Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review
Open accessThe DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index; 3 of the 67 sources its claims cite were checked for support.
Abstract
Electric Vehicles (EV) significantly contribute to reducing carbon emissions and promoting sustainable transportation. Among EV technologies, hybrid energy storage systems (HESS), which combine fuel cells, power batteries, and supercapacitors, have been widely adopted to enhance energy density, power density, and system efficiency. Bidirectional DC-DC converters are pivotal in HESS, enabling efficient energy management, voltage matching, and bidirectional energy flow between storage devices and vehicle systems. This paper provides a comprehensive review of bidirectional DC-DC converter topologies for EV applications, which focuses on both non-isolated and isolated designs. Non-isolated topologies, such as Buck-Boost, Ćuk, and interleaved converters, are featured for their simplicity, efficiency, and compactness. Isolated topologies, such as dual active bridge (DAB) and push-pull converters, are featured for their high voltage gain and electrical isolation. An evaluation framework is proposed, incorporating key performance metrics such as voltage stress, current stress, power density, and switching frequency. The results highlight the strengths and limitations of various converter topologies, offering insights into their optimization for EV applications. Future research directions include integrating wide-bandgap devices, advanced control strategies, and novel topologies to address challenges such as wide voltage gain, high efficiency, and compact design. This work underscores the critical role of bidirectional DC-DC converters in advancing energy-efficient and sustainable EV technologies.
Overview
CoChat Summary
TL;DR
This review surveys bidirectional DC-DC converter topologies for hybrid energy storage systems in electric vehicles, covering non-isolated and isolated designs. It proposes an evaluation framework and compares topologies using metrics such as voltage/current stress, efficiency, power density, voltage gain range, switching frequency, device count, and common ground.
Key findings
- Non-isolated topologies reviewed include Buck/Boost, Buck-Boost, Ćuk, SEPIC/Zeta, interleaved, three-level, cascaded, and switched-capacitor; isolated topologies include flyback, push-pull, Ćuk, forward, DAB, dual half-bridge, and half-full.
- The proposed evaluation framework uses eight metrics for non-isolated converters (voltage stress, current stress, conversion efficiency, power density, voltage gain range, switching frequency, number of devices, common ground) and six for isolated converters (voltage stress, current stress, number of components, power density, conversion efficiency, transformer design).
- The three-level bidirectional converter case study reports typical efficiency of 90–94%, switching frequency of 30–100 kHz, and ability to handle supercapacitor voltage from 16 V to 48 V. The BYDBDC300-750 industrial module is described with rated input 200–450 V, output 16–60 V, maximum output power 15 kW, adaptive switching frequency 50–80 kHz, peak efficiency 93.5%, volume 4.2 L, weight 5.3 kg, power density 3.6 kW/L, and 92–94% efficiency over a 10–15 kW load range; under a 450 V bus, maximum voltage stress per transistor is approximately 225 V.
- Cascaded topologies show estimated efficiency ranges from 85–96% depending on sub-topologies, e.g., interleaved + switched-capacitor at 92–96% and Buck + Boost at 85–89%. Future directions include wide-bandgap devices, advanced control strategies, and novel topologies.
Methods
- Design: comprehensive review and classification of bidirectional DC-DC converter topologies for HESS in EVs, with qualitative comparison rather than primary experimental work.
- Data/sample: literature on non-isolated and isolated bidirectional DC-DC converters, plus an industrial case study of the BYDBDC300-750 three-level converter used in BYD vehicles.
- Analysis: comparative tables and radar charts scoring topologies from 0 to 5 across selected metrics; the paper states scores for key metrics such as conversion efficiency and power density were derived from literature experimental results and standardized benchmarks.
Limitations
- The paper states that advantages and disadvantages of topologies are relative, no single topology excels in all evaluation metrics, and efficiency/power density depend on operating frequency, rated power, and component count, making single-criterion comparison impossible.
- The paper notes cascaded converters have larger size, higher manufacturing cost, overall efficiency determined by the product of sub-converter efficiencies, and inherited drawbacks of sub-topologies.
- Evident from the text: the review does not describe a systematic search or selection protocol, reports no primary experimental validation, and does not fully detail how radar-chart scores were assigned beyond stating they came from literature and benchmarks.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
2 Valid · 12 Not valid · 66 Not checked · 61 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The ´ Cuk converter, widely utilized in EVs, is renowned for its consistently stable input and output currents [44].”
What the sources say
- Could not verifycites [44] Song, 2014, Non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents, J. Power Electron. sourceExperimental — accuracy not yet measured
The Introduction lists Ćuk among non-isolated bidirectional converters and discusses automotive applications of bidirectional converters generally. It does not describe Ćuk input or output currents as stable, or establish that Ćuk converters are widely used in EVs. Searches for Ćuk and input/output current characteristics found no passage addressing those claims. (LLM, conf=0.73)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“These systems impose stringent performance requirements on bidirectional converters, with evaluation metrics spanning multiple aspects, including thermal performance, dynamic response speed, voltage conversion ratio, input current ripple, voltage and current stress, conversion efficiency, power density, device count, voltage conversion slope, and the presence of common ground [11].”
What the sources say
- Partly supportedcites [11] Wang, 2022, Review of bidirectional DC–DC converter topologies for hybrid energy storage system of new energy vehicles, Green Energy Intell. Transp. sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 2 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Due to its reduced switching and conduction losses, this topology typically achieves an efficiency range of 90-94%, even under varying load conditions.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“For instance, under a 450 V bus, the maximum voltage stress for a single transistor is approximately 225 V.”
