Effect of Temperature on the Structural and Physicochemical Properties of Biochar with Apple Tree Branches as Feedstock Material
Open accessThe DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Abstract
The objective of this study was to study the structure and physicochemical properties of biochar derived from apple tree branches (ATBs), whose valorization is crucial for the sustainable development of the apple industry. ATBs were collected from apple orchards located on the Weibei upland of the Loess Plateau and pyrolyzed at 300, 400, 500 and 600 °C (BC300, BC400, BC500 and BC600), respectively. Different analytical techniques were used for the characterization of the different biochars. In particular, proximate and element analyses were performed. Furthermore, the morphological, and textural properties were investigated using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, Boehm titration and nitrogen manometry. In addition, the thermal stability of biochars was also studied by thermogravimetric analysis. The results indicated that the increasing temperature increased the content of fixed carbon (C), the C content and inorganic minerals (K, P, Fe, Zn, Ca, Mg), while the yield, the content of volatile matter (VM), O and H, cation exchange capacity, and the ratios of O/C and H/C decreased. Comparison between the different samples show that highest pH and ash content were observed in BC500. The number of acidic functional groups decreased as a function of pyrolysis temperature, especially for the carboxylic functional groups. In contrast, a reverse trend was found for the basic functional groups. At a higher temperature, the brunauer–emmett–teller (BET) surface area and pore volume are higher mostly due to the increase of the micropore surface area and micropore volume. In addition, the thermal stability of biochars also increased with the increasing temperature. Hence, pyrolysis temperature has a strong effect on biochar properties, and therefore biochars can be produced by changing pyrolysis temperature in order to better meet their applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This trend is similar to what is reported in the literature for MS (Suliman et al., 2016; Zhao et al., 2017) and SG (Zanzi et al., 2002; Cetin et al., 2005; Guerrero et al., 2005).”
From Effect of Pyrolysis Temperature on PhysicoChemical Properties and Acoustic-Based Amination of Biochar for Efficient CO2 Adsorption (2020) · cites this paper as Zhao et al., 2017
In the citing paper
“Beyond this, the main mass losses started at around 310-320 ◦ Cfor R-MS-500 and 350-390 ◦ C for R-MS-600 and R-MS-700, respectively and followed the trend as observed in the literature (Zhao et al., 2017).”
From Effect of Pyrolysis Temperature on PhysicoChemical Properties and Acoustic-Based Amination of Biochar for Efficient CO2 Adsorption (2020) · cites this paper as Zhao et al., 2017
In the citing paper
“This furthermore proves that the lower temperature derived biochars were less thermally stable than the higher temperature derived ones, probably because they were not fully carbonized (Sun et al., 2014; Zhao et al., 2017).”
From Effect of Pyrolysis Temperature on PhysicoChemical Properties and Acoustic-Based Amination of Biochar for Efficient CO2 Adsorption (2020) · cites this paper as Zhao et al., 2017
In the citing paper
“an increase in the pyrolysis temperature decreased the content of VM (by 60.8-14.9%)for biochars obtained from apple tree branches”
From Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects (2020) · cites this paper as Zhao et al. 2017
In the citing paper
“The increase in the ash content resulted from progressive concentration of inorganic constituents and OM combustion residues”
From Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects (2020) · cites this paper as Zhao et al. 2017
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230 · cited 1×
“) at higher temperature resulted in the lower ratios of H/C and O/C, indicating that the surface of biochar was more aromatic and less hydrophilic [41,42].”
BackgroundSome aspects of the surface chemistry of carbon blacks and other carbons
Boehm, H. P. (1994) · Carbon · doi:10.1016/0008-6223(94)90031-0 · Cited by 3,043 · cited 1×
“The amount of acidic and basic functional groups was measured by the Boehm method [31].”
MethodLehmann, J. (2007) · Nature · doi:10.1038/447143a · Cited by 2,477 · cited 1×
“Biochar is a carbon-rich product and its addition to soil has been proposed as an effective method for C sequestration [61].”
