Fast Pyrolysis of Four Lignins from Different Isolation Processes Using Py-GC/MS
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Pyrolysis is a promising approach that is being investigated to convert lignin into higher value products including biofuels and phenolic chemicals. In this study, fast pyrolysis of four types of lignin, including milled Amur linden wood lignin (MWL), enzymatic hydrolysis corn stover lignin (EHL), wheat straw alkali lignin (AL) and wheat straw sulfonate lignin (SL), were performed using pyrolysis gas-chromatography/mass spectrometry (Py-GC/MS). Thermogravimetric analysis (TGA) showed that the four lignins exhibited widely different thermolysis behaviors. The four lignins had similar functional groups according to the FTIR analysis. Syringyl, guaiacyl and p-hydroxyphenylpropane structural units were broken down during pyrolysis. Fast pyrolysis product distributions from the four lignins depended strongly on the lignin origin and isolation process. Phenols were the most abundant pyrolysis products from MWL, EHL and AL. However, SL produced a large number of furan compounds and sulfur compounds originating from kraft pulping. The effects of pyrolysis temperature and time on the product distributions from corn stover EHL were also studied. At 350 °C, EHL pyrolysis mainly produced acids and alcohols, while phenols became the main products at higher temperature. No obvious influence of pyrolysis time was observed on EHL pyrolysis product distributions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Lin et al. investigated the effect of temperature and time on the generation of phenolic products, illustrating that the maximum yield of phenolic products can be obtained at 450 °C [152].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [152]
In the citing paper
“Lin et al. [142] discovered a similar relationship between weight loss from Py-GC-MS and TGA, which used different sample dosages and heating rates.”
From Thermal Analysis Technologies for Biomass Feedstocks: A State-of-the-Art Review (2021) · cites this paper as [142]
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 1×
“Fast pyrolysis converts biomass into gas, liquid and solid biofuels using intermediate temperatures and short residence times in the absence of oxygen [7,8].”
BackgroundSelf-citationThe Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Review of biomass pyrolysis oil properties and upgrading research
Zhang, Q., Chang, J., Wang, T., & Xu, Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.010 · Cited by 1,472
Lignin Depolymerization and Conversion: A Review of Thermochemical Methods
Pandey, M. P., & Kim, C. S. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201000270 · Cited by 1,419
Review of current and future softwood kraft lignin process chemistry
Chakar, F. S., & Ragauskas, A. J. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.016 · Cited by 1,203 · cited 1×
“It is a three-dimensional amorphous polymer consisting of methoxylated phenylpropane structures [3].”
BackgroundCharacterization of chars from pyrolysis of lignin
Sharma, R. K., Wooten, J. B., Baliga, V. L., Lin, X., Geoffrey Chan, W., & Hajaligol, M. R. (2004) · Fuel · doi:10.1016/j.fuel.2003.11.015 · Cited by 946
Self-citationProduction of monomeric phenols by thermochemical conversion of biomass: a review
Amen-Chen, C., Pakdel, H., & Roy, C. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00180-2 · Cited by 655
Studies on finely divided wood. Part 1. Extraction of lignin with neutral solvents
Björkman, A. (1956) · Svensk Papperstidning-nordisk Cellulosa · Cited by 599
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
Understanding the Fast Pyrolysis of Lignin
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201100133 · Cited by 468
Cited by
Hu, X., & Gholizadeh, M. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.01.024 · Cited by 671
Biological valorization of low molecular weight lignin
Abdelaziz, O. Y., Brink, D. P., Prothmann, J., Ravi, K., Sun, M., García-Hidalgo, J., Sandahl, M., Hulteberg, C. P., Turner, C., Lidén, G., et al. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.10.001 · Cited by 412
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
“investigated the effect of temperature and time on the generation of phenolic products, illustrating that the maximum yield of phenolic products can be obtained at 450 °C [152].”
BackgroundLeng, E., Guo, Y., Chen, J., Liu, S., E, J., & Xue, Y. (2022) · Fuel · doi:10.1016/j.fuel.2021.122102 · Cited by 286
Recent progress in the thermal and catalytic conversion of lignin
Ha, J.-M., Hwang, K.-R., Kim, Y.-M., Jae, J., Kim, K. H., Lee, H. W., Kim, J.-Y., & Park, Y.-K. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.05.034 · Cited by 210
Metadata
- Authors
- Lin, X., Sui, S., Tan, S., Pittman, C., Sun, J., & Zhang, Z.
- Affiliations
- Northeast Forestry University (CN)
- Mississippi State University (US)
- Corresponding author
- Zhang, Zhijun
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2015-06-01
- Volume
- 8
- Issue
- 6
- Pages
- 5107-5121
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W1505829748
- Cited by
- 114
- References
- 27
- Citations by year
- 2026: 12 · 2025: 13 · 2024: 10 · 2023: 13 · 2022: 9 · 2021: 10 · 2020: 14 · 2019: 14 · 2018: 6 · 2017: 7 · 2016: 5 · 2015: 1
- FWCI
- 3.15
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Mississippi State University
- Northeast Forestry University
- Ministry of Education, India
- Fundamental Research Funds for the Central Universities
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Keywords
- fast pyrolysis, lignin, alkali lignin, wheat straw, pyrolysis product distribution, phenols, furan derivatives, sulfur compounds, kraft pulping, pyrolysis temperature, pyrolysis time, biofuels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fast Pyrolysis of Four Lignins from Different Isolation Processes Using Py-GC/MS. https://app.cochat.ai/papers/10.3390/en8065107
- The paper
- Lin, X., Sui, S., Tan, S., Pittman, C., Sun, J., & Zhang, Z. (2015). Fast Pyrolysis of Four Lignins from Different Isolation Processes Using Py-GC/MS. Energies. https://doi.org/10.3390/en8065107
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.