium silicate hydrate gel is composed of this tobermorite and amorphous calcium hydroxide. Finally, this approach has been used to study alternative cements. The hydration of monocalcium aluminate and ye’elimite pastes yield aluminum hydroxide gels. PDF analyses show that these gels are constituted of nanocrystalline gibbsite, and the particle size can be as small as 2.5 nm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has been confirmed that the hydration of ye'elimite and anhydrite yields ettringite as the unique crystalline phase and nanocrystalline gibbsite in agreement with previous publications [27,29].”
From X-ray Total Scattering Study of Phases Formed from Cement Phases Carbonation (2021) · cites this paper as [27]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1997) · Emerald Group Publishing Limited eBooks · doi:10.1680/cc.25929 · Cited by 3,151
PDFfit2 and PDFgui: computer programs for studying nanostructure in crystals
Farrow, C. L., Juhas, P., Liu, J. W., Bryndin, D., Božin, E. S., Bloch, J., Proffen, T., & Billinge, S. J. L. (2007) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/19/33/335219 · Cited by 1,886 · cited 1×
“Structural and quantitative phase analysis information was obtained from the PDF data using the PDFgui software [46].”
MethodJuhás, P., Davis, T., Farrow, C. L., & Billinge, S. J. L. (2013) · Journal of Applied Crystallography · doi:10.1107/s0021889813005190 · Cited by 1,341 · cited 1×
“PDF experimental data were obtained using PDFgetX3 [45] with a Qmax = 21 Å−1.”
MethodAdvances in understanding hydration of Portland cement
Scrivener, K. L., Juilland, P., & Monteiro, P. J. M. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.025 · Cited by 1,319 · cited 1×
“The reaction kinetics of alite and tricalcium aluminate are quite fast; comparatively, the kinetics of belite and ferrite hydration reactions are much slower [2,3].”
BackgroundComposition and density of nanoscale calcium–silicate–hydrate in cement
Allen, A. J., Thomas, J. J., & Jennings, H. M. (2007) · Nature Materials · doi:10.1038/nmat1871 · Cited by 1,089 · cited 1×
“9 [2,6,7]; meanwhile, the Ca/Si ratio of this clinotobermorite is 1.”
BackgroundRefinements to colloid model of C-S-H in cement: CM-II
Jennings, H. M. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.10.006 · Cited by 1,049 · cited 1×
“This pore water [39] should not be confused with capillary (free water), which is removed when arresting the hydration reaction(s).”
BackgroundComparison of methods for arresting hydration of cement
Zhang, J., & Scherer, G. W. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.003 · Cited by 793 · cited 2×
“We speculate that the minor loss observed close to 660 °C comes from the decarbonation of amorphous calcite, and it could also be due to remnant organic solvent absorbed in the C-S-H gel [37].”
BackgroundBillinge, S. J. L., & Kanatzidis, M. G. (2004) · Chemical Communications · doi:10.1039/b309577k · Cited by 523
Densification of C–S–H Measured by 1H NMR Relaxometry
Muller, A. C. A., Scrivener, K. L., Gajewicz, A. M., & McDonald, P. J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp3102964 · Cited by 515
Model structures for C-(A)-S-H(I)
Richardson, I. G. (2014) · Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials · doi:10.1107/s2052520614021982 · Cited by 450 · cited 12×
“Although some crystal structures for tobermorite led to relatively similar RW values, see Table 1, the defective structure clinotobermorite T3_14sc [9] was selected due to the lowest RW value, and also because it matched properly the peak at 15.”
BackgroundInfluentialThe new Material Science Powder Diffraction beamline at ALBA Synchrotron
Fauth, F., Peral, I., Popescu, C., & Knapp, M. (2013) · Powder Diffraction · doi:10.1017/s0885715613000900 · Cited by 402
Rietveld quantitative amorphous content analysis
De La Torre, A. G., Bruque, S., & Aranda, M. A. G. (2001) · Journal of Applied Crystallography · doi:10.1107/s0021889801002485 · Cited by 397 · cited 1×
“The non-crystalline content of the samples was determined by internal standard methodology [44] from LXRPD data.”
MethodSelf-citationChen, J. J., Sorelli, L., Vandamme, M., Ulm, F., & Chanvillard, G. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03599.x · Cited by 369 · cited 2×
“9 [2,6,7]; meanwhile, the Ca/Si ratio of this clinotobermorite is 1.”