MethodApplication of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081 · cited 1×
“In addition, the H/C and O/C ratios also indicated that the structural transformations [36] and surface hydrophilicity of biochar [40], the higher extent of carbonization and loss of functional groups containing O and H (such as hydroxyl, carboxyl, et al.”
BackgroundSelf-citationThe forms of alkalis in the biochar produced from crop residues at different temperatures
Yuan, J.-H., Xu, R.-K., & Zhang, H. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.11.018 · Cited by 2,029 · cited 3×
“97), hence, the minerals, especially for the carbonates formation (such as Ca 3 3) and inorganic alkalis (such as K and Na), were pro ably the main cause of each biochars’ in [28].”
BackgroundMethodInfluentialImpact of pyrolysis temperature and manure source on physicochemical characteristics of biochar
Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., & Ro, K. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.084 · Cited by 1,502 · cited 6×
“Wave Numbers (cm−1) Characteristic Vibrations (Functionality) 3500–3200 O–H stretching (water, hydrogen-bonded hydroxyl) [13] 2935 C–H stretching (aliphatic CHx; 2935-asymmetric) [13] 1600 Aromatic C=C and C=O stretching of conjugated ketones and quinones [52] 1440 C=C stretching (lignin carbohydrate) [29] 1325 O–H be…”
BackgroundMethodInfluentialAhmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357 · cited 3×
“Wave Numbers (cm−1) Characteristic Vibrations (Functionality) 3500–3200 O–H stretching (water, hydrogen-bonded hydroxyl) [13] 2935 C–H stretching (aliphatic CHx; 2935-asymmetric) [13] 1600 Aromatic C=C and C=O stretching of conjugated ketones and quinones [52] 1440 C=C stretching (lignin carbohydrate) [29] 1325 O–H be…”
BackgroundSurface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171 · cited 1×
“This result was in agreement with the findings in previous studies [56,57].”
ResultChen, X., Chen, G., Chen, L., Chen, Y., Lehmann, J., McBride, M. B., & Hay, A. G. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.078 · Cited by 1,016 · cited 1×
“) at higher temperature resulted in the lower ratios of H/C and O/C, indicating that the surface of biochar was more aromatic and less hydrophilic [41,42].”
BackgroundRonsse, F., van Hecke, S., Dickinson, D., & Prins, W. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12018 · Cited by 1,000 · cited 1×
“This might due to the fact that the increasing temperature resulted in the further crack of the volatiles fractions into low molecular weight liquids and gases instead of biochar [33].”
Background
Cited by
Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects
Tomczyk, A., Sokołowska, Z., & Boguta, P. (2020) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-020-09523-3 · Cited by 2,948
Siedt, M., Schäffer, A., Smith, K. E. C., Nabel, M., Roß-Nickoll, M., & van Dongen, J. T. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141607 · Cited by 563
Janu, R., Mrlik, V., Ribitsch, D., Hofman, J., Sedláček, P., Bielská, L., & Soja, G. (2021) · Carbon Resources Conversion · doi:10.1016/j.crcon.2021.01.003 · Cited by 453
Pariyar, P., Kumari, K., Jain, M. K., & Jadhao, P. S. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.136433 · Cited by 454
Chatterjee, R., Sajjadi, B., Chen, W.-Y., Mattern, D. L., Hammer, N., Raman, V., & Dorris, A. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00085 · Cited by 385
Edeh, I. G., Mašek, O., & Buss, W. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.136857 · Cited by 370
Biochar: Production, properties and emerging role as a support for enzyme immobilization
Pandey, D., Daverey, A., & Arunachalam, K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120267 · Cited by 339
Effect of production temperature on lead removal mechanisms by rice straw biochars
Shen, Z., Hou, D., Jin, F., Shi, J., Fan, X., Tsang, D. C. W., & Alessi, D. S. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.282 · Cited by 306
A critical review on production, modification and utilization of biochar
