The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines
Open accessAbstract
Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Cited by
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications
Tian, Y., Chen, C., Xu, X., Wang, J., Hou, X., Li, K., Lu, X., Shi, H., Lee, E.-S., & Jiang, H. B. (2021) · Scanning · doi:10.1155/2021/9950131 · Cited by 569
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review
Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S., & Gisario, A. (2019) · Applied Sciences · doi:10.3390/app9183865 · Cited by 419
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Metal additive manufacturing: Technology, metallurgy and modelling
Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.025 · Cited by 378
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Corrosion of Additively Manufactured Alloys: A Review
Sander, G., Tan, J., Balan, P., Gharbi, O., Feenstra, D. R., Singer, L., Thomas, S., Kelly, R. G., Scully, J. R., & Birbilis, N. (2018) · Corrosion · doi:10.5006/2926 · Cited by 344
Recent Development in Beta Titanium Alloys for Biomedical Applications
Chen, L.-Y., Cui, Y.-W., & Zhang, L.-C. (2020) · Metals · doi:10.3390/met10091139 · Cited by 330
Research status of laser additive manufacturing for metal: a review
Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.050 · Cited by 318
Mutua, J., Nakata, S., Onda, T., & Chen, Z.-C. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.042 · Cited by 315
Powder bed fusion process in additive manufacturing: An overview
Singh, R., Gupta, A., Tripathi, O., Srivastava, S., Singh, B., Awasthi, A., Rajput, S. K., Sonia, P., Singhal, P., & Saxena, K. K. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.02.635 · Cited by 300
Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
Mirzababaei, S., & Pasebani, S. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3030082 · Cited by 290
Three-dimensional printing of metals for biomedical applications
Ni, J., Ling, H., Zhang, S., Wang, Z., Peng, Z., Benyshek, C., Zan, R., Miri, A. K., Li, Z., Zhang, X., et al. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100024 · Cited by 279
Chen, S.-G., Gao, H.-J., Zhang, Y.-D., Wu, Q., Gao, Z.-H., & Zhou, X. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.054 · Cited by 274
Various manufacturing methods and ideal properties of scaffolds for tissue engineering applications
Suamte, L., Tirkey, A., Barman, J., & Jayasekhar Babu, P. (2023) · Smart Materials in Manufacturing · doi:10.1016/j.smmf.2022.100011 · Cited by 259
Additive manufactured high entropy alloys: A review of the microstructure and properties
Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110875 · Cited by 255
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Nagarajan, B., Hu, Z., Song, X., Zhai, W., & Wei, J. (2019) · Engineering · doi:10.1016/j.eng.2019.07.002 · Cited by 254
Coated metal powders for laser powder bed fusion (L-PBF) processing: A review
Bidulsky, R., Gobber, F. S., Bidulska, J., Ceroni, M., Kvackaj, T., & Grande, M. A. (2021) · Metals · doi:10.3390/met11111831 · Cited by 68
Raghavan, S., Dzugan, J., Rzepa, S., Podany, P., Soh, N., Hao, L. J., & Khan, N. (2023) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2022-0089 · Cited by 8
Metadata
- Authors
- Gokuldoss, P. K., Kolla, S., & Eckert, J.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2017-06-19
- Volume
- 10
- Issue
- 6
- Pages
- 672
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2648389189
- Cited by
- 804
- References
- 53
- FWCI
- 41.14
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.