BackgroundResearch review of cement clinker chemistry
Ludwig, H.-M., & Zhang, W. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.018 · Cited by 339 · cited 1×
“Portland cement (PC) is considered the most manufactured product in the world, as it is the main component of the construction industry [1].”
BackgroundPacheco-Torgal, F., Jalali, S., Labrincha, J., & John, V. M. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857098993 · Cited by 297
Nanostructure of Calcium Silicate Hydrates in Cements
Skinner, L. B., Chae, S. R., Benmore, C. J., Wenk, H. R., & Monteiro, P. J. M. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.195502 · Cited by 284 · cited 1×
“These investigations have revealed that the C-S-H gel from alite hydration presents a nanocrystalline nature with atomic ordering up to approximately 40 Å [29,31].”
BackgroundDe La Torre, Á. G., Bruque, S., Campo, J., & Aranda, M. A. G. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00796-2 · Cited by 227 · cited 1×
“The Rietveld analyses were carried out using the crystal structures reported for alite [35]”
MethodSelf-citationUnderstanding silicate hydration from quantitative analyses of hydrating tricalcium silicates
Pustovgar, E., Sangodkar, R. P., Andreev, A. S., Palacios, M., Chmelka, B. F., Flatt, R. J., & d’Espinose de Lacaillerie, J.-B. (2016) · Nature Communications · doi:10.1038/ncomms10952 · Cited by 227
Hydration studies of calcium sulfoaluminate cements blended with fly ash
García-Maté, M., De la Torre, A. G., León-Reina, L., Aranda, M. A. G., & Santacruz, I. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.07.010 · Cited by 218 · cited 1×
“5 μm on a Teflon support), and washed twice with isopropanol, and finally with ether [41].”
MethodSelf-citationA new model for the C-S-H phase formed during the hydration of Portland cements
Gartner, E., Maruyama, I., & Chen, J. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.03.001 · Cited by 217 · cited 1×
“An updated mechanism of growth of the C-S-H gel, and consequently, the evolution and nature of the gel water, have been very recently proposed [17].”
BackgroundLattice dynamics and correlated atomic motion from the atomic pair distribution function
Jeong, I.-K., Heffner, R. H., Graf, M. J., & Billinge, S. J. L. (2003) · Physical Review B · doi:10.1103/physrevb.67.104301 · Cited by 185 · cited 1×
“Moreover, only for the low-r region fits, the delta2 parameter (low-r correlated motion peak sharpening factor) [47,48] was refined.”
BackgroundA comprehensive review of the models on the nanostructure of calcium silicate hydrates
Papatzani, S., Paine, K., & Calabria-Holley, J. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.029 · Cited by 183
Rietveld Quantitative Phase Analysis of OPC Clinkers, Cements and Hydration Products
Aranda*, M. A. G., De la Torre, A. G., & Leon-Reina, L. (2012) · Reviews in Mineralogy and Geochemistry · doi:10.2138/rmg.2012.74.5 · Cited by 170 · cited 1×
“of a calcium silicate hydrate, C-S-H gel in cement nomenclature, and the crystallization of portlandite, c-Ca(OH)2, which can be followed by powder diffraction [4].”
BackgroundSelf-citationStructure, Atomistic Simulations, and Phase Transition of Stoichiometric Yeelimite
Cuesta, A., De la Torre, A. G., Losilla, E. R., Peterson, V. K., Rejmak, P., Ayuela, A., Frontera, C., & Aranda, M. A. G. (2013) · Chemistry of Materials · doi:10.1021/cm400129z · Cited by 150 · cited 1×
“(c) Ye’elimite was synthetized as previously reported [40].”
MethodSelf-citationMeasuring Correlated Atomic Motion Using X-ray Diffraction
Jeong, I.-K., Proffen, T., Mohiuddin-Jacobs, F., & Billinge, S. J. L. (1999) · The Journal of Physical Chemistry A · doi:10.1021/jp9836978 · Cited by 147 · cited 1×
“Moreover, only for the low-r region fits, the delta2 parameter (low-r correlated motion peak sharpening factor) [47,48] was refined.”
BackgroundHydration mechanisms of two polymorphs of synthetic ye'elimite
Cuesta, A., Álvarez-Pinazo, G., Sanfélix, S. G., Peral, I., Aranda, M. Á. G., & la Torre, Á. G. D. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.05.010 · Cited by 145 · cited 2×
“As it has been previously reported [20,38], this type of paste contains a crystalline phase, ettringite, and also an amorphous/nanocrystalline gel of aluminum hydroxide.”
