Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Open accessThe DOI matches its Crossref record; 91 of the 95 references it cites were found in a registry or an index; 20 of the 155 sources its claims cite were checked for support.
Abstract
Nanoparticles are defined as ultrafine particles sized between 1 and 100 nanometres in diameter. In recent decades, there has been wide scientific research on the various uses of nanoparticles in construction, electronics, manufacturing, cosmetics, and medicine. The advantages of using nanoparticles in construction are immense, promising extraordinary physical and chemical properties for modified construction materials. Among the many different types of nanoparticles, titanium dioxide, carbon nanotubes, silica, copper, clay, and aluminium oxide are the most widely used nanoparticles in the construction sector. The promise of nanoparticles as observed in construction is reflected in other adoptive industries, driving the growth in demand and production quantity at an exorbitant rate. The objective of this study was to analyse the use of nanoparticles within the construction industry to exemplify the benefits of nanoparticle applications and to address the short-term and long-term effects of nanoparticles on the environment and human health within the microcosm of industry so that the findings may be generalised. The benefits of nanoparticle utilisation are demonstrated through specific applications in common materials, particularly in normal concrete, asphalt concrete, bricks, timber, and steel. In addition, the paper addresses the potential benefits and safety barriers for using nanomaterials, with consideration given to key areas of knowledge associated with exposure to nanoparticles that may have implications for health and environmental safety. The field of nanotechnology is considered rather young compared to established industries, thus limiting the time for research and risk analysis. Nevertheless, it is pertinent that research and regulation precede the widespread adoption of potentially harmful particles to mitigate undue risk.
Overview
CoChat Summary
## TL;DR
This is a narrative review of nanoparticles in construction materials, showing that they can improve properties of concrete, asphalt, bricks, timber, and steel while also raising health, environmental, and regulatory concerns. The paper argues that research and regulation have not kept pace with nanoparticle use, especially for exposure, disposal, and incidental nanoparticle generation.
## Key findings
- In concrete, nano-silica improved particle packing, increased cement hydration, reduced setting time and porosity, and increased early strength; nano-titania (TiO2) enabled self-cleaning/self-disinfecting effects, and carbon nanotubes improved pore filling and durability.
- In asphalt concrete, a 5% inclusion of nano-aluminium oxide (Al2O3) showed strong resistance to high temperatures, and nanoparticle modifiers were reported to greatly improve serviceability.
- In bricks, a 5% inclusion of nano-clay increased compressive strength to 4.8 times that of normal clay bricks; alkosiloxane with 1%–1.5% silica nanoparticles was reported as the most effective protective coating.
- The review reports several exposure and risk figures: 2012 voluntary production data showed TiO2 at 10,000 t/y, other common nanoparticles at 100–1000 t/y; Australia had an estimated 5,489.3 tonnes of tyre rubber released in 2016, with up to 549 tonnes as airborne PM10; the paper also cites a study in which 97% of 149 watershed sediment samples contained nanoparticles.
## Methods
- Narrative literature review of research on nanomaterials in construction materials, with attention to future research needs for industry adoption.
- Sources were taken from peer-reviewed journals, textbooks, and government publications; the review emphasized environmental and human health impacts, recycling of waste nanomaterials, and adoption barriers.
- Main analysis was a thematic synthesis across nanoparticle definitions, construction applications, environmental/social/economic benefits, risk assessment, health implications, environmental implications, and regulation.
## Limitations
- The paper states that limited scientific evidence exists to support or deny implementation of nanotechnology in construction, and that limited research is available on long-term environmental and human health effects.
- It also states that regulation and exposure information are incomplete or inconsistent, with minimal regulatory guidelines in some areas and limited understanding of long-term release and life-cycle exposure.
- Evident from the text: this is a review rather than a new empirical study, so its conclusions depend on the scope and quality of the cited literature.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
Verification
Claims the paper makes
11 Valid · 8 Not valid · 128 Not checked · 52 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“A study of 149 sediment samples collected from watersheds in the USA, France, and Japan demonstrated a 97% detection rate, with values ranging from <14–5800 ppm in dry weight.”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 8. Environmental Implications
What the sources say
- Disputedcites [90] Moerman, 2011, Analysis of metals leached from smoked cigarette litter, Tob. Control. sourceExperimental — accuracy not yet measured
The Methods section describes testing metal leachates from smoked cigarette butts and unsmoked cigarettes in aqueous solutions, not sediment samples collected from watersheds. The Results section reports concentrations in those leachates; it does not report the claimed 149 samples, 97% detection rate, or <14–5800 ppm dry-weight range. Page numbers are unavailable in our copy. (LLM, conf=0.85)
Checked by a reasoning model — may be wrong.
