Green Copolymers Based on Poly(Lactic Acid)—Short Review
Open accessThe DOI matches its Crossref record; 100 of the 103 references it cites were found in a registry or an index; 29 of the 160 sources its claims cite were checked for support.
Abstract
Polylactic acid (PLA) is a biodegradable and biocompatible polymer that can be applied in the field of packaging and medicine. Its starting substrate is lactic acid and, on this account, PLA can also be considered an ecological material produced from renewable resources. Apart from several advantages, polylactic acid has drawbacks such as brittleness and relatively high glass transition and melting temperatures. However, copolymerization of PLA with other polymers improves PLA features, and a desirable material marked by preferable physical properties can be obtained. Presenting a detailed overview of the accounts on the PLA copolymerization accomplishments is the innovation of this paper. Scientific findings, examples of copolymers (including branched, star, grafted or block macromolecules), and its applications are discussed. As PLA copolymers can be potentially used in pharmaceutical and biomedical areas, the attention of this article is also placed on the advances present in this field of study. Moreover, the subject of PLA synthesis is described. Three methods are given: azeotropic dehydrative condensation, direct poly-condensation, and ring-opening polymerization (ROP), along with its mechanisms. The applied catalyst also has an impact on the end product and should be adequately selected depending on the intended use of the synthesized PLA. Different ways of using stannous octoate (Sn(Oct)2) and examples of the other inorganic and organic catalysts used in PLA synthesis are presented.
Overview
CoChat Summary
## TL;DR
This review surveys poly(lactic acid) (PLA) as a biodegradable, renewable polymer and argues that copolymerization is the main route to overcome PLA’s brittleness and other property limits. It summarizes PLA synthesis methods, catalysts, and a wide range of PLA copolymers, especially for packaging and biomedical uses.
## Key findings
- PLA is presented as a biodegradable, biocompatible polymer made from lactic acid, which can be obtained from renewable feedstocks such as sweetcorn, rice, soya, potatoes, whey, and food-industry waste.
- The review states that PLA copolymerization can improve key properties: copolymerizing with PGA, PEG, or glycidol shortens degradation time; PCL-PLA improves elongation at break; and graft copolymers have lower crystallinity and higher degradation rates than linear PLA.
- For PLGA, the paper reports that copolymerization of lactic acid with glycolic acid can shorten degradation time by as much as three-fold, from 6 to 2 months.
- For PLA/glycidol copolymers, the paper reports a decrease in water contact angle from 95.7° for linear PLA to 62.4° for a copolymer containing 20 mol% glycidol, alongside a melting-temperature drop of over 30 °C.
- For one PCL-PLA blend, the paper reports elongation at break improving from 7.1% for neat PLA to 210.7% with 15 wt % PCL-PLA copolymer.
## Methods
- Narrative short review of published studies on PLA, its synthesis, catalysts, copolymers, and applications.
- The paper synthesizes findings from prior literature rather than presenting a new experimental dataset; the text repeatedly cites prior work and reports their measured values.
- Main analysis is qualitative comparison of synthesis routes, catalyst systems, copolymer architectures, and reported property changes such as molecular weight, crystallinity, degradation, and mechanical performance.
## Limitations
- The paper itself states that PLA still has drawbacks, including brittleness, relatively high glass transition and melting temperatures, hydrophobicity, and a need for better gas barrier properties.
- The review explicitly says more research is needed on safer, faster, and more stable catalysts, especially biocompatible catalysts for biomedical applications.
- Evident from the text: this is a short review with uneven coverage; several subsections are only briefly treated or left blank, so it does not provide a complete experimental comparison of all PLA copolymers.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Two lactic acid isomers [13].](https://figures.cochat.ai/paper-figures/59ae9d81e8804dfe887ec4cf1ac165b8/green-copolymers-based-on-poly-lactic-acid-short-review-figure-1.jpg)
![Figure 2 Scheme presenting the method of producing LA from acetic aldehyde using hydrogen cyanide [5].](https://figures.cochat.ai/paper-figures/cdf7303953954552854f409efee8489b/green-copolymers-based-on-poly-lactic-acid-short-review-figure-2.jpg)
![Figure 3 Scheme presenting receiving lactic acid [5].](https://figures.cochat.ai/paper-figures/3d8e9fb5bc0a433c818e458a679a3e26/green-copolymers-based-on-poly-lactic-acid-short-review-figure-3.jpg)
![Figure 4 Chemical structure of PLA [5].](https://figures.cochat.ai/paper-figures/c18fdefcf67f43129e7acb4f20b83b86/green-copolymers-based-on-poly-lactic-acid-short-review-figure-4.jpg)
