The DOI matches its Crossref record; 58 of the 62 references it cites were found in a registry or an index.
Rechargeable Energy Storage Systems for Plug-in Hybrid Electric Vehicles—Assessment of Electrical Characteristics
Open accessAbstract
In this paper, the performances of various lithium-ion chemistries for use in plug-in hybrid electric vehicles have been investigated and compared to several other rechargeable energy storage systems technologies such as lead-acid, nickel-metal hydride and electrical-double layer capacitors. The analysis has shown the beneficial properties of lithium-ion in the terms of energy density, power density and rate capabilities. Particularly, the nickel manganese cobalt oxide cathode stands out with the high energy density up to 160 Wh/kg, compared to 70–110, 90 and 71 Wh/kg for lithium iron phosphate cathode, lithium nickel cobalt aluminum cathode and, lithium titanate oxide anode battery cells, respectively. These values are considerably higher than the lead-acid (23–28 Wh/kg) and nickel-metal hydride (44–53 Wh/kg) battery technologies. The dynamic discharge performance test shows that the energy efficiency of the lithium-ion batteries is significantly higher than the lead-acid and nickel-metal hydride technologies. The efficiency varies between 86% and 98%, with the best values obtained by pouch battery cells, ahead of cylindrical and prismatic battery design concepts. Also the power capacity of lithium-ion technology is superior compared to other technologies. The power density is in the range of 300–2400 W/kg against 200–400 and 90–120 W/kg for lead-acid and nickel-metal hydride, respectively. However, considering the influence of energy efficiency, the power density is in the…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Values of k, according to the authors of [41], in the case of Li-ion batteries, typically vary in the range of 1.0-1.08.”
From Effect of Ambient Temperature on Electric Vehicles’ Energy Consumption and Range: Model Definition and Sensitivity Analysis Based on Nissan Leaf Data (2019) · cites this paper as [41]
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,935
Principles and applications of electrochemical capacitors
Kötz, R., & Carlen, M. W. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00354-6 · Cited by 4,812
Progress in electrical energy storage system: a critical review
Chen, H., Cong, T. N., Yang, W., Tan, C., Li, Y., & Ding, Y. (2009) · Progress in Natural Science · doi:10.1016/j.pnsc.2008.07.014 · Cited by 3,746
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10 · Cited by 2,967
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,640
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,602
CoO2, The End Member of the Li x CoO2 Solid Solution
Amatucci, G. G., Tarascon, J., & Klein, L. C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836594 · Cited by 1,034
R&D considerations for the performance and application of electrochemical capacitors
Burke, A. F. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.01.011 · Cited by 1,002
Emadi, A., Rajashekara, K., Williamson, S. S., & Lukic, S. M. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2005.847445 · Cited by 735
Recent developments in lithium ion batteries
Wakihara, M. (2001) · Materials Science and Engineering R Reports · doi:10.1016/s0927-796x(01)00030-4 · Cited by 719
Energy Technology Perspectives 2008: Scenarios and Strategies to 2050
International Energy Agency (2008) · Energy technology perspectives · doi:10.1787/9789264041431-en · Cited by 677
Structure and electrochemistry of the spinel oxides LiTi2O4 and Li43Ti53O4
Colbow, K., Dahn, J. R., & Haering, R. R. (1989) · Journal of Power Sources · doi:10.1016/0378-7753(89)80152-1 · Cited by 613
Cobalt dissolution in LiCoO2-based non-aqueous rechargeable batteries
Amatucci, G. G. (1996) · Solid State Ionics · doi:10.1016/0167-2738(95)00231-6 · Cited by 597
Passive and active battery balancing comparison based on MATLAB simulation
Daowd, M. A. A. H., Omar, N., den Bossche, P. V., & Mierlo, J. V. (2011) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2011.6043010 · Cited by 468
Self-citationAn overview of positive-electrode materials for advanced lithium-ion batteries
