Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Open accessThe DOI matches its Crossref record; 89 of the 95 references it cites were found in a registry or an index, and 1 are not checked yet; 20 of the 155 sources its claims cite were checked for support.
Abstract
Nanoparticles are defined as ultrafine particles sized between 1 and 100 nanometres in diameter. In recent decades, there has been wide scientific research on the various uses of nanoparticles in construction, electronics, manufacturing, cosmetics, and medicine. The advantages of using nanoparticles in construction are immense, promising extraordinary physical and chemical properties for modified construction materials. Among the many different types of nanoparticles, titanium dioxide, carbon nanotubes, silica, copper, clay, and aluminium oxide are the most widely used nanoparticles in the construction sector. The promise of nanoparticles as observed in construction is reflected in other adoptive industries, driving the growth in demand and production quantity at an exorbitant rate. The objective of this study was to analyse the use of nanoparticles within the construction industry to exemplify the benefits of nanoparticle applications and to address the short-term and long-term effects of nanoparticles on the environment and human health within the microcosm of industry so that the findings may be generalised. The benefits of nanoparticle utilisation are demonstrated through specific applications in common materials, particularly in normal concrete, asphalt concrete, bricks, timber, and steel. In addition, the paper addresses the potential benefits and safety barriers for using nanomaterials, with consideration given to key areas of knowledge associated with exposure to nanoparticles that may have implications for health and environmental safety. The field of nanotechnology is considered rather young compared to established industries, thus limiting the time for research and risk analysis. Nevertheless, it is pertinent that research and regulation precede the widespread adoption of potentially harmful particles to mitigate undue risk.
Verified 2026-11-19 · 1 reference not checked yet
Overview
CoChat Summary
## TL;DR
This is a narrative review of nanoparticles in construction materials, showing that they can improve properties of concrete, asphalt, bricks, timber, and steel while also raising health, environmental, and regulatory concerns. The paper argues that research and regulation have not kept pace with nanoparticle use, especially for exposure, disposal, and incidental nanoparticle generation.
## Key findings
- In concrete, nano-silica improved particle packing, increased cement hydration, reduced setting time and porosity, and increased early strength; nano-titania (TiO2) enabled self-cleaning/self-disinfecting effects, and carbon nanotubes improved pore filling and durability.
- In asphalt concrete, a 5% inclusion of nano-aluminium oxide (Al2O3) showed strong resistance to high temperatures, and nanoparticle modifiers were reported to greatly improve serviceability.
- In bricks, a 5% inclusion of nano-clay increased compressive strength to 4.8 times that of normal clay bricks; alkosiloxane with 1%–1.5% silica nanoparticles was reported as the most effective protective coating.
- The review reports several exposure and risk figures: 2012 voluntary production data showed TiO2 at 10,000 t/y, other common nanoparticles at 100–1000 t/y; Australia had an estimated 5,489.3 tonnes of tyre rubber released in 2016, with up to 549 tonnes as airborne PM10; the paper also cites a study in which 97% of 149 watershed sediment samples contained nanoparticles.
## Methods
- Narrative literature review of research on nanomaterials in construction materials, with attention to future research needs for industry adoption.
- Sources were taken from peer-reviewed journals, textbooks, and government publications; the review emphasized environmental and human health impacts, recycling of waste nanomaterials, and adoption barriers.
- Main analysis was a thematic synthesis across nanoparticle definitions, construction applications, environmental/social/economic benefits, risk assessment, health implications, environmental implications, and regulation.
## Limitations
- The paper states that limited scientific evidence exists to support or deny implementation of nanotechnology in construction, and that limited research is available on long-term environmental and human health effects.
- It also states that regulation and exposure information are incomplete or inconsistent, with minimal regulatory guidelines in some areas and limited understanding of long-term release and life-cycle exposure.
- Evident from the text: this is a review rather than a new empirical study, so its conclusions depend on the scope and quality of the cited literature.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
Verification
Claims the paper makes
11 Valid · 8 Not valid · 128 Not checked · 52 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“A study of 149 sediment samples collected from watersheds in the USA, France, and Japan demonstrated a 97% detection rate, with values ranging from <14–5800 ppm in dry weight.”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 8. Environmental Implications
What the sources say
- Disputedcites [90] Moerman J.W. Potts G.E. Analysis of metals leached from smoked cigarette litter Tob. Control. 2011 20 i30 i35 10.1136/tc.2010.040196 21504922 PMC3088461 sourceExperimental — accuracy not yet measured
The Methods section describes testing metal leachates from smoked cigarette butts and unsmoked cigarettes in aqueous solutions, not sediment samples collected from watersheds. The Results section reports concentrations in those leachates; it does not report the claimed 149 samples, 97% detection rate, or <14–5800 ppm dry-weight range. Page numbers are unavailable in our copy. (LLM, conf=0.85)
Checked by a reasoning model — may be wrong.
boostedn = 149- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“It may cause failure of the hot mix asphalt layers due to the infiltration of water in the pavement structure. This can cause a loss of stiffness, durability, and strength [41,42].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 4. Nanoparticles in Construction Materials > 4.2. Asphalt Concrete
What the sources say
- Not checked — no full text of the sourcecites [41] Nejad F.M. Azarhoosh A. Hamedi G. Azarhoosh M. Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt Constr. Build. Mater. 2012 31 384 388 10.1016/j.conbuildmat.2012.01.004 source
- Could not verifycites [42] Jin J. Chen B. Liu L. Liu R. Qian G. Wei H. Zheng J. A Study on Modified Bitumen with Metal Doped Nano-TiO2 Pillared Montmorillonite Materials 2019 12 1910 10.3390/ma12121910 PMC6631065 31200547 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses pavement problems associated with bitumen’s rheological performance and aging resistance, while the Methods and Results passages address high-temperature behavior and UV aging. Searches for moisture damage, water infiltration, and loss of stiffness, durability, or strength found no passage addressing the claimed mechanism. (LLM, conf=0.72)
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
Every source the paper cites for this claim was checked and supports it.