![Figure 5 Glass transition temperatures (Tg) of PLA polymers with different L-stereoisomer contents as a function of number-average molecular weights (Mn). Symbols on the legend represent the L/D-isomers ratios [20].](https://figures.cochat.ai/paper-figures/a2bac1fbad0f4c7ca6e4b1b7a506f570/green-copolymers-based-on-poly-lactic-acid-short-review-figure-5.jpg)
![Figure 6 Manufacturing routes to polylactic acid [26].](https://figures.cochat.ai/paper-figures/d00319138471413badef5ae048b7794b/green-copolymers-based-on-poly-lactic-acid-short-review-figure-6.jpg)
![Figure 7 Flow diagram of the azeotropic dehydrative polycondensation of LA [28].](https://figures.cochat.ai/paper-figures/262e40e0e1564ce3be1d00bc751a41fb/green-copolymers-based-on-poly-lactic-acid-short-review-figure-7.jpg)
![Figure 8 Lactide—cyclic dimers for the ROP process [7].](https://figures.cochat.ai/paper-figures/1b2ff2e87dbe41b7a55c887c215a6b6d/green-copolymers-based-on-poly-lactic-acid-short-review-figure-8.jpg)
![Figure 9 Possible positions of breaking lactide ring [5].](https://figures.cochat.ai/paper-figures/3b35f183393743bc9d6f9af2c9375731/green-copolymers-based-on-poly-lactic-acid-short-review-figure-9.jpg)
![Figure 10 Cationic ring-opening polymerization mechanism for PLA [21].](https://figures.cochat.ai/paper-figures/da98f188ab094383b5caa4b0c9cc64c0/green-copolymers-based-on-poly-lactic-acid-short-review-figure-10.jpg)
![Figure 11 Anionic ring-opening polymerization mechanism for PLA [5].](https://figures.cochat.ai/paper-figures/d7313da7bb154ca595ca1d14111bdf48/green-copolymers-based-on-poly-lactic-acid-short-review-figure-11.jpg)
![Figure 12 Coordinative ring-opening polymerization mechanism for PLA [5].](https://figures.cochat.ai/paper-figures/63cb8130afd44475a8bab90a0f69ebcc/green-copolymers-based-on-poly-lactic-acid-short-review-figure-12.jpg)
![Figure 13 Structure of organometallic catalysts and organocatalysts used in PLA polymerization [6].](https://figures.cochat.ai/paper-figures/3851e8571c70492598f078d0f21fb75d/green-copolymers-based-on-poly-lactic-acid-short-review-figure-13.jpg)
![Figure 14 Summary of the selected polymer and copolymer architectures [50,51,52].](https://figures.cochat.ai/paper-figures/2ec1af5e5ebb4fdbadd3b836579e6de8/green-copolymers-based-on-poly-lactic-acid-short-review-figure-14.jpg)
![Figure 15 Chemical structure of LA, LG, and PLGA [53].](https://figures.cochat.ai/paper-figures/dde91214e8304c9db45a9ba861b2a46c/green-copolymers-based-on-poly-lactic-acid-short-review-figure-15.jpg)
![Figure 16 Approaches to sequenced and random PLGAs: (a) DIC = diisopropylcarbodiimide; (b) DPTS = 4-(dimethylamino) pyridinium ptoluenesulfonate. LG, LL, GG and GL are the different dimer units [58].](https://figures.cochat.ai/paper-figures/e8840ec63dca4b5286980c2032c67e87/green-copolymers-based-on-poly-lactic-acid-short-review-figure-16.jpg)
![Figure 17 ATRP Equilibrium; kp—propagation reaction rate constant; kt—termination reaction rate constant [64].](https://figures.cochat.ai/paper-figures/5e003feecea8428bb81e9ae07fbc4a05/green-copolymers-based-on-poly-lactic-acid-short-review-figure-17.jpg)
![Figure 18 Chemical structure of PEG [66].](https://figures.cochat.ai/paper-figures/237be93ef7984f1fb9b4b12af9cc51a6/green-copolymers-based-on-poly-lactic-acid-short-review-figure-18.jpg)
![Figure 19 Scheme of PEG-(PLLAn)8-AC synthesis [68].](https://figures.cochat.ai/paper-figures/6260c17375104e7baa8548d48ecc7114/green-copolymers-based-on-poly-lactic-acid-short-review-figure-19.jpg)
![Figure 20 Chemical structure of diPCLPLA block copolymer [75].](https://figures.cochat.ai/paper-figures/3f30b09ebbdf41e3b20aa8d3d90aad2c/green-copolymers-based-on-poly-lactic-acid-short-review-figure-20.jpg)
![Figure 21 Structure of POSS(PLLA-b-PNIPAM) block copolymer [81].](https://figures.cochat.ai/paper-figures/ee796665d5f74aee802891a3fa3294bf/green-copolymers-based-on-poly-lactic-acid-short-review-figure-21.jpg)
![Figure 22 Synthesis of graft polymer PLA (PGA) on PVA by “grafting from” method [82].](https://figures.cochat.ai/paper-figures/23339f713c7e41c88ca0696a1ec40ffb/green-copolymers-based-on-poly-lactic-acid-short-review-figure-22.jpg)
![Figure 23 Mechanism of branched polymer formation by ring-opening copolymerization of lactide with glycidol [84].](https://figures.cochat.ai/paper-figures/0285aea7c8fb428b81c41eaf08239318/green-copolymers-based-on-poly-lactic-acid-short-review-figure-23.jpg)
![Figure 24 Synthesis of graft polymer PLA onto poly(LA/CGS-OBz) by the generation of initiating groups and the “grafting from” method [86].](https://figures.cochat.ai/paper-figures/5a3abe4b998f4597a1db301f74c1a8b6/green-copolymers-based-on-poly-lactic-acid-short-review-figure-24.jpg)
![Figure 25 The process of repairing bone defects with the use of BMP/polymer composites [92].](https://figures.cochat.ai/paper-figures/1d1f5d81c78f46719de1f3ce58cafe41/green-copolymers-based-on-poly-lactic-acid-short-review-figure-25.jpg)