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“This converter utilizes the forward structure to enable bidirectional power flow [81].”
What the sources say
- Not checked — no full text of the sourcecites [81] Khodabakhshian, 2016, Forward-type resonant bidirectional DC–DC converter, IET Power Electron. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
35 more claims
Create a free account to see all 141 claims and to verify the 3 references still open.
- It may state two separate claims as one. 78
- Probably not a substantial claim. 39
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.2.5. Topologies of Isolated Bidirectional DAB DC-DC Converters · p. 17
“| ´ Cuk Figure 5b | ND 1 - D | 2 | 4 | 2 | 2 |”
§ 2.2.1. Topologies of Isolated Bidirectional Flyback DC-DC Converters · p. 13
“Figure 5. Basic isolated bidirectional DC-DC converters topology classification. ( a ) Flyback. ( b ) PushPull. ( c ) ´ Cuk. ( d ) Forward.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ To cite this version: · p. 1
“Yan Tong, Issam Salhi, Qin Wang, Shengyu Wu. Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review.”
§ Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review · p. 2
“Yan Tong 1 , Issam Salhi 2 , Qin Wang 1,3, * , Gang Lu 4 and Shengyu Wu 4”
Citations
Cites
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182 · cited 1×
“The continuous use of fossil fuels, including oil and natural gas, along with the rising levels of greenhouse gas emissions, has caused serious consequences for the climate and environment [2].”
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123 · cited 1×
“This bidirectional topology is realized by replacing the unidirectional power switches in the Buck and Boost converters with bidirectional power switches, enabling the circuit to facilitate bidirectional power flow [39].”
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817 · cited 1×
“To address this, the system incorporates a SC as an auxiliary energy storage unit [20].”
CO₂ and Greenhouse Gas Emissions
Ritchie, H., & Roser, M. (2020) · Cited by 1,517
Zhao, B., Yu, Q., & Sun, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2180928 · Cited by 932 · cited 1×
“EPSC is particularly beneficial in applications requiring wide voltage gain ranges and improved efficiency under light-load conditions [103].”
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782 · cited 1×
“Reference [93] presents a converter based on the dual half-bridge topology, where the primary side employs a current-fed half-bridge structure, and the secondary side uses a voltage-fed half-bridge structure [94].”
Hybrid electric vehicles and their challenges: A review
Hannan, M. A., Azidin, F. A., & Mohamed, A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.097 · Cited by 766 · cited 1×
“EVs comprise five fundamental systems that facilitate their operation [15].”
Friedlingstein, P., Houghton, R. A., Marland, G., Hackler, J., Boden, T. A., Conway, T. J., Canadell, J. G., Raupach, M. R., Ciais, P., & Le Quéré, C. (2010) · Nature Geoscience · doi:10.1038/ngeo1022 · Cited by 663
The impact of plug-in hybrid electric vehicles on distribution networks: A review and outlook
Green, R. C., Wang, L., & Alam, M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.015 · Cited by 640 · cited 1×
“When the powertrain demand is minimal, the power battery independently supplies energy; during rapid power fluctuations, the SC delivers instantaneous energy; and when the power battery lacks sufficient energy, the FC activates to maintain the energy supply [24].”
Hydrogen energy systems: Technologies, trends, and future prospects
Sadeq, A. M., Homod, R. Z., Hussein, A. K., Togun, H., Mahmoodi, A., Isleem, H. F., Patil, A. R., & Moghaddam, A. H. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173622 · Cited by 528 · cited 1×
“With the global expansion of renewable energy sources (RES), solutions that leverage renewable electricity to decarbonize end-use energy have garnered significant attention [1].”
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501 · cited 1×
“Figure 8a depicts a dual half-bridge topology for bidirectional isolated converters, with voltage-fed half-bridge structures on both sides of the transformer [91,92].”
Analysis and Design of High-Frequency Isolated Dual-Bridge Series Resonant DC/DC Converter
Li, X., & Bhat, A. K. S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2034662 · Cited by 493 · cited 2×
“The design of back-to-back converters can adopt either voltage-fed or current-fed configurations, with the topology implemented in half-bridge or full-bridge arrangements [87].”
The fuel cell electric vehicles: The highlight review
Pramuanjaroenkij, A., & Kakaç, S. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.103 · Cited by 469 · cited 1×
“• Fuel Cell Electric Vehicles [14]: FCEV are a type of electric vehicle equipped with a fuel cell power system that converts the chemical energy of fuel into electrical energy, with hydrogen being the most commonly used fuel.”
High-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411 · cited 1×
“This technique is particularly well-suited for high-power-density applications, as interleaving evenly distributes the current across multiple phases, which reduces the current stress on each phase [51].”
Automotive DC-DC bidirectional converter made with many interleaved buck stages
Garcia, O., Zumel, P., de Castro, A., & Cobos, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872379 · Cited by 405 · cited 2×
“Research has demonstrated that interleaving technology can significantly reduce the size of filters, improve dynamic response, and optimize thermal management performance [52].”
Sliding mode control of DC/DC converters
Utkin, V. (2013) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2013.02.026 · Cited by 380 · cited 1×
“By driving the sys-tem towards a predefined sliding surface, SMC achieves high dynamic performance and minimizes overshoot during transients [107].”