Xie, Y., Wang, L., Li, H., Westholm, L. J., Carvalho, L., Thorin, E., Yu, Z., Yu, X., & Skreiberg, Ø. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105405 · Cited by 290
Biomass derived functional carbon materials for supercapacitor applications
Rawat, S., Mishra, R. K., & Bhaskar, T. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131961 · Cited by 296
Cheng, D., Ngo, H. H., Guo, W., Chang, S. W., Nguyen, D. D., Zhang, X., Varjani, S., & Liu, Y. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137662 · Cited by 273
Wang, S., Kwak, J.-H., Islam, M. S., Naeth, M. A., Gamal El-Din, M., & Chang, S. X. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.136538 · Cited by 270
Zhao, J., Shen, X.-J., Domene, X., Alcañiz, J.-M., Liao, X., & Palet, C. (2019) · Scientific Reports · doi:10.1038/s41598-019-46234-4 · Cited by 250
Zhu, Z., & Xu, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110308 · Cited by 253
Güleç, F., Williams, O. S. A., Kostas, E. T., Samson, A., & Lester, E. H. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116260 · Cited by 358
Incorporation of biochar in cementitious materials: A roadmap of biochar selection
Maljaee, H., Madadi, R., Paiva, H., Tarelho, L., & Ferreira, V. M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122757 · Cited by 250
Ma, H., Yang, J., Gao, X., Liu, Z., Liu, X., & Xu, Z. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.063 · Cited by 227
Biochar in Water and Wastewater Treatment—A Sustainability Assessment
Kamali, M., Appels, L., Kwon, E. E., Aminabhavi, T. M., & Dewil, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129946 · Cited by 226
Shen, Z., Zhang, J., Hou, D., Tsang, D. C. W., Ok, Y. S., & Alessi, D. S. (2019) · Environment International · doi:10.1016/j.envint.2018.11.045 · Cited by 226
Singh, E., Kumar, A., Mishra, R., You, S., Singh, L., Kumar, S., & Kumar, R. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124278 · Cited by 221
Removal mechanisms of aqueous Cr(VI) using apple wood biochar: a spectroscopic study
Liu, N., Zhang, Y., Xu, C., Liu, P., Lv, J., Liu, Y., & Wang, Q. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121371 · Cited by 218
Zubair, M., Mu’azu, N. D., Jarrah, N., Blaisi, N. I., Aziz, H. A., & A. Al-Harthi, M. (2020) · Water, Air, & Soil Pollution · doi:10.1007/s11270-020-04595-x · Cited by 205
“However, increase in charring time and temperature leads to elimination of organic functionalities with breakage of structure which results in highly porous structure and thermally stable biochars with maximum 10–15% total weight loss at 700–800 °C, corroborating earlier works (Zhao et al. 2017).”
ResultDoes biochar application improve soil aggregation? A meta-analysis
Islam, M. U., Jiang, F., Guo, Z., & Peng, X. (2021) · Soil and Tillage Research · doi:10.1016/j.still.2020.104926 · Cited by 213
Biomass-derived Biochar: From Production to Application in Removing Heavy Metal-Contaminated Water
Chen, W.-H., Hoang, A. T., Nižetić, S., Pandey, A., Cheng, C. K., Luque, R., Ong, H. C., Thomas, S., & Nguyen, X. P. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.02.061 · Cited by 201
Masud, M. A. A., Shin, W. S., Sarker, A., Septian, A., Das, K., Deepo, D. M., Iqbal, M. A., Islam, A. R. M. T., & Malafaia, G. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.166813 · Cited by 181
Algal biodiesel production with engineered biochar as a heterogeneous solid acid catalyst
Behera, B., Selvam S, M., Dey, B., & Balasubramanian, P. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123392 · Cited by 178
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Vendra Singh, S., Chaturvedi, S., Dhyani, V. C., & Kasivelu, G. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123674 · Cited by 149
Shi, J., Fan, X., Tsang, D. C. W., Wang, F., Shen, Z., Hou, D., & Alessi, D. S. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.06.237 · Cited by 175
Al-Musawi, T. J., Mahvi, A. H., Khatibi, A. D., & Balarak, D. (2021) · Journal of Porous Materials · doi:10.1007/s10934-021-01039-7 · Cited by 162
Wijitkosum, S., & Jiwnok, P. (2019) · Applied Sciences · doi:10.3390/app9193980 · Cited by 167
“The main surface functional groups are hydroxyl, methyl, carboxylic and alkene groups [91].”
