Preparation and Evaluation of Dental Resin with Antibacterial and Radio-Opaque Functions
Open accessThe DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
In order to prepare antibacterial and radio-opaque dental resin, a methacrylate monomer named 2-Dimethyl-2-dodecyl-1-methacryloxyethyl ammonium iodine (DDMAI) with both antibacterial and radio-opaque activities was added into a 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropyl)-phenyl]propane (Bis-GMA)/methyl methacrylate (MMA) dental resin system. Degree of conversion (DC), flexural strength (FS) and modulus (FM), water sorption (WS) and solubility (WSL), antibacterial activity, and radio-opacity (ROX) of the obtained dental resin system were investigated. Bis-GMA/MMA resin system without DDMAI was used as a control. The results showed that DDMAI could endow BIS-GMA/MMA resin system with good antibacterial (p < 0.05) and radio-opaque function without influencing the DC (p > 0.05). However, incorporating DDMAI into Bis-GMA/MMA resin could reduce mechanical properties (p < 0.05) and increase WS and WSL (p < 0.05), thus further work is needed in order to optimize the resin formulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Due to the high electron density of iodine, substitution of the halogen anions in QACs with iodine as the counter ion results in radiopaque antibacterial monomers [69], [241], [242], [243], [245].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [242]
In the citing paper
“Incorporation of 5% DDMAI had no adverse effect on the conversion and flexural strength of the resin composite and provided radio-opaque and antibacterial effects.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [242]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Chemistry and Applications of Antimicrobial Polymers: A State-of-the-Art Review
Kenawy, E.-R., Worley, S. D., & Broughton, R. (2007) · Biomacromolecules · doi:10.1021/bm061150q · Cited by 1,558
Structures of Novel Antimicrobial Agents for Textiles - A Review
Simoncic, B., & Tomsic, B. (2010) · Textile Research Journal · doi:10.1177/0040517510363193 · Cited by 604
The Microbiology of Primary Dental Caries in Humans
Tanzer, J. M., Livingston, J., & Thompson, A. M. (2001) · Journal of Dental Education · doi:10.1002/j.0022-0337.2001.65.10.tb03446.x · Cited by 593 · cited 1×
“mutans has a central role in the initiation of dental caries on enamel and root surface [56].”
Antibacterial properties of resin composites and dentin bonding systems
Imazato, S. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00102-1 · Cited by 447 · cited 1×
“Studies showed that MDPB containing dental restorative materials had the advantages of long-lasting antibacterial activity and uncompromised mechanical strength under appropriate concentrations [25–28],”
Incorporation of bacterial inhibitor into resin composite
Imazato, S., Torii, M., Tsuchitani, Y., McCabe, J. F., & Russell, R. R. B. (1994) · Journal of Dental Research · doi:10.1177/00220345940730080701 · Cited by 316 · cited 1×
“It has already been reported that the advantage of quaternary ammonium methacrylates is they can endow methacrylate resin based dental materials with antibacterial activity without undermining the mechanical properties [26,39,47], but it is limited to an appropriate concentration.”
Antonucci, J. M., Zeiger, D. N., Tang, K., Lin-Gibson, S., Fowler, B. O., & Lin, N. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.004 · Cited by 287 · cited 2×
“However, like some monomethacrylates with pendant quaternary ammonium moieties, DDMAI also showed miscibility problem with hydrophobic dimethacrylates used in dental composites [33], and the polymer with low concentration of DDMAI could not show obvious antibacterial and radio-opaque activity.”
Balamurugan, A., Balossier, G., Laurent-Maquin, D., Pina, S., Rebelo, A. H. S., Faure, J., & Ferreira, J. M. F. (2008) · Dental Materials · doi:10.1016/j.dental.2008.02.015 · Cited by 261 · cited 1×
“mutans, thus reducing the number of bacteria available for adherence [57–59]; and (II) DDMAI immobilized in the polymer network, killing the bacteria which”
Wang, G., Weng, Y., Chu, D., Xie, D., & Chen, R. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.09.037 · Cited by 243 · cited 1×
“In the structure of DDMAI, there exist both positive and negative charges, which can absorb water [48,52], so water sorption of DDMAI-containing polymers were higher than that of the control polymer.”