In the paper
“The results show that a 5% inclusion of nano-clay can develop a compressive strength 4.8 times that of normal clay bricks [46].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 4. Nanoparticles in Construction Materials > 4.3. Bricks
What the sources say
- Supportedcites [46] Niroumand H. Zain M. Alhosseini S.N. The Influence of Nano-clays on Compressive Strength of Earth Bricks as Sustainable Materials Procedia-Soc. Behav. Sci. 2013 89 862 865 10.1016/j.sbspro.2013.08.945 source
Section 3.2 states that the tested earth bricks contained 5% nano-clay, and Table 1 gives the corresponding mixture. The Conclusion reports compressive strength 4.8 times that of normal earth bricks; the 14-day values in Section 3.2 are consistent with that ratio. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Inflammation was evidenced by increased polymorphonuclear leukocytes (PMN), macrophages, and lymphocytes”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 7. Health Implications > 7.1. Pulmonary Exposure
What the sources say
- Partly supportedcites [84] Gillespie P.A. Kang G.S. Elder A. Gelein R. Chen L. Moreira A.L. Koberstein J. Tchou-Wong K.-M. Gordon T. Chen L.C. Pulmonary response after exposure to inhaled nickel hydroxide nanoparticles: short and long-term studies in mice Nanotoxicology 2010 4 106 119 10.3109/17435390903470101 20730025 PMC2922767 sourceExperimental — accuracy not yet measured
The Results (Biological Response; page not available) report significantly increased neutrophil (PMN) and lymphocyte populations after three and five months of exposure. Macrophages were counted, and a marker of their phagocytic activity increased after five months, but the passages do not report an increase in macrophage numbers. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Inhalation is a primary mode of transfer for nanoparticles into the body, raising concerns of pulmonary carcinogenic reactions similar to that caused by asbestos where inhaled minute crystalline fibres induce asbestosis, lung cancer, pleural fibrosis, and mesothelioma [78].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 7. Health Implications > 7.1. Pulmonary Exposure
What the sources say
- Partly supportedcites [78] Donaldson K. Seaton A. A short history of the toxicology of inhaled particles Part. Fibre Toxicol. 2012 9 13 10.1186/1743-8977-9-13 22559156 PMC3436721 sourceExperimental — accuracy not yet measured
The Abstract defines the paper’s scope as accidental inhalation of particles, and the Nanoparticle toxicology section discusses lung effects of carbon nanotubes. The section on dust-related occupational lung disease also describes inhaled asbestos fibres and the listed diseases. But the paper does not establish that inhalation is a primary route by which nanoparticles enter the body relative to other routes. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
89 more claims · 6 with their cited sources checked
Create a free account to see all 199 claims and to verify the 35 references still open.
- Probably not a substantial claim. 47
- It may state two separate claims as one. 75
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Self-check results appear here once an independent check has confirmed them.
Cited works that were retracted
Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“Hong, 2017, Retracted: Chronic nasal exposure to nanoparticulate TiO2 causes pulmonary tumorigenesis in male mice, Environ. Toxicol., 32, 1651, 10.1002/tox.22393”
Cited work 10.1002/tox.22393 · retracted 2018-10-15 · notice 10.1002/tox.22667 · this paper published 2019-09-20
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“Supplementary cementitious materials are generally added in the manufacturing of concrete as a replacement for more expensive clinker, and chemical admixtures are added for specific applications to enhance the properties of concrete [15].”
Cited work 10.1016/j.enbuild.2011.02.018 · retracted 2019-07-01 · notice 10.1016/j.enbuild.2011.02.018 · this paper published 2019-09-20
Citations
Cites
2 retracted
RETRACTED: Al2O3 nanoparticles in concrete and different curing media
Nazari, A., & Riahi, S. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.018 · Cited by 145 · cited 2×
“Supplementary cementitious materials are generally added in the manufacturing of concrete as a replacement for more expensive clinker, and chemical admixtures are added for specific applications to enhance the properties of concrete [15].”
BackgroundRetractedHong, F., Ji, L., Zhou, Y., & Wang, L. (2017) · Environmental Toxicology · doi:10.1002/tox.22393 · Cited by 11
RetractedNanotechnology in the real world: Redeveloping the nanomaterial consumer products inventory
Vance, M. E., Kuiken, T., Vejerano, E. P., McGinnis, S. P., Hochella, M. F., Rejeski, D., & Hull, M. S. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.181 · Cited by 1,785
Karlsson, H. L., Cronholm, P., Gustafsson, J., & Möller, L. (2008) · Chemical Research in Toxicology · doi:10.1021/tx800064j · Cited by 1,480
Sustainability in the construction industry: A review of recent developments based on LCA
Ortiz, O., Castells, F., & Sonnemann, G. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.11.012 · Cited by 1,340 · cited 1×
“These are the issues that need to be considered when choosing materials for projects, which stem from the idea of whole life cycle costing in an effort to promote sustainable development and reduce the wastage of materials across the entire life of the structure [16].”