BackgroundMurtaza, G., Ahmed, Z., Dai, D.-Q., Iqbal, R., Bawazeer, S., Usman, M., Rizwan, M., Iqbal, J., Akram, M. I., Althubiani, A. S., et al. (2022) · Frontiers in Environmental Science · doi:10.3389/fenvs.2022.1035865 · Cited by 176
“are also generated during the pyrolysis process because of cellulose degradation (Zhao et al., 2017).”
Biochar and environmental sustainability: Emerging trends and techno-economic perspectives
Khan, N., Chowdhary, P., Gnansounou, E., & Chaturvedi, P. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125102 · Cited by 150
Rasul, M., Cho, J., Shin, H.-S., & Hur, J. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.150304 · Cited by 154
Kabakcı, S. B., & Baran, S. S. (2019) · Waste Management · doi:10.1016/j.wasman.2019.09.021 · Cited by 156
Biochar-Added Cementitious Materials—A Review on Mechanical, Thermal, and Environmental Properties
Mensah, R. A., Shanmugam, V., Narayanan, S., Razavi, N., Ulfberg, A., Blanksvärd, T., Sayahi, F., Simonsson, P., Reinke, B., Försth, M., et al. (2021) · Sustainability · doi:10.3390/su13169336 · Cited by 177
“Additionally, the stiffness, hardness, and Young’s modulus of biochar increases with pyrolysis temperature and residence time [53,57].”
BackgroundBegum, Y. A., Kumari, S., Jain, S. K., & Garg, M. C. (2024) · Environmental Science Advances · doi:10.1039/d4va00109e · Cited by 198
Peiris, C., Nayanathara, O., Navarathna, C. M., Jayawardhana, Y., Nawalage, S., Burk, G. A., Karunanayake, A. G., Madduri, S. B., Vithanage, M. S., Kaumal, M. N., et al. (2019) · RSC Advances · doi:10.1039/c9ra02729g · Cited by 163
Chakhtouna, H., Benzeid, H., Zari, N., Qaiss, A. E. K., & Bouhfid, R. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.118592 · Cited by 145
Dieguez-Alonso, A., Funke, A., Anca-Couce, A., Rombolà, A., Ojeda, G., Bachmann, J., & Behrendt, F. (2018) · Energies · doi:10.3390/en11030496 · Cited by 141
“These may include: the presence of negatively charged oxygen-containing functional groups on the biochar surface, such as carboxylate (from carboxylic acid) and hydroxyl functional groups [13,18–20], which are reported to decrease with increasing conversion temperature [13,18,19,21,22]; the pH of the solution [18]; th…”
BackgroundBiochar affects the fate of phosphorus in soil and water: A critical review
Ghodszad, L., Reyhanitabar, A., Maghsoodi, M. R., Lajayer, B. A., & Chang, S. X. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131176 · Cited by 151
Poulose, A. M., Elnour, A. Y., Anis, A., Shaikh, H., Al-Zahrani, S. M., George, J., Al-Wabel, M. I., Usman, A. R. A., Ok, Y. S., Tsang, D. C. W., et al. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.11.076 · Cited by 146
Taskin, E., de Castro Bueno, C., Allegretta, I., Terzano, R., Rosa, A. H., & Loffredo, E. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.05.204 · Cited by 138
Biochar as green adsorbents for pharmaceutical pollution in aquatic environments: A review
Aziz, K. H. H., Mustafa, F. S., Hassan, M. A., Omer, K. M., & Hama, S. M. L. (2024) · Desalination · doi:10.1016/j.desal.2024.117725 · Cited by 152
Biomass derived chars for energy applications
Khiari, B., Jeguirim, M., Limousy, L., & Bennici, S. M. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.057 · Cited by 145
Mahmood, F., Ali, M., Khan, M., Mbeugang, C. F. M., Isa, Y. M., Kozlov, A., Penzik, M. V., Xie, X., Yang, H., Zhang, S., et al. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.120830 · Cited by 148
The role of biochar particle size and hydrophobicity in improving soil hydraulic properties
Edeh, I. G., & Mašek, O. (2021) · European Journal of Soil Science · doi:10.1111/ejss.13138 · Cited by 142
“For example, the use of phosphoric acid pretreatment increased the formation of micropores and enhanced specific surface area (Chu et al., 2018; Zhao et al., 2017a).”