Verification
Claims the paper makes
24 Valid · 8 Not valid · 121 Not checked · 44 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“There is also the possibility of receiving lactic acid as a result of its fermentation from food industry waste products (potatoes, sweetcorn, sugar beet) and proper bacteria (Streptococcus, Pediococcus, Lactobacillus, Bifidobacterium) [14,15,16].”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 2. Lactic Acid (LA)—PLA Monomer
What the sources say
- Partly supportedcites [14] Foltynowicz Z. Jakubiak P. Polylactid acid—Biodegradable polymer obtained from vegetable resources Polimery 2002 47 769 774 10.14314/polimery.2002.769 sourceExperimental — accuracy not yet measured
The methods section (p. 1) says lactic acid can be produced by fermenting carbohydrates such as starch using Lactobacillus bacteria. It does not identify food-industry waste as a feedstock or name Streptococcus, Pediococcus, or Bifidobacterium, so those details in the citing sentence are not supported by this paper. (LLM, conf=0.88)
- Not matchedcites [15] Jankiewicz M. Zastosowanie Kwasu Mlekowego i Jego Pochodnych Akademia Rolnicza w Poznaniu, PWN Poznań, Poland 1995
We searched by its title and found no matching paper.
- Not matchedcites [16] Schlegel H.G. Mikrobiologia Ogólna PWN Warsaw, Poland 2003
We searched by its title and found no matching paper.
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The applied catalyst also has an impact on the end product and should be adequately selected depending on the intended use of the synthesized PLA.”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > Abstract
What the sources say
- Could not verifycites [9] Mehta R. Kumar V. Bhunia H. Upadhyay S.N. Synthesis of Poly(Lactic Acid): A Review J. Macromol. Sci. Part C 2005 45 325 349 10.1080/15321790500304148 sourceExperimental — accuracy not yet measured
The paper-scoped search returned no full-text snippets for Mehta’s *Synthesis of Poly(Lactic Acid): A Review* under either catalyst-related query. An abstract was not available to assess, so the review’s title alone cannot establish that it makes the specific point about selecting catalysts for intended PLA uses. The strongest unscoped matches (scores 0.443 and 0.431) are in other papers and do not substantiate an attribution error. (LLM, conf=0.70)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
Every source the paper cites for this claim was checked and supports it.
In the paper
“The azeotropic dehydration condensation reaction of LA provides high molecular weight PLA without the use of chain extenders or adjuvants [10].”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 4. PLA Synthesis—Methods > 4.2. Azeotropic Dehydrative Condensation
What the sources say
- Supportedcites [10] Hamad K. Kaseem M. Yang H.W. Deri F. Ko Y.G. Properties and medical applications of polylactic acid: A review Express Polym. Lett. 2015 9 435 455 10.3144/expresspolymlett.2015.42 source
Section 2, “Synthesis of polylactic acid,” explicitly describes azeotropic dehydration condensation of lactic acid as a method for yielding high-molecular-weight PLA without chain extenders or adjuvants. The cited claim closely paraphrases that statement. (LLM, conf=0.93)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Additionally, miktoarm star polymers, PLLA/PEG, were reported to form thermo-responsive hydrogels in water at high concentrations (22.5 wt %) [69].”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 6. PLA Copolymers > 6.3. PEG-PLA Copolymer
What the sources say
- Supportedcites [69] Velthoen I.W. Tijsma E.J. Dijkstra P.J. Feijen J. Thermo-Responsive Hydrogels Based on Branched Poly(L-lactide)-poly(ethylene glycol) Copolymers Macromol. Symp. 2008 272 13 27 10.1002/masy.200851202 source
The Gel Formation section reports that the branched PLLA–PEG copolymers formed temperature-responsive hydrogels in water and required at least 22.5–27.5 wt% copolymer, depending on the copolymer. The Conclusion likewise describes hydrogel formation at high concentrations; 22.5 wt% is the lower end of the reported threshold range, not a threshold for every copolymer. Page numbers were not provided in our copy. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The microspheres obtained had a porous structure inside, which advanced drug release.”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 7. PLA Applications
What the sources say
- Supportedcites [90] Li G. Zhao M. Xu F. Yang B. Li X. Meng X. Teng L. Sun F. Li Y. Synthesis and Biological Application of Polylactic Acid Molecules 2020 25 5023 10.3390/molecules25215023 PMC7662581 33138232 source
The Drug Delivery section directly states that the paclitaxel-containing PLA–PEG–PLA microspheres had a porous interior that promoted drug release. This matches the attributed claim. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
96 more claims · 11 with their cited sources checked
Create a free account to see all 197 claims and every source verdict.