BackgroundSilver nanoparticle applications and human health
Ahamed, M., AlSalhi, M. S., & Siddiqui, M. K. J. (2010) · Clinica Chimica Acta · doi:10.1016/j.cca.2010.08.016 · Cited by 1,298
Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world
Piccinno, F., Gottschalk, F., Seeger, S., & Nowack, B. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1109-9 · Cited by 1,280 · cited 3×
“Available data on nanoparticle production is scarcely available, with companies unwilling to provide information regarding production volumes or production capacities [25].”
BackgroundInfluentialIn vitro toxicity of silica nanoparticles in human lung cancer cells
Lin, W., Huang, Y.-W., Zhou, X.-D., & Ma, Y. (2006) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2006.10.004 · Cited by 852
Lee, J., Mahendra, S., & Alvarez, P. J. J. (2010) · ACS Nano · doi:10.1021/nn100866w · Cited by 750 · cited 2×
“Once nanomaterials are released into the environment they may experience distinctive chemical, biological, and physical transformations, which may result in a change in their properties [8].”
BackgroundKonsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.007 · Cited by 683 · cited 2×
“The addition of CNTs to concrete can make concrete impenetrable to salts and water, therefore significantly enhancing the durability properties of concrete [35].”
Background
Research works printed but not linked: 6
- Rae A. Real life applications of nanotechnology in electronics OnBoard Technol. 2006 2006 28
- Strambeanu N. Demetrovici L. Dragos D. Nanoparticles’ Promises and Risks: Characterization Manipulation, Potential Hazards to Humanity the Environment Springer Cham, Switzerland 2015 9 19
- Khitab A. Tausif Arshad M. Nano construction materials Adv. Mater. Sci. 2014 38 181 189
- Lee J. Mahendra S. Alvarez P. Bittnar Z. Bartos P.J. Němeček J. Nanotechnology in Construction 3: Proceedings of the NICOM3 Springer Prague, Czech Republic 2009 1 435
- Marianne G. Cellulose Plastics Brydson’s Plastics Materials Elsevier Oxford, UK 2017 617
- Veiseh S. Yousefi A.A. The use of polystyrene in lightweight brick production Iranian Polym. J. 2003 12 323 330
Cited by
Ali, M. H., Azad, M. A. K., Khan, K. A., Rahman, M. O., Chakma, U., & Kumer, A. (2023) · ACS Omega · doi:10.1021/acsomega.3c01261 · Cited by 317
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Onaizi, A. M., Huseien, G. F., Lim, N. H. A. S., Amran, M., & Samadi, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124850 · Cited by 202
Mishra, T., Mandal, P., Rout, A. K., & Sahoo, D. (2022) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2022.100298 · Cited by 181
Principles of green chemistry: building a sustainable future
Kurul, F., Doruk, B., & Topkaya, S. N. (2025) · Discover Chemistry · doi:10.1007/s44371-025-00152-9 · Cited by 185
“Nanoparticles are utilized in a wide range of fields, including materials and manufacturing [80], environmental and energy sectors [81], and the textile industry [82], where they enhance strength, durability, and functional properties.”
Mohajerani, A., & Karabatak, B. (2020) · Waste Management · doi:10.1016/j.wasman.2020.04.021 · Cited by 163
Self-citationYoon, J., Shin, M., Lee, T., & Choi, J. (2020) · Materials · doi:10.3390/ma13020299 · Cited by 154
“Due to their small diameter, NP pos ess exceptional properti that do not app ar n the bulk p od ct [36,37].”
BackgroundNanomaterials for food packaging applications: A systematic review
Emamhadi, M. A., Sarafraz, M., Akbari, M., Thái, V. N., Fakhri, Y., Linh, N. T. T., & Khaneghah, A. M. (2020) · Food and Chemical Toxicology · doi:10.1016/j.fct.2020.111825 · Cited by 137
Nanoparticle Effects on Stress Response Pathways and Nanoparticle–Protein Interactions
Cameron, S. J., Sheng, J., Hosseinian, F. S., & Willmore, W. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23147962 · Cited by 137
Kishore, K., Pandey, A., Wagri, N. K., Saxena, A., Patel, J. B., & Al‐Fakih, A. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02265 · Cited by 142
Thambirajoo, M., Maarof, M., Lokanathan, Y., Katas, H., Ghazalli, N. F., Tabata, Y., & Fauzi, M. B. (2021) · Antibiotics · doi:10.3390/antibiotics10111338 · Cited by 106
“Moreover, other industries also highly exploit the use of NPs such as personal care products, electronics devices, buildings, and building materials [7].”
