Preparation and Evaluation of Dental Resin with Antibacterial and Radio-Opaque Functions
Open accessThe DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
In order to prepare antibacterial and radio-opaque dental resin, a methacrylate monomer named 2-Dimethyl-2-dodecyl-1-methacryloxyethyl ammonium iodine (DDMAI) with both antibacterial and radio-opaque activities was added into a 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropyl)-phenyl]propane (Bis-GMA)/methyl methacrylate (MMA) dental resin system. Degree of conversion (DC), flexural strength (FS) and modulus (FM), water sorption (WS) and solubility (WSL), antibacterial activity, and radio-opacity (ROX) of the obtained dental resin system were investigated. Bis-GMA/MMA resin system without DDMAI was used as a control. The results showed that DDMAI could endow BIS-GMA/MMA resin system with good antibacterial (p < 0.05) and radio-opaque function without influencing the DC (p > 0.05). However, incorporating DDMAI into Bis-GMA/MMA resin could reduce mechanical properties (p < 0.05) and increase WS and WSL (p < 0.05), thus further work is needed in order to optimize the resin formulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Due to the high electron density of iodine, substitution of the halogen anions in QACs with iodine as the counter ion results in radiopaque antibacterial monomers [69], [241], [242], [243], [245].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [242]
In the citing paper
“Incorporation of 5% DDMAI had no adverse effect on the conversion and flexural strength of the resin composite and provided radio-opaque and antibacterial effects.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [242]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Chemistry and Applications of Antimicrobial Polymers: A State-of-the-Art Review
Kenawy, E.-R., Worley, S. D., & Broughton, R. (2007) · Biomacromolecules · doi:10.1021/bm061150q · Cited by 1,558
Structures of Novel Antimicrobial Agents for Textiles - A Review
Simoncic, B., & Tomsic, B. (2010) · Textile Research Journal · doi:10.1177/0040517510363193 · Cited by 604
The Microbiology of Primary Dental Caries in Humans
Tanzer, J. M., Livingston, J., & Thompson, A. M. (2001) · Journal of Dental Education · doi:10.1002/j.0022-0337.2001.65.10.tb03446.x · Cited by 593 · cited 1×
“mutans has a central role in the initiation of dental caries on enamel and root surface [56].”
Antibacterial properties of resin composites and dentin bonding systems
Imazato, S. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00102-1 · Cited by 447 · cited 1×
“Studies showed that MDPB containing dental restorative materials had the advantages of long-lasting antibacterial activity and uncompromised mechanical strength under appropriate concentrations [25–28],”
Incorporation of bacterial inhibitor into resin composite
Imazato, S., Torii, M., Tsuchitani, Y., McCabe, J. F., & Russell, R. R. B. (1994) · Journal of Dental Research · doi:10.1177/00220345940730080701 · Cited by 316 · cited 1×
“It has already been reported that the advantage of quaternary ammonium methacrylates is they can endow methacrylate resin based dental materials with antibacterial activity without undermining the mechanical properties [26,39,47], but it is limited to an appropriate concentration.”
Antonucci, J. M., Zeiger, D. N., Tang, K., Lin-Gibson, S., Fowler, B. O., & Lin, N. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.004 · Cited by 287 · cited 2×
“However, like some monomethacrylates with pendant quaternary ammonium moieties, DDMAI also showed miscibility problem with hydrophobic dimethacrylates used in dental composites [33], and the polymer with low concentration of DDMAI could not show obvious antibacterial and radio-opaque activity.”
Balamurugan, A., Balossier, G., Laurent-Maquin, D., Pina, S., Rebelo, A. H. S., Faure, J., & Ferreira, J. M. F. (2008) · Dental Materials · doi:10.1016/j.dental.2008.02.015 · Cited by 261 · cited 1×
“mutans, thus reducing the number of bacteria available for adherence [57–59]; and (II) DDMAI immobilized in the polymer network, killing the bacteria which”
Wang, G., Weng, Y., Chu, D., Xie, D., & Chen, R. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.09.037 · Cited by 243 · cited 1×
“In the structure of DDMAI, there exist both positive and negative charges, which can absorb water [48,52], so water sorption of DDMAI-containing polymers were higher than that of the control polymer.”