- Probably not a substantial claim. 42
- It may state two separate claims as one. 61
- The quote only partly states this claim. 3
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Atom Transfer Radical Polymerization (ATRP): Current Status and Future Perspectives
Matyjaszewski, K. (2012) · Macromolecules · doi:10.1021/ma3001719 · Cited by 2,606
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Nanocapsule formation by interfacial polymer deposition following solvent displacement
Fessi, H., Puisieux, F., Devissaguet, J. P., Ammoury, N., & Benita, S. (1989) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(89)90281-0 · Cited by 2,288
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Research works printed but not linked: 5
- Szaraniec B. Stodolak-Zych E. Morawska-Chochół A. Eco-composites based on polylactide and natural fibers Przetwórstwo Tworzyw 2011 6 534 538
- Żenkiewicz M. Richert J. Synthesis, properties and applications of polylactide Przetwórstwo Tworzyw 2009 15 192 199
- Hartmann M.H. Kaplan D. Biopolymers from Renewable Resources Springer Berlin/Heidelberg, Germany 1998 978-3-662-03680-8
- Irska I. Piesowicz E. Rosłaniec Z. Biodegradable PLA-based thermoplastic elastomers Elastomery 2016 20 17 25
- Duda A. Poylactide: A polymer of the XXIst century Przem. Chem. 2003 82 905 907
Cited by
Vlachopoulos, A., Karlioti, G., Balla, E., Daniilidis, V., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Christodoulou, E., Koumentakou, I., Karavas, E., et al. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020359 · Cited by 277
Kuperkar, K., Atanase, L., Bahadur, A., Crivei, I., & Bahadur, P. (2024) · Polymers · doi:10.3390/polym16020206 · Cited by 240
“These core–shell aggregates from amphiphilic polymers are excellent for solubilization of hydrophobic drugs [85–87].”
BackgroundTailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
Synthesis, properties, and applications of polylactic acid‐based polymers
Ramezani Dana, H., & Ebrahimi, F. (2023) · Polymer Engineering & Science · doi:10.1002/pen.26193 · Cited by 217
Ntrivala, M. A., Pitsavas, A. C., Lazaridou, K., Baziakou, Z., Karavasili, D., Papadimitriou, M., Ntagkopoulou, C., Balla, E., & Bikiaris, D. N. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114033 · Cited by 178
Shekhar, N., & Mondal, A. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05252-7 · Cited by 174
“5 [11].”
InfluentialA review of research and application of polylactic acid composites
Li, X., Lin, Y., Liu, M., Meng, L., & Li, C. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53477 · Cited by 171
Comprehensive review of natural based hydrogels as an upcoming trend for food packing
Leyva‐Jiménez, F. J., Oliver‐Simancas, R., Castangia, I., Rodríguez, A. M., & Alañón, M. E. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.108124 · Cited by 132
Self-Switchable Polymerization: A Smart Approach to Sequence-Controlled Degradable Copolymers
Hu, C., Pang, X., & Chen, X. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00085 · Cited by 88
An examination of cutting-edge developments in Bamboo-PLA composite research: A comprehensive review
Khan, A., Sapuan, S. M., Yusuf, J., Siddiqui, V. U., Zainudin, E. S., Zuhri, M. Y. M., Baharuddin, B. T. H. T., Ansari, M. A., & Rahman, A. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113832 · Cited by 80
Application of Biomedical Microspheres in Wound Healing
Yang, C., Zhang, Z., Gan, L., Zhang, L., Yang, L., & Wu, P. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24087319 · Cited by 83
Sun, Y., Zheng, Z., Wang, Y., Yang, B., Wang, J., & Mu, W. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03274-1 · Cited by 64
Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation
Rahmati, F., Sethi, D., Shu, W., Lajayer, B. A., Mosaferi, M., Thomson, A., & Price, G. W. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.141749 · Cited by 61
Coudane, J., Berghe, H. V. D., Mouton, J., Garric, X., & Nottelet, B. (2022) · Molecules · doi:10.3390/molecules27134135 · Cited by 57
Polymers for implantable devices
Ershad‐Langroudi, A., Babazadeh, N., Alizadegan, F., Mousaei, S. M., & Moradi, G. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.03.030 · Cited by 56
Role of Polymers in Microfluidic Devices
Damiati, L. A., yaagoubi, M. E., Damiati, S. A., Kodzius, R., Sefat, F., & Damiati, S. (2022) · Polymers · doi:10.3390/polym14235132 · Cited by 52
Green Chemistry and Molecularly Imprinted Membranes
Donato, L., Nasser, I. I., Majdoub, M., & Drioli, E. (2022) · Membranes · doi:10.3390/membranes12050472 · Cited by 54
Scaffold design considerations for peripheral nerve regeneration
Yu, L., Bennett, C. J., Lin, C.-H., Su, Y., & Yang, J. Y. (2024) · Journal of Neural Engineering · doi:10.1088/1741-2552/ad628d · Cited by 58
“In general, PLGA has a degradation rate ranging from a few weeks up to 24 months (PLLA) depending on the ratio of lactide and glycolide, and molecular weight of the copolymer [179, 180].”