BackgroundRecent Advancements in the Nanomaterial Application in Concrete and Its Ecological Impact
Saleem, H., Zaidi, S. M. J., & Alnuaimi, N. A. (2021) · Materials · doi:10.3390/ma14216387 · Cited by 110
Review—Multifunctional Copper Nanoparticles: Synthesis and Applications
Bhagat, M., Anand, R., Sharma, P., Rajput, P., Sharma, N., & Singh, K. (2021) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/ac07f8 · Cited by 84
Rheological properties of asphalt binder modified by nano-TiO2/ZnO and basalt fiber
Fu, Z., Tang, Y., Ma, F., Wang, Y., Shi, K., Dai, J., Hou, Y., & Li, J. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126323 · Cited by 73
Recent advances in nanotechnology
Kumar, S. M., Rajni, Y., & Prasad, T. S. (2023) · International Journal of Nanomaterials Nanotechnology and Nanomedicine · doi:10.17352/2455-3492.000053 · Cited by 78
Kışla, D., Gökmen, G. G., Evrendilek, G. A., Akan, T., Vlčko, T., Kulawik, P., Jambrak, A. R., & Özoğul, F. (2023) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2023.03.019 · Cited by 81
Toxicity, bioaccumulation, and transformation of silver nanoparticles in aqua biota: a review
Banu, A. N., Kudesia, N., Raut, A. M., Pakrudheen, I., & Wahengbam, J. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01304-w · Cited by 74
Gomez-Villalba, L. S., Salcines, C., & González, R. F. (2023) · Nanomaterials · doi:10.3390/nano13091454 · Cited by 75
An insight into impact of nanomaterials toxicity on human health
Qamar, W., Gulia, S., Athar, M., Ahmad, R., Imam, M. T., Chandra, P., Singh, B. P., Haque, R., Hassan, M. I., & Rahman, S. (2024) · PeerJ · doi:10.7717/peerj.17807 · Cited by 70
“…for nanomaterials have been established historically by epidemiological and clinical studies on naturally occurring fi bers and particles such as asbestos and silica ( Ahmad, Mishra & Sardar, 2014b ; Alam et al., 2018 ; Ghosh, Ahmad & Khare, 2019 ; Hillegass et al., 2010 ; Mohajerani et al., 2019 ).”
BackgroundIn situ synthesized nano-Al4C3 reinforced aluminum matrix composites via friction stir processing
Li, X., Zhang, Z., Peng, Y. L., et al. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.109 · Cited by 52
Olejnik, M., Kersting, M., Rosenkranz, N., Loza, K., Breisch, M., Rostek, A., Prymak, O., Schürmeyer, L., Westphal, G., Köller, M., et al. (2020) · Cell Biology and Toxicology · doi:10.1007/s10565-020-09571-z · Cited by 51
Production and therapeutic use of astaxanthin in the nanotechnology era
Abdelazim, K., Ghit, A., Assal, D., Dorra, N., Noby, N., Khattab, S. N., Feky, S. E. E., & Hussein, A. (2023) · Pharmacological Reports · doi:10.1007/s43440-023-00488-y · Cited by 56
Green Nanomaterials for Smart Textiles Dedicated to Environmental and Biomedical Applications
Popescu, M., & Ungureanu, C. (2023) · Materials · doi:10.3390/ma16114075 · Cited by 52
Electrochemical Synthesis of Unique Nanomaterials in Ionic Liquids
Lebedeva, O. K., Kultin, D., & Kustov, L. M. (2021) · Nanomaterials · doi:10.3390/nano11123270 · Cited by 58
“Titanium oxide nanostructures find diverse applications, for example, in photocatalysis, solar energy harvesting and conversion, sensors, construction materials [7] and for radio-frequency ceramics.”
BackgroundInfluentialChlumsky, O., Purkrtová, S., Míchová, H., Sýkorová, H., Slepička, P., Fajstavr, D., Ulbrich, P., Viktorová, J., & Demnerová, K. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22157892 · Cited by 52
“The alteration of NPs’ size and shape changes their properties on the atomic level and has the potential to design their optimal physicochemical, optical and biological properties for various applications [32,34].”
BackgroundSujitha, V. S., Ramesh, B., & Xavier, J. R. (2024) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2024.2354093 · Cited by 61
de Maria, V. P. K., de Paiva, F. F. G., Tamashiro, J. R., Silva, L. H. P., Pinho, G. D. S., Rubio‐Marcos, F., & Kinoshita, Â. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135337 · Cited by 64
Kowalczyk, T., Merecz-Sadowska, A., Rijo, P. M., Mori, M., Hatziantoniou, S., Górski, K. M., Szemraj, J., Piekarski, J. H., Śliwiński, T., Bijak, M., et al. (2022) · Cancers · doi:10.3390/cancers14061455 · Cited by 52
“Compounds of plant origin (pure compounds or extracts) have been used in combination with nanoparticles and with chemotherapeutic agents in adjunctive therapies [75,76].”