A comprehensive review on estimation strategies used in hybrid and battery electric vehicles
Cuma, M. U., & Koroglu, T. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.047 · Cited by 344 · cited 1×
“• Battery Electric Vehicles [13]: BEV are fully powered by batteries, relying exclusively on electrical energy to drive their motors, with an inverter used to transfer power.”
Du, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433359 · Cited by 314 · cited 1×
“Conversely, in reverse operation mode ( V H to V L ), the converter functions as a Buck converter, which steps down the high voltage to a lower output voltage suitable for the load [40].”
High-Power Bidirectional DC–DC Converter for Aerospace Applications
Naayagi, R. T., Forsyth, A. J., & Shuttleworth, R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2184771 · Cited by 305 · cited 1×
“As a result, in electric and hybrid vehicles, sc typically operates in conjunction with power batteries, assisting in energy recuperation and transient power compensation [33].”
A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296 · cited 1×
“Reference [93] presents a converter based on the dual half-bridge topology, where the primary side employs a current-fed half-bridge structure, and the secondary side uses a voltage-fed half-bridge structure [94].”
A Comprehensive Review on Solar Powered Electric Vehicle Charging System
Khan, S., Ahmad, A., Ahmad, F., Shafaati Shemami, M., Saad Alam, M., & Khateeb, S. (2018) · Smart Science · doi:10.1080/23080477.2017.1419054 · Cited by 284
New DC–DC converter for energy storage system interfacing in fuel cell hybrid electric vehicles
Marchesoni, M., & Vacca, C. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886650 · Cited by 263 · cited 1×
“• Push-Pull-Forward Converter [85]: The primary side utilizes a push-pull topology to deliver high power density and symmetric operation, while the secondary side adopts a forward topology to enhance dynamic response and stability.”
A Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications
Grbovic, P. J., Delarue, P., Le Moigne, P., & Bartholomeus, P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2038338 · Cited by 248 · cited 1×
“This design enhances system reliability and allows for the use of lower-rated power devices, which effectively reduce costs and minimise the overall system size [57].”
Three-level bidirectional converter for fuel-cell/battery hybrid power system
Jin, K., Yang, M., Ruan, X., & Xu, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031197 · Cited by 245 · cited 1×
“The bidirectional Buck-Boost converter can be derived from a unidirectional converter by replacing the unidirectional power switches in the traditional topology with bidirectional power switches [41].”
Comparing DC-DC converters for power management in hybrid electric vehicles
Schupbach, R. M., & Balda, J. C. (2003) · IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. · doi:10.1109/iemdc.2003.1210630 · Cited by 244 · cited 1×
“When power flows from the low side to the high side, the circuit operates as a SEPIC converter, which provides a boost function [49].”
A magnetic-less DC-DC converter for dual-voltage automotive systems
Peng, F. Z., Zhang, F., & Qian, Z. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808945 · Cited by 209 · cited 1×
“For instance, studies in references [53,54] propose various interleaved bidirectional topologies characterized by inductors that can be connected in either directly coupled or inversely coupled configurations.”
Caricchi, F., Crescimbini, F., Capponi, F. G., & Solero, L. (2002) · APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1998.647705 · Cited by 206 · cited 3×
“This bidirectional ´ Cuk converter retains the core characteristics of its unidirectional counterpart and enables bidirectional power flow, which expands its applicability to a broader range of scenarios [45].”
InfluentialComparative analysis of bidirectional three-level DC–DC converter for automotive applications
Dusmez, S., Hasanzadeh, A., & Khaligh, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336605 · Cited by 204 · cited 1×
“The operating principle of the three-level bidirectional converter is based on a capacitive voltage divider, which splits the input or output voltage into two equal parts, ensuring that each switching device is subjected to only half of the total input or output voltage stress [58].”
Zhang, Y., Gao, Y., Li, J., & Sumner, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2719402 · Cited by 202
Wang, P., Zhou, L., Zhang, Y., Li, J., & Sumner, M. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2688324 · Cited by 201 · cited 1×
“Although this cascaded configuration introduces additional components compared to a single bidirectional buck-boost converter, it achieves a significantly higher voltage gain ratio under the same switching duty cycle [60].”
Jia, C., He, H., Zhou, J., Li, K., Li, J., & Wei, Z. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.02.181 · Cited by 195 · cited 1×
“The aim is to provide theoretical insights and technical guidance to support advancements and optimizations in this evolving field [38].”
Jia, C., He, H., Zhou, J., Li, J., Wei, Z., & Li, K. (2024) · Applied Energy · doi:10.1016/j.apenergy.2023.122228 · Cited by 190 · cited 1×
“As the global population grows, incomes rise, and an increasing number of people gain access to cars, trains, and aeroplanes [3], it is anticipated that worldwide transportation demand will surge in the coming decades [4].”
Huang, X., Lee, F. C., Li, Q., & Du, W. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2476482 · Cited by 188 · cited 1×
“For instance, studies in references [53,54] propose various interleaved bidirectional topologies characterized by inductors that can be connected in either directly coupled or inversely coupled configurations.”
Novel forward–flyback hybrid bidirectional DC–DC converter
Zhang, F., & Yan, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2009561 · Cited by 184 · cited 1×
“By introducing a clamping circuit, zero-voltage switching (ZVS) is achieved within the converter [82].”
Study of a non-isolated bidirectional DC–DC converter
Lin, C. ‐., Yang, L. ‐., & Wu, G. W. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0338 · Cited by 180 · cited 1×
“The topology of the three-level bidirectional DC-DC converter, as shown in Figure 4b, incorporates a three-level structure that significantly reduces the voltage stress across the power switches [56].”
