The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Prediction of Compressive Strength of Fly Ash Based Concrete Using Individual and Ensemble Algorithm
Open accessAbstract
Machine learning techniques are widely used algorithms for predicting the mechanical properties of concrete. This study is based on the comparison of algorithms between individuals and ensemble approaches, such as bagging. Optimization for bagging is done by making 20 sub-models to depict the accurate one. Variables like cement content, fine and coarse aggregate, water, binder-to-water ratio, fly-ash, and superplasticizer are used for modeling. Model performance is evaluated by various statistical indicators like mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE). Individual algorithms show a moderate bias result. However, the ensemble model gives a better result with R2 = 0.911 compared to the decision tree (DT) and gene expression programming (GEP). K-fold cross-validation confirms the model’s accuracy and is done by R2, MAE, MSE, and RMSE. Statistical checks reveal that the decision tree with ensemble provides 25%, 121%, and 49% enhancement for errors like MAE, MSE, and RMSE between the target and outcome response.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Study of Cross-Validation and Bootstrap for Accuracy Estimation and Model Selection
Kohavi, R. (1995) · Zenodo · doi:10.5281/zenodo.19712698 · Cited by 10,909
Machine learning-based compressive strength prediction for concrete: An adaptive boosting approach
Feng, D.-C., Liu, Z.-T., Wang, X.-D., Chen, Y., Chang, J.-Q., Wei, D.-F., & Jiang, Z.-M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117000 · Cited by 856
Machine learning prediction of mechanical properties of concrete: Critical review
Ben Chaabene, W., Flah, M., & Nehdi, M. L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119889 · Cited by 779
Gene Expression Programming in Problem Solving
Ferreira, C. (2002) · Soft Computing and Industry · doi:10.1007/978-1-4471-0123-9_54 · Cited by 605
Naderpour, H., Rafiean, A. H., & Fakharian, P. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.01.007 · Cited by 603
Ribeiro, M. H. D. M., & dos Santos Coelho, L. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2019.105837 · Cited by 525
Dou, J., Yunus, A. P., Bui, D. T., Merghadi, A., Sahana, M., Zhu, Z., Chen, C.-W., Han, Z., & Pham, B. T. (2020) · Landslides · doi:10.1007/s10346-019-01286-5 · Cited by 519
Farooq, F., Ahmed, W., Akbar, A., Aslam, F., & Alyousef, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126032 · Cited by 425
Self-citationIqbal, M. F., Liu, Q.-F., Azim, I., Zhu, X., Yang, J., Javed, M. F., & Rauf, M. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121322 · Cited by 399
Bui, D.-K., Nguyen, T., Chou, J.-S., Nguyen-Xuan, H., & Ngo, T. D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.201 · Cited by 395
Biochar as green additives in cement-based composites with carbon dioxide curing
Wang, L., Chen, L., Tsang, D. C. W., Guo, B., Yang, J., Shen, Z., Hou, D., Ok, Y. S., & Poon, C. S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120678 · Cited by 373
Prediction of epidemic trends in COVID-19 with logistic model and machine learning technics
Wang, P., Zheng, X., Li, J., & Zhu, B. (2020) · Chaos, Solitons & Fractals · doi:10.1016/j.chaos.2020.110058 · Cited by 333
Prediction of surface chloride concentration of marine concrete using ensemble machine learning
Cai, R., Han, T., Liao, W., Huang, J., Li, D., Kumar, A., & Ma, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106164 · Cited by 284
Farooq, F., Nasir Amin, M., Khan, K., Rehan Sadiq, M., Faisal Javed, M. F., Aslam, F., & Alyousef, R. (2020) · Applied Sciences · doi:10.3390/app10207330 · Cited by 279
Self-citationFeng, D.-C., Liu, Z.-T., Wang, X.-D., Jiang, Z.-M., & Liang, S.-X. (2020) · Advanced Engineering Informatics · doi:10.1016/j.aei.2020.101126 · Cited by 269
Liu, Q.-F., Iqbal, M. F., Yang, J., Lu, X.-Y., Zhang, P., & Rauf, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121082 · Cited by 259
Getahun, M. A., Shitote, S. M., & Abiero Gariy, Z. C. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.097 · Cited by 247
On carbon dioxide utilization as a means to improve the sustainability of ready-mixed concrete
Monkman, S., & MacDonald, M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.194 · Cited by 230
Aslam, F., Farooq, F., Amin, M. N., Khan, K., Waheed, A., Akbar, A., Javed, M. F., Alyousef, R., & Alabdulijabbar, H. (2020) · Advances in Civil Engineering · doi:10.1155/2020/8850535 · Cited by 218
