A Review of Early Fault Diagnosis Approaches and Their Applications in Rotating Machinery
Open accessThe DOI matches its Crossref record; 176 of the 176 references it cites were found in a registry or an index.
Abstract
Rotating machinery is widely applied in various types of industrial applications. As a promising field for reliability of modern industrial systems, early fault diagnosis (EFD) techniques have attracted increasing attention from both academia and industry. EFD is critical to provide appropriate information for taking necessary maintenance actions and thereby prevent severe failures and reduce financial losses. A massive amounts of research work has been conducted in last two decades to develop EFD techniques. This paper reviews and summarizes the research works on EFD of gears, rotors, and bearings. The main purpose of this paper is to serve as a guidemap for researchers in the field of early fault diagnosis. After a brief introduction of early fault diagnosis techniques, the applications of EFD of rotating machine are reviewed in two aspects: fault frequency-based methods and artificial intelligence-based methods. Finally, a summary and some new research prospects are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [93]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 2×
“EMD, proposed by Huang et al [34], can adaptively decompose a complicated multi-component signal into a series of intrinsic mode functions (IMFs), whose instantaneous frequencies have physical meaning.”
BackgroundNearest neighbor pattern classification
Cover, T., & Hart, P. (1967) · IEEE Transactions on Information Theory · doi:10.1109/tit.1967.1053964 · Cited by 16,936 · cited 1×
“In KNN classification methods, each training sample is described as an S-dimensional space according to the value of each of its S features [53].”
MethodVariational Mode Decomposition
Dragomiretskiy, K., & Zosso, D. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2288675 · Cited by 9,184 · cited 3×
“(EEMD), and local mean decomposition (LMD), empirical wavelet transform (EWT) [32], and variational mode decomposition (VMD) [33].”
BackgroundMethodENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD
WU, Z., & HUANG, N. E. (2009) · Advances in Adaptive Data Analysis · doi:10.1142/s1793536909000047 · Cited by 8,715 · cited 3×
“EEMD, proposed by Huang, is inspired by the dyadic filter bank nature of the EMD when applied to white noise [38].”
BackgroundMethodInfluentialThe wavelet transform, time-frequency localization and signal analysis
Daubechies, I. (1990) · IEEE Transactions on Information Theory · doi:10.1109/18.57199 · Cited by 6,483
The Nature of Statistical Learning Theory
Sain, S. R. (1996) · Technometrics · doi:10.1080/00401706.1996.10484565 · Cited by 5,434
Entropy-based algorithms for best basis selection
Coifman, R. R., & Wickerhauser, M. V. (1992) · IEEE Transactions on Information Theory · doi:10.1109/18.119732 · Cited by 3,188
Gilles, J. (2013) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2265222 · Cited by 2,210 · cited 2×
“Empirical wavelet transform (EWT) is a novel adaptive decomposition method proposed by Gilles [40] in 2013.”
MethodArtificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188 · cited 1×
“As an emerging field in industrial applications and an effective solution for fault recognition, AI-based early fault diagnosis method has been receiving increasing attention from academia and industry [3].”
BackgroundLogistic regression and Artificial Neural Network Classification models: A methodology review
Dreiseitl, S., & Ohno-Machado, L. (2002) · Journal of Biomedical Informatics · doi:10.1016/s1532-0464(03)00034-0 · Cited by 2,177 · cited 1×
“The weights and threshold value of the network are constantly adjusted by back propagation, and they help make the network error sum of squares minimum [59].”
Background
Research works printed but not linked: 3
- Mallat, S.G. (2008). A wavelet Tour of Signal Processing: The Sparse Way, Elsevier Press. [3rd ed.].