Lassila, L. V. J., Nohrström, T., & Vallittu, P. K. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00355-6 · Cited by 239
Self-citationGonçalves, F., Kawano, Y., Pfeifer, C., Stansbury, J. W., & Braga, R. R. (2009) · European Journal of Oral Sciences · doi:10.1111/j.1600-0722.2009.00636.x · Cited by 215
Antibacterial and mechanical properties of restorative materials combined with chlorhexidines
JEDRYCHOWSKI, J. R., CAPUTO, A. A., & KERPER, S. (1983) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.1983.tb00133.x · Cited by 211 · cited 1×
“However, even a small amount of an antibacterial agent like chlorhexidine can reduce the mechanical properties of dental restorative materials [21], and the release of the agent may”
Thonemann, B., Schmalz, G., Hiller, K.-A., & Schweikl, H. (2002) · Dental Materials · doi:10.1016/s0109-5641(01)00056-2 · Cited by 200
Chlorhexidine-releasing methacrylate dental composite materials
Leung, D., Spratt, D. A., Pratten, J., Gulabivala, K., Mordan, N. J., & Young, A. M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.014 · Cited by 193 · cited 1×
“A simple way to endow dental restorative materials with antibacterial activity is by incorporating an antibacterial agent into the materials [16–19].”
Water sorption characteristics of light-cured dental resins and composites based on Bis-EMA/PCDMA
Sideridou, I., Achilias, D. S., Spyroudi, C., & Karabela, M. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00529-5 · Cited by 189 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Preparation and evaluation of a novel glass-ionomer cement with antibacterial functions
Xie, D., Weng, Y., Guo, X., Zhao, J., Gregory, R. L., & Zheng, C. (2011) · Dental Materials · doi:10.1016/j.dental.2011.02.006 · Cited by 188 · cited 1×
“Subsequently, several polymerizable antibacterial monomers were prepared to formulate long-lasting antibacterial dental restorative materials [29–34].”
Antibacterial activity of MDPB polymer incorporated in dental resin
Imazato, S., Russell, R. R. B., & McCabe, J. F. (1995) · Journal of Dentistry · doi:10.1016/0300-5712(95)93576-n · Cited by 186 · cited 1×
“However, antibacterial activity of QAM would be reduced after immobilization [27], so that is why more bacteria were recovered from the surface of DDMAI-containing polymers after water immersion.”
Synthesis, characterization and evaluation of urethane derivatives of Bis-GMA
Khatri, C. A., Stansbury, J. W., Schultheisz, C. R., & Antonucci, J. M. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00108-2 · Cited by 165 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Geurtsen, W., & Leyhausen, G. (2001) · Journal of Dental Research · doi:10.1177/00220345010800120401 · Cited by 158
Kanazawa, A., Ikeda, T., & Endo, T. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080310615 · Cited by 150
Kışkan, B., Zhang, J., Wang, X., Antonietti, M., & Yağcı, Y. (2012) · ACS Macro Letters · doi:10.1021/mz300116w · Cited by 146
Synthesis and characterization of antibacterial dental monomers and composites
Xu, X., Wang, Y., Liao, S., Wen, Z. T., & Fan, Y. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32683 · Cited by 144 · cited 1×
“concentration of quaternary ammonium methacrylates is beyond a certain limit, mechanical strength could be decreased significantly [34,48,49].”
Ebi, N., Imazato, S., Noiri, Y., & Ebisu, S. (2001) · Dental Materials · doi:10.1016/s0109-5641(01)00006-9 · Cited by 142 · cited 1×
“[64].”
Türkün, M., Türkün, M., ̆RUL, F. E., Ateş, M., & BRUGGER, S. (2008) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/j.1708-8240.2008.00146.x · Cited by 130
Physical and mechanical properties of an experimental dental composite based on a new monomer
Atai, M., Nekoomanesh, M., Hashemi, S. A., & Amani, S. (2004) · Dental Materials · doi:10.1016/j.dental.2003.08.008 · Cited by 118 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Imazato, S., Imai, T., Russell, R. R. B., Torii, M., & Ebisu, S. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19980315)39:4<511::aid-jbm1>3.0.co;2-m · Cited by 115 · cited 1×
“This can inhibit bacterial growth and biofilm formation on the polymer surface [57,60,61].”
Synthesis of methacrylate monomers with antibacterial effects against S. mutans
He, J., Söderling, E., Österblad, M., Vallittu, P. K., & Lassila, L. V. J. (2011) · Molecules · doi:10.3390/molecules16119755 · Cited by 113 · cited 4×
“ammonium iodine (DDMAI) (structure was shown in Figure 1) was synthesized [32] and incorporated into the 2,2-Bis[4-(2-hydroxy-3-methacryloyloxypropyl)-phenyl]propane (Bis-GMA)/tri-ethyleneglycol dimethacrylate (TEGDMA) (50/50, wt/wt) dental resin system as an”
MethodInfluentialSelf-citationSideridou, I. D., Karabela, M. M., & Vouvoudi, E. C. (2007) · Dental Materials · doi:10.1016/j.dental.2007.08.004 · Cited by 103 · cited 1×
“polymer can serve as plasticizer in the polymer and reduce the mechanical properties of it [49–51], so nearly all of experimental polymers had lower FS and FM after water immersion here (Figure 3).”