BackgroundBiochar from vegetable wastes: agro-environmental characterization
Pradhan, S., Abdelaal, A. H., Mroué, K. H., Al‐Ansari, T. A., Mackey, H. R., & McKay, G. (2020) · Biochar · doi:10.1007/s42773-020-00069-9 · Cited by 142
Rahimi, Z., Anand, A., & Gautam, S. (2022) · Energy Nexus · doi:10.1016/j.nexus.2022.100125 · Cited by 137
Ali, A., Shaheen, S. M., Guo, D., Li, Y., Xiao, R., Wahid, F., Azeem, M., Sohail, K., Zhang, T., Rinklebe, J., et al. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114773 · Cited by 133
Yang, W., Shang, J., Sharma, P., Li, B., Liu, K., & Flury, M. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.12.269 · Cited by 135
Banana pseudo-stem biochar derived from slow and fast pyrolysis process
Abdullah, N., Mohd Taib, R., Mohamad Aziz, N. S., Omar, M. R., & Md Disa, N. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e12940 · Cited by 124
“These values are higher than the percentage of nitrogen of biochar derived from other biomass such as paddy straw, sugarcane bagasse [84], coconut shell, acacia wood [83] and apple tree branch [85], produced at a similar temperature.”
BackgroundSu, H., Zhou, X., Zheng, R., Zhou, Z. C., Zhang, Y., Zhu, G., Yu, C., Hantoko, D., & Yan, M. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.142192 · Cited by 130
Rathnayake, D., Schmidt, H., Leifeld, J., Mayer, J., Epper, C. A., Bucheli, T. D., & Hagemann, N. (2023) · GCB Bioenergy · doi:10.1111/gcbb.13082 · Cited by 130
“Lignin breakdown occurs in a broad range of temperatures (100– 900°C) (Zhao et al., 2017).”
