Effect of Temperature on the Structural and Physicochemical Properties of Biochar with Apple Tree Branches as Feedstock Material
Open accessThe DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Abstract
The objective of this study was to study the structure and physicochemical properties of biochar derived from apple tree branches (ATBs), whose valorization is crucial for the sustainable development of the apple industry. ATBs were collected from apple orchards located on the Weibei upland of the Loess Plateau and pyrolyzed at 300, 400, 500 and 600 °C (BC300, BC400, BC500 and BC600), respectively. Different analytical techniques were used for the characterization of the different biochars. In particular, proximate and element analyses were performed. Furthermore, the morphological, and textural properties were investigated using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, Boehm titration and nitrogen manometry. In addition, the thermal stability of biochars was also studied by thermogravimetric analysis. The results indicated that the increasing temperature increased the content of fixed carbon (C), the C content and inorganic minerals (K, P, Fe, Zn, Ca, Mg), while the yield, the content of volatile matter (VM), O and H, cation exchange capacity, and the ratios of O/C and H/C decreased. Comparison between the different samples show that highest pH and ash content were observed in BC500. The number of acidic functional groups decreased as a function of pyrolysis temperature, especially for the carboxylic functional groups. In contrast, a reverse trend was found for the basic functional groups. At a higher temperature, the brunauer–emmett–teller (BET) surface area and pore volume are higher mostly due to the increase of the micropore surface area and micropore volume. In addition, the thermal stability of biochars also increased with the increasing temperature. Hence, pyrolysis temperature has a strong effect on biochar properties, and therefore biochars can be produced by changing pyrolysis temperature in order to better meet their applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This trend is similar to what is reported in the literature for MS (Suliman et al., 2016; Zhao et al., 2017) and SG (Zanzi et al., 2002; Cetin et al., 2005; Guerrero et al., 2005).”
From Effect of Pyrolysis Temperature on PhysicoChemical Properties and Acoustic-Based Amination of Biochar for Efficient CO2 Adsorption (2020) · cites this paper as Zhao et al., 2017
In the citing paper
“Beyond this, the main mass losses started at around 310-320 ◦ Cfor R-MS-500 and 350-390 ◦ C for R-MS-600 and R-MS-700, respectively and followed the trend as observed in the literature (Zhao et al., 2017).”
From Effect of Pyrolysis Temperature on PhysicoChemical Properties and Acoustic-Based Amination of Biochar for Efficient CO2 Adsorption (2020) · cites this paper as Zhao et al., 2017
In the citing paper
“This furthermore proves that the lower temperature derived biochars were less thermally stable than the higher temperature derived ones, probably because they were not fully carbonized (Sun et al., 2014; Zhao et al., 2017).”
From Effect of Pyrolysis Temperature on PhysicoChemical Properties and Acoustic-Based Amination of Biochar for Efficient CO2 Adsorption (2020) · cites this paper as Zhao et al., 2017
In the citing paper
“an increase in the pyrolysis temperature decreased the content of VM (by 60.8-14.9%)for biochars obtained from apple tree branches”
From Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects (2020) · cites this paper as Zhao et al. 2017
In the citing paper
“The increase in the ash content resulted from progressive concentration of inorganic constituents and OM combustion residues”
From Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects (2020) · cites this paper as Zhao et al. 2017
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230 · cited 1×
“) at higher temperature resulted in the lower ratios of H/C and O/C, indicating that the surface of biochar was more aromatic and less hydrophilic [41,42].”
BackgroundSome aspects of the surface chemistry of carbon blacks and other carbons
Boehm, H. P. (1994) · Carbon · doi:10.1016/0008-6223(94)90031-0 · Cited by 3,043 · cited 1×
“The amount of acidic and basic functional groups was measured by the Boehm method [31].”
MethodLehmann, J. (2007) · Nature · doi:10.1038/447143a · Cited by 2,477 · cited 1×
“Biochar is a carbon-rich product and its addition to soil has been proposed as an effective method for C sequestration [61].”
MethodApplication of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081 · cited 1×
“In addition, the H/C and O/C ratios also indicated that the structural transformations [36] and surface hydrophilicity of biochar [40], the higher extent of carbonization and loss of functional groups containing O and H (such as hydroxyl, carboxyl, et al.”