- Fan, 2013, The design of a new sparsogram for fast bearing fault diagnosis: Parts 1 and 2, Mech. Syst. Signal Process., 40, 499
- Fu, 2016, Rolling bearing diagnosing method based on time domain analysis and adaptive fuzzy C-means clustering, Shock Vib., 2016, 9412787
Cited by
Items 101–200 of 234
Improved Synchronous Sampling and Its Application in High-Speed Railway Bearing Damage Detection
Wang, K., Huang, Y., Zhang, B., Luo, H., Yu, X., Chen, D., & Zhang, Z. (2024) · Machines · doi:10.3390/machines12020101 · Cited by 9
Deep Reconstruction Transfer Convolutional Neural Network for Rolling Bearing Fault Diagnosis
Feng, Z., Tong, Q., Jiang, X., Lu, F., Du, X., Xu, J., & Huo, J. (2024) · Sensors · doi:10.3390/s24072079 · Cited by 10
A lightweight algorithm for synchronized multimodal data acquisition using temporal sample alignment
Piątkowski, J., Karbowiak, Ł., & Depta, F. (2025) · Scientific Reports · doi:10.1038/s41598-025-07797-7 · Cited by 14
TD-CLNet: a time-distributed CNN-LSTM network for fault detection in belt conveyor idlers
Alharbi, F., Luo, S., & Yang, G. (2025) · Neural Computing and Applications · doi:10.1007/s00521-025-11570-2 · Cited by 9
“Despite these improvements, the continuous operation of manufacturing equipment brings a persistent risk of mechanical failure, which can disrupt production, cause financial losses, and pose safety hazards [3].”
Gituku, E. W., Kimotho, J. K., & Njiri, J. G. (2020) · Engineering Reports · doi:10.1002/eng2.12307 · Cited by 9
Mezni, Z., Delpha, C., Diallo, D., & Braham, A. (2022) · Entropy · doi:10.3390/e24091251 · Cited by 9
Controlled Symmetry with Woods-Saxon Stochastic Resonance Enabled Weak Fault Detection
Liu, J., Guo, J., Hu, B., Zhai, Q., Tang, C., & Zhang, W. (2023) · Sensors · doi:10.3390/s23115062 · Cited by 9
“Therefore, the development of novel methods that can identify and extract useful signals under the interference of substantial background noise has become an increasingly important topic in the field of weak fault detection [1,2].”
BackgroundWang, B., Wang, L., Zou, B., Xiao, H., Ding, X., & Shao, Y. (2023) · Swarm and Evolutionary Computation · doi:10.1016/j.swevo.2023.101407 · Cited by 9
Lei, N., Huang, F., & Li, C. (2024) · Journal of Vibroengineering · doi:10.21595/jve.2023.23673 · Cited by 10
“The rolling bearing fault vibration signal has a distinctive nonlinear non-stationary characteristics and contains rich and complex noise components, which makes it even difficult to extract its fault features [2].”
BackgroundHuang, X., Li, Y., & Chai, Y. (2021) · Frontiers in Energy Research · doi:10.3389/fenrg.2021.747622 · Cited by 10
Self-citationTowards a health-aware fault tolerant control of complex systems: A vehicle fleet case
Lipiec, B., Mrugalski, M., Witczak, M., & Stetter, R. (2022) · International Journal of Applied Mathematics and Computer Science · doi:10.34768/amcs-2022-0043 · Cited by 11
Zheng, D., Han, B., Liu, G., Li, Y., & Yu, H. (2021) · IEEE Access · doi:10.1109/access.2021.3063743 · Cited by 9
“Entropy can measure the disorder degree of time series, so it can represent the abrupt behavior of system dynamics when rotating machinery fails [10]–[12].”
BackgroundSelf-citationBearing Fault Detection in Induction Motors Using Line Currents
Sunder, M., Abishek, R., Sabarivelan, S., Maiti, M., & Bingi, K. (2021) · ECTI Transactions on Electrical Engineering Electronics and Communications · doi:10.37936/ecti-eec.2021192.244163 · Cited by 11
“• Electrical defects – Stator winding faults – Rotor faults • Mechanical defects – Bearing faults – Dynamic, static,t and mixed eccentricities – Gear faults The continuous replacement and preventive maintenance of bearings are essential factors in the smooth operation of induction motors [11, 12].”