BackgroundApplication of nanoparticles for enhanced UV-B stress tolerance in plants
Soni, S., Jha, A. B., Dubey, R. S., & Sharma, P. (2022) · Plant Nano Biology · doi:10.1016/j.plana.2022.100014 · Cited by 46
Research Development in Silica Aerogel Incorporated Cementitious Composites—A Review
Ślosarczyk, A., Vashchuk, A., & Kłapiszewski, Ł. (2022) · Polymers · doi:10.3390/polym14071456 · Cited by 49
Keshavarzian, F., Saberian, M., & Li, J. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102601 · Cited by 45
Kishore, K., Sheikh, M. N., & Hadi, M. N. S. (2024) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2024.105774 · Cited by 50
An insight into endophytic antimicrobial compounds: an updated analysis
Digra, S., & Nonzom, S. (2023) · Plant Biotechnology Reports · doi:10.1007/s11816-023-00824-x · Cited by 51
Subtoxic cell responses to silica particles with different size and shape
Kersting, M., Olejnik, M., Rosenkranz, N., Loza, K., Breisch, M., Rostek, A., Westphal, G., Bünger, J., Ziegler, N., Ludwig, A., et al. (2020) · Scientific Reports · doi:10.1038/s41598-020-78550-5 · Cited by 49
Application of nanomaterials in civil engineering
Utsev, T. J., Tıza, M. T., Mogbo, O. N., Singh, S. K., Chakravarti, A., Shaik, N., & Singh, S. P. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.02.480 · Cited by 42
Makgabutlane, B., Maubane-Nkadimeng, M. S., Coville, N. J., & Mhlanga, S. D. (2022) · Results in Chemistry · doi:10.1016/j.rechem.2022.100405 · Cited by 50
The Impact of Nanoparticles on Innate Immune Activation by Live Bacteria
Swartzwelter, B. J., Fux, A. C., Johnson, L., Swart, E., Hofer, S., Hofstätter, N., Geppert, M., Italiani, P., Boraschi, D., Duschl, A., et al. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21249695 · Cited by 46
Tanimola, J. O., & Efe, S. (2024) · Applications in Engineering Science · doi:10.1016/j.apples.2024.100189 · Cited by 77
Effect of Iron Oxide Nanoparticles on the Physical Properties of Medium Density Fiberboard
Gul, W., Alrobei, H., Shah, S. R. A., & Khan, A. H. (2020) · Polymers · doi:10.3390/polym12122911 · Cited by 42
“Nanotechnology is science, engineering, and technology conducted at the nanoscale, which is about 1 to 100 nanometers [16].”
BackgroundInfluentialTransformative Impacts of Nanotechnology on Sustainable Construction: A Comprehensive Review
Firoozi, A. A., Firoozi, A. A., & Maghami, M. R. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104973 · Cited by 56
Recent Insights and Multifactorial Applications of Carbon Nanotubes
Thiruvengadam, M., Rajakumar, G., Swetha, V., Ansari, M. A., Alghamdi, S. A., Almehmadi, M. M., Halawi, M., Kungumadevi, L., Raja, V., Sabura, S. S., et al. (2021) · Micromachines · doi:10.3390/mi12121502 · Cited by 40
“evaluated the unique features of nanostructured materials that have sparked attention in industry and research [20].”
BackgroundMeda, U. S., Vora, K., Athreya, Y., & Mandi, U. A. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.03.066 · Cited by 44
Sibiya, N. P., Mahlangu, T. P., Tetteh, E. K., & Rathilal, S. (2024) · Cleaner Chemical Engineering · doi:10.1016/j.clce.2024.100137 · Cited by 46
Zhao, C., Chu, P., Tang, X., et al. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131719 · Cited by 36
Harper, C. C., Miller, Z. M., McPartlan, M. S., Jordan, J. S., Pedder, R. E., & Williams, E. R. (2023) · ACS Nano · doi:10.1021/acsnano.3c00539 · Cited by 40
Elizondo-Villarreal, N., Martínez, E. G., Méndez, M. G., Gracia-Pinilla, M. A., Guzmán-Hernández, A. M., Castaño, V. M., & Gómez-Rodríguez, C. (2024) · Coatings · doi:10.3390/coatings14070919 · Cited by 41
“…attention for creating new materials or new compounds, all at the nanometer scale, with amazing new properties for developing innovative applications with great potential, so they are explored for application in industries such as the environment, water, food, biomedical, and space industries [1].”
BackgroundChen, Z., Yang, Y.-C., Wang, B.-J., Cheng, F., Lee, Y.-L., Lee, Y., & Wang, Y. (2022) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2022.113967 · Cited by 36
Ayub, J., Saeed, M. U., Hussain, N., Zulfiqar, I., Mehmood, T., Iqbal, H. M. N., & Bilal, M. (2022) · Topics in Catalysis · doi:10.1007/s11244-022-01657-8 · Cited by 36
Behera, M., Tiwari, N., Banerjee, S., Sheik, A. R., Kumar, M., Pal, M., Pal, P., Chatterjee, R. P., Chakrabortty, S., & Tripathy, S. K. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.128616 · Cited by 35
Sisman, M., Teomete, E., Yanık, J., & Malayoğlu, U. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135040 · Cited by 36
Arabani, M., Shalchian, M. M., & Payan, M. (2025) · Road Materials and Pavement Design · doi:10.1080/14680629.2025.2454019 · Cited by 37
“The classical framework of geoscience divides soil particles into four groups of gravel, sand, silt, and clay; however, with these ranges, nanoscale particle behaviour is difficult to grasp (Mohajerani et al., 2019).”
