Microalgal Species Selection for Biodiesel Production Based on Fuel Properties Derived from Fatty Acid Profiles
Open accessThe DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
Physical and chemical properties of biodiesel are influenced by structural features of the fatty acids, such as chain length, degree of unsaturation and branching of the carbon chain. This study investigated if microalgal fatty acid profiles are suitable for biodiesel characterization and species selection through Preference Ranking Organisation Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Fatty acid methyl ester (FAME) profiles were used to calculate the likely key chemical and physical properties of the biodiesel [cetane number (CN), iodine value (IV), cold filter plugging point, density, kinematic viscosity, higher heating value] of nine microalgal species (this study) and twelve species from the literature, selected for their suitability for cultivation in subtropical climates. An equal-parameter weighted (PROMETHEE-GAIA) ranked Nannochloropsis oculata, Extubocellulus sp. and Biddulphia sp. highest; the only species meeting the EN14214 and ASTM D6751-02 biodiesel standards, except for the double bond limit in the EN14214. Chlorella vulgaris outranked N. oculata when the twelve microalgae were included. Culture growth phase (stationary) and, to a lesser extent, nutrient provision affected CN and IV values of N. oculata due to lower eicosapentaenoic acid (EPA) contents. Application of a polyunsaturated fatty acid (PUFA) weighting to saturation led to a lower ranking of species exceeding the double bond EN14214 thresholds. In summary, CN, IV, C18:3 and double bond limits were the strongest drivers in equal biodiesel parameter-weighted PROMETHEE analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 ( a ) GAIA plot of nine microalgal species from the present study and twelve from [12] showing 16 criteria (14 biodiesel properties from Table 3, total lipid and fatty acid content from Table 1) and the decision vector; and ( b ) Corresponding outranking flow. *: this study.](https://figures.cochat.ai/paper-figures/d71fa8c5858d49c38ad08ad9920f616b/microalgal-species-selection-for-biodiesel-production-based-on-fuel-properties-figure-2.png)
![Figure 3 ( a ) GAIA plot of the effect of nutrients (media L1, f/2, K) and growth phase [Logarithmic (Log), Late Logarithmic (LLog), and stationary (Stat)] on * N. oculata (present study) and from [10] biodiesel quality showing ten criteria (twelve biodiesel properties and total lipid content from Table 4) and the decision vector; and ( b ) corresponding outranking flow.](https://figures.cochat.ai/paper-figures/8a352bf52ec846e69f5aae591ce51d3e/microalgal-species-selection-for-biodiesel-production-based-on-fuel-properties-figure-3.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Increase light supplementation favors the formation of short-chain fatty acids, thus, demonstrating its role in deciding the level of fatty acid saturation (Islam et al. 2013).”
From Production of microalgae with high lipid content and their potential as sources of nutraceuticals (2023) · cites this paper as Islam et al. 2013
Experimental — accuracy not yet measuredIn the citing paper
“Nanochloropsis occulata, Extubocellulus sp. and Biddulphia sp. were found to be the only species from the studied samples, which met EN 14214 and ASTM D6751–2 diesel standards.”
From Factors Affecting Microalgae Production for Biofuels and the Potentials of Chemometric Methods in Assessing and Optimizing Productivity (2019) · cites this paper as [115]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A SIMPLE METHOD FOR THE ISOLATION AND PURIFICATION OF TOTAL LIPIDES FROM ANIMAL TISSUES
Folch, J., Lees, M., & Stanley, G. H. S. (1957) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)64849-5 · Cited by 65,189
Chisti, Y. (2007) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.02.001 · Cited by 9,524 · cited 1×
“In fact, producing biodiesel from microalgae may be the only way to produce sufficient automotive fuel to replace current petro-diesel usage [7].”
BackgroundBrennan, L., & Owende, P. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.009 · Cited by 4,894 · cited 1×
“Furthermore, unlike most vegetable oil sources currently used for biodiesel production, algae can be grown on non-arable land with different streams of wastewater and do not compete with the agricultural production of food crops [8].”
BackgroundMultiple Criteria Decision Analysis: State of the Art Surveys
Figueira, J., Greco, S., & Ehrogott, M. (2005) · International Series in Operations Research & Management Science · doi:10.1007/b100605 · Cited by 4,491
Second Generation Biofuels: High-Efficiency Microalgae for Biodiesel Production
Schenk, P. M., Thomas-Hall, S. R., Stephens, E., Marx, U. C., Mussgnug, J. H., Posten, C., Kruse, O., & Hankamer, B. (2008) · BioEnergy Research · doi:10.1007/s12155-008-9008-8 · Cited by 2,333
Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters
Knothe, G. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2004.11.002 · Cited by 2,329 · cited 1×
“There are, however, other parameters which also define the oxidation stability of the fuel, for example natural anti-oxidant and free fatty acid content [18,36,37].”