Ohzuku, T., & Brodd, R. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.154 · Cited by 415
Nanostructured Carbons: Double-Layer Capacitance and More
Simon, P., & Burke, A. F. (2008) · The Electrochemical Society Interface · doi:10.1149/2.f05081if · Cited by 324
SUBAT: An assessment of sustainable battery technology
den Bossche, P. V., Frédéric, V., Mierlo, J. V., Matheys, J., & Autenboer, W. V. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.039 · Cited by 284
Self-citationSafety characteristics of Li(Ni0.8Co0.15Al0.05)O2 and Li(Ni1/3Co1/3Mn1/3)O2
Belharouak, I., Lu, W., Vissers, D. R., & Amine, K. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.12.007 · Cited by 268
Failure mechanism of Li-ion battery at overcharge conditions
Belov, D. G., & Yang, M. (2007) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0449-3 · Cited by 245
Electric powertrains : opportunities and challenges in the US light-duty vehicle fleet
Kromer, M. A. (2007) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 238
Lu, S., Corzine, K. A., & Ferdowsi, M. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896971 · Cited by 222
Aging of lithium-ion batteries
Sarre, G., Blanchard, P., & Broussely, M. (2003) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.008 · Cited by 215
Ultracapacitor technologies and application in hybrid and electric vehicles
Burke, A. F. (2009) · International Journal of Energy Research · doi:10.1002/er.1654 · Cited by 194
Batteries for Plug-in Hybrid Electric Vehicles (PHEVs): Goals and the State of Technology circa 2008Preprint
Axsen, J., Burke, A., & Kurani, K. S. (2008) · RePEc: Research Papers in Economics · Cited by 138
Income and distance elasticities of values of travel time savings: New Swiss results
Axhausen, K. W., Hess, S., König, A., Abay, G., Bates, J. J., & Bierlaire, M. (2008) · Transport Policy · doi:10.1016/j.tranpol.2008.02.001 · Cited by 136
Are batteries ready for plug-in hybrid buyers?
Axsen, J., Kurani, K. S., & Burke, A. F. (2010) · Transport Policy · doi:10.1016/j.tranpol.2010.01.004 · Cited by 127
IEC 61851-1: Electric vehicle conductive charging system - Part 1: General requirements
den Bossche, P. V. (2010) · Cited by 126
Self-citationBattery Requirements for Plug-In Hybrid Electric Vehicles -- Analysis and Rationale
Pesaran, A. A., Markel, T., Tataria, H., & Howell, D. R. (2009) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 119
Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO2
Liu, H., Yang, Y., & Zhang, J. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.083 · Cited by 118
Investigation of the kinetic mechanism in overcharge process for Li-ion battery
Belov, D. G., & Yang, M. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.04.031 · Cited by 114
Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test
Doh, C., Kim, D.-H., Kim, H.-S., Shin, H.-M., Jeong, Y., Moon, S., Jin, B., Eom, S.-W., Kim, H., Kim, K.-W., et al. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.102 · Cited by 104
Synthesis of electrochemically active LiCoO2 and LiNiO2 at 100 °C
Amatucci, G. G. (1996) · Solid State Ionics · doi:10.1016/0167-2738(96)00031-8 · Cited by 95
Omar, N., Mierlo, J. V., Verbrugge, B., & den Bossche, P. V. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.03.039 · Cited by 94
Self-citationTakahashi, Y., Tode, S., Kinoshita, A., Fujimoto, H., Nakane, I., & Fujitani, S. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2916685 · Cited by 89
Omar, N., Daowd, M. A. A. H., Hegazy, O., Mulder, G., Timmermans, J.-M., Coosemans, T., den Bossche, P. V., & Mierlo, J. V. (2012) · Energies · doi:10.3390/en5010138 · Cited by 80
Self-citationBurke, A. F., & Miller, M. (2009) · RePEc: Research Papers in Economics · Cited by 78
Omar, N., den Bossche, P. V., Mulder, G., Daowd, M. A. A. H., Timmermans, J.-M., Mierlo, J. V., & Pauwels, S. (2011) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2011.6043017 · Cited by 65
Self-citationOmar, N., Verbrugge, B., Mulder, G., den Bossche, P. V., Mierlo, J. V., Daowd, M. A. A. H., Dhaens, M., & Pauwels, S. (2010) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2010.5729083 · Cited by 61