3D Printing Applications for Craniomaxillofacial Reconstruction: A Sweeping Review
Slavin, B. V., Ehlen, Q. T., Costello, J. P., Nayak, V. V., Bonfante, E. A., Jalkh, E. B. B., Runyan, C. M., Witek, L., & Coelho, P. G. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01171 · Cited by 47
Morales, J., Michell, R. M., Sommer-Márquez, A. E., & Rodrigue, D. (2023) · Journal of Composites Science · doi:10.3390/jcs7040150 · Cited by 30
Ehlen, Q. T., Costello, J. P., Mirsky, N. A., Slavin, B. V., Parra, M., Ptashnik, A., Nayak, V. V., Coelho, P. G., & Witek, L. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01279 · Cited by 29
“90,93 With respect to PLA, it has been recently studied in critically sized mouse femoral defects in the form of multilayered nanosheets loaded with recombinant human fibroblast growth factor-2 (rhFGF-2).”
InfluentialZhu, X., Chen, F., Cao, H., Li, L., He, N., & Han, X. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.685 · Cited by 31
“Of many commonly used FDM-printable biomaterials, polylactic acid (PLA) and polycaprolactone (PCL) are broadly employed in biomedical fields due to their biodegradability, printability, and adjustable mechanical properties[17,18].”
BackgroundZhang, G., Li, L., Jiang, W., Han, X., Hu, Y., Han, Y., Zhao, G., & Feng, Y. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112764 · Cited by 30
Biopolymers: a comprehensive review of sustainability, environmental impact, and lifecycle analysis
Kogje, M., Satdive, A. M., Mestry, S. U., & Mhaske, S. T. (2025) · Iranian Polymer Journal · doi:10.1007/s13726-024-01449-9 · Cited by 40
“Figure 4 [58, 60] provides routes of synthesis of PLA.”
Natural Active Ingredients for Poly (Lactic Acid)-Based Materials: State of the Art and Perspectives
Lombardi, A., Fochetti, A., Vignolini, P., Campo, M., Durazzo, A., Lucarini, M., Puglia, D., Luzi, F., Papalini, M., Renzi, M., et al. (2022) · Antioxidants · doi:10.3390/antiox11102074 · Cited by 27
Effect of the chain length of geraniol esters on the plasticization efficiency with poly(lactide)
Gómez-Caturla, J., Martínez, J. I., Oliveros, R. T., Moreno, V., García‐García, D., & Balart, R. (2023) · Polymer · doi:10.1016/j.polymer.2023.126522 · Cited by 29
Tubio, C. R., Valle, X., Carvalho, E. O., et al. (2023) · Polymers · doi:10.3390/polym15234566 · Cited by 24
Degradation of Structurally Modified Polylactide under the Controlled Composting of Food Waste
Трофимчук, Е. С., Ostrikova, V. V., Ivanova, O. A., Moskvina, M. A., Plutalova, A. V., Grokhovskaya, T. Y., Shchelushkina, A. A., Efimov, A., Chernikova, E. V., Zhang, S., et al. (2023) · Polymers · doi:10.3390/polym15194017 · Cited by 29
“The known approaches to produce PLA with high performance properties are based on (1) the copolymerization of lactide with various monomers [7,8]; (2) the addition of plasticizers [9,10] ; (3) mixing PLA with other polymers or particles of inorganic nature [11–13] ; and (4) using structural and…”
MethodGu, X., Cui, M., Wang, B., Zhang, C., Zhu, Y., Jin, X., Wang, R., & Zhang, X. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202200441 · Cited by 22
Fuente-Ballesteros, A., Ares, A. M., & Bernal, J. (2025) · Green Analytical Chemistry · doi:10.1016/j.greeac.2025.100221 · Cited by 25
Mechanical Property Prediction of Poly(Lactic Acid) Blends Using Deep Neural Network
Fatriansyah, J. F., Surip, S. N., & Hartoyo, F. (2022) · Evergreen · doi:10.5109/4774229 · Cited by 24
Gu, X., Cui, M., Wang, B., Liu, G., Zhang, J., Wang, R., & Zhang, X. (2024) · ACS Omega · doi:10.1021/acsomega.3c08789 · Cited by 21
“13 The reason why PLLA has a piezoelectric effect is because its molecule contains C � O dipoles, the positive and negative centers of the dipole do not overlap, the C atom in C � O is positively charged, and the O atom is negatively charged, resulting in a potential difference.”
BackgroundMusioł, M., Rydz, J., Janeczek, H., Andrzejewski, J., Cristea, M., Musioł, K., Kampik, M., & Kowalczuk, M. M. (2024) · Polymers · doi:10.3390/polym16162331 · Cited by 19
Shahroodi, Z., Momeni, V., Moshkriz, A., Rajabifar, N., & Darvishi, R. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400209 · Cited by 15
Zhou, D., Wu, F., Peng, Y., et al. (2023) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-023-02350-y · Cited by 16
Zhang, R., Tang, L., Ji, X., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132188 · Cited by 16
Weng, C., Li, X., & Tang, X. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202415388 · Cited by 18
Properties of PLA-co-PBSu Copolymers Rapidly Synthesized by Reactive Processing
Terzopoulou, Z. N., Zamboulis, A., Bikiaris, N. D., Margellou, A. G., Valera, M. Á., Mangas, A., Koltsakidis, S., Tsongas, K., Tzetzis, D., & Triantafyllidis, K. S. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02981-0 · Cited by 15
Toward the production of block copolymers in microbial cells: achievements and perspectives
Matsumoto, K. (2024) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-023-12973-8 · Cited by 15
“Furthermore, poly( d -LA) (PDLA) is an attractive block copolymer component due to the stereo-complex formation with PLLA (Stefaniak and Masek 2021).”