BackgroundA Review on the thermochemical conversion of sugarcane bagasse into biochar
Iwuozor, K. O., Emenike, E. C., Ighalo, J. O., Omoarukhe, F. O., Omuku, P. E., & Adeniyi, A. G. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100162 · Cited by 136
Tomczyk, A., SOKOŁOWSKA, Z., & Boguta, P. (2020) · Fuel · doi:10.1016/j.fuel.2020.118168 · Cited by 123
de Figueiredo, C. C., Reis, A. D. S. P. J., de Araujo, A. S., Blum, L. E. B., Shah, K. V., & Paz‐Ferreiro, J. (2021) · Waste Management · doi:10.1016/j.wasman.2021.01.044 · Cited by 121
Synthesis of carbon nanotubes using biochar as precursor material under microwave irradiation
Hidalgo, P., Navia, R., Hunter, R., Coronado, G., & Gonzalez, M. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.082 · Cited by 111
Supriya, S., Sriram, G., Ngaini, Z., Kavitha, C., Kurkuri, M. D., Padova, I. P. D., & Hegde, G. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00675-0 · Cited by 110
Kumar, N. S., Shaikh, H., Asif, M., & Al‐Ghurabi, E. H. (2021) · Scientific Reports · doi:10.1038/s41598-021-82277-2 · Cited by 117
Qin, S., Shekher Giri, B., Kumar Patel, A., Sar, T., Liu, H., Chen, H., Juneja, A., Kumar, D., Zhang, Z., Kumar Awasthi, M., et al. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124496 · Cited by 106
RetractedChaturvedi, S., Singh, S. V., Dhyani, V. C., Govindaraju, K., Vinu, R., & Mandal, S. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-01239-2 · Cited by 124
Recent Developments in Understanding Biochar’s Physical–Chemistry
Conte, P., Bertani, R., Sgarbossa, P., Bambina, P., Schmidt, H., Raga, R., Papa, G. L., Martino, D. F. C., & Meo, P. L. (2021) · Agronomy · doi:10.3390/agronomy11040615 · Cited by 117
“As an example, the biochar produced from chicken manure revealed an ash content increasing from 40% to 60%, as the temperature rose from 300 ◦C to 600 ◦C [77]; the ash content in the biochar from apple tree branches varied 6–9% as the temperature rose from 300 ◦C to 600 ◦C [93]; the biochar obtained from pine sawdust…”
BackgroundPhiri, Z., Moja, T. N., Nkambule, T. T. I., & de Kock, L. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e25785 · Cited by 106
“The stability of biochar under certain conditions, such as elevated temperature, pressure, and pH, can limit its application [118,122].”
BackgroundAgricultural Waste-Based Biochar for Agronomic Applications
Enaime, G., & Lübken, M. (2021) · Applied Sciences · doi:10.3390/app11198914 · Cited by 116
“10 [64] Apple tree branches/600 ◦C 108.”
RETRACTED: Biochar production: Recent developments, applications, and challenges
Danesh, P., Niaparast, P., Ghorbannezhad, P., & Ali, I. (2022) · Fuel · doi:10.1016/j.fuel.2022.126889 · Cited by 106
RetractedBiochar-Based Strategies for Antibiotics Removal: Mechanisms, Factors, and Application
Jia, Y., Ou, Y., Khanal, S. K., Sun, L., Shu, W.-S., & Lü, H. (2024) · ACS ES&T Engineering · doi:10.1021/acsestengg.3c00605 · Cited by 102
Boguta, P., Sokołowska, Z., Skic, K., & Tomczyk, A. (2019) · Fuel · doi:10.1016/j.fuel.2019.115893 · Cited by 93
Biochar and bio-oil fuel properties from nickel nanoparticles assisted pyrolysis of cassava peel
Egbosiuba, T. C. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e10114 · Cited by 98
“The results of this study are consistent with the literature that reported higher thermal stability when combusted for biochar produced at higher pyrolysis temperature (Askeland et al., 2019; Tomczyk et al., 2020; Zhao et al., 2017).”
ResultBavariani, M. Z., Ronaghi, A., & Ghasemi, R. (2019) · Communications in Soil Science and Plant Analysis · doi:10.1080/00103624.2018.1563101 · Cited by 102
“…is also effective as a soil amendment in improving soil properties, nutrient bioavailability, and crop yield (Conz et al. 2017; Ducey et al. 2017; Glazunova et al. 2017; Hossain et al. 2010; Jeffery et al. 2011; Kameyama, Iwata, and Miyamoto 2017; Vaccari et al. 2011; Zhao, Ta, and Wang 2017).”