BackgroundJia, G., Meng, Y., & Qin, Z. (2024) · Structural durability & health monitoring · doi:10.32604/sdhm.2024.049298 · Cited by 8
Duda, A., & Sułowicz, M. (2020) · Energies · doi:10.3390/en13143544 · Cited by 8
“The state‐of‐the‐art early fault detection and its application for rotating machines is described in [54].”
BackgroundFault feature extraction of rolling element bearings based on short-time processing
Chen, F. (2022) · Journal of Vibroengineering · doi:10.21595/jve.2021.22198 · Cited by 8
“Accordingly, monitoring and fault diagnosis of bearings is of significant importance in the field of fault diagnosis of the rotary machinery [1-4].”
BackgroundSha, Y., Gou, S., Faber, J., Liu, B., Li, W., Schramm, S., Stöcker, H., Steckenreiter, T., Vnucec, D., Wetzstein, N., et al. (2022) · ACM SIGKDD Conference on Knowledge Discovery and Data Mining (KDD) · doi:10.1145/3534678.3539133 · Cited by 19
“Conventionally, for anomaly detection in industry, engineering experts manually establish static thresholds for abnormal status based on physical definitions of cavitation [6] or mechanical structure of the target machine [28].”
BackgroundBera, B., Lin, C., Huang, S., Liang, J.-W., & Lin, P. T. (2023) · Electronics · doi:10.3390/electronics12020312 · Cited by 8
Wang, Y., Jia, L., Pan, H., Zhao, H., Xiao, J., & Ding, X. (2025) · Applied Acoustics · doi:10.1016/j.apacoust.2025.110532 · Cited by 7
Artificial Intelligence in Fault Diagnosis of Industrial Machinery: A Comprehensive Review
Feisa, T. T., Gebremedhen, H. S., Kibrete, F., Woldemichael, D. E., & Enyew, G. G. (2025) · Structural Control and Health Monitoring · doi:10.1155/stc/4640227 · Cited by 10
Fault diagnosis of rotating machinery via multi-structure fusion discriminative projection
Su, S., Zhang, Z., Zhu, Y., & Hou, Y. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acdaeb · Cited by 7
“One of the key components of industrial equipment, rotating machinery is widely utilized in production equipment for the industrial sector [1].”
Liu, J., Tang, C., Hu, B., Guo, J., Qiao, Z., & Liao, Z. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad6fc1 · Cited by 7
“Rotating machinery such as bearings and gears are one of the main types of mechanical equipment, and rolling bearings are also one of the main forms of transmission support, with a wide range of applications [2].”
Bearing Fault Diagnosis Method Based on Improved Singular Value Decomposition Package
Zhu, H., He, Z., Xiao, Y., Wang, J., & Zhou, H. (2023) · Sensors · doi:10.3390/s23073759 · Cited by 7
Nonconvex regularized sparse representation in a tight frame for gear fault diagnosis
Huang, W., Zhang, C., Wu, S., Shi, J., Du, G., & Zhu, Z. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac6414 · Cited by 7
“In recent years, the vibration theory of gears has been thoroughly studied by many scholars at home and abroad from different angles [1].”
Self-citationDu, S., Zhang, C., & Luo, Z. (2024) · Science China Technological Sciences · doi:10.1007/s11431-024-2719-y · Cited by 6
“The development of industry is closely related to rotating machinery, and bearing is the most important part of rotating machinery [1,2].”
A Comparative Study of Rolling Bearing Fault Classification Using CWT-CNN and STFT-CNN Methods
Joseph, T., Krishnan, K. K., & Sudeep, U. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-9264-5_11 · Cited by 7
Du, Y.-Z., Cao, Y., Wang, H., & Li, G. (2024) · Lubricants · doi:10.3390/lubricants12120452 · Cited by 8
“At present, the fault diagnosis methods of rolling bearings based on vibration signal are mainly divided into two categories: fault diagnosis method based on signal processing and fault diagnosis method based on deep learning [7–9].”
