CoChat

Orthotopic Bone Formation by Streamlined Engineering and Devitalization of Human Hypertrophic Cartilage

Open access
Pigeot, Sébastien, Bourgine, Paul Emile, Claude, Jaquiery, Scotti, Celeste, Papadimitropoulos, Adam, Todorov, Atanas, Epple, Christian, Peretti, Giuseppe M., Martin, Ivan · 2020 · International Journal of Molecular Sciences

The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.

Abstract

Most bones of the human body form and heal through endochondral ossification, whereby hypertrophic cartilage (HyC) is formed and subsequently remodeled into bone. We previously demonstrated that HyC can be engineered from human mesenchymal stromal cells (hMSC), and subsequently devitalized by apoptosis induction. The resulting extracellular matrix (ECM) tissue retained osteoinductive properties, leading to ectopic bone formation. In this study, we aimed at engineering and devitalizing upscaled quantities of HyC ECM within a perfusion bioreactor, followed by in vivo assessment in an orthotopic bone repair model. We hypothesized that the devitalized HyC ECM would outperform a clinical product currently used for bone reconstructive surgery. Human MSC were genetically engineered with a gene cassette enabling apoptosis induction upon addition of an adjuvant. Engineered hMSC were seeded, differentiated, and devitalized within a perfusion bioreactor. The resulting HyC ECM was subsequently implanted in a 10-mm rabbit calvarial defect model, with processed human bone (Maxgraft®) as control. Human MSC cultured in the perfusion bioreactor generated a homogenous HyC ECM and were efficiently induced towards apoptosis. Following six weeks of in vivo implantation, microcomputed tomography and histological analyses of the defects revealed an increased bone formation in the defects filled with HyC ECM as compared to Maxgraft®. This work demonstrates the suitability of engineered devitalized HyC ECM as a bone substitute material, with a performance superior to a state-of-the-art commercial graft. Streamlined generation of the devitalized tissue transplant within a perfusion bioreactor is relevant towards standardized and automated manufacturing of a clinical product.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ijms21197233

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Overview of the experimental plan. Briefly, hMSCs are isolated from total human iliac crest bone marrow (hBM) samples by plastic adhesion. hBM-MSCs are then transduced with lentivirus carrying the inducible caspase 9 (iDS). FACS sorted hBM-MSCs carrying the iDS are then expanded and seeded on collagen sponge within the 3D perfusion bioreactor system. Following the 3 weeks chondrogenic and 2 weeks hypertrophic differentiation protocol, apoptosis is induced overnight in the perfusion bioreactor. HyC ECM are then retrieved, chopped and implanted into 10 mm orthotopic bilateral calvarial defects in combination with the commercially available Maxgraft® granules. Analysis of the calvarial defects is done 6 weeks post-implantation.
Figure 1 Overview of the experimental plan. Briefly, hMSCs are isolated from total human iliac crest bone marrow (hBM) samples by plastic adhesion. hBM-MSCs are then transduced with lentivirus carrying the inducible caspase 9 (iDS). FACS sorted hBM-MSCs carrying the iDS are then expanded and seeded on collagen sponge within the 3D perfusion bioreactor system. Following the 3 weeks chondrogenic and 2 weeks hypertrophic differentiation protocol, apoptosis is induced overnight in the perfusion bioreactor. HyC ECM are then retrieved, chopped and implanted into 10 mm orthotopic bilateral calvarial defects in combination with the commercially available Maxgraft® granules. Analysis of the calvarial defects is done 6 weeks post-implantation.CC BY · PubMed Central
Figure 2 In vitro hypertrophic cartilage (HyC) characterization. (A) GAG released quantities in the cell culture media during the 5 weeks in vitro differentiation towards hypertrophic cartilage. (B) GAG measured in the HyC ECM after the 5 weeks in vitro differentiation. The GAG is measured per mg of ECM (n = 6). (C) Gene expression analysis by qRT-PCR following the 5 weeks in vitro differentiation protocol (n ≥ 3). (D) Sections from the top of the hypertrophic cartilage following 5 weeks in vitro differentiation and before being chopped for orthotopic implantation (scale bar = 1 mm for the whole tissue and 100µm for the zoom-in). GAG is stained in red on the Safranin-O staining (Saf-O). Mineralization stains in red on the Alizarin Red. Collagen type X stains in pink on the immunohistochemistry staining. (E) Pictures of the live/dead assay staining in living (Non-apoptized) and devitalized (Apoptized) hypertrophic cartilage and the related cell quantification (scale bar = 200µm) (n = 15). Dead cells were represented as a percentage of total quantified cells (living + dead) by imageJ analysis following cells segmentation and quantification. Graphs show the average and SEM. Statistics are two tailed unpaired t-test, * p ≤ 0.05.
Figure 2 In vitro hypertrophic cartilage (HyC) characterization. (A) GAG released quantities in the cell culture media during the 5 weeks in vitro differentiation towards hypertrophic cartilage. (B) GAG measured in the HyC ECM after the 5 weeks in vitro differentiation. The GAG is measured per mg of ECM (n = 6). (C) Gene expression analysis by qRT-PCR following the 5 weeks in vitro differentiation protocol (n ≥ 3). (D) Sections from the top of the hypertrophic cartilage following 5 weeks in vitro differentiation and before being chopped for orthotopic implantation (scale bar = 1 mm for the whole tissue and 100µm for the zoom-in). GAG is stained in red on the Safranin-O staining (Saf-O). Mineralization stains in red on the Alizarin Red. Collagen type X stains in pink on the immunohistochemistry staining. (E) Pictures of the live/dead assay staining in living (Non-apoptized) and devitalized (Apoptized) hypertrophic cartilage and the related cell quantification (scale bar = 200µm) (n = 15). Dead cells were represented as a percentage of total quantified cells (living + dead) by imageJ analysis following cells segmentation and quantification. Graphs show the average and SEM. Statistics are two tailed unpaired t-test, * p ≤ 0.05.CC BY · PubMed Central
Figure 3 µCT analysis of the calvarial defect. (A) 3D µCT reconstruction of the analyzed volumes. (B) Mineralization quantification in the 10 mm diameter area and (C) in the 5 mm diameter area. Graphs show the average and SEM (n = 5). Statistics are two tailed unpaired t-test, * p ≤ 0.05.
Figure 3 µCT analysis of the calvarial defect. (A) 3D µCT reconstruction of the analyzed volumes. (B) Mineralization quantification in the 10 mm diameter area and (C) in the 5 mm diameter area. Graphs show the average and SEM (n = 5). Statistics are two tailed unpaired t-test, * p ≤ 0.05.CC BY · PubMed Central
Figure 4 Histological analysis of the retrieved calvarial samples. (A) Representative sections of the calvaria 6 weeks after in vivo implantation. Saf-O stains bone in deep green and cartilage in red. Masson stains mature bone in brown and newly formed bone in deep green. H&E stains bone in deep pink. H&E Fluo shows the autofluorescnce of the collagen staining from eosin corresponding to the bone. (scale bar = 1000µm) (B) Zoom of squares indicated in part A to highlight bone formation in the calvaria in contact with the implanted material (scale bar = 100µm) (C,D) Bone quantified by histomorpho-quantification using H&E staining and tissue autofluorescence. Graph represents the quantified (C) total bone disconnected from the calvaria, (D) only in contact with the implanted material. Graphs show the average and SEM (n = 5). Statistics are two tailed unpaired t-test, * p ≤ 0.05 ; ** p ≤ 0.01.
Figure 4 Histological analysis of the retrieved calvarial samples. (A) Representative sections of the calvaria 6 weeks after in vivo implantation. Saf-O stains bone in deep green and cartilage in red. Masson stains mature bone in brown and newly formed bone in deep green. H&E stains bone in deep pink. H&E Fluo shows the autofluorescnce of the collagen staining from eosin corresponding to the bone. (scale bar = 1000µm) (B) Zoom of squares indicated in part A to highlight bone formation in the calvaria in contact with the implanted material (scale bar = 100µm) (C,D) Bone quantified by histomorpho-quantification using H&E staining and tissue autofluorescence. Graph represents the quantified (C) total bone disconnected from the calvaria, (D) only in contact with the implanted material. Graphs show the average and SEM (n = 5). Statistics are two tailed unpaired t-test, * p ≤ 0.05 ; ** p ≤ 0.01.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 40 references