BackgroundAdvanced Design Concepts for Shape-Memory Polymers in Biomedical Applications and Soft Robotics
Fetisova, A. A., Surmeneva, M. A., & Анатольевич, С. Р. (2026) · Polymers · doi:10.3390/polym18020214 · Cited by 18
A New Self-Healing Degradable Copolymer Based on Polylactide and Poly(p-dioxanone)
Tong, L., Zhou, M., Chen, Y., Lu, K., Zhang, Z., Mu, Y., & He, Z. (2023) · Molecules · doi:10.3390/molecules28104021 · Cited by 14
Desai, H., Mehta, T. A., & Shah, N. (2023) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2023.2209644 · Cited by 17
Polylactide/poly(vinyl monomer) block copolymers for specific applications
Bednarek, M., & Grabowski, M. (2024) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2024.2310105 · Cited by 15
Neal, T. J., Neal, E. D., Cumby, J., & Garden, J. A. (2024) · Polymer Chemistry · doi:10.1039/d4py00169a · Cited by 12
Łączny, D., Macko, M., Moraczewski, K., et al. (2021) · Materials · doi:10.3390/ma14237281 · Cited by 12
Paul, A., Sreedevi, K., Sharma, S. S., & Anjana, V. N. (2023) · Springer eBooks · doi:10.1007/978-981-19-0710-4_44 · Cited by 12
Sagar, S., Nath, P., Ray, A., Sarkar, A., & Panda, T. K. (2024) · Dalton Transactions · doi:10.1039/d4dt01054j · Cited by 13
Ghasemi, S., Zare, N., Ghezelsofloo, M., et al. (2025) · Catalysis Surveys from Asia · doi:10.1007/s10563-024-09445-y · Cited by 11
Applications of Piezoelectric Materials in Biomedical Engineering
Wang, Z., Wang, Y., Yang, C., Zheng, T., Luo, R., & Wang, Y. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500033 · Cited by 16
Bahramian, B., Abedi‐Firoozjah, R., Salari, A., Mahmoudzadeh, M., Mazloomi, S. M., Rezaie, M., Ehsani, A., Tavassoli, M., & Jafari, S. M. (2025) · Future Foods · doi:10.1016/j.fufo.2025.100802 · Cited by 18
Mohammadi, M., Li, Y., Randall, J., Nofar, M., Heuzey, M., & Carreau, P. J. (2023) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24853 · Cited by 11
Sirisinha, K., Wirasate, S., Sirisinha, C., & Wattanakrai, N. (2022) · Polymers · doi:10.3390/polym14173642 · Cited by 9
Belluomo, R., Arriola-Alvarez, I., Kucko, N. W., Walsh, W. R., de Bruijn, J. D., Oliver, R. A., Wills, D., Crowley, J. D., Wang, T., & Groot, F. B. (2022) · Materials · doi:10.3390/ma15041346 · Cited by 9
Amination of polylactic acid to alanine using a Ru–Co bimetallic catalyst
Cui, M., Liu, G., Ma, C., et al. (2024) · New Journal of Chemistry · doi:10.1039/d4nj00473f · Cited by 7
Shin, H., & Seo, J. (2025) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2025.102023 · Cited by 13
One-pot synthesis of liquid photocrosslinkable poly( l -lactide) with terminal triacrylate
Yu, C.-F., Rwei, S., & Shu, Y. (2023) · RSC Advances · doi:10.1039/d2ra05937a · Cited by 6
Review: Syntheses of poly(lactic acid)s and their block copolymers for drug delivery applications
Oktavia, L. W., Bégué, D., Campana, P. T., & Hiorns, R. C. (2023) · Polymer International · doi:10.1002/pi.6529 · Cited by 7
Optimized Synthesis of Poly(Lactic Acid) Nanoparticles for the Encapsulation of Flutamide
Almeida, D., Dias, M., Teixeira, B. F. R., Frazão, C., Almeida, M., Gonçalves, G., Oliveira, M., & Pinto, R. J. B. (2024) · Gels · doi:10.3390/gels10040274 · Cited by 6
“…[12,14,15], in large part due to their adequate biodegradability and ability to carry active compounds like hormones, vaccines, and anesthetics, which make them particularly popular among other polymeric NPs for controlled drug release [12,16], and even more so for cancer therapy [14,16–18].”