BackgroundGupta, R., Pandit, C., Pandit, S., Gupta, P. K., Lahiri, D., Agarwal, D., & Pandey, S. (2022) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-022-01391-z · Cited by 107
“As the pH increases, ash, and carbon content increase [79]”
BackgroundFood waste biochar: a sustainable solution for agriculture application and soil–water remediation
Pradhan, S., Parthasarathy, P., Mackey, H. R., Al‐Ansari, T. A., & McKay, G. (2024) · Carbon Research · doi:10.1007/s44246-024-00123-2 · Cited by 104
“Zhao et al. (2017) reported that the CEC of alkaline biochar is more efficient to uptake cationic nutrients.”
Sbizzaro, M., Sampaio, S. C., dos Reis, R. R., Beraldi, F. D. A., Rosa, D. M., Maia, C. M. B. D. F., Cordovil, C. M. D. S., do Nascimento, C. T., da Silva, E. A., & Borba, C. E. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.117667 · Cited by 101
Wet and dry? Influence of hydrothermal carbonization on the pyrolysis of spent grains
Olszewski, M. P., Nicolae, S. A., Arauzo, P. J., Titirici, M., & Kruse, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121101 · Cited by 96
Uroić Štefanko, A., & Leszczynska, D. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00138 · Cited by 92
Muigai, H. H., Bordoloi, U., Hussain, R., Ravi, K., Moholkar, V. S., & Kalita, P. (2020) · International Journal of Energy Research · doi:10.1002/er.6092 · Cited by 94
Evaluation of the Use of Sewage Sludge Biochar as a Soil Amendment—A Review
Goldan, E., Nedeff, V., Bârsan, N., Culea, M., Tomozei, C. M., Panainte-Lehăduș, M., & Moșneguțu, E. (2022) · Sustainability · doi:10.3390/su14095309 · Cited by 112
Subratti, A., Vidal, J. L., Lalgee, L. J., Kerton, F. M., & Jalsa, N. K. (2021) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2021.100421 · Cited by 96
Li, X., Jiang, X., Song, Y., & Chang, S. X. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124260 · Cited by 89
Konneh, M., Wandera, S. M., Murunga, S. I., & Raude, J. M. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e08458 · Cited by 94
“These results were in conformities with similar studies using agricultural biochars conducted by Zhao et al. (2017); Domingues et al. (2017) and Gai et al. (2014).”
ResultGhorbani, M., Amirahmadi, E., Neugschwandtner, R. W., Konvalina, P., Kopecký, M., Moudrý, J., Perná, K., & Murindangabo, Y. T. (2022) · Sustainability · doi:10.3390/su142214722 · Cited by 90
Zama, E. F., Li, G., Tang, Y.-T., Reid, B. J., Ngwabie, N. M., & Sun, G. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.118241 · Cited by 83
Zouari, M., DeVallance, D. B., & Marrot, L. (2022) · Materials · doi:10.3390/ma15062271 · Cited by 86
“0016 cc/g for microporous SA and microporous TPV from CO2 measurements, respectively [28].”
MethodAzeem, M., Shaheen, S. M., Ali, A., Jeyasundar, P. G. S. A., Latif, A., Abdelrahman, H. M., Li, R., Almazroui, M., Niazi, N. K., Sarmah, A. K., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.128131 · Cited by 84
Murtaza, G., Ahmed, Z., & Usman, M. (2022) · Arabian Journal of Geosciences · doi:10.1007/s12517-022-09539-9 · Cited by 84
“appearance of basic functional groups and disappearance of acidic functional groups provide additional support (Adewuyi et al., 2021; Zhao et al., 2017).”