BackgroundReview of biodiesel composition, properties, and specifications
Hoekman, S. K., Broch, A., Robbins, C., Ceniceros, E., & Natarajan, M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.143 · Cited by 2,010 · cited 4×
“There are, however, other parameters which also define the oxidation stability of the fuel, for example natural anti-oxidant and free fatty acid content [18,36,37].”
BackgroundInfluentialInfluence of fatty acid composition of raw materials on biodiesel properties
Ramos, M. J., Fernández, C. M., Casas, A., Rodríguez, L., & Pérez, Á. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.06.039 · Cited by 1,864 · cited 5×
“Fuel properties were calculated directly from FAME profiles [14,15,25,26].”
BackgroundMethodInfluentialLiang, Y., Sarkany, N., & Cui, Y. (2009) · Biotechnology Letters · doi:10.1007/s10529-009-9975-7 · Cited by 1,059 · cited 1×
“However, except for Chlorella vulgaris, a species that is incredibly difficult to extract [47], industrial-scale production has not yet been performed with any of the higher ranked species.”
BackgroundMEDIA FOR THE CULTURE OF OCEANIC ULTRAPHYTOPLANKTON1,2
Keller, M. D., Selvin, R. C., Claus, W., & Guillard, R. R. L. (1987) · Journal of Phycology · doi:10.1111/j.1529-8817.1987.tb04217.x · Cited by 1,038 · cited 1×
“Even though growth phase clearly was a major factor affecting total lipid content, fertilization regime also had an effect, as the second highest total lipid content was observed in K medium-raised cultures, which could be due to supplementation of this medium with organic phosphate [33].”
BackgroundKumar Tiwari, A., Kumar, A., & Raheman, H. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2007.03.003 · Cited by 894 · cited 6×
“:3) contains two bis-allylic groups and a limit of 12 wt% for this FAME has been set in the European B100 biodiesel standard (EN 14214), which also limits the amount of FAMEs with four or more double bonds to 1 wt%, while the ASTM D6751-02 contains no such restrictions [19].”
BackgroundInfluentialTentative guidelines to help choosing an appropriate MCDA method
Guitouni, A., & Martel, J.-M. (1998) · European Journal of Operational Research · doi:10.1016/s0377-2217(98)00073-3 · Cited by 880 · cited 1×
“A variety of multi-criteria decision analyses (MCDA) are available ranging from elementary to rather complex methods [28], such as ELECTRE, PROMETHEE and REGIME.”
MethodRamírez-Verduzco, L. F., Rodríguez-Rodríguez, J. E., & Jaramillo-Jacob, A. D. R. (2012) · Fuel · doi:10.1016/j.fuel.2011.06.070 · Cited by 717
Improving biodiesel fuel properties by modifying fatty ester composition
Knothe, G. (2009) · Energy & Environmental Science · doi:10.1039/b903941d · Cited by 701 · cited 1×
“The most common fatty acids of microalgae are Palmitic-(hexadecanoic-C16:0), Stearic-(octadecanoic-C18:0), Oleic (octadecenoic-C18:1), Linoleic-(octadecadienoic-C18:2) and Linolenic-(octadecatrienoic-C18:3) acids [34].”
BackgroundDiesel fuel from vegetable oils: Status and opportunities
Shay, E. G. (1993) · Biomass and Bioenergy · doi:10.1016/0961-9534(93)90080-n · Cited by 540 · cited 3×
“, some are freshwater strains while others tolerate brackish or even hypersaline conditions) [9], they are an attractive resource for liquid fuel production [6].”
BackgroundBiodiesel Fuel Production from Algae as Renewable Energy
Hossain, A. B. M. S., Salleh, A., Boyce, A. N., chowdhury, P., & Naqiuddin, M. (2008) · American Journal of Biochemistry and Biotechnology · doi:10.3844/ajbbsp.2008.250.254 · Cited by 534 · cited 1×
“Algae have recently received a lot of attention as a new biomass source for the production of renewable energy in the form of biodiesel and as a feedstock for other types of fuel [1, 2].”