Li, K., Zhou, J., Jia, C., Yi, F., & Zhang, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.05.311 · Cited by 180
Zhang, Y., Liu, Q., Gao, Y., Li, J., & Sumner, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850020 · Cited by 178
Yap, K. Y., Chin, H. H., & Klemeš, J. J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112862 · Cited by 178 · cited 1×
“Furthermore, HEV remains compatible with regenerative braking systems, ensuring energy recovery and improved efficiency under diverse driving conditions [28].”
A review of non-isolated bidirectional dc-dc converters for energy storage systems
Tytelmaier, K., Husev, O., Veligorskyi, O., & Yershov, R. (2016) · 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF) · doi:10.1109/ysf.2016.7753752 · Cited by 174 · cited 1×
“To further improve the recovery of braking energy [34], the converter must maintain a stable output even under low input voltage conditions.”
Bryant, B., & Kazimierczuk, M. K. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.853904 · Cited by 167 · cited 1×
“It simplifies the loop compensation design and effectively limits the current in overload conditions, making it a robust choice for high-power applications [106].”
The use of parking lots to solar-charge electric vehicles
Nunes, P., Figueiredo, R., & Brito, M. C. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.08.015 · Cited by 162 · cited 1×
“Figure 1d illustrates the HESS architecture in Hybrid Electric Vehicles (HEV) [25].”
Electric vehicles charging control in a smart grid: A model predictive control approach
Di Giorgio, A., Liberati, F., & Canale, S. (2014) · Control Engineering Practice · doi:10.1016/j.conengprac.2013.10.005 · Cited by 155 · cited 1×
“Its ability to handle multi-objective optimization makes it ideal for complex energy systems [105].”
Jia, C., Zhou, J., He, H., Li, J., Wei, Z., Li, K., & Shi, M. (2023) · Energy · doi:10.1016/j.energy.2023.127105 · Cited by 155
Wang, J., Wang, B., Zhang, L., Wang, J., Shchurov, N. I., & Malozyomov, B. V. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100010 · Cited by 153
Min, J., & Ordonez, M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3033982 · Cited by 152 · cited 1×
“[ 95,96] propose an isolated bidirectional DC-DC converter designed with a voltage-fed half-bridge topology on the transformer’s primary side and a full-bridge topology on the secondary side.”
Lu, D., Yi, F., Hu, D., Li, J., Yang, Q., & Wang, J. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121516 · Cited by 150
Zhang, Y., Liu, Q., Li, J., & Sumner, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2756603 · Cited by 144
Onar, O. C., Kobayashi, J., Erb, D. C., & Khaligh, A. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2192459 · Cited by 139 · cited 1×
“By integrating various energy storage devices—such as fuel cells (FC), power batteries, and supercapacitors (SC)—HESS enables the rational distribution of energy under different operating conditions, thereby improving vehicle power response and energy utilization efficiency [17].”
Generalized structure of bi-directional switched-capacitor DC/DC converters
Chung, H. S.-H., Ioinovici, A., & Cheung, W.-L. (2003) · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · doi:10.1109/tcsi.2003.812615 · Cited by 134 · cited 2×
“This converter achieves its functionality by extending the unidirectional switched-capacitor units into a bidirectional configuration [67].”
Shen, A., & Zhang, J. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113965 · Cited by 131 · cited 2×
“Hybrid Electric Vehicles [7]: HEV includes gasoline-electric hybrid vehicles and plug-in gasoline-electric hybrid vehicles, which utilize two or more energy sources to generate kinetic energy.”
Jia, C., Zhou, J., He, H., Li, J., Wei, Z., & Li, K. (2024) · Energy · doi:10.1016/j.energy.2023.130146 · Cited by 131 · cited 1×
“Such a design not only delivers a high voltage conversion ratio but also offers additional benefits, including electrical isolation between the input and output sides [71].”
The impact of plug-in hybrid electric vehicles on distribution networks: a review and outlook
Green, R. C., Wang, L., & Alam, M. (2010) · IEEE PES General Meeting · doi:10.1109/pes.2010.5589654 · Cited by 128
Jia, C., Liu, W., He, H., & Chau, K. T. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.119032 · Cited by 125 · cited 1×
“The Hybrid Energy Storage System (HESS), as an advanced energy storage solution, has been widely adopted in the field of EV, primarily to simultaneously meet the demands for power density and energy density, optimize energy management, and enhance both system efficiency and lifespan [16].”
Lee, H.-S., & Yun, J.-J. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2860059 · Cited by 123 · cited 3×
“More specifically, the bidirectional Buck-Boost converter operates in the forward mode by stepping the input voltage either up or down to the desired output voltage [42].”
InfluentialJia, C., He, H., Zhou, J., Li, J., Wei, Z., Li, K., & Li, M. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.338 · Cited by 123 · cited 1×
“This visual tool effectively highlights each topology’s relative strengths and weaknesses, which offers valuable insights for their optimization and design [113].”
Zhou, J., Shu, X., Zhang, J., Yi, F., Jia, C., Zhang, C., Kong, X., Zhang, J., & Wu, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.11.127 · Cited by 119
Bidirectional DC-DC converter modeling and unified controller with digital implementation
Zhang, J., Lai, J.-S., & Yu, W. (2008) · 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522963 · Cited by 115 · cited 2×
“EV systems demand high efficiency, reliability, and low ripple characteristics from converters [37].”