BackgroundSelf-citationThe forms of alkalis in the biochar produced from crop residues at different temperatures
Yuan, J.-H., Xu, R.-K., & Zhang, H. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.11.018 · Cited by 2,029 · cited 3×
“97), hence, the minerals, especially for the carbonates formation (such as Ca 3 3) and inorganic alkalis (such as K and Na), were pro ably the main cause of each biochars’ in [28].”
BackgroundMethodInfluentialImpact of pyrolysis temperature and manure source on physicochemical characteristics of biochar
Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., & Ro, K. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.084 · Cited by 1,502 · cited 6×
“Wave Numbers (cm−1) Characteristic Vibrations (Functionality) 3500–3200 O–H stretching (water, hydrogen-bonded hydroxyl) [13] 2935 C–H stretching (aliphatic CHx; 2935-asymmetric) [13] 1600 Aromatic C=C and C=O stretching of conjugated ketones and quinones [52] 1440 C=C stretching (lignin carbohydrate) [29] 1325 O–H be…”
BackgroundMethodInfluentialAhmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357 · cited 3×
“Wave Numbers (cm−1) Characteristic Vibrations (Functionality) 3500–3200 O–H stretching (water, hydrogen-bonded hydroxyl) [13] 2935 C–H stretching (aliphatic CHx; 2935-asymmetric) [13] 1600 Aromatic C=C and C=O stretching of conjugated ketones and quinones [52] 1440 C=C stretching (lignin carbohydrate) [29] 1325 O–H be…”
BackgroundSurface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171 · cited 1×
“This result was in agreement with the findings in previous studies [56,57].”
ResultChen, X., Chen, G., Chen, L., Chen, Y., Lehmann, J., McBride, M. B., & Hay, A. G. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.078 · Cited by 1,016 · cited 1×
“) at higher temperature resulted in the lower ratios of H/C and O/C, indicating that the surface of biochar was more aromatic and less hydrophilic [41,42].”
BackgroundRonsse, F., van Hecke, S., Dickinson, D., & Prins, W. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12018 · Cited by 1,000 · cited 1×
“This might due to the fact that the increasing temperature resulted in the further crack of the volatiles fractions into low molecular weight liquids and gases instead of biochar [33].”
Background
Cited by
Items 601–605 of 605
Farissi, H. E. (2026) · Energies · doi:10.3390/en19215117 · Cited by 1
Naeem, M. M., Liu, W., Naeem, M. A., Zhang, S., & Hu, X. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.142182
Prybora, N., Skrypka, A., Коріненко, Б. В., Kamenskyh, D. S., Baran, M. M., Bondarchuk, O. B., Stoliarchuk, N., & Melnyk, I. (2026) · ChemPlusChem · doi:10.1002/cplu.70277
Tanveer, A., Pradhan, S., Muhammad, H., & McKay, G. (2026) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-026-07487-5
Liu, Z., Jiang, S., Sun, L., Li, Q., Lu, S., Zhou, D., Hou, Z., Yu, J., Xue, J., & Jia, M. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.124629
Metadata
- Authors
- Zhao, S.-X., Ta, N., & Wang, X.-D.
- Affiliations
- Northwest A&F University (CN)
- College of Resources & Environment, Northwest A&F University, 3 Taicheng Road, Yangling 712100, China
- ORCID
- Ta, Na
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2017-08-30
- Volume
- 10
- Issue
- 9
- Pages
- 1293
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2752380498
- Cited by
- 585
- References
- 62
- Citations by year
- 2026: 49 · 2025: 58 · 2024: 95 · 2023: 92 · 2022: 89 · 2021: 89 · 2020: 55 · 2019: 40 · 2018: 15 · 2017: 3
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Key Technology R&D Program of the Ministry of Science and Technology, China (2012BAD14B11)
- Special Fund for Agro-scientific Research in the Public Interest of the Ministry of Agriculture, China (201503116)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Life Sciences › Agricultural and Biological Sciences › Soil Science › Soil Carbon and Nitrogen Dynamics
- Keywords
- biochar, pyrolysis temperature, physicochemical properties, structural properties, functional groups, surface area and porosity, thermal stability, cation exchange capacity, fixed carbon, agricultural waste valorization, Loess Plateau
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.