The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM
Open accessAbstract
The triply periodic minimal surface (TPMS) method is a novel approach for lattice design in a range of fields, such as impact protection and structural lightweighting. In this paper, we used the TPMS formula to rapidly and accurately generate the most common lattice structure, named the body centered cubic (BCC) structure, with certain volume fractions. TPMS-based and computer aided design (CAD) based BCC lattice structures with volume fractions in the range of 10–30% were fabricated by selective laser melting (SLM) technology with Ti–6Al–4V and subjected to compressive tests. The results demonstrated that local geometric features changed the volume and stress distributions, revealing that the TPMS-based samples were superior to the CAD-based ones, with elastic modulus, yield strength and compression strength increasing in the ranges of 18.9–42.2%, 19.2–29.5%, and 2–36.6%, respectively. The failure mechanism of the TPMS-based samples with a high volume fraction changed to brittle failure observed by scanning electron microscope (SEM), as their struts were more affected by the axial force and fractured on struts. It was also found that the TPMS-based samples have a favorable capacity to absorb energy, particularly with a 30% volume fraction, the energy absorbed up to 50% strain was approximately three times higher than that of the CAD-based sample with an equal volume fraction. Furthermore, the theoretic Gibson–Ashby mode was established in order to predict and design the mechanical properties of the lattice structures. In summary, these results can be used to rapidly create BCC lattice structures with superior compressive properties for engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Manufacture, characterisation and application of cellular metals and metal foams
Banhart, J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00002-5 · Cited by 3,780
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
L. On the calculation of the equilibrium and stiffness of frames
Maxwell, J. C. (1864) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786446408643668 · Cited by 1,028
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Selective laser melting (SLM) of AlSi12Mg lattice structures
Leary, M., Mazur, M., Elambasseril, J., McMillan, M., Chirent, T., Sun, Y., Qian, M., Easton, M., & Brandt, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.127 · Cited by 525
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Compressive behaviour of stainless steel micro-lattice structures
Gümrük, R., & Mines, R. A. W. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.01.006 · Cited by 445
Qiu, C., Yue, S., Adkins, N. J. E., Ward, M., Hassanin, H., Lee, P. D., Withers, P. J., & Attallah, M. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.031 · Cited by 385
Cao, X., Duan, S., Liang, J., Wen, W., & Fang, D. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.07.006 · Cited by 345
Tancogne‐Dejean, T., & Mohr, D. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.03.027 · Cited by 299
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289
Gümrük, R., Mines, R. A. W., & Karadeniz, S. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.07.070 · Cited by 288
On the performance of truss panels with Kagomé cores
Wang, J., Evans, A. G., Dharmasena, K., & Wadley, H. N. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00349-4 · Cited by 288
Zok, F. W., Waltner, S. A., Wei, Z., Rathbun, H. J., McMeeking, R. M., & Evans, A. G. (2004) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.05.045 · Cited by 275
Drop weight impact behaviour of sandwich panels with metallic micro lattice cores
Mines, R. A. W., Tsopanos, S., Shen, Y., Hasan, R., & McKown, S. T. (2013) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2013.04.007 · Cited by 253
Choy, S. Y., Sun, C., Leong, K. F., & Wei, J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.012 · Cited by 234
An investigation into the compressive properties of stainless steel micro-lattice structures
Ushijima, K., Cantwell, W., Mines, R., Tsopanos, S., & Smith, M. (2011) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636210380997 · Cited by 232
Zhang, X.-Y., Fang, G., & Zhou, J. (2017) · Materials · doi:10.3390/ma10010050 · Cited by 222
Liu, F., Zhang, D., Zhang, P., Zhao, M., & Jafar, S. (2018) · Materials · doi:10.3390/ma11030374 · Cited by 173
Self-citationPrediction of the mechanical properties of micro-lattice structures subjected to multi-axial loading
USHIJIMA, K., Cantwell, W. J., & Chen, D. H. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.017 · Cited by 118
Synthesis of open-cell metal foams by templated directed vapor deposition
Queheillalt, D. T., Hass, D. D., Sypeck, D. J., & Wadley, H. N. G. (2001) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2001.0143 · Cited by 112
Mahshid, R., Hansen, H. N., & Højbjerre, K. L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.020 · Cited by 106
Configuration Optimization Design of Ti6Al4V Lattice Structure Formed by SLM
Bai, L., Zhang, J., Chen, X., Yi, C., Chen, R., & Zhang, Z. (2018) · Materials · doi:10.3390/ma11101856 · Cited by 83
An error diffusion based method to generate functionally graded cellular structures
Brackett, D. J., Ashcroft, I., Wildman, R. D., & Hague, R. (2014) · Computers & Structures · doi:10.1016/j.compstruc.2014.03.004 · Cited by 51
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
A review of additive manufacturing of metamaterials and developing trends
Fan, J., Zhang, L., Wei, S., Zhang, Z., Choi, S.-K., Song, B., & Shi, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.019 · Cited by 440
Metadata
- Authors
- Zhao, M., Liu, F., Fu, G., Zhang, D. Z., Zhang, T., & Zhou, H.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-11-29
- Volume
- 11
- Issue
- 12
- Pages
- 2411
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2902381023
- Cited by
- 257
- References
- 35
- FWCI
- 6.72
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.