A review of pivotal energy management strategies for extended range electric vehicles
Xiao, B., Ruan, J., Yang, W., Walker, P. D., & Zhang, N. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111194 · Cited by 112 · cited 1×
“EREV is a subset of new energy vehicles, aiming to combine the advantages of HEVs and BEVs and provide a solution to reducing tailpipe emissions whilst providing satisfactory driving range compared with traditional internal combustion engine (ICE) vehicle counterparts [12].”
Non-isolated buck–boost dc–dc converter with quadratic voltage gain ratio
Gorji, S. A., Mostaan, A., Tran My, H., & Ektesabi, M. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5703 · Cited by 109 · cited 2×
“Reference [74] introduces a bidirectional flyback converter employing a unidirectional-excitation high-frequency transformer.”
Public attitudes and sentiments towards new energy vehicles in China: A text mining approach
Wu, Z., He, Q., Li, J., Bi, G., & Antwi‐Afari, M. F. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113242 · Cited by 108 · cited 1×
“According to the different sources of driving power, EVs are generally divided into the following four categories [10]: Hybrid Electric Vehicles (HEV), Battery Electric Vehicles (BEV), Fuel Cell Electric Vehicles (FCEV), Plug-in Hybrid Electric Vehicle (PHEV) [11].”
InfluentialZhang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134051 · Cited by 102 · cited 1×
“In [83], further optimization of the bidirectional forward DC-DC converter was explored [84].”
Fardahar, S. M., & Sabahi, M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2932325 · Cited by 102
Flores Cortez, D., Waltrich, G., Fraigneaud, J., Miranda, H., & Barbi, I. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350454 · Cited by 101 · cited 1×
“Examples of these hybrid topologies include: • Forward-Flyback Converter [63]: The primary side employs a forward topology to achieve high power transfer capability, while the secondary side adopts a flyback topology to provide excellent isolation and energy storage characteristics.”
Development of a switched-capacitor DC-DC converter with bidirectional power flow
Lee, S. T. S., Hui, S. Y. R., Chow, W. C., & Chung, H. S. H. (2000) · IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications · doi:10.1109/81.883334 · Cited by 101 · cited 1×
“In this switched-capacitor-based topology, inductors are entirely omitted, thereby eliminating the efficiency limitations associated with magnetic energy storage and the high weight of traditional inductors [68].”
Analysis of dual-carrier modulator for bidirectional noninverting buck–boost converter
Aharon, I., Kuperman, A., & Shmilovitz, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2315993 · Cited by 97 · cited 1×
“Additionally, this topology often includes the option to produce a negative output voltage, which enhances its applicability in specific scenarios [43].”
New solar cell power supply system using a boost type bidirectinal DC-DC converter
Matsuo, H., & Kurokawa, F. (1984) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1984.350020 · Cited by 92 · cited 1×
“…of a high-frequency transformer provides these topologies with significant voltage gain capabilities and enhanced electrical safety, which makes them well-suited for applications requiring strict electrical isolation and high voltage gain, such as EVs and renewable energy generation systems [36].”
Jia, C., Li, K., He, H., Zhou, J., Li, J., & Wei, Z. (2023) · Energy · doi:10.1016/j.energy.2023.128462 · Cited by 89 · cited 1×
“Although emissions from cars and buses are not expected to be fully eradicated until 2070, many regions, including the European Union, the United States, China, and Japan, are projected to phase out conventional vehicles as early as 2040 [9].”
Caricchi, F., Crescimbini, F., Noia, G., & Pirolo, D. (2002) · Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94 · doi:10.1109/apec.1994.316373 · Cited by 82 · cited 1×
“While FC and power batteries predominantly supply the system’s average power demand, SC delivers peak power and instantaneous energy during dynamic transitions, such as acceleration, deceleration, and energy recuperation, to ensure a rapid system response [29].”
Hybrid DC–DC converter with phase-shift or frequency modulation for NEV battery charger
Lee, I.-O. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2477345 · Cited by 81 · cited 2×
“This method is particularly effective in reducing switching losses under light-load conditions while maintaining stable operation [102].”
Soft-switched DC/DC converter with PWM control
Oruganti, R., Heng, P. C., Guan, J. T. K., & Choy, L. A. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.654964 · Cited by 79 · cited 1×
“These methods significantly improve efficiency and reduce thermal stress on components, enabling higher power density designs [108].”
Tan, L., Zhu, N., & Wu, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2496904 · Cited by 79 · cited 1×
“In addition to reducing voltage stress, the three-level topology further improves energy conversion efficiency by minimizing switching and conduction losses [59].”
Remaining useful life prediction of PEMFC based on matrix long short-term memory
Yi, F., Shu, X., Zhou, J., Zhang, J., Feng, C., Gong, H., Zhang, C., & Yu, W. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.02.302 · Cited by 73 · cited 1×
“The scores for key metrics, such as conversion efficiency and power density, were derived from a combination of experimental results reported in the literature and standardized benchmarks for bidirectional DC-DC converters [114].”
Minimum-RMS-current operation of asymmetric dual active half-bridge converters with and without ZVS
Chakraborty, S., & Chattopadhyay, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2613874 · Cited by 72 · cited 1×
“[97] introduces a hybrid full-bridge/half-bridge topology combined with an impedance network, significantly enhancing system performance.”