boostedn = 149- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“It may cause failure of the hot mix asphalt layers due to the infiltration of water in the pavement structure. This can cause a loss of stiffness, durability, and strength [41,42].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 4. Nanoparticles in Construction Materials > 4.2. Asphalt Concrete
What the sources say
- Not checked — no full text of the sourcecites [41] Nejad, 2012, Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt, Constr. Build. Mater. source
- Could not verifycites [42] Jin, J., Chen, B., Liu, L., Liu, R., Qian, G., Wei, H., and Zheng, J. (2019). A Study on Modified Bitumen with Metal Doped Nano-TiO2 Pillared Montmorillonite. Materials, 12. sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses pavement problems associated with bitumen’s rheological performance and aging resistance, while the Methods and Results passages address high-temperature behavior and UV aging. Searches for moisture damage, water infiltration, and loss of stiffness, durability, or strength found no passage addressing the claimed mechanism. (LLM, conf=0.72)
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
Every source the paper cites for this claim was checked and supports it.
In the paper
“The results show that a 5% inclusion of nano-clay can develop a compressive strength 4.8 times that of normal clay bricks [46].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 4. Nanoparticles in Construction Materials > 4.3. Bricks
What the sources say
- Supportedcites [46] Niroumand, 2013, The Influence of Nano-clays on Compressive Strength of Earth Bricks as Sustainable Materials, Procedia-Soc. Behav. Sci. source
Section 3.2 states that the tested earth bricks contained 5% nano-clay, and Table 1 gives the corresponding mixture. The Conclusion reports compressive strength 4.8 times that of normal earth bricks; the 14-day values in Section 3.2 are consistent with that ratio. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Inflammation was evidenced by increased polymorphonuclear leukocytes (PMN), macrophages, and lymphocytes”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 7. Health Implications > 7.1. Pulmonary Exposure
What the sources say
- Partly supportedcites [84] Gillespie, 2010, Pulmonary response after exposure to inhaled nickel hydroxide nanoparticles: short and long-term studies in mice, Nanotoxicology sourceExperimental — accuracy not yet measured
The Results (Biological Response; page not available) report significantly increased neutrophil (PMN) and lymphocyte populations after three and five months of exposure. Macrophages were counted, and a marker of their phagocytic activity increased after five months, but the passages do not report an increase in macrophage numbers. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Inhalation is a primary mode of transfer for nanoparticles into the body, raising concerns of pulmonary carcinogenic reactions similar to that caused by asbestos where inhaled minute crystalline fibres induce asbestosis, lung cancer, pleural fibrosis, and mesothelioma [78].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 7. Health Implications > 7.1. Pulmonary Exposure
What the sources say
- Partly supportedcites [78] Donaldson, 2012, A short history of the toxicology of inhaled particles, Part. Fibre Toxicol. sourceExperimental — accuracy not yet measured
The Abstract defines the paper’s scope as accidental inhalation of particles, and the Nanoparticle toxicology section discusses lung effects of carbon nanotubes. The section on dust-related occupational lung disease also describes inhaled asbestos fibres and the listed diseases. But the paper does not establish that inhalation is a primary route by which nanoparticles enter the body relative to other routes. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
89 more claims · 6 with their cited sources checked
Create a free account to see all 199 claims and to verify the 35 references still open.
- Probably not a substantial claim. 47
- It may state two separate claims as one. 75
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Self-check results appear here once an independent check has confirmed them.
Cited works that were retracted
Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“Hong, 2017, Retracted: Chronic nasal exposure to nanoparticulate TiO2 causes pulmonary tumorigenesis in male mice, Environ. Toxicol., 32, 1651, 10.1002/tox.22393”
Cited work 10.1002/tox.22393 · retracted 2018-10-15 · notice 10.1002/tox.22667 · this paper published 2019-09-20
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“Supplementary cementitious materials are generally added in the manufacturing of concrete as a replacement for more expensive clinker, and chemical admixtures are added for specific applications to enhance the properties of concrete [15].”
Cited work 10.1016/j.enbuild.2011.02.018 · retracted 2019-07-01 · notice 10.1016/j.enbuild.2011.02.018 · this paper published 2019-09-20
Citations
Cites
2 retracted
RETRACTED: Al2O3 nanoparticles in concrete and different curing media
Nazari, A., & Riahi, S. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.018 · Cited by 145 · cited 2×
“Supplementary cementitious materials are generally added in the manufacturing of concrete as a replacement for more expensive clinker, and chemical admixtures are added for specific applications to enhance the properties of concrete [15].”