BackgroundNascimento, I. A., Marques, S. S. I., Cabanelas, I. T. D., Pereira, S. A., Druzian, J. I., de Souza, C. O., Vich, D. V., de Carvalho, G. C., & Nascimento, M. A. (2013) · BioEnergy Research · doi:10.1007/s12155-012-9222-2 · Cited by 517 · cited 10×
“5 Twelve species from [12]: Ankistrodesmus falcatus LC 25 ± 2 165 17.”
BackgroundMethodInfluentialThe PROMCALC & GAIA decision support system for multicriteria decision aid
Brans, J.-P., & Mareschal, B. (1994) · Decision Support Systems · doi:10.1016/0167-9236(94)90048-5 · Cited by 491
Huerlimann, R., de Nys, R., & Heimann, K. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22809 · Cited by 413 · cited 13×
“oculata (this study) were comparable to those published by [10], MUFA contents were ~10% higher and PUFA contents were 50% lower for N.”
BackgroundMethodResultSelf-citationZhu, L., Cheung, C. S., Zhang, W. G., & Huang, Z. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.024 · Cited by 399 · cited 1×
“CN is one of the most significant indicators for determining combustion behavior of diesel [41].”
BackgroundA simple method for estimation of cetane index of vegetable oil methyl esters
Krisnangkura, K. (1986) · Journal of the American Oil Chemists' Society · doi:10.1007/bf02645752 · Cited by 379 · cited 5×
“Fuel properties were calculated directly from FAME profiles [14,15,25,26].”
BackgroundMethodInfluentialDensities and Viscosities of Fatty Acid Methyl and Ethyl Esters
Pratas, M. J., Freitas, S., Oliveira, M. B., Monteiro, S. C., Lima, A. S., & Coutinho, J. A. P. (2010) · Journal of Chemical & Engineering Data · doi:10.1021/je100042c · Cited by 355 · cited 1×
“On the other hand, υ, CFPP and ρ are largely influenced by the degree of unsaturation [39,40].”
BackgroundBlending effects of biodiesels on oxidation stability and low temperature flow properties
Park, J.-Y., Kim, D.-K., Lee, J.-P., Park, S.-C., Kim, Y.-J., & Lee, J.-S. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.02.017 · Cited by 349 · cited 7×
“biodiesel properties in principal component analyses and additionally calculated the predictive oxidative stability as per [20] to evaluate the suitability of the microalgal FAME profiles.”
BackgroundMethodInfluentialPredicting the viscosity of biodiesel fuels from their fatty acid ester composition
Allen, C. A. W., Watts, K. C., Ackman, R. G., & Pegg, M. J. (1999) · Fuel · doi:10.1016/s0016-2361(99)00059-9 · Cited by 349 · cited 1×
“An empirical correlation of saturated and unsaturated FAMEs was proposed for estimating viscosity [17].”
MethodGosch, B. J., Magnusson, M., Paul, N. A., & de Nys, R. (2012) · GCB Bioenergy · doi:10.1111/j.1757-1707.2012.01175.x · Cited by 224 · cited 1×
“FAME analysis was carried out as per [23] in scan-mode on an Agilent 7890 GC equipped with a flame ionization detector (FID) and connected to an Agilent 5975C electron ionisation (EI) turbo mass spectrometer (Agilent Technologies Australia Pty Ltd.”
MethodSelf-citationSurvey of seed oils for use as diesel fuels
Kalayasiri, P., Jeyashoke, N., & Krisnangkura, K. (1996) · Journal of the American Oil Chemists' Society · doi:10.1007/bf02523921 · Cited by 207 · cited 1×
“The saponification value (SV) in mg KOHg and IV in g I2100g of fat are predicted by the following equations [27]: = (560 × ) h h (2) = (254 × × ) h h (3)”
BackgroundMicroalgae for a macroenergy world
Oncel, S. S. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.059 · Cited by 204 · cited 1×
“Algae have recently received a lot of attention as a new biomass source for the production of renewable energy in the form of biodiesel and as a feedstock for other types of fuel [1,2].”
BackgroundRelating the cetane number of biodiesel fuels to their fatty acid composition: A critical study
Gopinath, A., Puhan, S., & Nagarajan, G. (2009) · Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering · doi:10.1243/09544070jauto950 · Cited by 165 · cited 12×
“Estimated oxidation stability, IV, PUFA, CN, DU and organic carbon provision were highly correlated with the decision vector, while total lipid, SFA had little or no effect and Db ≥ 4 MUFA and LCSF were anti correlated (Figure 3a).”