Kang, T., Kim, C., Suh, Y., Park, H., Kang, B., & Kim, D. (2012) · 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2012.6165792 · Cited by 68 · cited 1×
“The bidirectional converter shown in Figure 4a employs interleaving technology, which significantly reduces current ripple at switching frequency through multiphase operation, thereby enabling the use of smaller EMI filters [50].”
Liu, Y.-C., Chen, C., Chen, K.-D., Syu, Y.-L., & Dung, N. A. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953117 · Cited by 61 · cited 2×
“Figure 6 illustrates the fundamental structure of the dual active bridge (DAB), characterized by full-bridge topologies on both sides of the high-frequency transformer [88].”
Yang, C., Song, B., Xie, Y., & Tang, X. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3067328 · Cited by 61 · cited 1×
“TPSC is especially effective in converters designed for hybrid energy storage systems [104].”
Zhao, J., Ma, Y., Zhang, Z., Wang, S., & Wang, S. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.078 · Cited by 57 · cited 2×
“Figure 1b illustrates the HESS architecture in Plug-in Hybrid Electric Vehicles (PHEV) [21].”
Non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents
Song, M.-S., Son, Y.-D., & Lee, K.-H. (2014) · Journal of Power Electronics · doi:10.6113/jpe.2014.14.4.649 · Cited by 56
Isolated switched-boost push–pull DC–DC converter for step-up applications
Gorji, S. A., Ektesabi, M., & Zheng, J. (2017) · Electronics Letters · doi:10.1049/el.2016.4151 · Cited by 54 · cited 2×
“Its topology is depicted in Figure 5b. Similar to its unidirectional counterpart, the bidirectional push-pull converter utilizes a multi-winding transformer to facilitate power transfer and conversion [70].”
High-power density design of a soft-switching high-power bidirectional DC-DC converter
Zhang, J., Kim, R.-Y., & Lai, J. (2006) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2006.1712087 · Cited by 52
A Novel Interpretable Short-Term Load Forecasting Method Based on Kolmogorov-Arnold Networks
Jiang, B., Wang, Y., Wang, Q., & Geng, H. (2024) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2024.3498452 · Cited by 50 · cited 1×
“When designing a flyback converter, special attention must be paid to transformer design to optimize performance and mitigate potential issues [76].”
Self-citationA Control Map for a Bidirectional PWM Plus Phase-Shift-Modulated Push–Pull DC–DC Converter
Li, S., Xiangli, K., & Smedley, K. M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2703674 · Cited by 49 · cited 1×
“The following sections classify and summarize the main topologies of isolated bidirectional converters, offering deeper insights into their applicability and performance characteristics across various use cases [72].”
Ma, X., Wang, P., Bi, H., & Wang, Z. (2020) · IEEE Access · doi:10.1109/access.2020.3007638 · Cited by 48 · cited 1×
“[ 95,96] propose an isolated bidirectional DC-DC converter designed with a voltage-fed half-bridge topology on the transformer’s primary side and a full-bridge topology on the secondary side.”
A bidirectional three-phase push–pull converter with dual asymmetrical PWM method
Kwon, M., Park, J., & Choi, S. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2431273 · Cited by 47 · cited 2×
“To further enhance the performance of this topology in high-power applications, reference [77] proposes a three-phase bidirectional push-pull converter.”
Zhang, Z., & Chau, K.-T. (2017) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2541163 · Cited by 47 · cited 1×
“In FCEV, as depicted in Figure 1a, the FC serves as the primary energy source, delivering the vehicle’s average power output to ensure a stable energy supply [19].”
A Holistic Feature Selection Method for Enhanced Short-term Load Forecasting of Power System
Jiang, B., Liu, Y., Geng, H., Wang, Y., Zeng, H., & Ding, J. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3219499 · Cited by 46 · cited 2×
“Similarly, the SC, also linked via a bidirectional DC-DC converter, delivers additional instantaneous power during acceleration and absorbs regenerative energy during braking, achieving highly efficient energy management [23].”
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00163-z · Cited by 42 · cited 1×
“However, due to the inherent mismatch between the output voltage of SC and the vehicle’s DC bus voltage, the converter is essential for voltage regulation, ensuring efficient energy transfer and stable system operation [30].”
Bidirectional converter for high-efficiency fuel cell powertrain
Fardoun, A. A., Ismail, E. H., Sabzali, A. J., & Al-Saffar, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.122 · Cited by 38 · cited 1×
“…cannot offer advantages like high voltage gain ratios due to the absence of a transformer, it is relatively simple in design, lightweight in topology, and avoids common issues such as magnetic interference and the additional weight and volume introduced by transformers in isolated systems [35].”
Yang, C., Song, B., Xie, Y., Zheng, S., & Tang, X. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3239609 · Cited by 37 · cited 1×
“This innovation was later successfully applied to bidirectional ´Cuk converters, which significantly minimizes the impact of current ripple while improving overall EMI performance [46].”
Niu, S., Zhao, Q., Niu, S., & Jian, L. (2024) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2024.3417244 · Cited by 36 · cited 1×
“This design renders the converter lighter and more suitable for applications requiring high power density [69].”
Tuluhong, A., Xu, Z., Chang, Q., & Song, T. (2025) · Electronics · doi:10.3390/electronics14020389 · Cited by 35 · cited 1×
“Figure 3d illustrates the topology of the bidirectional SEPIC/Zeta DC-DC converter [48].”