BackgroundZeolite Catalysts for Biomass Valorization: Tuning of active sites for promoting reactivity
Singh, O., Samanta, C., Kustov, L. M., & Pinard, L. (2024) · Catalysis Reviews · doi:10.1080/01614940.2024.2387535 · Cited by 10
Oxidative stability of chelated Sn(II) (aq) at neutral pH: The critical role of NO 3 − ions
Zhang, S., Govindaraju, G. V., Cheng, C., Daep, C. A., Chen, D., Castro, C., Corrigan, P. S., Masters, J. G., Pan, L., Xu, G., et al. (2024) · Science Advances · doi:10.1126/sciadv.adq0839 · Cited by 9
“Tin(II) compounds have broad commercial applications, often used as catalysts for small molecule ( 1 ) and polymer synthesis ( 2 , 3 ), as oxidative stabilizers ( 4 , 5 ), as reducing agents for technetium-99m within radiopharmaceutical kits in therapeutic applications ( 6 , 7 ), or as…”
BackgroundExploring the effect of hemp fibers’ addition on the properties of PLA/PPAd biodegradable blends
Xanthopoulou, E., Pardalis, N., Zamboulis, A., & Bikiaris, D. Ν. (2024) · Sustainable Chemistry for the Environment · doi:10.1016/j.scenv.2024.100176 · Cited by 8
Mulchandani, N., Masutani, K., Kumar, S., Sakurai, S., Kimura, Y., & Katiyar, V. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104040 · Cited by 7
Jasik, K., Śnieżek, L., Kluczyński, J., Łuszczek, J., Grzelak, K., Sarzyński, B., & Szachogłuchowicz, I. (2024) · Materials · doi:10.3390/ma17122801 · Cited by 7
“Initially, various polymers, mainly polylactic acid (PLA) [5–8], polyamide-based (PA) [9–11], and acrylonitrile–butadiene–styrene copolymer (ABS) [12], were the materials of choice for AM.”
BackgroundGhani, N. A., Maran, S., Kadir, M. R. A., Somasundaram, S., Raghavendran, H. R. B., & Kamarul, T. (2025) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2025.2460370 · Cited by 7
“These aspects include the ratio of lactic and glycolic acids, molecular weight, device size, and the storage temperature [91, 92].”
Toward a Greener Bioeconomy: Synthesis and Characterization of Lignin–Polylactide Copolymers
Langletz, T., Grande, P. M., Viell, J., Wolters, D., Tonn, J., Klose, H., Schriever, S., Hoffmann, A., Jupke, A., Gries, T., et al. (2023) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202300187 · Cited by 5
Sivri, S., Sezgi, N. A., & Dilek, Ç. (2024) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2024.106473 · Cited by 6
Zanoni, A., Tollini, F., Casiraghi, C., Storti, G., Sponchioni, M., & Moscatelli, D. (2022) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24800 · Cited by 5
Study on the Tensile Behavior of Woven Non-Woven PLA/OLA/MgO Electrospun Fibers
Leonés, A., Peponi, L., García‐Martínez, J., & Collar, E. P. (2023) · Polymers · doi:10.3390/polym15193973 · Cited by 5
Mimicking the neural stem cell niche: An engineer’s view of cell: material interactions
Yazdani, N., & Willits, R. K. (2023) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.1086099 · Cited by 5
Synthesis and Characterization of Poly(DL-lactide) Containing Fluorene Structures
Yu, C.-F., Rwei, S., Yang, S., Tsen, W., & Lin, L. (2023) · Polymers · doi:10.3390/polym15112555 · Cited by 5
“PLA finds applications in various fields such as consumer goods, packaging, agriculture, and biomedicine, and it is currently gaining popularity [1–4].”
BackgroundHuang, W., Wen, X., Zhou, J., & Zhang, X. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.241 · Cited by 4
Yessa, E. Y., Wientarsih, I., Ulum, M. F., Purwantara, B., & Amrozi, A. (2024) · Livestock and Animal Research · doi:10.20961/lar.v22i1.72985 · Cited by 3
“[55].”
Weng, C., Li, X., & Tang, X. (2024) · Angewandte Chemie · doi:10.1002/ange.202415388 · Cited by 3
Paul, A., Sreedevi, K., Sharma, S. S., & Anjana, V. N. (2022) · Springer eBooks · doi:10.1007/978-981-16-6603-2_44-1 · Cited by 7
A Preliminary Review of Poly(lactic acid)-based Biodegradable Foam and its Techno-economic Model
Yudanto, Y. A., & Opaprakasit, P. (2023) · E3S Web of Conferences · doi:10.1051/e3sconf/202344803076 · Cited by 4
Microencapsulation of Analgesics as an Analog Form of Medicine
Nakipekova, A., Kudaibergenova, B. M., Abdurashitov, A. S., & Sukhorukov, G. B. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17070916 · Cited by 2
“However, copolymer-izing PLA with other polymers enhances its characteristics, allowing for the creation of a desired material with preferred physical properties [32,34].”