BackgroundInfluentialLapuerta, M., Rodríguez‐Fernández, J., & de Mora, E. F. (2009) · Energy Policy · doi:10.1016/j.enpol.2009.05.049 · Cited by 158 · cited 1×
“There are, however, other parameters which also define the oxidation stability of the fuel, for example natural anti-oxidant and free fatty acid content [18,36,37].”
BackgroundBiodiesel- Quality, Emissions and By-Products
Montero, G., & Stoytcheva, M. (2011) · InTech eBooks · doi:10.5772/2284 · Cited by 146 · cited 2×
“Oxidative stability is influenced by the age of the biodiesel, the condition of storage and the degree of unsaturation of biodiesel FAMEs and can be improved by the addition of antioxidants [19].”
BackgroundHydrotreated Vegetable Oil as Fuel for Heavy Duty Diesel Engines
Kuronen, M. A., Mikkonen, S., Aakko-Saksa, P. T., & Murtonen, T. T. (2007) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2007-01-4031 · Cited by 143
(2002) · Avances en Nutrición Acuicola · Cited by 130
NExBTL - Biodiesel Fuel of the Second Generation
Rantanen, L., Linnaila, R., Aakko, P., & Harju, T. (2005) · SAE Technical Paper Series · doi:10.4271/2005-01-3771 · Cited by 128 · cited 1×
“The disadvantages of regular biodiesel production are: energy-expensive drying of biomass is required [4], limited storage time due to oxidative instability amongst others, and the reciprocal advantage and disadvantage of the long chain polyunsaturated fatty acid (PUFA) content on the cold temperature operability [col…”
BackgroundA quantitative analysis of microalgal lipids for optimization of biodiesel and omega‐3 production
Olmstead, I. L. D., Hill, D. R. A., Dias, D. A., Jayasinghe, N. S., Callahan, D. L., Kentish, S. E., Scales, P. J., & Martin, G. J. O. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24844 · Cited by 126 · cited 1×
“, triacylglycerides (TAGs or storage fats) and membrane lipids (phosphor- and glycolipids) would yield more information regarding the suitability of current industrial processing methods for production of biodiesel using oil from these algal species [30].”
BackgroundChen, Y., Huang, B.-Y., Chiang, T.-H., & Tang, T.-C. (2011) · Fuel · doi:10.1016/j.fuel.2011.11.031 · Cited by 114 · cited 1×
“Even though lipid content and FAME profiles can be variable for the same algal strain, algal species selection remains one of the most important steps to reduce cost and time for large-scale cultivation for biodiesel production [12,13].”
BackgroundNg, J.-H., Ng, H. K., & Gan, S. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.01.028 · Cited by 110 · cited 1×
“The fuel injection system supplies fuel by volume not by mass which means denser biodiesel will be injected with greater mass in to the combustion chamber consequently affecting the stoicheometric ratio of air and fuel [43,44].”
BackgroundNegotiation support systems: A multi-criteria and multi-agent approach
Espinasse, B., Picolet, G., & Chouraqui, E. (1997) · European Journal of Operational Research · doi:10.1016/s0377-2217(97)00127-6 · Cited by 107 · cited 2×
“A decision vector that is long and not orthogonal (at right angle) to the GAIA plane is preferred for strong decision making [45].”
BackgroundImpact of fatty ester composition on low temperature properties of biodiesel–petroleum diesel blends
Moser, B. R. (2013) · Fuel · doi:10.1016/j.fuel.2013.07.075 · Cited by 86 · cited 1×
“On the other hand, υ, CFPP and ρ are largely influenced by the degree of unsaturation [39,40].”
Backgroundvon Alvensleben, N., Stookey, K., Magnusson, M., & Heimann, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0063569 · Cited by 86 · cited 1×
“This result is not surprising, as freshwater chlorophytes do not store significant amounts of lipids and most fatty acids extracted are membrane-derived [31], in contrast to marine species like Nannochloropsis oculata, diatoms and dinoflagellates.”
ResultSelf-citationPhysical properties of fatty acid methyl esters. I. density and molar volume
Gouw, T. H., & Vlugter, J. C. (1964) · Journal of the American Oil Chemists Society · doi:10.1007/bf02673494 · Cited by 84 · cited 1×
“The Smittenberg relation was used to estimate the density of saturated methyl esters at 20 °C and 40 °C [16].”