Recent Progress in the Green Synthesis, Characterization, and Applications of Selenium Nanoparticles
Ibrahim, S. S. S., Ansari, Y., Puri, A. V., Patil, V. V., Gaikwad, S. S., & Haroon, R. A. (2024) · BIO Integration · doi:10.15212/bioi-2024-0063 · Cited by 32
“The first step in the top-down approach involves converting larger structures into nano-sized materials [30].”
BackgroundBrzozowski, P., Strzałkowski, J., Rychtowski, P. S., Wróbel, R. J., Tryba, B. A., & Horszczaruk, E. (2021) · Materials · doi:10.3390/ma15010166 · Cited by 38
“The nanoparticles most often applied to the cement-based materials are nanometals (nanosilver, nanogold, nanocopper, nanoplatinum, nanopalladium), carbon nanostructures, like nanotubes or fullerenes, titanium dioxide (TiO2), silicon dioxide (SiO2), and zirconium dioxide [10,11].”
BackgroundVessella, T., Zhang, H., Zhou, Z., Cui, F., & Zhou, H. S. (2023) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2023.115512 · Cited by 32
Tang, Y., Fu, Z., Ma, F., et al. (2023) · International Journal of Pavement Engineering · doi:10.1080/10298436.2023.2211212 · Cited by 31
“The use of carbon nanomaterials-modi fi ed asphalt binder has become a more and more prevalent in transportation materials and engineering (Mohajerani et al .”
BackgroundBiomedical and environmental applications via nanobiocatalysts and enzyme immobilization
Fahim, Y. A., Ragab, W. M., Hasani, I. W., & El‐Khawaga, A. M. (2025) · European journal of medical research · doi:10.1186/s40001-025-02782-2 · Cited by 45
“A comprehensive and systematic comprehension of the interactions between nanomaterials and cells, tissues, and proteins is necessary for the safe design and commercialization of nanotechnology [162].”
Nanotechnology in Societal Development
Tawiah, B., Ofori, E. A., & George, S. C. (2024) · Advanced technologies and societal change · doi:10.1007/978-981-97-6184-5_1 · Cited by 61
Mining wastes to improve bitumen performances: An example of circular economy
Calandra, P., Quaranta, S., Figueira, B. A. M., et al. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.01.106 · Cited by 30
Imoisili, P. E., & Jen, T. (2022) · Nanotechnology Reviews · doi:10.1515/ntrev-2022-0476 · Cited by 34
In Silico Prediction of Protein Adsorption Energy on Titanium Dioxide and Gold Nanoparticles
Alsharif, S. A., Power, D., Rouse, I., & Lobaskin, V. (2020) · Nanomaterials · doi:10.3390/nano10101967 · Cited by 28
“Furthermore, humans are constantly exposed to NPs from unintentional sources, including exhaust fumes from internal combustion engines [3], construction sites [4] and waste processing [5].”
BackgroundMeng, Y., Feng, Y., Bai, X. D., Yu, Q., Zhou, J., & Wang, J. (2025) · Current Plant Biology · doi:10.1016/j.cpb.2025.100492 · Cited by 35
High Yield Silica-Based Emerging Nanoparticles Activities for Hybrid Catalyst Applications
Nath, N., Chakroborty, S., Panda, P., & Pal, K. (2022) · Topics in Catalysis · doi:10.1007/s11244-022-01623-4 · Cited by 28
“Nanomaterial has gained significance in the galaxy of research and development and has also caught the eyes of industrial and pharmaceutical persons throughout the world [3, 4].”
BackgroundIn Vitro and In Vivo Models to Assess the Immune-Related Effects of Nanomaterials
Boraschi, D., Li, D., Li, Y., & Italiani, P. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph182211769 · Cited by 33
Chan, Y.-J., Liao, P.-L., Tsai, C.-H., Cheng, Y.-W., Lin, F., Ho, J., Chen, C., & Li, C.-H. (2021) · Particle and Fibre Toxicology · doi:10.1186/s12989-020-00395-7 · Cited by 29
“Thus, TiO2 nanoparticles (TiO2-NPs) are more commonly used in sunscreen formulations [1, 2].”
BackgroundFerreira, M. T. H. A., Soldado, E., Borsoi, G., Mendes, M. P., & Flores‐Colen, I. (2023) · Applied Sciences · doi:10.3390/app132312896 · Cited by 31
An Overview of Micro- and Nano-Dispersion Additives for Asphalt and Bitumen for Road Construction
Korniejenko, K., Nykiel, M., Choińska, M., et al. (2023) · Buildings · doi:10.3390/buildings13122948 · Cited by 28
“Their application can be also an answer to the trends connected with the reduction in environmental burden [1,3].”