BackgroundSelf-citationMeral, C., Benmore, C. J., & Monteiro, P. J. M. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.027 · Cited by 131 · cited 1×
“In order to shed light and open questions in the chemistry and local atomic structure of C-S-H gels, neutron and synchrotron total scattering data analyzed by PDF methodology have been used, and these studies have been reviewed [25,26].”
MethodRelationships between Composition and Density of Tobermorite, Jennite, and Nanoscale CaO−SiO2−H2O
Thomas, J. J., Jennings, H. M., & Allen, A. J. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp910733x · Cited by 130
Calcium Aluminate Cements - Raw Materials, Differences, Hydration and Properties
Pöllmann, H. (2012) · Reviews in Mineralogy and Geochemistry · doi:10.2138/rmg.2012.74.1 · Cited by 115 · cited 2×
“Calcium aluminate cements (CAC) [18] are another kind of cements that is currently used for several special applications.”
BackgroundThomas, J. J., Chen, J. J., Jennings, H. M., & Neumann, D. A. (2003) · Chemistry of Materials · doi:10.1021/cm034227f · Cited by 114 · cited 1×
“One way to reconcile all of the observations is to suppose that the microstructure of the C-S-H gel, arising from the hydration of alite, is a fine intermixing of tobermorite with amorphous Ca(OH)2 plus the water in the small and large gel pores [6,13,16].”
BackgroundStructural prereactional transformations in Ca(OH)2
Chaix‐Pluchery, O., Pannetier, J., Bouillot, J., & Niepce, J. C. (1987) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(87)90358-6 · Cited by 114
Compositional Evolution of Calcium Silicate Hydrate ( C–S–H ) Structures by Total X ‐Ray Scattering
Soyer‐Uzun, S., Chae, S. R., Benmore, C. J., Wenk, H., & Monteiro, P. J. M. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04989.x · Cited by 108
Morandeau, A. E., & White, C. E. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00348b · Cited by 107
Grangeon, S., Fernandez-Martinez, A., Baronnet, A., Marty, N., Poulain, A., Elkaïm, E., Roosz, C., Gaboreau, S., Henocq, P., & Claret, F. (2017) · Journal of Applied Crystallography · doi:10.1107/s1600576716017404 · Cited by 103 · cited 4×
“This unfitted contribution, highlighted in the difference curve, is consistent with the theoretical PDF signal of an isolated single layer of Ca(OH)2 arranged as in portlandite, as very recently suggested [13].”
BackgroundMethodResultInfluentialQuantum Mechanical Metric for Internal Cohesion in Cement Crystals
Dharmawardhana, C. C., Misra, A. K., & Ching, W. Y. (2014) · Scientific Reports · doi:10.1038/srep07332 · Cited by 93
White, C. E., Daemen, L. L., Hartl, M. A., & Page, K. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.08.006 · Cited by 91 · cited 2×
“These investigations have revealed that the C-S-H gel from alite hydration presents a nanocrystalline nature with atomic ordering up to approximately 40 Å [29,31].”
BackgroundMechanically activated alite: New insights into alite hydration
Bergold, S. T., Goetz‐Neunhoeffer, F., & Neubauer, J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.06.005 · Cited by 74 · cited 1×
“Since the alite hydration kinetics depends upon the average particle size [33,34], the particle size distribution for Ca3SiO5 was measured (dv,50 = 13.”
MethodAtomic pair distribution function analysis of materials containing crystalline and amorphous phases
Proffen, T. E., Page, K. L., McLain, S. E., Clausen, B., Darling, T. W., TenCate, J. A., Lee, S.-Y., & Üstündag, E. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.2005.220.12.1002 · Cited by 71
Masoero, E., Thomas, J. J., & Jennings, H. M. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12713 · Cited by 68 · cited 1×
“Since the alite hydration kinetics depends upon the average particle size [33,34], the particle size distribution for Ca3SiO5 was measured (dv,50 = 13.”
MethodAranda, M. A. G. (2016) · Crystallography Reviews · doi:10.1080/0889311x.2015.1070260 · Cited by 63 · cited 1×
“In order to shed light and open questions in the chemistry and local atomic structure of C-S-H gels, neutron and synchrotron total scattering data analyzed by PDF methodology have been used, and these studies have been reviewed [25,26].”