Topologies of bidirectional PWM dc-dc power converters
Kazimierczuk, M. K., Vuong, D. Q., Nguyen, B. T., & Weimer, J. A. (2002) · Proceedings of the IEEE 1993 National Aerospace and Electronics Conference-NAECON 1993 · doi:10.1109/naecon.1993.290953 · Cited by 33 · cited 2×
“The same design principles have also been applied to develop isolated versions of bidirectional SEPIC and Zeta converters [73].”
Niu, S., Lyu, R., Lyu, J., Chau, K. T., Liu, W., & Jian, L. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3481247 · Cited by 33 · cited 1×
“The power battery, connected to the DC bus via a bidirectional DC-DC converter, not only ensures a steady energy supply but also facilitates energy recuperation during braking and deceleration, thereby improving overall energy efficiency [22].”
Niu, S., Zhao, Q., Chen, H., Niu, S., & Jian, L. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3292870 · Cited by 31 · cited 1×
“While a large number of switches may lead to higher switching losses, the use of low-loss silicon carbide (SiC) [89] or gallium nitride (GaN) power switches [90] can effectively mitigate these losses and enhance overall system efficiency.”
Bidirectional Current-Fed Flyback-Push-Pull DC-DC Converter
de Souza, E. V., & Barbi, I. (2011) · XI Brazilian Power Electronics Conference · doi:10.1109/cobep.2011.6085171 · Cited by 30 · cited 1×
“In [83], further optimization of the bidirectional forward DC-DC converter was explored [84].”
Performance evaluation of the isolated bidirectional Cuk converter with integrated magnetics
Aboulnaga, A. A., & Emadi, A. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1355657 · Cited by 30 · cited 1×
“Based on the operating principles of the non-isolated bidirectional ´Cuk converter, a new isolated bidirectional ´Cuk converter has been introduced, successfully incorporating magnetic isolation advantages into the original design [78].”
Yang, C., Song, B., Xie, Y., Lu, S., & Tang, X. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3111122 · Cited by 29 · cited 1×
“By generating optimal switching patterns, SVM reduces harmonic distortion and enhances the overall efficiency of the converter, particularly in high-frequency applications [109].”
Niu, S., Niu, S., Zhang, C., & Jian, L. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3150114 · Cited by 28 · cited 1×
“While a large number of switches may lead to higher switching losses, the use of low-loss silicon carbide (SiC) [89] or gallium nitride (GaN) power switches [90] can effectively mitigate these losses and enhance overall system efficiency.”
Modeling and analysis of solar-powered electric vehicles
Nivas, M., Naidu, R. K. P. R., Mishra, D. P., et al. (2022) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v13.i1.pp480-487 · Cited by 27
Forward-type resonant bidirectional DC–DC converter
Khodabakhshian, M., Adib, E., & Farzanehfard, H. (2016) · IET Power Electronics · doi:10.1049/iet-pel.2015.0975 · Cited by 26 · cited 1×
“This converter utilizes the forward structure to enable bidirectional power flow [81].”
Li, X., & Bhat, A. K. S. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4591932 · Cited by 26
Jia, C., He, H., Zhou, J., Li, J., Wei, Z., & Li, K. (2023) · Energy · doi:10.1016/j.energy.2023.128928 · Cited by 25 · cited 1×
“These coupled designs further reduce current ripple while improving dynamic response and efficiency [55].”
A novel design and feasibility analysis of a fuel cell plug-in hybrid electric vehicle
Wu, D. X., & Williamson, S. S. (2008) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2008.4677706 · Cited by 21 · cited 1×
“Conversely, vehicle load components, such as motor controllers and DC-DC converters, have strict voltage input requirements, and excessive voltage fluctuations can compromise performance [32].”
Isolated Zeta-SEPIC bidirectional dc-dc converter with active-clamping
Ruseler, A., & Barbi, I. (2013) · 2013 Brazilian Power Electronics Conference · doi:10.1109/cobep.2013.6785104 · Cited by 19 · cited 1×
“Furthermore, the coupled inductor design improves the system’s power density and dynamic performance, making the converter even more appealing for applications that demand high reliability and efficiency [79].”
Analysis and implementation of a bidirectional ZVS dc-dc converter with active clamp
Lin, B.-R., Chen, J.-J., Lee, Y.-E., & Chiang, H.-K. (2008) · 2008 3rd IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2008.4582544 · Cited by 19
Niu, S., Zhao, Q., Chen, H., Yu, H., Niu, S., & Jian, L. (2022) · Energies · doi:10.3390/en15249529 · Cited by 19
A real-time prediction method for PEMFC life under actual operating conditions
Zhou, J., Zhang, J., Yi, F., Feng, C., Wu, G., Li, Y., Zhang, C., & Wang, C. (2024) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2024.103949 · Cited by 19
Xu, X., Khambadkone, A. M., & Oruganti, R. (2007) · IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2007.4460246 · Cited by 18 · cited 1×
“Figure 8a depicts a dual half-bridge topology for bidirectional isolated converters, with voltage-fed half-bridge structures on both sides of the transformer [91,92].”
Lin, J., Yang, X., Niu, S., Yu, H., Zhong, J., & Jian, L. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118480 · Cited by 16 · cited 1×
“Increasing power density often involves raising the switching frequency and reducing passive component sizes [111].”