Self-citationMierlo, J. V., Vereecken, L., Maggetto, G., Favrel, V., Meyer, S., & Hecq, W. (2003) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1243/095440703322114960 · Cited by 48
Self-citationBATTERIES FOR ELECTRIC VEHICLES
Rand, D., & Woods, R. (1981) · Cited by 45
Enhanced test methods to characterise automotive battery cells
Mulder, G., Omar, N., Pauwels, S., Leemans, F., Verbrugge, B., Nijs, W. D., den Bossche, P. V., Six, D., & Mierlo, J. V. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.072 · Cited by 42
Self-citationTesting of lithium-ion 18650 cells and characterizing/predicting cell performance
Fellner, J. P., Loeber, G. J., & Sandhu, S. S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00238-9 · Cited by 38
Cheng, Y., Mierlo, J. V., den Bossche, P. V., & Lataire, P. (2006) · IET International Conference on Power Electronics, Machines and Drives (PEMD) · doi:10.1049/cp:20060140 · Cited by 28
Self-citationOmar, N., Daowd, M. A. A. H., Mierlo, J. V., den Bossche, P. V., Verbrugge, B., Mulder, G., & Pauwels, S. (2010) · VUBIR (Vrije Universiteit Brussel) · Cited by 28
Self-citationAmriou, T., Khelifa, B., Aourag, H., Aouadi, S., & Mathieu, C. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.01.061 · Cited by 28
An extended PNGV battery model for electric and hybrid vehicles
Daowd, M. A. A. H. (2011) · VUBIR (Vrije Universiteit Brussel) · Cited by 21
Self-citationAssessment of Behaviour of Super Capacitor-battery System in Heavy Hybrid Lift Truck Vehicles
Omar, N., Mierlo, J. V., Mulders, F. V., & den Bossche, P. V. (2009) · Journal of Asian Electric Vehicles · doi:10.4130/jaev.7.1277 · Cited by 18
Self-citation(2010) · Cited by 18
Kharkats, Y. I., Sokirko, A. V., & Bark, F. H. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(94)00223-n · Cited by 17
Kida, Y., Kinoshita, A., Yanagida, K., Funahashi, A., Nohma, T., & Yonezu, I. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00019-1 · Cited by 13
Anode Materials for Lithium-ion Batteries
Huang, H.-X. (1999) · Research Repository (Delft University of Technology) · Cited by 10
Verbrugge, B., Heremans, Y., Mulders, F. V., Culcu, H., den Bossche, P. V., & Mierlo, J. V. (2009) · World Electric Vehicle Journal · doi:10.3390/wevj3040803 · Cited by 7
Self-citationAdvanced Lead-Acid Batteries – the Way forward for Low-Cost Micro and Mild Hybrid Vehicles
Cooper, A. G., & Moseley, P. (2009) · World Electric Vehicle Journal · doi:10.3390/wevj3010061 · Cited by 6
Peak Power based Fuel Cell Hybrid Propulsion System
Mierlo, J. V., Timmermans, J.-M., Maggetto, G., & den Bossche, P. V. (2008) · World Electric Vehicle Journal · doi:10.3390/wevj1010054 · Cited by 5
Self-citationMancini, M. (2009) · Unicam Scientific Publications (University of Camerino) · Cited by 5
A Balancing and Monitoring System for Battery Cell Stacks in Electrical Vehicles
Ershag, O. (2008) · Diva portal (Dalarna University Library) · Cited by 5
LIQUID ELECTROLYTE SYSTEMS FOR ADVANCED LITHIUM BATTERIES
Wenige, R., Niemann, M. U., Heider, U., Jungnitz, M., & Hilarius, V. (1997) · 한국공업화학회 심포지움집 · Cited by 4
Trends and Development Status of IEC Global Electric Vehicle Standards
den Bossche, P. V., Omar, N., & Mierlo, J. V. (2010) · Journal of Asian Electric Vehicles · doi:10.4130/jaev.8.1409 · Cited by 3
Self-citation
Research works printed but not linked: 15
- Boureima, F.S. (2011). Environmental Assessment of Conventional and Alternative Vehicles and Fuels in a Belgian Context. [Ph.D. Thesis, Vrije Universiteit Brussel].
- Lindenmaier, J., Stiegeler, M., and Kabza, H. (, January May). Charge/Discharge Load Reduction of Lead Acid Batteries in Micro-Hybrid Vehicles Using Ultra-Capacitor Assistance. Proceedings of the 24th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Stavanger, Norway.
- Omar, N., Al Sakka, M., Daowd, M., Coosemans, Th., Van Mierlo, J., and Van den Bossche, P. (2010, January 21–22). Assessment of hebavior of Active EDLC-Battery system in Heavy Hybrid Charge Depleting Vehicles. Proceedings of the 4th European Symposium on Super Capacitors & Applications, Bordeaux, France.
- Abderrahmane, H., and Emmanuel, B. (, 2008). Assessment of Real Behavior of VHE Energy Storage System in Heavy Vehicles. Proceedings of EET-2008 European Ele-Drive Conference, Geneva, Switzerland.