Incipient Stator Winding Turn Faults Detection in Induction Motor
Al-Muhaza, M., Al-Shmary, A., Al-Enazi, S., Refaat, S. S., & Abu‐Rub, H. (2021) · IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) · doi:10.1109/ceidp50766.2021.9705351 · Cited by 6
Study of Multiplicative Load on the Misaligned Rotor-AMB System
Gautam, A. K., & Tiwari, R. (2023) · Mechanisms and machine science · doi:10.1007/978-3-031-40455-9_37 · Cited by 6
Fault Diagnosis in Industries: How to Improve the Health Assessment of Rotating Machinery
Calabrese, F., Regattieri, A., Bortolini, M., & Galizia, F. G. (2021) · Smart innovation, systems and technologies · doi:10.1007/978-981-16-6128-0_25 · Cited by 6
Li, H., Peng, W., Adumene, S., & Yazdi, M. (2023) · Studies in systems, decision and control · doi:10.1007/978-3-031-29962-9_4 · Cited by 6
Fault Diagnosis of Journal Bearings Using Vibration Analysis and Machine Learning Techniques
Jebur, N. A., & Soud, W. A. (2025) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-025-02157-z · Cited by 5
“Wei et al. studied rotating machinery Early Fault Detection (EFD) methods and their usefulness in modern industrial system reliability [8].”
Qian, B., Cai, Y., Ran, Y., & Sun, W. (2024) · Scientific Reports · doi:10.1038/s41598-024-61180-6 · Cited by 5
Enabling accurate detection and localization of bearing faults under noise and vibration
Zhāng, W., Lu, H. X., Wang, Y., Wang, Y., Li, Z., Yang, M., & Cui, Y. (2025) · Applied Acoustics · doi:10.1016/j.apacoust.2024.110528 · Cited by 5
A Deep Residual Convolutional Neural Network based Bearing Fault Diagnosis with Multi-Sensor Data
Niu, G., Liu, E., Zhang, B., Golda, E. M., & Mastro, S. A. (2021) · IEEE International Conference on Industrial Cyber-Physical Systems (ICPS) · doi:10.1109/icps49255.2021.9468130 · Cited by 5
“Bearing diagnosis mainly focuses on signal-processing based approach, data driven based approach, and some combined approach [1]–[3].”
MethodComparison of Machine Learning Algorithms for Bearing Failures Classification and Prediction
Aldeoes, Y. N., Ghockle, P., & Sondkar, S. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-19-1111-8_22 · Cited by 5
Belkacemi, B., & Saad, S. (2021) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-73689-7_92 · Cited by 5
“The overall flow of wavelet decomposition process is conducted in many steps, firstly the raw vibration signal is decomposed into several levels of frequency bands, then the approximate and detail coefficients in each level with standard deviation values for approximate and detail coefficients are found, finally, a co…”
BackgroundSilva, A., González-Guillén, C. E., Ruiz-García, M., & Domínguez-Jiménez, M. E. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.108900 · Cited by 5
Hybrid Fault Diagnosis Method based on Wavelet Packet Energy Spectrum and SSA-SVM
Qu, J., Ma, B., Ma, X., & Wang, M. (2022) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2022.0130508 · Cited by 5
Feature Extraction of Weak Fault for Rolling Bearing Based on Improved Singular Value Decomposition
Lingli, C., Yinhang, L., & Wang, X. (2022) · Journal of Mechanical Engineering · doi:10.3901/jme.2022.17.156 · Cited by 5
Fault diagnosis of press dies using dynamic mode decomposition of a sound signal
Kato, Y., & KUMAGAI, R. (2023) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.2023jamdsm0040 · Cited by 5
Denoised Improved Envelope Spectrum for Fault Diagnosis of Aero-Engine Inter-Shaft Bearing
Li, D., Chen, L., Zhou, H., Tang, J., Zhao, X., & Xie, J. (2025) · Applied Sciences · doi:10.3390/app15158270 · Cited by 4
Gear Pitting Fault Detection: Leveraging Anomaly Detection Methods
Alper, O. C., Doğan, H., & Öztürk, H. (2023) · National Conference on Electrical and Electronics Engineering (ELECO) · doi:10.1109/eleco60389.2023.10416063 · Cited by 5
“For the purpose of detecting anomalies and potential issues within gear systems, a diverse array of signals and data sources are employed, with vibration signals being the most popular among them [2, 3, 4, 5].”