BackgroundKatzourakis, V. E., & Chrysikopoulos, C. V. (2023) · Advances in Water Resources · doi:10.1016/j.advwatres.2023.104475 · Cited by 28
Metal nanoparticles: biomedical applications and their molecular mechanisms of toxicity
Malik, A., Khan, J. M., Alhomida, A. S., Ola, M. S., Alshehri, M. A., & Ahmad, A. (2022) · Chemical Papers · doi:10.1007/s11696-022-02351-5 · Cited by 29
la Garza, D. A. A.-D., Guzmán, A. M., Gómez-Rodríguez, C., et al. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.140 · Cited by 27
NANOTECHNOLOGIES IN CONSTRUCTION
BALAN, O. S. (2021) · Ukrainian Journal of Civil Engineering and Architecture · doi:10.30838/j.bpsacea.2312.261021.7.796 · Cited by 27
Rajeswari, V. D., Eed, E. M., Elfasakhany, A., Badruddin, I. A., Kamangar, S., & Brindhadevi, K. (2021) · Applied Nanoscience · doi:10.1007/s13204-021-02065-2 · Cited by 37
One Step In-Situ Synthesis of Zinc Oxide Nanoparticles for Multifunctional Cotton Fabrics
Javed, A., Wiener, J., Tamulevičienė, A., Tamulevičius, T., Lazauskas, A., Šašková, J., & Račkauskas, S. (2021) · Materials · doi:10.3390/ma14143956 · Cited by 30
Environmental Applications of Green Engineered Copper Nanoparticles
Manjula, N. G., Sarma, G., Shilpa, B. M., et al. (2022) · doi:10.1007/978-981-19-4811-4_12 · Cited by 26
Bazina, L., Bitounis, D., Cao, X., DeLoid, G. M., Parviz, D., Strano, M. S., Lin, H. G., Bell, D. C., Thrall, B. D., & Demokritou, P. (2021) · Environmental Science Nano · doi:10.1039/d1en00594d · Cited by 27
Parashar, S., Raj, S., Srivastava, P., & Singh, A. K. (2024) · Journal of Pharmacological and Toxicological Methods · doi:10.1016/j.vascn.2024.107563 · Cited by 26
Hussain, S. M., Naeem, E., Ali, S., et al. (2023) · Journal of Animal Physiology and Animal Nutrition · doi:10.1111/jpn.13898 · Cited by 25
Rao, M. V., Sivagamasundari, R., & Nagaraju, T. V. (2023) · Cleaner Materials · doi:10.1016/j.clema.2023.100198 · Cited by 38
Antibacterial studies of ZnO and silica capped manganese doped zinc sulphide nanostructures
Kumar, S., Jain, A., Panwar, S., Sharma, I., Gupta, S., Dopita, M., & Choubey, R. K. (2023) · Applied Physics A · doi:10.1007/s00339-023-06463-x · Cited by 25
Li, A., Yao, J., Li, N., Shi, C., Bai, M., Wang, Z., Hrynsphan, D., Savitskaya, T., & Chen, J. (2024) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2024.2386086 · Cited by 29
“…has found widespread application in both industrial production and consumer goods, contributing to escalating discharges into terrestrial and aquatic environments, thereby potentially impacting human health and the ecosystem (Mohajerani et al., 2019; M. Wu et al., 2022; Xiang et al., 2021).”
Thomas, N. A., Puluhulawa, L. E., Mo’o, F. R. C., Rusdin, A., Gazzali, A. M., & Budiman, A. (2024) · Polymers · doi:10.3390/polym16152151 · Cited by 31
“While the benefits are indeed impressive, ongoing studies continue exploring matters such as long-term safety profiles, reproducibility at greater scales, and the ability to expand the approach [79].”
BackgroundMirshekar, A., Kargar, P. G., Bagherzade, G., & Beyzaei, H. (2024) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2024.112455 · Cited by 24
Medicinal Plant-Based Nanoparticle Synthesis and their Diverse Applications
Chowdhury, S. S., Ibnat, N., Hasan, M., & Ghosh, A. (2024) · Springer eBooks · doi:10.1007/978-981-97-4292-9_10 · Cited by 30
Photosynthesis governed by nanoparticulate titanium dioxide. The Pisum sativum L. case study
Skiba, E., Pietrzak, M., Michlewska, S., Gruszka, J., Malejko, J., Godlewska‐Żyłkiewicz, B., & Wolf, W. M. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.122735 · Cited by 33
Kumari, P. P., & Mulky, L. (2024) · Journal of Bio- and Tribo-Corrosion · doi:10.1007/s40735-024-00863-z · Cited by 30
“Nanomaterials and nano-coatings offer unique properties that can provide improved protection and durability compared to traditional materials [120, 121].”
Shumuye, E. D., Mehrpay, S., Fang, G., et al. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108782 · Cited by 23
Wang, F., Al‐Mdallal, Q. M., Famakinwa, O. A., et al. (2023) · Alexandria Engineering Journal · doi:10.1016/j.aej.2023.03.028 · Cited by 23
Regulatory and Safety Concerns Regarding the Use of Active Nanomaterials in Food Industry
Singh, R., & Kumar, S. (2023) · Springer eBooks · doi:10.1007/978-981-99-5045-4_8 · Cited by 27
Singh, S., Maurya, P. K., Karmakar, A., Maurya, P. K., Pandey, N., Kumar, S., & Gupta, T. (2025) · Environmental Geochemistry and Health · doi:10.1007/s10653-025-02566-x · Cited by 34
“NMs extracted from mining tailings offer significant ability for a large range of industrial applications, but their development must prioritize environmental safety and economic feasibility (Mohajerani et al., 2019).”
Medicinal Use of Chicory (Cichorium intybus L.)
Duda, Ł., Kłosiński, K. K., Budryn, G., Jaśkiewicz, A., Kołat, D., Kałuzińska‐Kołat, Ż., & Pasieka, Z. W. (2024) · Scientia Pharmaceutica · doi:10.3390/scipharm92020031 · Cited by 26
“Secondary metabolites are typically present in plants at lower levels than those needed for therapeutic properties; nevertheless, it is feasible to enhance the bioavailability of medicinal substances to maintain low dosages [12,13].”