BackgroundYu, S., Zhang, W., Dong, X., Wang, F., Yang, W., Liu, C., & Chen, D. (2024) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.111638 · Cited by 79
Enhancement of selective adsorption of Cr species via modification of pine biomass
Zhao, J., Boada, R., Cibin, G., & Palet, C. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143816 · Cited by 83
Singh, G., Mavi, M. S., Choudhary, O. P., Gupta, N. K., & Singh, Y. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113277 · Cited by 82
4D structural changes and pore network model of biomass during pyrolysis
Edeh, I. G., Mašek, O., & Fußeis, F. (2023) · Scientific Reports · doi:10.1038/s41598-023-49919-z · Cited by 82
“An increase in surface area particularly with increasing pyrolysis temperature is related to the degradation of aliphatic alkyl and ester groups 7,23, 28, 34–36 The most remarkable development of porosity in the observable pore size range happens at lower pyrolysis temperatures (350–450 °C).”
BackgroundMuhammad, N., Nafees, M., Khan, M. H., Ge, L., & Lisak, G. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2019.113887 · Cited by 81
Güleç, F., Williams, O. S. A., Kostas, E. T., Samson, A., Stevens, L. A., & Lester, E. H. (2022) · Fuel · doi:10.1016/j.fuel.2022.125428 · Cited by 77
Tomczyk, A., Kondracki, B., & Szewczuk‐Karpisz, K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.137238 · Cited by 79
Amer, N. M., Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02905-3 · Cited by 78
“According to the literature, it can be concluded that higher pyrolysis temperatures lead to increased biochar surface area and microporosity with a higher concentration of basic functional groups, which are beneficial attributes for CO 2 capture [134, 156, 163, 166, 167].”
Alleviating sulfide toxicity using biochar during anaerobic treatment of sulfate-laden wastewater
Oliveira, F. R., Surendra, K. C., Jaisi, D. P., Lü, H., Unal-Tosun, G., Sung, S., & Khanal, S. K. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122711 · Cited by 74
Adamian, Y., Lonappan, L., Alokpa, K., Agathos, S. N., & Cabana, H. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.778239 · Cited by 80
Gohar, H., Khoja, A. H., Ansari, A. A., Naqvi, S. R., Liaquat, R., Hassan, M., Hasni, K., Qazi, U. Y., & Ali, I. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.05.063 · Cited by 78
Chand, R., Borugadda, V. B., Qiu, M., & Dalai, A. K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113679 · Cited by 73
Acclimatized activated sludge for enhanced phenolic wastewater treatment using pinewood biochar
Kamali, M., Aminabhavi, T. M., Tarelho, L. A. C., Hellemans, R., Cuypers, J., Capela, I., Costa, M. E. V., Dewil, R., & Appels, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131708 · Cited by 71
Usevičiūtė, L., & Baltrėnaitė, E. (2020) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00711-3 · Cited by 75
Maaoui, A., Ben Hassen Trabelsi, A., Ben Abdallah, A., Chagtmi, R., Lopez, G., Cortazar, M., & Olazar, M. (2023) · Journal of the Energy Institute · doi:10.1016/j.joei.2023.101242 · Cited by 69
Metadata
- Authors
- Zhao, S.-X., Ta, N., & Wang, X.-D.
- Affiliations
- Northwest A&F University (CN)
- College of Resources & Environment, Northwest A&F University, 3 Taicheng Road, Yangling 712100, China
- ORCID
- Ta, Na
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2017-08-30
- Volume
- 10
- Issue
- 9
- Pages
- 1293
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2752380498
- Cited by
- 585
- References
- 62
- Citations by year
- 2026: 49 · 2025: 58 · 2024: 95 · 2023: 92 · 2022: 89 · 2021: 89 · 2020: 55 · 2019: 40 · 2018: 15 · 2017: 3
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Key Technology R&D Program of the Ministry of Science and Technology, China (2012BAD14B11)
- Special Fund for Agro-scientific Research in the Public Interest of the Ministry of Agriculture, China (201503116)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Life Sciences › Agricultural and Biological Sciences › Soil Science › Soil Carbon and Nitrogen Dynamics
- Keywords
- biochar, pyrolysis temperature, physicochemical properties, structural properties, functional groups, surface area and porosity, thermal stability, cation exchange capacity, fixed carbon, agricultural waste valorization, Loess Plateau
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.