BackgroundMulti-Metric Fusion Hypergraph Neural Network for Rotating Machinery Fault Diagnosis
Zhu, J., Hu, J., & Sheng, B. (2025) · Actuators · doi:10.3390/act14050242 · Cited by 4
Imam, S. A., Lim, M. H., Abdelrhman, A. M., Ahmad, I., & Leong, M. S. (2025) · Engineering Reports · doi:10.1002/eng2.70202 · Cited by 6
Wißbrock, P., Pelkmann, D., & Tölle, B. (2021) · PHM Society European Conference · doi:10.36001/phme.2021.v6i1.2803 · Cited by 4
Wheel-Rail Contact-Induced Impact Vibration Analysis for Switch Rails Based on the VMD-SS Method
Hu, P., Wang, H., Zhang, C., Hua, L., & Tian, G. Y. (2022) · Sensors · doi:10.3390/s22186872 · Cited by 4
“However, when using EMD, EEMD and LMD for non-stationary impact vibration processing, there still exist problems of modal aliasing, the end effect and the inability to separate components with similar center frequencies [23].”
MethodBearing Element Fault Diagnosis Using Support Vector Machine
Almatheel, Y. A., & Osman, M. (2021) · International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE) · doi:10.1109/iccceee49695.2021.9429590 · Cited by 4
Kinematic Frequencies of Rotating Equipment Identified with Sparse Coding and Dictionary Learning
Martin-del-Campo, S., Sandin, F., & Schnabel, S. (2019) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2019.v11i1.837 · Cited by 4
“The number of works that consider machine learning methods to enable early fault diagnosis in rotating machinery is increasing, see Wei et al. (2019) for a recent review.”
BackgroundSreevalsan‐Nair, J. (2021) · Encyclopedia of earth sciences series/Encyclopedia of earth sciences · doi:10.1007/978-3-030-26050-7_206-1 · Cited by 4
ACMSlE: A Novel Framework for Rolling Bearing Fault Diagnosis
Wu, S., Zhang, W., Qian, J., Yu, Z., Li, W., & Zheng, L. (2025) · Processes · doi:10.3390/pr13041167 · Cited by 3
Zhu, H., Wang, L., & Zhao, X. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3626533 · Cited by 3
“This underscores the crucial significance of fault diagnosis technology within the realm of industrial manufacturing [3].”