BackgroundSynthesis and characterization of amorphous nano silica from South African coal fly ash
Imoisili, P. E., & Jen, T. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.06.077 · Cited by 22
Bessa, M. J., Brandão, F., Fokkens, P. H. B., Leseman, D. L. A. C., Boere, A. J. F., Cassee, F. R., Salmatonidis, A., Viana, M., Vulpoi, A., Şimon, S., et al. (2021) · Nanomaterials · doi:10.3390/nano11123225 · Cited by 29
“Carbon-based nanomaterials (NM), metal and metal oxide nanoparticles (NP) are amongst the most used ENM in the industrial sector, which are consequently being produced in high volumes [1,2].”
BackgroundAbdulraheem, M. I., Moshood, A. Y., Zang, Y., Mawof, A., Zhang, Y., Raghavan, V., & Hu, J. (2025) · Food Biophysics · doi:10.1007/s11483-025-09953-y · Cited by 26
Ebrahim, A., Kandasamy, S., Isleem, H. F., et al. (2024) · Fullerenes Nanotubes and Carbon Nanostructures · doi:10.1080/1536383x.2024.2445668 · Cited by 21
“…and each of them has its effect on construction materials like carbon nano-tubes (CNT), titanium dioxide nanoparticles (TiO 2 ), nano clay, etc. [18] Nanoparticles have a significant influence due to their unique properties and behaviors on the nanoscale; they enhance material properties,…”
Food additives for the synthesis of metal nanoparticles: a review
Ganasan, E., Yusoff, H. M., Azmi, A. A., Chia, P. W., Lam, S. S., Kan, S., Liew, R. K., Venkateswarlu, K., & Teo, C. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01473-2 · Cited by 21
Tschiche, H. R., Bierkandt, F. S., Creutzenberg, O., Fessard, V., Franz, R., Giese, B., Greiner, R., Haas, K., Haase, A., Hartwig, A., et al. (2022) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2022.100707 · Cited by 22
Integrated approaches to testing and assessment for grouping nanomaterials following dermal exposure
Cristo, L. D., Janer, G., Dekkers, S., Boyles, M. S. P., Giusti, A., Keller, J. G., Wohlleben, W., Braakhuis, H., Ma‐Hock, L., Oomen, A. G., et al. (2022) · Nanotoxicology · doi:10.1080/17435390.2022.2085207 · Cited by 21
“Skin exposure to nanomaterials (NMs) or nanoforms (NFs) may occur through the intentional use of con- sumer products (e.g. cosmetics, sunscreens, and wound dressing) and therapeutic applications (e.g. drug delivery) or unintentionally, including occupa- tional settings, where NFs are manufactured, used or handled (e.g…”
BackgroundGreen nanotechnology for the environment
Raja, R. K., Hazır, S., Balasubramani, G., Sivaprakash, G., Obeth, E. S. J., Thulasinathan, B., Pugazhendhi, A., Raj, R. H. K., & Arun, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823426-6.00006-1 · Cited by 25
Javed, A., Azeem, M., Wiener, J., Thukkaram, M., Šašková, J., & Mansoor, T. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0051-9 · Cited by 28
Green nanoparticles in agriculture: Enhancing crop growth and stress tolerance
YingYing, J., Balasubramanian, B., Park, S., et al. (2025) · Plant Stress · doi:10.1016/j.stress.2025.101017 · Cited by 20
Arpitha, B. J., & Parthasarathy, P. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.03.708 · Cited by 24
Metadata
- Authors
- Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A.
- Affiliations
- RMIT University (AU)
- Swinburne University of Technology (AU)
- Suranaree University of Technology (TH)
- Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), Batu Pahat 86400, Johor, Malaysia
- Corresponding author
- Mohajerani, Abbas
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-09-20
- Volume
- 12
- Issue
- 19
- Pages
- 3052
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC6804222
- OpenAlex
- W2973574987
- Semantic Scholar
- d48655bed2cb6fe97f2fe8f3e610ebc4048a8b6b
- Cited by
- 348
- References
- 95
- Citations by year
- 2026: 27 · 2025: 73 · 2024: 75 · 2023: 58 · 2022: 56 · 2021: 42 · 2020: 17
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RMIT Research Repository (RMIT University Library) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion, cc-by)
- Swinburne figshare (Swinburne University of Technology) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Materials Science › General Materials Science › Nanotechnology research and applications
- Physical Sciences › Materials Science › Materials Chemistry › Nanoparticles: synthesis and applications
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Keywords
- nanoparticles, building materials, nanomaterials, titanium dioxide, carbon nanotubes, silica nanoparticles, nanoclay, Al2O3 nanoparticles, concrete, asphalt mixtures, brick, timber, steel, environmental risk, human health risk, nanoparticle exposure, nanotechnology regulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
![Figure 1 SEM micrographs of plain (A) and nano-silica modified cement paste (B) [32].](https://figures.cochat.ai/paper-figures/a77f45bc16c346e5a69da1d5d040abd7/nanoparticles-in-construction-materials-and-other-applications-and-implications-figure-1.jpg)