Self-citationErdal, H. I. (2013) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2013.03.014 · Cited by 213
Damage prediction for regular reinforced concrete buildings using the decision tree algorithm
Karbassi, A., Mohebi, B., Rezaee, S., & Lestuzzi, P. (2014) · Computers & Structures · doi:10.1016/j.compstruc.2013.10.006 · Cited by 175
Carbon dioxide as an admixture for better performance of OPC-based concrete
Qian, X., Wang, J., Fang, Y., & Wang, L. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.03.007 · Cited by 174
Javed, M. F., Amin, M. N., Shah, M. I., Khan, K., Iftikhar, B., Farooq, F., Aslam, F., Alyousef, R., & Alabduljabbar, H. (2020) · Crystals · doi:10.3390/cryst10090737 · Cited by 169
Self-citationAkbar, A., & Liew, K. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123001 · Cited by 168
Self-citationKaboli, S. H. A., Fallahpour, A., Selvaraj, J. A.-L., et al. (2017) · Energy · doi:10.1016/j.energy.2017.03.009 · Cited by 163
Ahmad, T., Chen, H., Huang, R., Yabin, G., Wang, J., Shair, J., Akram, H. M. A., Mohsan, S. A. H., & Kazim, M. Z. (2018) · Energy · doi:10.1016/j.energy.2018.05.169 · Cited by 155
CO 2 uptake potential due to concrete carbonation: A case study
Possan, E., Thomaz, W. D. A., Aleandri, G. A., Félix, E. F., & dos Santos, A. C. P. (2017) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2017.01.007 · Cited by 145
Cladera, A., & Mari, A. R. (2004) · Engineering Structures · doi:10.1016/j.engstruct.2004.02.010 · Cited by 145
Javed, M. F., Farooq, F., Memon, S. A., Akbar, A., Khan, M. A., Aslam, F., Alyousef, R., Alabduljabbar, H., & Rehman, S. K. U. (2020) · Crystals · doi:10.3390/cryst10090741 · Cited by 128
Self-citationTurning municipal solid waste incineration into a cleaner cement production
Ghouleh, Z., & Shao, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.209 · Cited by 125
Shah, M. I., Javed, M. F., & Abunama, T. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-11490-9 · Cited by 121
Sadowski, Ł., Piechówka-Mielnik, M., Widziszowski, T., Gardynik, A., & Mackiewicz, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.059 · Cited by 106
Salami, B. A., Rahman, S. M., Oyehan, T. A., Maslehuddin, M., & Al-Dulaijan, S. U. (2020) · Measurement · doi:10.1016/j.measurement.2020.108141 · Cited by 106
Zounemat‐Kermani, M., Stephan, D. A., Barjenbruch, M., & Hinkelmann, R. (2019) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.101030 · Cited by 104
Mitigation of carbon dioxide by accelerated sequestration in concrete debris
Zhang, N., Duan, H., Miller, T. R., Tam, V. W. Y., Liu, G., & Zuo, J. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109495 · Cited by 76
Czarnecki, S., Shariq, M., Nikoo, M., & Sadowski, Ł. (2020) · Measurement · doi:10.1016/j.measurement.2020.108951 · Cited by 76
A comparative assessment of bagging ensemble models for modeling concrete slump flow
Aydoğmuş, H. Y., Erdal, H. İ., Karakurt, O., Namlı, E., Türkan, Y. S., & Erdal, H. (2015) · Computers and Concrete, an International Journal · doi:10.12989/cac.2015.16.5.741 · Cited by 56
Onyari, E. K., & Ikotun, B. D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.079 · Cited by 52
Predicting the compressive strength of fly ash concrete with the Particle Model
Kang, S., Lloyd, Z., Kim, T., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106218 · Cited by 50
Lee, M.-G., Kang, D., Jo, H., & Park, J. (2016) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-015-0461-0 · Cited by 32
Concrete compressive strength prediction using the imperialist competitive algorithm
Sadowski, Ł., Nikoo, M., & Nikoo, M. R. (2018) · Computers and Concrete, an International Journal · doi:10.12989/cac.2018.22.4.355 · Cited by 20
Cited by
Baduge, S. K., Thilakarathna, S., Perera, J. S., Arashpour, M., Sharafi, P., Teodosio, B., Shringi, A., & Mendis, P. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104440 · Cited by 1,007
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Song, H., Ahmad, A., Farooq, F., Ostrowski, K. A., Maślak, M., Czarnecki, S., & Aslam, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125021 · Cited by 384
Self-citationAhmad, A., Ahmad, W., Aslam, F., & Joyklad, P. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00840 · Cited by 306
Self-citation
Metadata
- Authors
- Ahmad, A., Farooq, F., Niewiadomski, P., Ostrowski, K., Akbar, A., Aslam, F., & Alyousef, R.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-02-08
- Volume
- 14
- Issue
- 4
- Pages
- 794
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3126997349
- Cited by
- 271
- References
- 41
- FWCI
- 24.32
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.