Biodegradable polymer-based active packaging for perishable foods in the tropics: A review
Awobifa, O. S., Alimi, A. A., Adesina, G. O., Kayode, S. E., Villegas-Méndez, J. R., Adeoye, E. O., & Faleye, B. R. (2026) · Food and Humanity · doi:10.1016/j.foohum.2026.100997 · Cited by 4
Polylactide, Polycaprolactone, and Rice Husk—Biocomposites for Biomedical and Packaging Applications
Amin, A., Larrañaga, X., Mohamed, A. T., et al. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70630 · Cited by 2
Bio-based and biodegradable materials for droplet microfluidic encapsulation
Zhang, Z., Qian, H., Shen, C., Lu, J., Cui, L., Shi, X., Hu, Y., Gao, W., & Wu, S. (2026) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2026.2661669 · Cited by 2
A Temperature-Transferable Coarse-Grained Model for Poly(lactic Acid) Melts
Prasitnok, O., & Prasitnok, K. (2024) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.4c03534 · Cited by 2
Isobornyl and Isocamphyl Photostabilizers in Poly(lactic acid)-Based Electrospun Fibers
Белый, В. А., Kuzivanov, I. M., Федорова, И. В., et al. (2024) · Polymers · doi:10.3390/polym16060855 · Cited by 1
“Polylactide (PLA) is a biocompatible aliphatic polyester derived from lactic acid, obtained through the enzymatic processing of plants [2–4].”
BackgroundWang, J., Zhang, Y., Zuo, Y., Fu, Z., Jia, S., & Zhang, H. (2025) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2025.2514001 · Cited by 2
Antioxidants in biodegradable food packaging polymer materials – a review
Borkowski, M., & Kępka-Borkowska, K. (2025) · Polimery · doi:10.14314/polimery.2025.7.1 · Cited by 3
Hydrogels for 3D-printed breast scaffolds on esthetic, functional, and oncological safety: A review.
Li, Z., Wang, S.-Q., & Tan, Q. (2026) · Journal of Applied Biomaterials & Functional Materials · doi:10.1177/22808000261431929 · Cited by 1
Babu, A. S., Krishnadas, A., Manju, V., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505383 · Cited by 1
Abo, L. D., Yemane, T. H., Sivagurulingam, A. P. A., Prasad, N., Jayakumar, M., & Molla, N. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109307 · Cited by 3
Special Issue: “Polymer-Based Biomaterials and Tissue Engineering”
Serra, R. S. I., & Serrano‐Aroca, Á. (2023) · Materials · doi:10.3390/ma16144923 · Cited by 1
Yoon, H., Kim, T., Kim, J. H., Kim, J. M., & Sohn, E. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114189 · Cited by 1
Luchian, A. M., Mariş, M., Zaharescu, T., Marinescu, V. E., & Iovu, H. (2022) · Materials · doi:10.3390/ma15145080 · Cited by 1
Polymer-Based Biomaterials and Tissue Engineering
Sabater i Serra, R., & Serrano-Aroca, Á. (2023) · MDPI eBooks · doi:10.3390/books978-3-0365-8236-8
Study of the antibacterial activity of citronella oil fractions on polylactic acid-based packaging
Septiyanti, M., Agustian, E., Meliana, Y., Ghozali, M., Triwulandari, E., Sampora, Y., Devy, Y. A., Sondari, D., & Septevani, A. A. (2023) · AIP conference proceedings · doi:10.1063/5.0173452
Oliveros, R. T. (2023) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/201561 · Cited by 1
Biopolymeric additive manufacturing: The bidirectional interplay of synthetic and natural systemsPreprint
Lew, A. J., Lai, A. F., & Wyman, S. P. (2024) · Preprints.org · doi:10.20944/preprints202403.0657.v1
Gómez-Caturla, J. (2024) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/203217 · Cited by 1
Condensed matter chemistry in polymer materials
Zhang, W., & Song, Y. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-16140-7.00004-3
Foaming Behavior and Water Absorption-Desorption Cycle of Polylactide for Food Packaging
Yudanto, Y. A., Afrianto, A. W., & Opaprakasit, P. (2024) · Indonesian Food Science and Technology Journal · doi:10.22437/ifstj.v7i2.31951
“…soy, potatoes, or whey—a by-product of the dairy industry—via ring-opening polymerization of lactide, exhibits favorable mechanical properties over extended storage periods and under controlled environmental conditions (relative humidity and temperature), durability, and transparency [13, 14].”
BackgroundNon‐Porous Hydrogel Scaffolds for Locoregional Chemotherapy: A One‐Pot Synthesis Approach
Kağa, S., & Ergüner, G. F. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500002
Jullin, A., Bounor‐Legaré, V., & Espuche, É. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c00528
Zhu, Y., Yan, H., Wang, B., Shangguan, Z., & Yao, J. (2025) · Materials · doi:10.3390/ma18204816
“Poly(lactic acid) (PLA) is extensively utilized in various clinical medicine applications due to its exceptional biocompatibility and biodegradability [1–4].”
Metadata
- Authors
- Stefaniak, K., & Masek, A.
- Affiliations
- Lodz University of Technology (PL)
- Corresponding author
- Masek, Anna
- ORCID
- Masek, Anna
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-09-13
- Volume
- 14
- Issue
- 18
- Pages
- 5254
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC8469957
- OpenAlex
- W3199095581
- Cited by
- 109
- References
- 103
- Citations by year
- 2026: 13 · 2025: 16 · 2024: 32 · 2023: 27 · 2022: 20 · 2021: 1
- FWCI
- 1.38
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, other-oa)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- polylactic acid, biodegradable polymers, ring-opening polymerization, stannous octoate catalyst, direct polycondensation, star polymers, branched polymers, graft copolymers, block copolymers, biomedical applications, packaging materials, renewable resources
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.