BackgroundRetractedHong, F., Ji, L., Zhou, Y., & Wang, L. (2017) · Environmental Toxicology · doi:10.1002/tox.22393 · Cited by 11
RetractedNanotechnology in the real world: Redeveloping the nanomaterial consumer products inventory
Vance, M. E., Kuiken, T., Vejerano, E. P., McGinnis, S. P., Hochella, M. F., Rejeski, D., & Hull, M. S. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.181 · Cited by 1,785
Karlsson, H. L., Cronholm, P., Gustafsson, J., & Möller, L. (2008) · Chemical Research in Toxicology · doi:10.1021/tx800064j · Cited by 1,480
Sustainability in the construction industry: A review of recent developments based on LCA
Ortiz, O., Castells, F., & Sonnemann, G. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.11.012 · Cited by 1,340 · cited 1×
“These are the issues that need to be considered when choosing materials for projects, which stem from the idea of whole life cycle costing in an effort to promote sustainable development and reduce the wastage of materials across the entire life of the structure [16].”
BackgroundSilver nanoparticle applications and human health
Ahamed, M., AlSalhi, M. S., & Siddiqui, M. K. J. (2010) · Clinica Chimica Acta · doi:10.1016/j.cca.2010.08.016 · Cited by 1,298
Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world
Piccinno, F., Gottschalk, F., Seeger, S., & Nowack, B. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1109-9 · Cited by 1,280 · cited 3×
“Available data on nanoparticle production is scarcely available, with companies unwilling to provide information regarding production volumes or production capacities [25].”
BackgroundInfluentialIn vitro toxicity of silica nanoparticles in human lung cancer cells
Lin, W., Huang, Y.-W., Zhou, X.-D., & Ma, Y. (2006) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2006.10.004 · Cited by 852
Lee, J., Mahendra, S., & Alvarez, P. J. J. (2010) · ACS Nano · doi:10.1021/nn100866w · Cited by 750 · cited 2×
“Once nanomaterials are released into the environment they may experience distinctive chemical, biological, and physical transformations, which may result in a change in their properties [8].”
BackgroundKonsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.007 · Cited by 683 · cited 2×
“The addition of CNTs to concrete can make concrete impenetrable to salts and water, therefore significantly enhancing the durability properties of concrete [35].”
BackgroundMouse Models of Human Disease: An Evolutionary Perspective
Perlman, R. L. (2016) · Evolution, Medicine, and Public Health · doi:10.1093/emph/eow014 · Cited by 647
Hassellöv, M., Readman, J. W., Ranville, J. F., & Tiede, K. (2008) · Ecotoxicology · doi:10.1007/s10646-008-0225-x · Cited by 634 · cited 1×
“One of the main complications of nanotechnology is the identification and characterisation of nanomaterials and their aggregates [55].”
BackgroundNanotechnology in cosmetics: Opportunities and challenges
Raj, S., Jose, S., Sumod, U., & Sabitha, M. (2012) · Journal of Pharmacy And Bioallied Sciences · doi:10.4103/0975-7406.99016 · Cited by 545
Nanotechnology: Advantages and drawbacks in the field of construction and building materials
Pacheco-Torgal, F., & Jalali, S. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.07.009 · Cited by 528 · cited 1×
“Prior investigations have revealed that some nanoparticles can cause similar symptoms to that of asbestos fibres with reports of lungs becoming inflamed [21].”
BackgroundNanoparticles in modern medicine: state of the art and future challenges.
(2007) · PubMed Central · Cited by 484
On the Basic concept of Nanotechnology
Taniguchi, N. (1974) · Medical Entomology and Zoology · Cited by 423
There’s Plenty of Room at the Bottom
Feynman, R. (2018) · Feynman and Computation · doi:10.1201/9780429500459-7 · Cited by 420
Reviewing the Environmental and Human Health Knowledge Base of Carbon Nanotubes
Helland, A., Wick, P., Koehler, A., Schmid, K., & Som, C. (2007) · Environmental Health Perspectives · doi:10.1289/ehp.9652 · Cited by 415
Nanoparticles skin absorption: New aspects for a safety profile evaluation
Larese Filon, F., Mauro, M., Adami, G., Bovenzi, M., & Crosera, M. (2015) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2015.05.005 · Cited by 390
Toxicity of cigarette butts, and their chemical components, to marine and freshwater fish
Slaughter, E., Gersberg, R. M., Watanabe, K., Rudolph, J., Stransky, C., & Novotny, T. E. (2011) · Tobacco Control · doi:10.1136/tc.2010.040170 · Cited by 373
Cigarettes Butts and the Case for an Environmental Policy on Hazardous Cigarette Waste
Novotny, T. E., Lum, K., Smith, E., Wang, V., & Barnes, R. (2009) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph6051691 · Cited by 336
Nanoparticle dermal absorption and toxicity: a review of the literature
Crosera, M., Bovenzi, M., Maina, G., Adami, G., Zanette, C., Florio, C., & Filon Larese, F. (2009) · International Archives of Occupational and Environmental Health · doi:10.1007/s00420-009-0458-x · Cited by 297
Using the mouse to model human disease: increasing validity and reproducibility
Justice, M. J., & Dhillon, P. (2016) · Disease Models & Mechanisms · doi:10.1242/dmm.024547 · Cited by 281
Bhatt, I., & Tripathi, B. N. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2010.10.011 · Cited by 279
Effects of recycled concrete aggregates on properties of asphalt concrete
Paranavithana, S., & Mohajerani, A. (2006) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2005.12.009 · Cited by 256
Self-citationAerobic biodegradation of cellulose acetate
Buchanan, C. M., Gardner, R. M., & Komarek, R. J. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070471001 · Cited by 254
Ultrafine particles: mechanisms of lung injury
Donaldson, K., Stone, V., Gilmour, P. S., Brown, D. M., & MacNee, W. (2000) · Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2000.0681 · Cited by 252
Titanium Dioxide Nanoparticles: a Risk for Human Health?