Voltolini, E., Toscani, A., Armelloni, E., Cocconcelli, M., Fendillo, L., & Manconi, E. (2026) · Applied Sciences · doi:10.3390/app16083670 · Cited by 3
Liu, X., & Shu, L. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00679-6 · Cited by 3
Martin-del-Campo, S., Sandin, F., & Schnabel, S. (2021) · Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability · doi:10.1177/1748006x20984260 · Cited by 3
“Current performance requirements demand methods that go beyond fault detection to include identification of abnormal operational conditions as early as possible.(1,2) Early fault detection is important in a wide range of industries in the development of their maintenance strategies and it can prove critical in industr…”
BackgroundDai, H., & Wang, Y. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1820/1/012114 · Cited by 3
Study of diagnosis for rotating machinery in advanced nuclear reactor based on deep learning model
Sun, Y., & Wang, H. (2023) · Frontiers in Energy Research · doi:10.3389/fenrg.2023.1210703 · Cited by 3
Explainable artificial intelligence approaches for fault diagnosis in rotating machinery
Brito, L. C. (2022) · doi:10.14393/ufu.te.2022.557 · Cited by 4
Sreevalsan‐Nair, J. (2023) · Encyclopedia of earth sciences series/Encyclopedia of earth sciences · doi:10.1007/978-3-030-85040-1_206 · Cited by 3
Ensemble machine learning for intelligent condition monitoring
Jenab, K., Ward, T. B., Isaza, C., Ortega-Moody, J., & Rivera, E. K. A. (2024) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-024-02414-8 · Cited by 2
Silva, A., Zarzo, A., Olivares, J. L., & Muñoz-Guijosa, J. M. (2024) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2024.118753 · Cited by 2
Yan, L., Hu, S., Miao, Y., Zhou, Q., & Chen, C. (2025) · Journal of Vibration and Control · doi:10.1177/10775463251350414 · Cited by 2
“Wheel bearings play a vital role in running parts of loco-motive (Wei et al., 2019).”
Quan, D., Niu, Y., Zhao, Z., He, C., Yang, X., Li, M., Wang, T., Zhang, L., Ma, L., Zhao, Y., et al. (2025) · Aerospace · doi:10.3390/aerospace12070616 · Cited by 2
Degradation Monitoring and RUL Prediction of Rolling Element Bearing Using Proposed C-MMPE Feature
Sahu, P. K., & Nandan, R. (2022) · International Conference on Power Science and Engineering (ICPSE) · doi:10.1109/icpse56329.2022.9935431 · Cited by 2
“In modern industries, bearings are running continuously and are often prone to different kinds of faults leading to catastrophic failure of the whole system [4].”
BackgroundActive Fault Isolation for Multimode Fault Systems Based on a Set Separation Indicator
Han, K., Lu, S., Liu, Z., & Wang, Z. (2023) · Entropy · doi:10.3390/e25060876 · Cited by 2
Zhu, G., Liu, X., & Huang, Q. (2025) · Engineering Research Express · doi:10.1088/2631-8695/ae1b66 · Cited by 2
Diagnosis of Rotor Component Shedding in Rotating Machinery: A Data-Driven Approach
Zhang, S., Lin, Q., & Lin, J. (2024) · Sensors · doi:10.3390/s24134123 · Cited by 2
Sharma, P., Amhia, H., & Sharma, S. D. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2070/1/012141 · Cited by 2
“And AI technique based methods are being popular for the diagnosis of RBFs [4].”
MethodA Brief Study on a Novel Approach for the Gearbox Fault DiagnosisPreprint
Mukherjee, S., Kumar, V., & Sarangi, S. (2021) · Preprints.org · doi:10.20944/preprints202106.0633.v1 · Cited by 2
“The gearbox’s failure occurs mainly due to an internal fault related to the gear tooth’s deterioration or damage [1], [2].”
BackgroundInfluentialA Kalman Filtering Method on Time–Frequency Discrimination Analysis
Li, Y., & Xiao, F. (2024) · Circuits Systems and Signal Processing · doi:10.1007/s00034-024-02903-y · Cited by 1
“There are many time–frequency transform methods to separate the given frequency signals from the hybrid signal, such as the continuous wavelet transform (CWT) method, the Wigner-Ville distribution (WVD) method, and the short-time Fourier transform (STFT) method [5, 7, 16, 19, 27].”
Self-citationModeling and Validation of Vibration Response of Planetary Gear Systems Considering Meshing Impact
Wang, H., Wang, C., Huang, Y., & Luo, H. (2025) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-025-01887-6 · Cited by 1
“It has attracted widespread research attention [3].”