Imazato, S., Chen, J.-H., Ma, S., Izutani, N., & Li, F. (2012) · Japanese Dental Science Review · doi:10.1016/j.jdsr.2012.02.003 · Cited by 103 · cited 1×
“When it was recognized that dental caries formation can be classified as an infectious disease, introduced by cariogenic bacteria, attempts to create restorative materials with antibacterial activity became an attractive topic in dental materials science [15].”
Huang, L., Xiao, Y.-H., Xing, X.-D., Li, F., Ma, S., Qi, L.-L., & Chen, J.-H. (2011) · Archives of Oral Biology · doi:10.1016/j.archoralbio.2010.10.011 · Cited by 103 · cited 1×
“Subsequently, several polymerizable antibacterial monomers were prepared to formulate long-lasting antibacterial dental restorative materials [29–34].”
Lu, H. Z., Stansbury, J. W., Nie, J., Berchtold, K. A., & Bowman, C. N. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.041 · Cited by 93 · cited 1×
“large amount of DDMAI is incorporated, for there is only one methacrylate in the structure of DDMAI, and this could make the polymer chain more flexible, prolong the vitrification time, and lead to higher DC [46].”
A novel antibacterial resin composite for improved dental restoratives
Weng, Y., Howard, L., Guo, X., Chong, V. J., Gregory, R. L., & Xie, D. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4629-z · Cited by 91 · cited 1×
“concentration of quaternary ammonium methacrylates is beyond a certain limit, mechanical strength could be decreased significantly [34,48,49].”
Xiao, Y., Ma, S., Chen, J., Chai, Z., Li, F., & Wang, Y. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31350 · Cited by 80
Pereira, S. G., Osorio, R., Toledano, M., & Nunes, T. G. (2005) · Dental Materials · doi:10.1016/j.dental.2005.01.018 · Cited by 76 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Early plaque formation on fibre-reinforced composites in vivo
Tanner, J., Robinson, C., Söderling, E. M., & VALLITTU, P. K. (2005) · Clinical Oral Investigations · doi:10.1007/s00784-005-0317-4 · Cited by 69 · cited 1×
“The biofilm collection method has been tested in our earlier studies and it is highly reproducible [65,66].”
Self-citationIncorporation of an antibacterial and radiopaque monomer in to dental resin system
He, J., Söderling, E., Lassila, L. V. J., & Vallittu, P. K. (2012) · Dental Materials · doi:10.1016/j.dental.2012.04.026 · Cited by 64
Self-citationX-Ray Opaque Methacrylate Polymers for Biomedical Applications
Davy, K. W. M., Anseau, M. R., Odlyha, M., & Foster, G. M. (1997) · Polymer International · doi:10.1002/(sici)1097-0126(199706)43:2<143::aid-pi717>3.0.co;2-m · Cited by 63 · cited 1×
“In the halogen elements, iodine is quite radio-opaque because of its high electronic density [35–38].”
Antimicrobial properties of an orthodontic adhesive combined with cetylpyridinium chloride
Al-Musallam, T. A., Evans, C. A., Drummond, J. L., Matasa, C. G., & Wu, C. D. (2006) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2005.10.015 · Cited by 55 · cited 1×
“A simple way to endow dental restorative materials with antibacterial activity is by incorporating an antibacterial agent into the materials [16–19].”
The release of chlorhexidine from modified dental acrylic resin
WILSON, S. J., & WILSON, H. J. (1993) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.1993.tb01613.x · Cited by 54 · cited 1×
“exert toxic effects [22].”
He, J., Söderling, E., Vallittu, P. K., & Lassila, L. V. J. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.699709 · Cited by 53 · cited 1×
“It has already been reported that the advantage of quaternary ammonium methacrylates is they can endow methacrylate resin based dental materials with antibacterial activity without undermining the mechanical properties [26,39,47], but it is limited to an appropriate concentration.”
Self-citationComparative effects of quaternary ammonium mouthrinses on 4‐day plaque regrowth
Moran, J., Addy, M., Jackson, R., & Newcombe, R. G. (2000) · Journal of Clinical Periodontology · doi:10.1034/j.1600-051x.2000.027001037.x · Cited by 53 · cited 1×
“Quaternary ammonium compounds are well known as effective antibacterial agents, and have already been used in many fields, such as water treatment, food applications, textile products, health care products, and wound-healing [40–44].”