Grande, F., & Tucci, P. (2016) · Mini-Reviews in Medicinal Chemistry · doi:10.2174/1389557516666160321114341 · Cited by 250
There’s Plenty of Room at the Bottom: An Invitation to Enter a New Field of Physics
Feynman, R. P. (2018) · CaltechAUTHORS (California Institute of Technology) · doi:10.1201/9781315217178-6 · Cited by 243
Leung, S. (2008) · International Journal of Nanomedicine · doi:10.2147/ijn.s3234 · Cited by 231
Recycling of dimensional stone waste in concrete: A review
Rana, A., Kalla, P., Verma, H. K., & Mohnot, J. K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.126 · Cited by 225 · cited 1×
“Furthermore, the construction industry is always looking at other ways to improve the environmental and economical sustainability, and, even though using nanoparticles in concrete has improved constructability and resulted in greatly improved construction times, there is the issue of recycling these nanoparticles alon…”
BackgroundRegulatory Aspects of Nanomaterials in the EU
Rauscher, H., Rasmussen, K., & Sokull‐Klüttgen, B. (2017) · Chemie Ingenieur Technik · doi:10.1002/cite.201600076 · Cited by 200
A practical proposal for solving the world’s cigarette butt problem: Recycling in fired clay bricks
Mohajerani, A., Kadir, A. A., & Larobina, L. (2016) · Waste Management · doi:10.1016/j.wasman.2016.03.012 · Cited by 200 · cited 1×
“With these materials bound together under high temperatures, a good compressive strength material is formed which makes the earth brick an exceptional domestic construction material [44,45].”
BackgroundSelf-citationHigh and low temperature properties of nano-particles/polymer modified asphalt
Zhang, H.-L., Su, M.-M., Zhao, S.-F., Zhang, Y.-P., & Zhang, Z.-P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.118 · Cited by 196 · cited 1×
“However, to account for the extreme temperatures, the modification of asphalt’s material properties of ductility and elasticity can be changed with the addition of nanoparticles with the most popular modifiers being styrene–butadiene–styrene (SBS), styrene–butadiene–rubber (SBR), and polyethylene (PE) [37].”
BackgroundOsborne, O. J., Lin, S., Chang, C. H., Ji, Z., Yu, X., Wang, X., Lin, S., Xia, T., & Nel, A. E. (2015) · ACS Nano · doi:10.1021/acsnano.5b04583 · Cited by 196
Physico-mechanical and thermal performances of newly developed rubber-added bricks
Turgut, P., & Yesilata, B. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.05.002 · Cited by 184
Analysis of metals leached from smoked cigarette litter
Moerman, J. W., & Potts, G. E. (2011) · Tobacco Control · doi:10.1136/tc.2010.040196 · Cited by 184
Effects of nanoparticle on the dynamic behaviors of recycled aggregate concrete under impact loading
Li, W., Luo, Z., Long, C., Wu, C., Duan, W. H., & Shah, S. P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.045 · Cited by 180 · cited 4×
“The current research available, however, is limited, and more work should be conducted to investigate the dynamic mechanical properties of the effects of nanoparticles with the recycled concrete and how this compares against fresh normal concrete in terms of impact loading [54].”