Kim, S. H., Song, H. M., Jeong, S. H., Lee, W. J., & Kim, S. J. (2025) · Journal of Marine Science and Engineering · doi:10.3390/jmse13071321 · Cited by 1
Yoo, S.-Y., Lee, Y.-N., Lee, J.-C., Hwang, S.-Y., Lee, J., & Lee, S.-S. (2025) · Machines · doi:10.3390/machines13100945 · Cited by 1
“Nevertheless, in industrial settings, the scarcity and imbalance of fault labels, the in-feasibility of intentionally collecting fault data, and domain shift between training and field conditions often cause severe performance degradation [11,12].”
FISCHETTI, E. A. D. S., Cavalcante, C. A. V., Lima, V. H. R., & Li, Y. (2026) · Computers & Industrial Engineering · doi:10.1016/j.cie.2026.111913 · Cited by 1
Self-citationZamorano, M., García, M. J. G., & Castejón, C. (2026) · Machines · doi:10.3390/machines14070779 · Cited by 1
Bearing race fault detection using an optomechanical micro-resonator
Shi, W., Huo, Y., Tang, X., Zhang, J., Hu, H., Li, Y., Li, X., Cao, L., Zhao, Q., Yang, Z., et al. (2024) · Optics Express · doi:10.1364/oe.529334 · Cited by 1
Self-citationCao, M., Fu, Y., Zhu, S., Ling, L., & Li, L. (2024) · Journal of Vibration and Control · doi:10.1177/10775463241283180 · Cited by 1
“Therefore, it is necessary to obtain a reduced-order system that not only retains the key characteristics of the original viscoelastically damped system but also provides practical applicability for the equivalent reduction model (Lu et al., 2019; Poussot-Vassal, 2019; Wei et al., 2019).”
Multi-Fault detection for wind turbines: a vision intelligence powered method
Wu, C., Yang, L., & Zhang, Z. (2026) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2026.101537 · Cited by 3
Huadong, H. A. O., & Yuan, Y. (2026) · Physica Scripta · doi:10.1088/1402-4896/ae5153 · Cited by 1
Fault diagnosis of rope tension in hoisting systems based on vibration signals
Xue, S., Tan, J., & Shi, L. (2020) · Vibroengineering PROCEDIA · doi:10.21595/vp.2019.21239 · Cited by 1
“The Fourier transform (FT), wavelet transform (WT), and empirical mode decomposition (EMD) methods are commonly used in decomposition [3].”
MethodA novel intelligent fault diagnosis method based on variant sparse filtering and back-propagation
Chan, L., & Cheng, C. (2021) · Noise & Vibration Worldwide · doi:10.1177/09574565211055786 · Cited by 1
Underwater Acoustic Intensity Analysis using Noise Assisted-MEMD with Varying Distances
Fajarwati, L., Feriadi, Y., & Widjiati, E. (2023) · Jurnal Teknik Elektro · doi:10.15294/jte.v15i1.43878 · Cited by 1
Satellite Fault Diagnosis Method Based on RBFNN and DS Theory
Wang, Y., Ma, C., Shao, S., Zhang, P., & Wang, H. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-2120-7_52 · Cited by 1
Kim, D. M., Kim, S. H., Song, H. M., & Kim, S. J. (2024) · Journal of Marine Science and Engineering · doi:10.3390/jmse12060917 · Cited by 1
Classification of Rotor Imbalance in Trains Using Airborne Sound With Real-World Data
Kreuzer, M., Schmidt, D. M., Wokusch, S., & Kellermann, W. (2024) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm61352.2024.10626489 · Cited by 1
“The classification is predominantly achieved by analysing structure-borne sound data [1]–[5] and to a lesser extent by analysing airborne sound data [6]–[11].”