Lassila, L. V. J., Nohrström, T., & Vallittu, P. K. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00355-6 · Cited by 239
Self-citationGonçalves, F., Kawano, Y., Pfeifer, C., Stansbury, J. W., & Braga, R. R. (2009) · European Journal of Oral Sciences · doi:10.1111/j.1600-0722.2009.00636.x · Cited by 215
Research works printed but not linked: 2
- Imazato S. Torii M. Tsuchitani Y. Immobilization of an antibacterial component in composite resin Dent. Jpn 1993 30 63 68
- Worley S.D. Sun G. Biocidal polymers Trends Polym. Sci 1996 4 364 370
Cited by
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
Therapeutic polymers for dental adhesives: Loading resins with bio-active components
Imazato, S., Ma, S., Chen, J.-H., & Xu, H. H. K. (2014) · Dental Materials · doi:10.1016/j.dental.2013.06.003 · Cited by 173
“Antibacterial monomers with radio-opacity have also been developed using iodine as a counter ion [18,19] (Fig.”
BackgroundCocco, A. R., da Rosa, W. L. D. O., da Silva, A. F., Lund, R. G., & Piva, E. (2015) · Dental Materials · doi:10.1016/j.dental.2015.08.155 · Cited by 174
“The majority of monomers tested did not affect the material properties [63,66,67], however in some studies, a reduction of mechanical properties was observed, due to the large amount of incorporated monomer [57].”
BackgroundBacterial adhesion mechanisms on dental implant surfaces and the influencing factors
Han, A., Tsoi, J. K. H., Rodrigues, F. P., Leprince, J. G., & Palin, W. M. (2016) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2016.03.022 · Cited by 132
“This could be done either adding some antibacterial chemicals [93, 94] or modifying the resin structure [95].”
BackgroundHe, J., Söderling, E., Lassila, L. V. J., & Vallittu, P. K. (2015) · Dental Materials · doi:10.1016/j.dental.2015.02.007 · Cited by 58
Self-citationLiang, X., Söderling, E., Liu, F., He, J., Lassila, L. V. J., & Vallittu, P. K. (2014) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5156-x · Cited by 57
“However, an appropriate concentration of QAM in the dental materials is very important, because insufficient QAM would limit the antibacterial activity of dental materials [20, 23, 24], and excess QAM would disrupt the mechanical properties of dental materials [20, 22, 25].”
BackgroundSelf-citationSaroşi, C., Moldovan, M., Șoancă, A., Roman, A., Gherman, T., Trifoi, A. R., Chisnoiu, A. M., Cuc, S., Filip, M., Gheorghe, G. F., et al. (2021) · Polymers · doi:10.3390/polym13244415 · Cited by 48
Huang, Q.-T., He, J.-W., Lin, Z.-M., Liu, F., Lassila, L. V. J., & Vallittu, P. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.10.028 · Cited by 43
Self-citationEffectiveness of the DHMAI monomer in the development of an antibacterial dental composite
Cherchali, F. Z., Mouzali, M., Tommasino, J. B., Décoret, D., Attik, N., Aboulleil, H., Seux, D., & Grosgogeat, B. (2017) · Dental Materials · doi:10.1016/j.dental.2017.09.004 · Cited by 45
do Amaral, G., Negrini, T. D. C., Maltz, M., & Arthur, R. A. (2016) · Australian Dental Journal · doi:10.1111/adj.12338 · Cited by 43
Biomaterials in Relation to Dentistry
Deb, S., & Chana, S. (2015) · Frontiers of oral physiology/Frontiers of oral biology · doi:10.1159/000381686 · Cited by 35
Yu, B., Liu, F., & He, J. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.03.012 · Cited by 34
Self-citationTailoring the monomers to overcome the shortcomings of current dental resin composites – review
He, J., Lassila, L. V. J., Garoushi, S. K., & VALLITTU, P. K. (2023) · Biomaterial Investigations in Dentistry · doi:10.1080/26415275.2023.2191621 · Cited by 32
“He et al. [109] used Bis-GMA, methyl methacrylate (MMA), and QAM-11 (DDMAI) to prepare resin systems with a high mass fraction (from 15wt.% to 25 wt.”