BackgroundInfluentialRasmussen, K., González, M., Kearns, P., Sintes, J. R., Rossi, F., & Sayre, P. (2016) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2015.11.004 · Cited by 150
Hazards and Risks of Engineered Nanoparticles for the Environment and Human Health
Hristozov, D., & Malsch, I. (2009) · Sustainability · doi:10.3390/su1041161 · Cited by 149 · cited 2×
“Therefore, understanding their properties is a critical factor in determining the potential toxicological hazards and their exposure to the environment [56].”
BackgroundNanotechnology in Construction: Proceedings of NICOM5
(2015) · doi:10.1007/978-3-319-17088-6 · Cited by 149
Recycling waste materials in geopolymer concrete
Mohajerani, A., Suter, D., Jeffrey-Bailey, T., Song, T., Arulrajah, A., Horpibulsuk, S., & Law, D. W. (2019) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-018-01660-2 · Cited by 148 · cited 1×
“To modify the properties of concrete for particular applications, chemical admixtures, such as air-entraining agents and superplasticisers, are added in small quantities [31].”
BackgroundSelf-citationEffect of nano-particles on durability of fiber-reinforced concrete pavement
Salemi, N., & Behfarnia, K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.037 · Cited by 144 · cited 3×
“Nano-silica also reduces the porosity of the concrete, reducing the ability of water and other elements to penetrate the concrete, which avoids the potential for concrete degradation [32].”
BackgroundInfluentialGualtieri, M. L., Gualtieri, A. F., Gagliardi, S., Ruffini, P., Ferrari, R., & Hanuskova, M. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.06.002 · Cited by 140 · cited 1×
“2 million vehicles were registered, travelling an estimated cumulative 249,512 million kilometres, and averaging 13,719 kilometres per vehicle [29].”
BackgroundInfluence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt
Moghadas Nejad, F., Azarhoosh, A. R., Hamedi, G. H., & Azarhoosh, M. J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.01.004 · Cited by 135 · cited 2×
“This can cause a loss of stiffness, durability, and strength [41,42].”
BackgroundA short history of the toxicology of inhaled particles
Donaldson, K., & Seaton, A. (2012) · Particle and Fibre Toxicology · doi:10.1186/1743-8977-9-13 · Cited by 128
Preliminary study for the management of construction and demolition waste
Kourmpanis, B., Papadopoulos, A., Moustakas, K., Stylianou, M., Haralambous, K. J., & Loizidou, M. (2008) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x07083344 · Cited by 128 · cited 1×
“Therefore, during the demolition stage, the release of nanomaterials into the environment can be uncontrollable, and, hence, why strict standard demolition procedures need to be applied [66].”
BackgroundDeformation of Single Crystals, Polycrystalline Materials, and Thin Films: A Review
Yang, G., & Park, S.-J. (2019) · Materials · doi:10.3390/ma12122003 · Cited by 121 · cited 1×
“The atoms within nanoparticles are impeccably ordered; therefore, when the dimensions of a material are condensed from macro-size to micro-size (nano-size), substantial changes occur in the properties of the material [6,7].”
BackgroundNon-exhaust traffic related emissions – Brake and tyre wear PM
Grigoratos, T., & Martini, G. (2014) · Joint Research Centre (European Commission) · doi:10.2790/22000 · Cited by 114 · cited 3×
“However, a significant part of tyre and brake wear PM10 lies in the fine size fraction [28].”
BackgroundAscent of Nanoscience in China
Bai, C. (2005) · Science · doi:10.1126/science.1115172 · Cited by 107
De la Calle, I., Menta, M., & Séby, F. (2016) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2016.09.007 · Cited by 99
Physico-mechanical properties of asphalt concrete incorporated with encapsulated cigarette butts
Mohajerani, A., Tanriverdi, Y., Nguyen, B. T., Wong, K. K., Dissanayake, H. N., Johnson, L., Whitfield, D., Thomson, G., Alqattan, E., & Rezaei, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.091 · Cited by 99 · cited 1×
“With these and other nanoparticles acting as modifiers to asphalt, it has been deemed that the integration of nanoparticles in asphalt has greatly improved the serviceability of the material [39,40].”
BackgroundSelf-citationTeizer, J., Venugopal, M., Teizer, W., & Felkl, J. (2012) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0000467 · Cited by 98 · cited 2×
“The distinctive physical and chemical properties of nanoparticles allow the design of systems with high sensitivity, large surface areas, special surface effects, high functional density, catalytic effects, and high strain resistance [10].”
BackgroundSilver Nanoparticles in the Lung: Toxic Effects and Focal Accumulation of Silver in Remote Organs
Wiemann, M., Vennemann, A., Blaske, F., Sperling, M., & Kärst, U. (2017) · Nanomaterials · doi:10.3390/nano7120441 · Cited by 95
Mohajerani, A., Ukwatta, A., Jeffrey-Bailey, T., Swaney, M., Ahmed, M., Rodwell, G., Bartolo, S., Eshtiaghi, N., & Setunge, S. (2019) · Buildings · doi:10.3390/buildings9010014 · Cited by 80 · cited 1×
“With these materials bound together under high temperatures, a good compressive strength material is formed which makes the earth brick an exceptional domestic construction material [44,45].”
