The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines
Open accessAbstract
Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Self-citationTan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
Lu, Y., Wu, S., Gan, Y., Huang, T., Yang, C., Junjie, L., & Lin, J. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2015.07.009 · Cited by 600
Formation of metastable cellular microstructures in selective laser melted alloys
Prashanth, K. G., & Eckert, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.209 · Cited by 597
Self-citationAttar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Self-citationMicrostructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
Kempen, K., Yasa, E., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.033 · Cited by 566
Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O., & Ramamurty, U. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.009 · Cited by 549
Self-citationProcessing metallic glasses by selective laser melting
Pauly, S., Löber, L., Petters, R., Stoica, M., Scudino, S., Kühn, U., & Eckert, J. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.018 · Cited by 446
Self-citationMicrostructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E., Kersting, R., Klein, T. B., Cruz, M. F., & Borille, A. V. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.061 · Cited by 386
Defining the tensile properties of Al-12Si parts produced by selective laser melting
Prashanth, K. G., Scudino, S., & Eckert, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.044 · Cited by 382
Self-citationHrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322
Kanagarajah, P., Brenne, F., Niendorf, T., & Maier, H. J. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.09.025 · Cited by 318
Selective laser melting of Invar 36: Microstructure and properties
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.020 · Cited by 292
Shi, Q., Gu, D., Xia, M., Cao, S., & Rong, T. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.04.009 · Cited by 292
Textures formed in a CoCrMo alloy by selective laser melting
Zhou, X., Li, K., Zhang, D., Liu, X., Ma, J., Liu, W., & Shen, Z. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.096 · Cited by 291
Seifi, M., Salem, A. A., Satko, D. P., Shaffer, J., & Lewandowski, J. J. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.001 · Cited by 291
Additive manufacturing of Cu–10Sn bronze
Scudino, S., Unterdörfer, C., Prashanth, K. G., Attar, H., Ellendt, N., Uhlenwinkel, V., & Eckert, J. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.05.076 · Cited by 284
Self-citationArdila, L. C., Garciandia, F., González-Díaz, J. B., Álvarez, P., Echeverria, A., Petite, M. M., Deffley, R., & Ochoa, J. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.152 · Cited by 268
Yang, Q., Zhang, P., Cheng, L., Min, Z., Chyu, M., & To, A. C. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.012 · Cited by 242
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
Kumar, A., Mandal, S., Barui, S., Vasireddi, R., Gbureck, U., Gelinsky, M., & Basu, B. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.01.001 · Cited by 225
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
Karthik, G. M., Panikar, S., Ram, G. D. J., & Kottada, R. S. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.10.038 · Cited by 205
Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes
Meteyer, S., Xu, X., Perry, N., & Zhao, Y. F. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.06.030 · Cited by 192
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
Mostafaei, A., Stevens, E. L., Hughes, E. T., Biery, S. D., Hilla, C., & Chmielus, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.067 · Cited by 192
Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
Ma, P., Prashanth, K., Scudino, S., Jia, Y., Wang, H., Zou, C., Wei, Z., & Eckert, J. (2014) · Metals · doi:10.3390/met4010028 · Cited by 181
Self-citationProduction of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
Prashanth, K. G., Shahabi, H. S., Attar, H., et al. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.01.001 · Cited by 174
Mostafaei, A., Toman, J., Stevens, E. L., Hughes, E. T., Krimer, Y. L., & Chmielus, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.021 · Cited by 169
Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy
Löber, L., Schimansky, F. P., Kühn, U., Pyczak, F., & Eckert, J. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.04.002 · Cited by 166
Self-citationEnergy consumption model of Binder-jetting additive manufacturing processes
Xu, X. S., Meteyer, S., Perry, N., et al. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.937013 · Cited by 152
Zhang, B., Bi, G., Nai, M. L. S., Sun, C., & Wei, J. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.01.010 · Cited by 139
Zhu, Y., Zou, J. T., Chen, X., & Yang, H. (2016) · Wear · doi:10.1016/j.wear.2016.01.004 · Cited by 133
Lu, Y., Wu, S., Gan, Y., Zhang, S., Guo, S., Lin, J., & Lin, J. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.10.019 · Cited by 116
Selective Laser Melting of Ti-45Nb Alloy
Schwab, H., Prashanth, K. G., Löber, L., Kühn, U., & Eckert, J. (2015) · Metals · doi:10.3390/met5020686 · Cited by 113
Self-citationZhuravleva, K., Bönisch, M., Prashanth, K. G., Hempel, U., Helth, A., Gemming, T., Calin, M., Scudino, S., Schultz, L., Eckert, J., et al. (2013) · Materials · doi:10.3390/ma6125700 · Cited by 100
Self-citationFeasibility Study of an Extrusion-based Direct Metal Additive Manufacturing Technique
Annoni, M., Giberti, H., & Strano, M. (2016) · Procedia Manufacturing · doi:10.1016/j.promfg.2016.08.079 · Cited by 65
Multi-scale modeling of shape distortions during sintering of bi-layers
Molla, T. T., Bjørk, R., Olevsky, E. A., Pryds, N., & Frandsen, H. L. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.02.041 · Cited by 38
Modeling of gravity-induced shape distortions during sintering of cylindrical specimens
Alvarado-Contreras, J. A., Olevsky, E. A., & German, R. M. (2013) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2013.02.007 · Cited by 22
Sintering shape distortions controlled by interface roughness in powder composites
Giuntini, D., Chen, I., & Olevsky, E. A. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.06.024 · Cited by 18
Cited by
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Metadata
- Authors
- Gokuldoss, P. K., Kolla, S., & Eckert, J.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2017-06-19
- Volume
- 10
- Issue
- 6
- Pages
- 672
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2648389189
- Cited by
- 804
- References
- 53
- FWCI
- 41.14
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.