BackgroundMethodSelf-citationHe, X., Ye, L., He, R., He, J., Ouyang, S., & Zhang, J. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105487 · Cited by 25
Self-citationRecent Advances in Quaternary Ammonium Monomers for Dental Applications
Liang, X., Yu, B., Ye, L., Lin, D., Zhang, W., Zhong, H., & He, J. (2024) · Materials · doi:10.3390/ma17020345 · Cited by 24
Self-citationPreparation and Characterization of Antibacterial Dental Resin with UDMQA‐12
Huang, Q., Lin, Z., Liang, X., Liu, F., & He, J. (2013) · Advances in Polymer Technology · doi:10.1002/adv.21395 · Cited by 23
Self-citationRao, S., Nandish, B. T., Preman, N. K., Johnson, R. P., Ginjupalli, K., Preethishree, P., Prabhu, A., Das, R., Kukkila, J., & Pai, V. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e10374 · Cited by 22
“The antimicrobial activity of these monomers can be attributed to the presence of positively charged QAM salts with negatively charged halogen counter-ions mainly iodine (DHMAI has iodohexadecane, and DDMAI has iodododecane) groups [10, 13, 18].”
BackgroundFu, W., Liu, Q., Wang, L., Huang, X., Su, Z., Huang, Z., & He, J. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105183 · Cited by 18
Self-citationMechanical and antibacterial properties of benzothiazole-based dental resin materials
Zhu, W., Lao, C.-H., Luo, S., Liu, F., Huang, Q., He, J., & Lin, Z. (2018) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2018.1429861 · Cited by 18
“Though dimethacrylate quaternary ammonium had no miscibility problem with dental resin system, mechanical properties would be impaired by incorporating abundant dimethacrylate quaternary ammonium compounds to get obvious antibacterial activity [21,22,24,25].”
BackgroundSelf-citationThe effect of cycling deflection on the injection-molded thermoplastic denture base resins
Hamanaka, I., Iwamoto, M., Lassila, L. V. J., VALLITTU, P. K., Shimizu, H., & Takahashi, Y. (2015) · Acta Odontologica Scandinavica · doi:10.3109/00016357.2015.1042039 · Cited by 16
Self-citationGonzález‐Alenda, E., Baracco, B., Perdigão, J., Jiménez‐Díez, D., Garrido, M. A., Álvarez‐Lloret, P., Ceballos, L., & Fuentes, V. (2025) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/jerd.70010 · Cited by 14
Evaluation of BPA and Bis-GMA Release from Recent Dental Composite Materials by LC-MS/MS
Lopes‐Rocha, L., Gonçalves, V. M. F., Cunha, S. C., Fernandes, J. O., Pinho, T., & Tiritan, M. E. (2023) · Separations · doi:10.3390/separations10080455 · Cited by 16
“Reducing polymerization shrinkage and enabling cross-linking during polymerization are among the advantages of Bis-GMA [47].”