BackgroundSelf-citationPreparation and properties of isocyanate and nano particles composite modified asphalt
Fang, C., Yu, X., Yu, R., Liu, P., & Qiao, X. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.099 · Cited by 77 · cited 1×
“With these and other nanoparticles acting as modifiers to asphalt, it has been deemed that the integration of nanoparticles in asphalt has greatly improved the serviceability of the material [39,40].”
BackgroundUse of waste cooking oil, tire rubber powder and palm oil fuel ash in partial replacement of bitumen
Rahman, M. T., Hainin, M. R., & Bakar, W. A. W. A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.216 · Cited by 72 · cited 1×
“The resistance of asphalt to high and low temperatures is weak, which results in the asphalt melting or cracking [36].”
BackgroundGillespie, P. A., Kang, G. S., Elder, A., Gelein, R., Chen, L., Moreira, A. L., Koberstein, J., Tchou-Wong, K.-M., Gordon, T., & Chen, L. C. (2010) · Nanotoxicology · doi:10.3109/17435390903470101 · Cited by 70
Asphalt Modified with Nonmetals Separated from Pulverized Waste Printed Circuit Boards
Guo, J., Guo, J., Wang, S., & Xu, Z. (2009) · Environmental Science & Technology · doi:10.1021/es8023012 · Cited by 69
Silver Nanoparticles in the Environment
(2015) · doi:10.1007/978-3-662-46070-2 · Cited by 68
Carcinogenicity of inhaled nanoparticles
Roller, M. (2009) · Inhalation Toxicology · doi:10.1080/08958370902942541 · Cited by 67 · cited 2×
“Regarding engineered nanoparticles, it has been concluded that there is inadequate epidemiological analysis to conclude a causal relationship between exposure to particles and lung cancer risk [58].”
BackgroundResultIckrath, P., Wagner, M., Scherzad, A., Gehrke, T. E., Burghartz, M., Hagen, R., Radeloff, K., Kleinsasser, N. H., & Hackenberg, S. (2017) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph14121590 · Cited by 62
Dustiness test of nanopowders using a standard rotating drum with a modified sampling train
Tsai, C.-J., Wu, C.-H., Leu, M.-L., Chen, S.-C., Huang, C.-Y., Tsai, P.-J., & Ko, F.-H. (2009) · Journal of Nanoparticle Research · doi:10.1007/s11051-008-9453-5 · Cited by 61 · cited 1×
“found a substantial release of nanoparticles during the handling of dry powders containing nanoparticles inside laboratory fume hoods [60].”
BackgroundChromated copper arsenate timber: A review of products, leachate studies and recycling
Mohajerani, A., Vajna, J., & Ellcock, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.111 · Cited by 60 · cited 1×
“The coating further provides UV protection and retains the quality of the surface [48].”
BackgroundSelf-citationThe Influence of Nano-clays on Compressive Strength of Earth Bricks as Sustainable Materials
Niroumand, H., Zain, M. F. M., & Alhosseini, S. N. (2013) · Procedia - Social and Behavioral Sciences · doi:10.1016/j.sbspro.2013.08.945 · Cited by 51 · cited 2×
“conducted compressive strength tests to check the influence of nano-clays on earth bricks [46].”
BackgroundNaturally occurring nanoparticles in food
Rogers, M. A. (2016) · Current Opinion in Food Science · doi:10.1016/j.cofs.2015.08.005 · Cited by 49 · cited 2×
“These nanoscale platelets are generally 200 nm long, 80 nm wide and 20 nm thick, and act as the smallest microstructural elements of the colloidal fat crystal network [27].”
BackgroundTesting the effectiveness of protective coatings on traditional bricks
Stefanidou, M., & Karozou, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.114 · Cited by 48 · cited 2×
“Stefanidou and Karazou tested the effectiveness of different protective coatings on bricks and compared the physical properties of each solution [47].”
BackgroundRheological Evaluation of Asphalt Cements Modified with ASA Polymer and Al2O3 Nanoparticles
Mubaraki, M., Ali, S. I. A., Ismail, A., & Yusoff, N. I. M. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.135 · Cited by 47 · cited 1×
“A 5% inclusion of Al2O3 in the asphalt mix design showed strong resistance to high temperatures [38].”