Cited by

See all 15

Metadata

Authors
Pigeot, S., Bourgine, P. E., Claude, J., Scotti, C., Papadimitropoulos, A., Todorov, A., Epple, C., Peretti, G. M., & Martin, I.
Affiliations
  • University of Basel (CH)
  • Department of Surgery, University Hospital Basel, University of Basel, 4031 Basel, Switzerland
  • IRCCS Ospedale Galeazzi - Sant'Ambrogio (IT)
  • University of Milan (IT)
  • Department of Biomedicine, University Hospital Basel, University of Basel, 4031 Basel, Switzerland
Venue
International Journal of Molecular Sciences
Publisher
MDPI AG
Published
2020-09-30
Volume
21
Issue
19
Pages
7233
ISSN
1422-0067 (ISSN-L)
OpenAlex
W3089985264
Cited by
15
References
40
Citations by year
2026: 1 · 2025: 3 · 2024: 3 · 2023: 3 · 2022: 3 · 2021: 2
FWCI
0.63
Type
journal article
Language
en
Open access
Locations
  • International Journal of Molecular Sciences (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Archivio Istituzionale della Ricerca (Universita Degli Studi Di Milano) (submittedVersion, other-oa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Lund University Publications (Lund University) (submittedVersion)
Funders
  • Eurostars Program (E!7865)
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (310030-133110)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
  • Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Mesenchymal stem cell research
Keywords
hypertrophic cartilage, extracellular matrix, endochondral ossification, mesenchymal stem cells, apoptosis induction, perfusion bioreactor, bone substitutes, calvarial defect, rabbit model, tissue engineering, bone regeneration
MeSH terms
Animals, Cartilage, Cell Differentiation, Extracellular Matrix, Humans, Osteogenesis, Rabbits, Skull, Wound Healing, Bone Remodeling, Apoptosis, Bone Substitutes, Tissue Engineering, Mesenchymal Stem Cell Transplantation, Tissue Scaffolds, Mesenchymal Stem Cells

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Orthotopic Bone Formation by Streamlined Engineering and Devitalization of Human Hypertrophic Cartilage. https://app.cochat.ai/papers/10.3390/ijms21197233
The paper
Pigeot, S., Bourgine, P. E., Claude, J., Scotti, C., Papadimitropoulos, A., Todorov, A., Epple, C., Peretti, G. M., & Martin, I. (2020). Orthotopic Bone Formation by Streamlined Engineering and Devitalization of Human Hypertrophic Cartilage. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms21197233

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.