Kim, J.-G., & Chung, C. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00242-4 · Cited by 50 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Viljanen, E. K., Langer, S., Skrifvars, M., & VALLITTU, P. K. (2005) · Dental Materials · doi:10.1016/j.dental.2005.11.012 · Cited by 49
Self-citationBiofilm inhibition by an experimental dental resin composite containing octenidine dihydrochloride
Rupf, S., Balkenhol, M., Sahrhage, T., Baum, A., Chromik, J. N., Ruppert, K., Wissenbach, D. K., Maurer, H. H., & Hannig, M. (2012) · Dental Materials · doi:10.1016/j.dental.2012.04.034 · Cited by 48 · cited 1×
“This can inhibit bacterial growth and biofilm formation on the polymer surface [57,60,61].”
Iodinated methacrylate copolymers as X-ray opaque denture base acrylics
Davy, K. W. M., Anseau, M. R., & Berry, C. (1997) · Journal of Dentistry · doi:10.1016/s0300-5712(96)00064-4 · Cited by 45 · cited 1×
“In the halogen elements, iodine is quite radio-opaque because of its high electronic density [35–38].”
Lassila, L. V. J., Garoushi, S., Tanner, J., Vallittu, P. K., & Söderling, E. (2009) · The Open Dentistry Journal · doi:10.2174/1874210600903010227 · Cited by 36 · cited 1×
“The biofilm collection method has been tested in our earlier studies and it is highly reproducible [65,66].”
Self-citationThe Antibacterial Effects of Some Dental Restorative Materials
Shay, D. E., Allen, T. J., & Mantz, R. F. (1956) · Journal of Dental Research · doi:10.1177/00220345560350011201 · Cited by 36 · cited 1×
“A simple way to endow dental restorative materials with antibacterial activity is by incorporating an antibacterial agent into the materials [16–19].”
Photoinitiated polymerization of methyl methacrylate by phenacyl type salts
Kasapoglu, F., Aydın, M., Arsu, N., & Yağcı, Y. (2003) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(03)00180-1 · Cited by 36 · cited 1×
“Photoinitiated polymerization of MMA may occur but it requires irradiation time of a couple of hours before adequate degree of monomer conversion is reached [53,54].”
Weng, Y., Guo, X., Chong, V. J., Howard, L., Gregory, R. L., & Xie, D. (2011) · Journal of Biomedical Science and Engineering · doi:10.4236/jbise.2011.43021 · Cited by 34 · cited 2×
“concentration of quaternary ammonium methacrylates is beyond a certain limit, mechanical strength could be decreased significantly [34,48,49].”
Viljanen, E. K., Skrifvars, M., & VALLITTU, P. K. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20654 · Cited by 32
Self-citationHe, J., Liao, L., Liu, F., Luo, Y., & Jia, D. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3979-7 · Cited by 30 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Self-citationDendrimer/methyl methacrylate co-polymers: residual methyl methacrylate and degree of conversion
Viljanen, E. K., Skrifvars, M., & VALLITTU, P. K. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856205774269566 · Cited by 29
Self-citationEhara, A., Torii, M., Imazato, S., & Ebisu, S. (2000) · Journal of Dental Research · doi:10.1177/00220345000790030701 · Cited by 29 · cited 1×
“A simple way to endow dental restorative materials with antibacterial activity is by incorporating an antibacterial agent into the materials [16–19].”
Galperin, A., Margel, D., & Margel, S. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30863 · Cited by 28
Galperin, A., & Margel, S. (2006) · Biomacromolecules · doi:10.1021/bm060428b · Cited by 27
He, J., Luo, Y., Liu, F., & Jia, D. (2010) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050609x12471222339166 · Cited by 26 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Self-citationHe, J., Liu, F., Luo, Y., & Jia, D. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34955 · Cited by 24 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Self-citationGlass fibre-reinforced composite laced with chlorhexidine digluconate and yeast adhesion
Waltimo, T. M. T., Luo, G., Samaranayake, L. P., & VALLITTU, P. K. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000011811.15602.3a · Cited by 21
Self-citationGiammanco, G. M., Cumbo, E. M. G., Luciani, A., Gallina, G., Mammina, C., & Pizzo, G. (2009) · PubMed · Cited by 21
He, J., Luo, Y., Liu, F., & Jia, D. (2009) · Journal of Biomaterials Applications · doi:10.1177/0885328209350088 · Cited by 19 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Self-citation倉田, 茂., & Yamazaki, N. (2011) · Dental Materials Journal · doi:10.4012/dmj.2010-126 · Cited by 18
Lahdenperä, M., Puska, M. A., Alander, P., Waltimo, T. M. T., & VALLITTU, P. K. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-004-5744-2 · Cited by 17 · cited 1×
“Furthermore, release of antibacterial agents is based on diffusion and therefore quantities of released substances lower over time, which leads to a limited period of antibacterial effectiveness [23,24].”
