Effectiveness Analysis of PMSM Motor Rolling Bearing Fault Detectors Based on Vibration Analysis and Shallow Neural Networks
Open accessThe DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Permanent magnet synchronous motors (PMSMs) are becoming more popular, both in industrial applications and in electric and hybrid vehicle drives. Unfortunately, like the others, these are not reliable drives. As in the drive systems with induction motors, the rolling bearings can often fail. This paper focuses on the possibility of detecting this type of mechanical damage by analysing mechanical vibrations supported by shallow neural networks (NNs). For the extraction of diagnostic symptoms, the Fast Fourier Transform (FFT) and the Hilbert transform (HT) were used to obtain the envelope signal, which was subjected to the FFT analysis. Three types of neural networks were tested to automate the detection process: multilayer perceptron (MLP), neural network with radial base function (RBF), and Kohonen map (self-organizing map, SOM). The input signals of these networks were the amplitudes of harmonic components characteristic of damage to bearing elements, obtained as a result of FFT or HT analysis of the vibration acceleration signal. The effectiveness of the analysed NN structures was compared from the point of view of the influence of the network architecture and various parameters of the learning process on the detection effectiveness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Most studies are carried out using physically damaged bearings by cutting, drilling or electrically engraved pitting of the component [117], [120], [121], [125], [127], [129], [138]- [140].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [121]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neural Networks: A Comprehensive Foundation
Haykin, S. (1998) · Cited by 30,070
Neural Networks: A Pattern Recognition Perspective
Bishop, C. (1996) · Handbook of Neural Computation · doi:10.1201/9781420050646.ptb6 · Cited by 1,596
Tandon, N., & Choudhury, A. (1999) · Tribology International · doi:10.1016/s0301-679x(99)00077-8 · Cited by 1,351 · cited 3×
“…the frequencies characteristic harmonics for failures of individual bearing elements can be determined on the basis of the formulas below [21,22,24]: where: N b —number of rolling elements (balls), D b —rolling element diameter, D c —bearing pitch diameter, β — bearing working angle (0 o for…”
BackgroundNeural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797 · cited 3×
“Then the frequencies characteristic harmonics for failures of individual bearing elements can be determined on the basis of the formulas below [21,22,24]: bc = 1 2 − D b D c • • where: n —motor velocity (rpm).”
Background(2003) · doi:10.1016/b978-0-7506-7444-7.x5036-5 · Cited by 603
Liu, Z., & Zhang, L. (2020) · Measurement · doi:10.1016/j.measurement.2019.107002 · Cited by 535 · cited 2×
“…result from improper assembly, often they are also caused by improper selection of the bearing to the drive requirements and its improper operation [26–29]. often, they result from improper assembly, often they are also caused by improper selection of the bearing to the drive requirements and its…”
BackgroundYu, H., & Wilamowski, B. (2011) · Electrical Engineering Handbook · doi:10.1201/b10604-15 · Cited by 395 · cited 2×
“…[35,37,38]: ( ) where: w n —weight of the network, µ —regularization factor determining the algorithm operation, J n —Jacobian matrix, e n —learning error, η —learning rate. of individual strategies in the obtained result, µ also fulfils the function of the step size towards improvement [35,37,38].”
BackgroundMethodA Motor Current Signal-Based Bearing Fault Diagnosis Using Deep Learning and Information Fusion
Hoang, D. T., & Kang, H. J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2933119 · Cited by 378
Espinosa, A. G., Rosero, J. A., Cusido, J., Romeral, L., & Ortega, J. A. (2010) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2037922 · Cited by 243 · cited 1×
“…[31]: where: a ENV ( t )—instantaneous amplitude of the envelope of original signal x ( t ), ϕ ( t )— instantaneous phase calculated as follows [31,32]: Analysis of the a ENV ( t ) signal makes it possible to find the frequencies characteristic for failures in the medium-frequency range of the…”
BackgroundFaults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review
Chen, Y., Liang, S., Li, W., Liang, H., & Wang, C. (2019) · Applied Sciences · doi:10.3390/app9102116 · Cited by 194
Research works printed but not linked: 3
- Radu, C. The Most Common Causes of Bearing Failure and the Importance of Bearing Lubrication. RKB Technical Review. Febru- ary 2010, pp. 1-7. Available online: https://www.rkbbearings.com/en/publications.php#sec12 (accessed on 23 December 2020).
- Bearing Damage and Failure Analysis, SKF Group, PUB BU/I3 14219/2 EN. June 2017, pp. 1-106. Available online: https: //www.skf.com/binaries/pub12/Images/0901d1968064c148-Bearing-failures---14219_2-EN_tcm_12-297619.pdf (accessed on 23 December 2020).
- Perner, P., Ed.; Lecture Notes in Computer Science; Springer: Cham, Switzerland, 2016; Volume 9728. [CrossRef]
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
Self-citationFault Detection and Diagnosis of the Electric Motor Drive and Battery System of Electric Vehicles
Khaneghah, M. Z., Alzayed, M., & Chaoui, H. (2023) · Machines · doi:10.3390/machines11070713 · Cited by 139
Bagri, I., Tahiry, K., Hraiba, A., Touil, A., & Mousrij, A. (2024) · Vibration · doi:10.3390/vibration7040054 · Cited by 95
Pietrzak, P., & Wolkiewicz, M. (2023) · Sensors · doi:10.3390/s23041757 · Cited by 76
“Among the mechanical damage, eccentricity and bearing damage are the most common [7].”
BackgroundEvent-Based Anomaly Detection Using a One-Class SVM for a Hybrid Electric Vehicle
Ji, Y., & Lee, H. (2022) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2022.3165526 · Cited by 62
Metadata
- Authors
- Ewert, P., Orlowska-Kowalska, T., & Jankowska, K.
- Affiliations
- Wrocław University of Science and Technology (PL)
- Department of Electrical Machines, Drives and Measurements, Wroclaw University of Science and Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
- Corresponding author
- Ewert, Pawel
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2021-01-30
- Volume
- 14
- Issue
- 3
- Pages
- 712
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W3127815279
- Cited by
- 48
- References
- 48
- Citations by year
- 2026: 4 · 2025: 6 · 2024: 10 · 2023: 12 · 2022: 8 · 2021: 8
- FWCI
- 4.23
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Narodowe Centrum Nauki (2017/27/B/ST7/00816)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- permanent magnet synchronous motor, rolling bearing fault detection, vibration analysis, shallow neural networks, envelope analysis, Hilbert transform, multilayer perceptron, radial basis function neural network, self-organizing maps, electric vehicle drives
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.