BackgroundEngineered Nanoparticles and the Environment: Biophysicochemical Processes and Toxicity
Xing, B., Vecitis, C. D., & Senesi, N. (2016) · doi:10.1002/9781119275855 · Cited by 47
Evaluation of Mechanical Properties of Recycled Material for Utilization in Asphalt Mixtures
Tahmoorian, F., Samali, B., Tam, V. W. Y., & Yeaman, J. (2017) · Applied Sciences · doi:10.3390/app7080763 · Cited by 46
Kumar, A., Gupta, A., Sharma, K. V., & Nasir, M. (2013) · European Journal of Wood and Wood Products · doi:10.1007/s00107-013-0664-9 · Cited by 38 · cited 2×
“One fabrication of wood is medium density fibreboard (MDF), which is an engineered wood product composed of a synthetic resin combined with fine lingo cellulosic fibres that is subjected to pressure and heat to form panels [49].”
BackgroundNanotechnology on wood: The effect of photocatalytic nanocoatings against Aspergillus niger
Goffredo, G. B., Citterio, B., Biavasco, F., Stazi, F., Barcelli, S., & Munafò, P. (2017) · Journal of Cultural Heritage · doi:10.1016/j.culher.2017.04.006 · Cited by 38 · cited 1×
“studied the potential of titanium dioxide (TiO2) due to its photoactivity under UV illumination as a biocide and its antifungal and antibacterial use on wood surfaces [50].”
BackgroundRecycling concrete: An undiscovered source of ultrafine particles
Kumar, P., & Morawska, L. (2014) · Atmospheric Environment · doi:10.1016/j.atmosenv.2014.03.035 · Cited by 37 · cited 4×
“With the inclusion of nanoparticles in concrete construction and recycling, a new hazard is introduced, and the risk management plans need to be accommodating of this change [52].”
BackgroundInfluentialRecovery of Nanoparticles Made Easy
Myakonkaya, O., Guibert, C., Eastoe, J., & Grillo, I. (2010) · Langmuir · doi:10.1021/la100111b · Cited by 35
High Performance Bricks from Fly Ash
Kayali, O. (2005) · UKnowledge (University of Kentucky) · Cited by 35
(2011) · European journal of law and technology · Cited by 34
Barkoula, N.-M., Ioannou, C., Aggelis, D. G., & Matikas, T. E. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.055 · Cited by 34 · cited 2×
“When preparing nano-silica for use with cement, it can either be prepared dry or wet [63].”
MethodOravisjärvi, K., Pietikäinen, M., Ruuskanen, J., Niemi, S., Laurén, M., Voutilainen, A., Keiski, R. L., & Rautio, A. (2014) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2013.11.008 · Cited by 32
Evaluation and control of occupational health risks from nanoparticles
Schneider, T. (2007) · TemaNord · doi:10.6027/tn2007-581 · Cited by 30 · cited 1×
“Most nanomaterial exposures are in the form of agglomerates/aggregates; therefore, when particle sizes are measured, analysers are unable to reveal the agglomeration state and the degree to which an agglomerate can separate into several more units in the lung fluid [62].”
BackgroundA Study on Modified Bitumen with Metal Doped Nano-TiO2 Pillared Montmorillonite
Jin, J., Chen, B., Liu, L., Liu, R., Qian, G., Wei, H., & Zheng, J. (2019) · Materials · doi:10.3390/ma12121910 · Cited by 29
Hegazy, M. A., Badawi, A. M., Abd El Rehim, S. S., & Kamel, W. M. (2013) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2013.11.009 · Cited by 24 · cited 1×
“studied the influence of colloidal copper nanoparticles as a modifier for steel anti-corrosion paints [51].”
BackgroundAn Overview on Application of Nanotechnology in Construction Industry
Abhiyan, S. P., Hiren, A. R., & SharmaD., N. (2013) · International Journal of Innovative Research in Science Engineering and Technology · Cited by 24
Nano-Innovation in Construction, a New Era of Sustainability
(2015) · doi:10.15242/iae.iae0415416 · Cited by 21 · cited 6×
“These bars are known as micro-composite multi-structural formable (MMFX) steel and are preferred over conventional steel due to their corrosion-resistance and durable properties [17].”
BackgroundInfluentialBaek, S.-C., Kim, Y., Choi, J., & Hong, W. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.117 · Cited by 16 · cited 2×
“The main issue with asbestos is its porous form, which can induce a variety of cancers in exposed workers [64].”