- Peseran, A. (, January February). Battery Choices and Potential Requirements for Plug-In Hybrids. Proceedings Plug-In Hybrid Electric Truck Workshop, Los Angeles, CA, USA.
- Nelson, P., and Amine, Kh. (, January December). Advanced Lithium-Ion Batteries for Plug-in Hybrid-Electric Vehicles. Proceedings the 23th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Anaheim, CA, USA.
- Pesaran, A. (, January December). Battery Requirement for Plug-In Hybrid Electric Vehicles—Analysis and Rationale. Proceedings the 23th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Anaheim, CA, USA.
- Rand, D.A.J., Woods, R., and Dell, R.M. (1998). Batteries for Electric Vehicles, John Wiley & Sons.
- Ong, Sh.P. (2011). First Principle Design and Investigation of Lithium-Ion Battery Cathodes and Electrolytes. [Ph.D. Thesis, Massachusetts Institute of Technology].
- Broussely, M., and Archdale, G. (, January September). Li-ion Batteries and Portable Power Source Prospects for the Next Five to Ten Years. Proceedings of the 23rd International Power Sources Symposium, Amsterdam, The Netherlands.
- Peukert, 1897, Über die Abhänigkeit der Kapazität von der Entladestromstärke bei Bleiakkumulatoren, Elektrotechnische Zeitschrift, 27, 287
- Szczepanek, A., and Botsford, C. (, January May). Electric Vehicle Infrastructure Development: An Enabler for Electric Vehicle Adoption. Proceedings the 24th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Stavanger, Norway.
- Van den Bossche, P., Verbrugge, B., Omar, N., and Van Mierlo, J. (, January September). The Electric Vehicle Charged by the Grid: Voltages and Power Levels. Proceedings of the Plug in Hybrid and Electric Vehicles Conference (PHEV-09), Montréal, Canada.
- Sawai, 2005, Impedance on Lithium-Ion Battery Consisting of Li(Li1/3Ti5/3)O4 and LiCO1/2Ni1/2O2, J. Electrochem., 51, 1651
- Nazri, G.B., and Pistoia, G. (2009). Lithium Batteries, Springer.
Cited by
Sorted by citations
Critical review of state of health estimation methods of Li-ion batteries for real applications
Berecibar, M., Gandiaga, I., Villarreal, I., Omar, N., Van Mierlo, J., & Van den Bossche, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.042 · Cited by 1,126
Self-citationOmar, N., Monem, M. A., Firouz, Y., Salminen, J. P., Smekens, J., Hegazy, O., Gualous, H., Mulder, G., den Bossche, P. V., Coosemans, T., et al. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.09.003 · Cited by 742
Self-citationA Comprehensive Review on Supercapacitor Applications and Developments
Şahin, M., Blaabjerg, F., & Sangwongwanich, A. (2022) · Energies · doi:10.3390/en15030674 · Cited by 679
Kim, H. J., Choi, S., Lee, S. J., Seo, M. W., Lee, J. G., Deniz, E., Lee, Y. J., Kim, E. K., & Choi, J. W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03776 · Cited by 553
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 529
Metadata
- Authors
- Omar, N., Daowd, M., Bossche, P. V. D., Hegazy, O., Smekens, J., Coosemans, T., & Mierlo, J. V.
- Affiliations
- Vrije Universiteit Brussel (BE)
- Erasmus University College, Nijverheidskaai 170, Brussel, 1070, Belgium
- Corresponding author
- Omar, Noshin
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2012-08-10
- Volume
- 5
- Issue
- 8
- Pages
- 2952-2988
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2091847053
- Cited by
- 178
- References
- 62
- Citations by year
- 2026: 9 · 2025: 6 · 2024: 4 · 2023: 6 · 2022: 15 · 2021: 14 · 2020: 15 · 2019: 10 · 2018: 7 · 2017: 13 · 2016: 19 · 2015: 20 · 2014: 12 · 2013: 26 · 2012: 2
- FWCI
- 34.55
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- VUBIR (Vrije Universiteit Brussel) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Keywords
- lithium-ion batteries, plug-in hybrid electric vehicles, rechargeable energy storage systems, lead-acid batteries, nickel-metal hydride batteries, electric double-layer capacitors, energy density, power density, rate capability, battery charging efficiency, state of charge estimation, battery cell design, NCM cathode, LiFePO4 cathode, lithium titanate anode
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