Soft-switched DC/DC converter with PWM control
Oruganti, R., Heng, P. C., Tan, K. G. J., & Liew, A. C. (2005) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.1993.388500 · Cited by 16
Kumar, A., Bhat, A. H., & Agarwal, P. (2017) · 2017 Recent Developments in Control, Automation & Power Engineering (RDCAPE) · doi:10.1109/rdcape.2017.8358301 · Cited by 14 · cited 2×
“Isolated bidirectional converters, in this context, have become an ideal solution for energy conversion in EVs [61].”
A novel high‐conversion‐ratio bidirectional three‐phase DC–DC converter
Wang, F., Wang, Y., Zhang, F., & Teng, C. (2019) · The Journal of Engineering · doi:10.1049/joe.2018.8782 · Cited by 14 · cited 2×
“Conversion efficiency measures the ratio of output power to input power and reflects how effectively the converter utilizes energy [62].”
A new isolated bidirectional buck-boost PWM converter
Delshad, M., & Farzanehfard, H. (2010) · 2010 1st Power Electronic & Drive Systems & Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2010.5471860 · Cited by 11 · cited 2×
“Reference [75] further explores this topology, proposing various modifications to improve its voltage gain, thereby expanding its applicability in scenarios requiring electrical isolation and high voltage gain.”
Yang, C., Song, B., Jatskevich, J., Zhang, H., & Lee, C. H. T. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2023.3345471 · Cited by 9 · cited 1×
“Excessively high voltage stress increases the risk of device failure and necessitates the use of higher-rated, larger, and more expensive components, which could compromise system compactness and cost-effectiveness [110].”
A novel non-isolated bidirectional DC-DC converter for high voltage gain applications
Reddy, S. R. P., Naik, B. S., & Umanand, L. (2017) · 2017 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2017.8308944 · Cited by 8 · cited 1×
“• Flyback-Push-Pull Converter [86]: The primary side uses a flyback topology to achieve isolation and energy storage, while the secondary side employs a push-pull topology to improve system efficiency and power transfer capability.”
A REVIEW: BI-DIRECTIONAL DC-DC CONVERTER TOPOLOGIES
Sharma, P., Palwalia, D. K., & Sharma, A. K. (2024) · International Journal of Technical Research & Science · doi:10.30780/specialissue-iset-2024/029 · Cited by 4 · cited 1×
“This is particularly critical in fields such as EVs and energy storage systems, where stringent demands for efficient energy management prevail [47].”
Three-stage type gate voltage drive circuit to reduce turn-off voltage overshoot and ring in MOSFET
Qi, L. (2013) · Dianji yu kongzhi xuebao · Cited by 3
Jiang, B., Li, Y., Wang, Q., et al. (2025) · doi:10.36227/techrxiv.172676826.67820105/v2
Self-citationVoltage loop of boost PWM DC-DC converters with peak current-mode control
Bryant, B., & Kazimierczuk, M. K. (2006) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.854611
Lin, J., Yang, X., Niu, S., et al. (2024) · doi:10.2139/ssrn.4743186
A magnetic-less DC-DC converter for dual voltage automotive systems
Peng, F. Z., Zhang, F., & Qian, Z. (n.d.) · Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344) · doi:10.1109/ias.2002.1042726
Cited by
Taghizad-Tavana, K., Nezhad, A. E., Hagh, M. T., Canani, A., & Safari, A. (2025) · Eng—Advances in Engineering · doi:10.3390/eng6110309 · Cited by 46
“A bidirectional interface converter links the AC and DC buses, enabling controlled power exchange between them [87].”
Safety Management Technologies for Wireless Electric Vehicle Charging Systems: A Review
Niu, S., Jia, Q., Yang, H., Yang, C., & Jian, L. (2025) · Electronics · doi:10.3390/electronics14122380 · Cited by 26
Ranjbaran, P., Ebrahimi, J., Bakhshai, A., & Jain, P. K. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3625535 · Cited by 23
“To enhance the performance of HESSs in EV applications, various dual-stage architectures have been proposed and investigated [33], [34].”
Alrubaie, A. J., Salem, M., Swadi, M., Yahya, K. A., Kamarol, M., & Dawsari, S. A. A. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.11.073 · Cited by 19
“7(a) and (b) (Tong et al., 2025).”
Bridging renewable energy sources with non-isolated DC-DC converters: challenges and innovations
Mishra, S., Ahmad, R., & Srivastava, A. (2025) · Discover Electronics · doi:10.1007/s44291-025-00110-w · Cited by 10
“Similarly, in electric vehicles, bidirectional non-isolated converters facilitate regenerative braking and efficient energy transfer between the battery and motor drive [15].”
Metadata
- Authors
- Tong, Y., Salhi, I., Wang, Q., Lu, G., & Wu, S.
- Affiliations
- Hong Kong Polytechnic University (HK)
- Centre National de la Recherche Scientifique (FR)
- State Grid Corporation of China (China) (CN)
- Corresponding author
- Wang, Qin
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2025-05-01
- Volume
- 18
- Issue
- 9
- Pages
- 2312
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W4410005456
- Cited by
- 60
- References
- 117
- Citations by year
- 2026: 40 · 2025: 20
- FWCI
- 13.51
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- PolyU Institutional Research Archive (Hong Kong Polytechnic University) (publishedVersion, cc-by)
- HAL (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- State Grid Corporation of China (SGHAYJ00NNJS2400004)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- bidirectional DC-DC converter, hybrid energy storage, electric vehicles, converter topology, non-isolated converter, isolated converter, buck-boost converter, Cuk converter, interleaved converter, dual active bridge converter, push-pull converter, wide bandgap devices, voltage stress, power density, switching frequency, energy management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.