BackgroundCurrent Developments/ Activities on the Safety of Manufactured Nanomaterials
OECD (2007) · OECD Papers · doi:10.1787/oecd_papers-v7-art36-en · Cited by 14
Sarkar, D., Pal, M., & Sarkar, A. K. (2014) · Zenodo · doi:10.5281/zenodo.1097389 · Cited by 5
Kumar, A., Prasad, M. N. V., Maiti, S. K., & Tripti, T. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803837-6.00013-5 · Cited by 5
Nanotechnology in China: Regulations and Patents
Liu, D. (2008) · Nanotechnology law & business · Cited by 5
Sarkar, D., Pal, M., & Sarkar, A. K. (2014) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1097388 · Cited by 5
An Overview of Application of Nanotechnology in Construction Materials
Tiwari, A. K., & Chowdhury, S. (2013) · Proceedings of the International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM - 2012) · doi:10.1007/978-81-322-0757-3_28 · Cited by 4 · cited 2×
“With conventional steel, surface unevenness leads to stress risers, and, therefore, fatigue cracking; however, with the use of nanoparticles as a modifier, surface unevenness can be reduced, and, therefore, cracking [18].”
BackgroundNanomanufacturing and Processing—Research, Education, Infrastructure, Security, Resource
Biscarini, F., Taliani, C., Chen, J., & Komanduri, R. (2002) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1471359 · Cited by 3 · cited 2×
“Common processes of the top-down approach include thin film deposition and growth, mechanical, electrochemical material removal, laser beam processing, and lithography processes [5].”
BackgroundMethod
Research works printed but not linked: 6
- Rae, 2006, Real life applications of nanotechnology in electronics, OnBoard Technol., 2006, 28
- Strambeanu, N., Demetrovici, L., and Dragos, D. (2015). Nanoparticles’ Promises and Risks: Characterization Manipulation, Potential Hazards to Humanity the Environment, Springer.
- Khitab, 2014, Nano construction materials, Adv. Mater. Sci., 38, 181
- Lee, J., Mahendra, S., Alvarez, P., Bittnar, Z., Bartos, P.J., and Němeček, J. (2009). Nanotechnology in Construction 3: Proceedings of the NICOM3, Springer.
- Marianne, G. (2017). Cellulose Plastics. Brydson’s Plastics Materials, Elsevier.
- Veiseh, 2003, The use of polystyrene in lightweight brick production Iranian, Polym. J., 12, 323
Cited by
Ali, M. H., Azad, M. A. K., Khan, K. A., Rahman, M. O., Chakma, U., & Kumer, A. (2023) · ACS Omega · doi:10.1021/acsomega.3c01261 · Cited by 317
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Onaizi, A. M., Huseien, G. F., Lim, N. H. A. S., Amran, M., & Samadi, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124850 · Cited by 202
Mishra, T., Mandal, P., Rout, A. K., & Sahoo, D. (2022) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2022.100298 · Cited by 181
Principles of green chemistry: building a sustainable future
Kurul, F., Doruk, B., & Topkaya, S. N. (2025) · Discover Chemistry · doi:10.1007/s44371-025-00152-9 · Cited by 185
“Nanoparticles are utilized in a wide range of fields, including materials and manufacturing [80], environmental and energy sectors [81], and the textile industry [82], where they enhance strength, durability, and functional properties.”
Metadata
- Authors
- Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A.
- Affiliations
- RMIT University (AU)
- Swinburne University of Technology (AU)
- Suranaree University of Technology (TH)
- Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), Batu Pahat 86400, Johor, Malaysia
- Corresponding author
- Mohajerani, Abbas
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-09-20
- Volume
- 12
- Issue
- 19
- Pages
- 3052
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC6804222
- OpenAlex
- W2973574987
- Semantic Scholar
- d48655bed2cb6fe97f2fe8f3e610ebc4048a8b6b
- Cited by
- 348
- References
- 95
- Citations by year
- 2026: 27 · 2025: 73 · 2024: 75 · 2023: 58 · 2022: 56 · 2021: 42 · 2020: 17
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RMIT Research Repository (RMIT University Library) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion, cc-by)
- Swinburne figshare (Swinburne University of Technology) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Materials Science › General Materials Science › Nanotechnology research and applications
- Physical Sciences › Materials Science › Materials Chemistry › Nanoparticles: synthesis and applications
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Keywords
- nanoparticles, building materials, nanomaterials, titanium dioxide, carbon nanotubes, silica nanoparticles, nanoclay, Al2O3 nanoparticles, concrete, asphalt mixtures, brick, timber, steel, environmental risk, human health risk, nanoparticle exposure, nanotechnology regulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
![Figure 1 SEM micrographs of plain (A) and nano-silica modified cement paste (B) [32].](https://figures.cochat.ai/paper-figures/a77f45bc16c346e5a69da1d5d040abd7/nanoparticles-in-construction-materials-and-other-applications-and-implications-figure-1.jpg)