BackgroundJin, Y., Chen, P., Rao, M. V. C., Lin, T. R., & Zuo, M. J. (2024) · Mechanisms and machine science · doi:10.1007/978-3-031-69483-7_17 · Cited by 1
Bearing Fault Diagnosis by Aperiodic Resonances
Yang, J., & Sanjuán, M. A. F. (2025) · Springer eBooks · doi:10.1007/978-981-96-6819-9_12 · Cited by 1
Gómez, J. P., Fidel, E., Julio, C., & Villuendas-Rey, Y. (2021) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2021.0120467 · Cited by 1
“Many rotating machine failures are related to bearing faults [1-5].”
BackgroundPerformance Evaluation of BPSO & PCA as Feature Reduction Techniques for Bearing Fault Diagnosis
Faysal, A., Keng, N. W., & Lim, M. H. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-33-4597-3_55 · Cited by 1
Jyothi, R. L., Holla, T., Umesh, N. S., Rao, K. U., & Jayapal, R. (2021) · International Journal of Engineering and Advanced Technology · doi:10.35940/ijeat.a3173.1011121 · Cited by 1
Detection of Rolling-Element Bearing Faults with Different Conditions
Najim, H. S., & Ali, J. K. (2022) · Iraqi International Conference on Communication and Information Technologies (IICCIT) · doi:10.1109/iiccit55816.2022.10010675 · Cited by 1
“Due to the multiple vibration sources in rotating machinery, the vibration signals are surrounded by noise and random patterns; as a result, it is difficult to capture the fault conditions, especially in the early stage of the defect [2].”
BackgroundYu, G., & Li, Y. (2023) · Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University · doi:10.1051/jnwpu/20234120344 · Cited by 1
Self-citationMulti-Fault Diagnosis Using Stacked Sparse Autoencoder Model
Saufi, M. S. R. M., Ahmad, Z. A., Leong, M. S., & Lim, M. H. (2019) · International Conference on Applied Engineering (ICAE) · doi:10.1109/icae47758.2019.9221743
Brecher, C., Neus, S., Christoffers, D., & Eckel, H.-M. (2020) · Forschung im Ingenieurwesen · doi:10.1007/s10010-020-00431-0
Zaman, M. A. Q. (2021) · Pakistan Journal of Educational Research · doi:10.52337/pjer.v4i1.151
Feature Selection Algorithms for Forecasting Technical Condition of Electromechanical Actuator
Сергеевич, В. Г., & Skryabin, A. (2021) · International Conference Management of Large-Scale System Development (MLSD) · doi:10.1109/mlsd52249.2021.9600182
A Review on Vibration Analysis of Rotor Shaft System by Various Fault Diagnosis Techniques
Sagar, B. S., & TJPRC (2020) · International journal of mechanical and production engineering research and development · doi:10.24247/ijmperdjun20201281 · Cited by 1
Fast Clustering for Redundancy Removal In Audio Anomaly Detection
Hong, R., Zhou, Y. M., Shi, S., & Zhang, B. (2022) · International Conference on Cloud Computing and Big Data Analytics (ICCCBDA) · doi:10.1109/icccbda55098.2022.9778857
Parkash, C., Kumar, A., Vashishtha, G., Verma, R. K., & Xiang, J. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4104290
Patra, P., Sarangi, D., Rath, A., & Bagal, D. K. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-1665-8_55
Metadata
- Authors
- Wei, Y., Li, Y., Xu, M., & Huang, W.
- Affiliations
- Harbin Institute of Technology (CN)
- Corresponding author
- Li, Yuqing
- Venue
- Entropy
- Publisher
- MDPI AG
- Published
- 2019-04-17
- Volume
- 21
- Issue
- 4
- Pages
- 409
- ISSN
- 1099-4300 (ISSN-L)
- PMC
- PMC7514898
- OpenAlex
- W2939978363
- Cited by
- 232
- References
- 176
- Citations by year
- 2026: 17 · 2025: 34 · 2024: 34 · 2023: 32 · 2022: 36 · 2021: 48 · 2020: 23 · 2019: 8
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Entropy (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51805434)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- early fault diagnosis, rotating machinery, gears, rotor, bearings, predictive maintenance, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.