Use of Nanoparticle Enhanced Phase Change Material for Cooling of Surface Acoustic Wave Sensor
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The use of resonators, filters, interdigital transducers (IDT) and stable sources in electronic industry is widespread today. One of the most used filters are the surface acoustic wave (SAW) type, which is mostly based on Rayleigh waves propagation on the surface. On the other hand, the use of Phase change materials (PCMs) is considered as a heat sink method in the field of thermal cooling of electronic circuits. Recent development in heat transfer is obtained by nanoparticle-enhanced PCM (NEPCM), which is a result of combining nanoparticles with PCMs. Increase of thermal conductivity of NEPCM in comparison with common PCM enhances the heat transfer rate. The aim of the current study is thermal management of SAW for the application of high frequency heating by phase change material. Melting of NEPCMs inside a rectangular cavity next to the SAW cell is used for the cooling purpose. Free convection heat transfer of a NEPCMs in an square cavity is modeled throughout the mass and momentum. Energy governing equations are solved by using the finite element method. Electrohydrodynamic (EHD) forces exist in natural convection heat transfer within the fluid part of the enclosure. The results also show that the NEPCM causes heat transfer improvement up to 10%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





![Figure 6 Comparison of the results of current method with Jamaabadi and Park [18].](https://figures.cochat.ai/paper-figures/ca6a118785cf4bf4b04355b457d53e3d/use-of-nanoparticle-enhanced-phase-change-material-for-cooling-of-surface-figure-6.png)






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Three volume fractions were tested, and an increase in NP increased heat transfer at the solid-liquid interface.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [55]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“The NePCM improved the heat transfer by up to 10% [55].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [55]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conformable surface acoustic wave biosensor for E-coli fabricated on PEN plastic film
Lamanna, L., Rizzi, F., Bhethanabotla, V. R., & De Vittorio, M. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112164 · Cited by 96 · cited 1×
“[14] found the new application of SAW in Biosensors and Bioelectronics.”
BackgroundRemoval of spoiling materials from solar panel surfaces by applying surface acoustic waves
Alagöz, S., & Apak, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.119992 · Cited by 79 · cited 1×
“The usage of SAW includes many applications, such as microfluidics [1], propulsion system [2], determining the crystallographic orientation and velocity measurements [3], phononic crystals [4], solar panels [5], etc.”
MethodThe complexity of surface acoustic wave fields used for microfluidic applications
Weser, R., Winkler, A., Weihnacht, M., Menzel, S., & Schmidt, H. (2020) · Ultrasonics · doi:10.1016/j.ultras.2020.106160 · Cited by 59 · cited 1×
“Based on the type of crystal structure of materials (such as hexagonal) or their specific properties (such as ZnO) the SAW technology can be applied in smarter way [6] and precise tools [7].”
BackgroundSurface acoustic wave-based ultraviolet photodetectors: a review
Zhang, Y., Cai, Y., Zhou, J., Xie, Y., Xu, Q., Zou, Y., Guo, S., Xu, H., Sun, C., & Liu, S. (2019) · 中国科学通报:英文版 · doi:10.1016/j.scib.2019.12.001 · Cited by 57 · cited 2×
“[8] which adequately represents the state of knowledge and clearly specifies the purpose and motivation of taking up the topic.”
BackgroundHsu, J.-C., & Lin, Y.-D. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111651 · Cited by 45 · cited 3×
“Liang, X.; Lin, B.; Liu, Z. Analysis of velocity calculation methods of laser-induced surface acoustic wave.”
MethodInfluentialAcoustofluidics along inclined surfaces based on AlN/Si Rayleigh surface acoustic waves
Wang, Y., Tao, X., Tao, R., Zhou, J. W., Zhang, Q., Chen, D., Jin, H., Dong, S., Xie, J., & Fu, Y. (2020) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2020.111967 · Cited by 42 · cited 1×
“The usage of SAW includes many applications, such as microfluidics [1], propulsion system [2], determining the crystallographic orientation and velocity measurements [3], phononic crystals [4], solar panels [5], etc.”
MethodDryburgh, P. R., Smith, R. J., Marrow, P., Lainé, S. J., Sharples, S. D., Clark, M., & Li, W. (2020) · Ultrasonics · doi:10.1016/j.ultras.2020.106171 · Cited by 35 · cited 1×
“The usage of SAW includes many applications, such as microfluidics [1], propulsion system [2], determining the crystallographic orientation and velocity measurements [3], phononic crystals [4], solar panels [5], etc.”
MethodSurface acoustic wave propulsion system with acoustic radiation force
Kong, D., Nishio, K., & Kurosawa, M. (2020) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2020.111943 · Cited by 28
Entropy Generation in Thermal Radiative Loading of Structures with Distinct Heaters
Jamalabadi, M. Y. A., Safaei, M. R., Al‐Rashed, A. A. A. A., Nguyen, T. K., & Filho, Ê. P. B. (2017) · Entropy · doi:10.3390/e19100506 · Cited by 25
Effects of brownian motion on freezing of PCM containing nanoparticles
Abdollahzadeh, J., & Park, J. (2016) · Thermal Science · doi:10.2298/tsci140413094a · Cited by 23 · cited 9×
“Comparison of the results of current method with Jamaabadi and Park [18].”
BackgroundMethodResultInfluential
Cited by
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
A review of phase change materials and heat enhancement methodologies
Saqib, M., & Andrzejczyk, R. (2022) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.467 · Cited by 54
Aziz, A., Waheed, W., Mourad, A., Abderrahmane, A., Younis, O., Abu‐Nada, E., & Alazzam, A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109579 · Cited by 45
Biosynthesis of copper nanoparticles from copper tailings ore – An approach to the ‘Bionanomining’
Wong-Pinto, L.-S., Mercado, A., Chong, G., Salazar, P., & Ordóñez, J. I. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128107 · Cited by 36
Han, W., Fu, Z., Xu, Z., Zou, H., Yue, H., Li, W., & Zhang, H. (2026) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2026.118063 · Cited by 34
Metadata
- Authors
- Abdollahzadeh Jamalabadi, M. Y.
- Affiliations
- Ship Engineering Department, School of Mechanical Engineering, Chabahar Maritime University, Chabahar 99717-56499, Iran
- Venue
- Fluids
- Publisher
- MDPI AG
- Published
- 2021-01-08
- Volume
- 6
- Issue
- 1
- Pages
- 31
- ISSN
- 2311-5521 (ISSN-L)
- OpenAlex
- W3120614422
- Cited by
- 15
- References
- 21
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 1 · 2023: 4 · 2022: 1 · 2021: 4
- FWCI
- 1.07
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Fluids (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Nanofluid Flow and Heat Transfer
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- nanoparticle-enhanced phase change materials, surface acoustic wave sensors, thermal management, heat sinks, natural convection heat transfer, electrohydrodynamic force, dielectric heating, melting, cavity enclosure, thermal conductivity enhancement, electronics cooling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.