BackgroundEditorial of the Special Issue Antimicrobial Polymers
Piozzi, A., & Francolini, I. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms140918002 · Cited by 13
“[11] have incorporated a polymerizable antibacterial agent (2-dimethyl-2-dodecyl-1-methacryloxyethyl ammonium iodine, DDMAI) into 2,2-bis[4-(2-hydroxy-3-methacryloxypropyl)-phenyl]propane”
MethodHe, J., VALLITTU, P. K., & Lassila, L. V. J. (2016) · Dental Materials · doi:10.1016/j.dental.2016.12.001 · Cited by 8
Self-citationSynthesis and characterization of calcium-releasing elastomeric resin-based endodontic sealers
Ribeiro, J. S., Xavier, S. R., Cuevas‐Suárez, C. E., Pappen, F. G., Piva, E., Lund, R. G., & Bottino, M. C. (2023) · Clinical Oral Investigations · doi:10.1007/s00784-023-04952-0 · Cited by 3
Effect of PEG Content on the Mechanical Properties of Bis-GMA/TEGDMA/UDMA Dental Resin Composites
Gherman, T., Moldovan, M., Filip, M., Trifoi, A. R., Râpă, M., & Cuc, S. (2017) · Key engineering materials · doi:10.4028/www.scientific.net/kem.752.3 · Cited by 3
Azeez, T. O., Grace, O. I., Odetunde, D. S., Amaka, T. E., & Agbasi, P. U. (2023) · Materials Testing · doi:10.1515/mt-2023-0017 · Cited by 2
Bibliometric analysis of dental adhesives: research status and frontier development
Hu, X., Sun, T., Bin, K., Sun, Y., Chen, L., & Ding, H. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1288717 · Cited by 2
Kamalak, H., Mumcu, A., & Altın, S. (2015) · The Open Dentistry Journal · doi:10.2174/1874210601509010140 · Cited by 2
“Keywords: Cu diffusion, microleakage in dentin, x-ray micro tomography.”
BackgroundZheng, Y., Ye, R., Lai, C., & Zhang, D. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70764 · Cited by 1
Applications of Polymeric Micro- and Nano-Particles in Dentistry
Priyadarshini, B. M., & Dubey, N. (2016) · Advances in medical technologies and clinical practice book series · doi:10.4018/978-1-5225-1043-7.ch003 · Cited by 1
Finns det bioaktiva material och vadbetyder bioaktivitet?
VALLITTU, P. K. (2020) · Aktuel nordisk odontologi · doi:10.18261/issn.2058-7538-2020-01-12
Self-citationApplications of Polymeric Micro- and Nano-Particles in Dentistry
Priyadarshini, B. M., & Dubey, N. (2017) · IGI Global eBooks · doi:10.4018/978-1-5225-1903-4.ch005
Vidal, C. L. (2019) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.58.2019.tde-30092022-164720 · Cited by 1
Incorporação de fármacos em resinas dentárias
Lucas, M. D. S. M. (2016) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Metadata
- Authors
- He, J., Söderling, E., Vallittu, P., & Lassila, L.
- Affiliations
- University of Turku (FI)
- Corresponding author
- He, Jingwei
- Venue
- International Journal of Molecular Sciences
- Publisher
- MDPI AG
- Published
- 2013-03-07
- Volume
- 14
- Issue
- 3
- Pages
- 5445-5460
- ISSN
- 1422-0067 (ISSN-L)
- PMC
- PMC3634471
- OpenAlex
- W2158445156
- Cited by
- 34
- References
- 64
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 1 · 2023: 5 · 2022: 3 · 2021: 1 · 2020: 1 · 2019: 1 · 2018: 1 · 2017: 4 · 2016: 3 · 2015: 7 · 2014: 2 · 2013: 3
- FWCI
- 6.93
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Molecular Sciences (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Health Sciences › Dentistry › Oral Surgery › Endodontics and Root Canal Treatments
- Physical Sciences › Materials Science › Polymers and Plastics › Epoxy Resin Curing Processes
- Keywords
- Bis-GMA, methyl methacrylate, quaternary ammonium methacrylate, degree of conversion, flexural strength, water sorption, solubility, antibacterial activity, mechanical properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.