MethodSelf-citationCuesta, A., Ichikawa, R. U., Londoño-Zuluaga, D., la Torre, Á. G. D., Santacruz, I., Turrillas, X., & Aranda, M. Á. G. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.025 · Cited by 61 · cited 5×
“(b) Calcium aluminate, CaAl2O4, was prepared as previously reported [32].”
BackgroundMethodResultInfluentialSelf-citationRoadmap across the mesoscale for durable and sustainable cement paste – A bioinspired approach
Palkovic, S. D., Brommer, D. B., Kupwade‐Patil, K., Mašić, A., Buehler, M. J., & Büyüköztürk, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.020 · Cited by 56
Cuesta, A., De la Torre, A. G., Santacruz, I., Trtik, P., da Silva, J. C., Diaz, A., Holler, M., & Aranda, M. A. G. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b10048 · Cited by 55 · cited 2×
“These values are in agreement with previously reported data for a similar sample [38].”
BackgroundResultSelf-citation1. Calcium Alumínate Cements - Raw Materials, Differences, Hydration and Properties
Pöllmann, H. (2012) · De Gruyter eBooks · doi:10.1515/9781501508356-003 · Cited by 43
White, C. E. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.09.001 · Cited by 35
Davis, T. D., Johnson, M. N. R., & Billinge, S. J. L. (2013) · Crystal Growth & Design · doi:10.1021/cg400179p · Cited by 34 · cited 1×
“For this reason, the use of short wavelength X-rays and high 2θ diffracting angles is very important [24].”
Background29Si Chemical Shift Anisotropies in Hydrated Calcium Silicates: A Computational Study
Rejmak, P., Dolado, J. S., Stott, M. J., & Ayuela, A. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp308787z · Cited by 15
Research works printed but not linked: 1
- Egami, T., and Billinge, S.J.L. (2012). Underneath the Bragg-Peaks: Structural Analysis of Complex Materials, Elsevier. [2nd ed.].
Cited by
Multiscale understanding of tricalcium silicate hydration reactions
Cuesta, A., Zea-Garcia, J. D., Londono-Zuluaga, D., De la Torre, A. G., Santacruz, I., Vallcorba, O., Dapiaggi, M., Sanfélix, S. G., & Aranda, M. A. G. (2018) · Scientific Reports · doi:10.1038/s41598-018-26943-y · Cited by 165
Self-citationFurther insights into calcium sulfoaluminate cement expansion
Hargis, C. W., Lothenbach, B., Müller, C. J., & Winnefeld, F. (2018) · Advances in Cement Research · doi:10.1680/jadcr.18.00124 · Cited by 75
“The water content of AH3 and its resulting molar volume were not varied in this study because of uncertainty about the amount of bound water and the timing of the change in bound water over time (Cuesta et al., 2017a, Jansen et al., 2017).”
BackgroundHou, D., Zhao, C., Paterson, A. R., Li, S., & Jones, J. L. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.12.003 · Cited by 62
Jansen, D. C., Wolf, J. J., & Fobbe, N. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105923 · Cited by 53
Zhang, Y., Zhao, Q., Gao, Z., & Chang, J. S. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106607 · Cited by 53
Metadata
- Authors
- Cuesta, A., Zea-Garcia, J. D., Londono-Zuluaga, D., De la Torre, A. G., Santacruz, I., Vallcorba, O., & Aranda, M.
- Affiliations
- ALBA Synchrotron (Spain) (ES)
- Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain
- Universidad de Málaga (ES)
- Corresponding author
- Aranda, Miguel
- ORCID
- Venue
- Crystals
- Publisher
- MDPI AG
- Published
- 2017-10-18
- Volume
- 7
- Issue
- 10
- Pages
- 317
- ISSN
- 2073-4352 (ISSN-L)
- OpenAlex
- W2766314201
- Cited by
- 24
- References
- 47
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 1 · 2023: 2 · 2022: 3 · 2021: 2 · 2020: 1 · 2019: 4 · 2018: 6 · 2017: 1
- FWCI
- 3.43
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Crystals (publishedVersion, cc-by)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Repositorio Institucional de la Universidad de Málaga (University of Málaga) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › X-ray Diffraction in Crystallography
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- pair distribution function, cement paste, calcium silicate hydrate gel, tobermorite, tricalcium silicate, moisture content, monocalcium aluminate, ye'elimite, gibbsite, aluminum hydroxide gel, nanocrystalline phase, local atomic structure, alternative cement, cement hydration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.