Self-citationCold Stretching of PPV with Water as a Plasticizer
Dermaut, W., den Kerkhof, T. V., van der Veken, B. J., Mertens, R., & Geise, H. J. (2000) · Macromolecules · doi:10.1021/ma992062j · Cited by 11 · cited 1×
“polymer can serve as plasticizer in the polymer and reduce the mechanical properties of it [49–51], so nearly all of experimental polymers had lower FS and FM after water immersion here (Figure 3).”
Nganga, S., Travan, A., Donati, I., Crosera, M., Paoletti, S., & VALLITTU, P. K. (2012) · Biomacromolecules · doi:10.1021/bm300809h · Cited by 10 · cited 1×
“, nanosized silver particles and chlorhexidine [20].”
Self-citationRubber‐toughening of dimethacrylate dental composite resin
Lee, V. A., Cardenas, H. L., & Rawls, H. R. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31674 · Cited by 9 · cited 1×
“Since the 1990s, there has been a growing interest in improving properties of dental materials used in restorative dentistry, and many of them are concerned with improving mechanical properties [1–4], decreasing water sorption and solubility [5–8], reducing polymerization shrinkage [7–11], and increasing monomer conve…”
Research works printed but not linked: 2
- Imazato S. Torii M. Tsuchitani Y. Immobilization of an antibacterial component in composite resin Dent. Jpn 1993 30 63 68
- Worley S.D. Sun G. Biocidal polymers Trends Polym. Sci 1996 4 364 370
Cited by
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
Therapeutic polymers for dental adhesives: Loading resins with bio-active components
Imazato, S., Ma, S., Chen, J.-H., & Xu, H. H. K. (2014) · Dental Materials · doi:10.1016/j.dental.2013.06.003 · Cited by 173
“Antibacterial monomers with radio-opacity have also been developed using iodine as a counter ion [18,19] (Fig.”
BackgroundCocco, A. R., da Rosa, W. L. D. O., da Silva, A. F., Lund, R. G., & Piva, E. (2015) · Dental Materials · doi:10.1016/j.dental.2015.08.155 · Cited by 174
“The majority of monomers tested did not affect the material properties [63,66,67], however in some studies, a reduction of mechanical properties was observed, due to the large amount of incorporated monomer [57].”
BackgroundBacterial adhesion mechanisms on dental implant surfaces and the influencing factors
Han, A., Tsoi, J. K. H., Rodrigues, F. P., Leprince, J. G., & Palin, W. M. (2016) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2016.03.022 · Cited by 132
“This could be done either adding some antibacterial chemicals [93, 94] or modifying the resin structure [95].”
BackgroundHe, J., Söderling, E., Lassila, L. V. J., & Vallittu, P. K. (2015) · Dental Materials · doi:10.1016/j.dental.2015.02.007 · Cited by 58
Self-citation
Metadata
- Authors
- He, J., Söderling, E., Vallittu, P., & Lassila, L.
- Affiliations
- University of Turku (FI)
- Corresponding author
- He, Jingwei
- Venue
- International Journal of Molecular Sciences
- Publisher
- MDPI AG
- Published
- 2013-03-07
- Volume
- 14
- Issue
- 3
- Pages
- 5445-5460
- ISSN
- 1422-0067 (ISSN-L)
- PMC
- PMC3634471
- OpenAlex
- W2158445156
- Cited by
- 34
- References
- 64
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 1 · 2023: 5 · 2022: 3 · 2021: 1 · 2020: 1 · 2019: 1 · 2018: 1 · 2017: 4 · 2016: 3 · 2015: 7 · 2014: 2 · 2013: 3
- FWCI
- 6.93
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Molecular Sciences (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Health Sciences › Dentistry › Oral Surgery › Endodontics and Root Canal Treatments
- Physical Sciences › Materials Science › Polymers and Plastics › Epoxy Resin Curing Processes
- Keywords
- Bis-GMA, methyl methacrylate, quaternary ammonium methacrylate, degree of conversion, flexural strength, water sorption, solubility, antibacterial activity, mechanical properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.