Method(2009) · Science Publishers eBooks · doi:10.1201/b10300 · Cited by 84
Cryptic Freshwater Ciliates in a Hypersaline Lagoon
Esteban, G. F., & Finlay, B. J. (2003) · Protist · doi:10.1078/143446103322454149 · Cited by 58 · cited 1×
“, some are freshwater strains while others tolerate brackish or even hypersaline conditions) [9], they are an attractive resource for liquid fuel production [6].”
BackgroundNg, J.-H., Ng, H. K., & Gan, S. (2011) · Fuel · doi:10.1016/j.fuel.2011.03.034 · Cited by 53
Estimation of cetane index for esters of fatty acids
Klopfenstein, W. E. (1982) · Journal of the American Oil Chemists Society · doi:10.1007/bf02636316 · Cited by 45 · cited 1×
“Fuel properties were calculated directly from FAME profiles [14,15,25,26].”
MethodSomersalo, S., Karunen, P., & Aro, E. (1986) · Physiologia Plantarum · doi:10.1111/j.1399-3054.1986.tb03383.x · Cited by 17 · cited 1×
“In addition to being less toxic, this solvent system (petroleum ether:MeOH [22]) was shown to yield similar total lipid content of plant tissue, and higher content of some phospholipids compared to CHCl3:MeOH.”
BackgroundBioactive Compounds: Glycerol Production, Carotenoid Production, Fatty Acids Production
Ben‐Amotz, A. (2019) · CRC Press eBooks · doi:10.1201/9780429061639-8 · Cited by 14
Cited by
The potential of microalgae in biodiesel production
Chen, J., Li, J., Dong, W., Zhang, X., Tyagi, R. D., Drogui, P., & Surampalli, R. Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.073 · Cited by 330
Deshmukh, S., Kumar, R., & Bala, K. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.03.013 · Cited by 305
Production of microalgae with high lipid content and their potential as sources of nutraceuticals
Udayan, A., Pandey, A. K., Sirohi, R., Sreekumar, N., Sang, B.-I., Sim, S. J., Kim, S. H., & Pandey, A. (2023) · Phytochemistry Reviews · doi:10.1007/s11101-021-09784-y · Cited by 302
“Increase light supplementation favors the formation of short-chain fatty acids, thus, demonstrating its role in deciding the level of fatty acid saturation (Islam et al. 2013).”
BackgroundMicroalgae Based Biorefinery Promoting Circular Bioeconomy-Techno Economic and Life-Cycle Analysis
Rajesh Banu, J., Preethi, Kavitha, S., Gunasekaran, M., & Kumar, G. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.122822 · Cited by 280
Douvartzides, S. L., Charisiou, N. D., Papageridis, K. N., & Goula, M. A. (2019) · Energies · doi:10.3390/en12050809 · Cited by 272
“The most common fatty acids of microalgae are palmitic (16:0), stearic (18:0), oleic (18:1), linoleic (18:2), linolenic (18:3) and some species may also have eicosapentaenoic acid (20:5) and docosahexaenoic acid (22:6), as shown for some microalgae species in Table 3 [41].”
Background
Metadata
- Authors
- Islam, M., Magnusson, M., Brown, R., Ayoko, G., Nabi, M., & Heimann, K.
- Affiliations
- Queensland University of Technology (AU)
- James Cook University (AU)
- Corresponding author
- Islam, Muhammad
- Heimann, Kirsten
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2013-10-29
- Volume
- 6
- Issue
- 11
- Pages
- 5676-5702
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2153480655
- Cited by
- 348
- References
- 46
- Citations by year
- 2026: 21 · 2025: 16 · 2024: 28 · 2023: 23 · 2022: 31 · 2021: 28 · 2020: 36 · 2019: 51 · 2018: 30 · 2017: 34 · 2016: 20 · 2015: 19 · 2014: 11
- FWCI
- 6.06
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- QUT ePrints (Queensland University of Technology) (submittedVersion, other-oa)
- ResearchOnline at James Cook University (James Cook University) (submittedVersion)
- QUT ePrints (Queensland University of Technology) (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Advanced Manufacturing Cooperative Research Centre
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
- Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Microbial Metabolic Engineering and Bioproduction
- Keywords
- microalgae, biodiesel, species selection, fatty acid composition, fatty acid methyl esters, cetane number, iodine value, cold filter plugging point, kinematic viscosity, higher heating value, Nannochloropsis oculata, Chlorella vulgaris, EN 14214, ASTM D6751, polyunsaturated fatty acids, nutrient supply, subtropical agriculture
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.