Green Copolymers Based on Poly(Lactic Acid)—Short Review
Open accessThe DOI matches its Crossref record; 100 of the 103 references it cites were found in a registry or an index; 29 of the 160 sources its claims cite were checked for support.
Abstract
Polylactic acid (PLA) is a biodegradable and biocompatible polymer that can be applied in the field of packaging and medicine. Its starting substrate is lactic acid and, on this account, PLA can also be considered an ecological material produced from renewable resources. Apart from several advantages, polylactic acid has drawbacks such as brittleness and relatively high glass transition and melting temperatures. However, copolymerization of PLA with other polymers improves PLA features, and a desirable material marked by preferable physical properties can be obtained. Presenting a detailed overview of the accounts on the PLA copolymerization accomplishments is the innovation of this paper. Scientific findings, examples of copolymers (including branched, star, grafted or block macromolecules), and its applications are discussed. As PLA copolymers can be potentially used in pharmaceutical and biomedical areas, the attention of this article is also placed on the advances present in this field of study. Moreover, the subject of PLA synthesis is described. Three methods are given: azeotropic dehydrative condensation, direct poly-condensation, and ring-opening polymerization (ROP), along with its mechanisms. The applied catalyst also has an impact on the end product and should be adequately selected depending on the intended use of the synthesized PLA. Different ways of using stannous octoate (Sn(Oct)2) and examples of the other inorganic and organic catalysts used in PLA synthesis are presented.
Overview
CoChat Summary
## TL;DR
This review surveys poly(lactic acid) (PLA) as a biodegradable, renewable polymer and argues that copolymerization is the main route to overcome PLA’s brittleness and other property limits. It summarizes PLA synthesis methods, catalysts, and a wide range of PLA copolymers, especially for packaging and biomedical uses.
## Key findings
- PLA is presented as a biodegradable, biocompatible polymer made from lactic acid, which can be obtained from renewable feedstocks such as sweetcorn, rice, soya, potatoes, whey, and food-industry waste.
- The review states that PLA copolymerization can improve key properties: copolymerizing with PGA, PEG, or glycidol shortens degradation time; PCL-PLA improves elongation at break; and graft copolymers have lower crystallinity and higher degradation rates than linear PLA.
- For PLGA, the paper reports that copolymerization of lactic acid with glycolic acid can shorten degradation time by as much as three-fold, from 6 to 2 months.
- For PLA/glycidol copolymers, the paper reports a decrease in water contact angle from 95.7° for linear PLA to 62.4° for a copolymer containing 20 mol% glycidol, alongside a melting-temperature drop of over 30 °C.
- For one PCL-PLA blend, the paper reports elongation at break improving from 7.1% for neat PLA to 210.7% with 15 wt % PCL-PLA copolymer.
## Methods
- Narrative short review of published studies on PLA, its synthesis, catalysts, copolymers, and applications.
- The paper synthesizes findings from prior literature rather than presenting a new experimental dataset; the text repeatedly cites prior work and reports their measured values.
- Main analysis is qualitative comparison of synthesis routes, catalyst systems, copolymer architectures, and reported property changes such as molecular weight, crystallinity, degradation, and mechanical performance.
## Limitations
- The paper itself states that PLA still has drawbacks, including brittleness, relatively high glass transition and melting temperatures, hydrophobicity, and a need for better gas barrier properties.
- The review explicitly says more research is needed on safer, faster, and more stable catalysts, especially biocompatible catalysts for biomedical applications.
- Evident from the text: this is a short review with uneven coverage; several subsections are only briefly treated or left blank, so it does not provide a complete experimental comparison of all PLA copolymers.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Two lactic acid isomers [13].](https://figures.cochat.ai/paper-figures/59ae9d81e8804dfe887ec4cf1ac165b8/green-copolymers-based-on-poly-lactic-acid-short-review-figure-1.jpg)
![Figure 2 Scheme presenting the method of producing LA from acetic aldehyde using hydrogen cyanide [5].](https://figures.cochat.ai/paper-figures/cdf7303953954552854f409efee8489b/green-copolymers-based-on-poly-lactic-acid-short-review-figure-2.jpg)
![Figure 3 Scheme presenting receiving lactic acid [5].](https://figures.cochat.ai/paper-figures/3d8e9fb5bc0a433c818e458a679a3e26/green-copolymers-based-on-poly-lactic-acid-short-review-figure-3.jpg)
![Figure 4 Chemical structure of PLA [5].](https://figures.cochat.ai/paper-figures/c18fdefcf67f43129e7acb4f20b83b86/green-copolymers-based-on-poly-lactic-acid-short-review-figure-4.jpg)
![Figure 5 Glass transition temperatures (Tg) of PLA polymers with different L-stereoisomer contents as a function of number-average molecular weights (Mn). Symbols on the legend represent the L/D-isomers ratios [20].](https://figures.cochat.ai/paper-figures/a2bac1fbad0f4c7ca6e4b1b7a506f570/green-copolymers-based-on-poly-lactic-acid-short-review-figure-5.jpg)
![Figure 6 Manufacturing routes to polylactic acid [26].](https://figures.cochat.ai/paper-figures/d00319138471413badef5ae048b7794b/green-copolymers-based-on-poly-lactic-acid-short-review-figure-6.jpg)
![Figure 7 Flow diagram of the azeotropic dehydrative polycondensation of LA [28].](https://figures.cochat.ai/paper-figures/262e40e0e1564ce3be1d00bc751a41fb/green-copolymers-based-on-poly-lactic-acid-short-review-figure-7.jpg)
![Figure 8 Lactide—cyclic dimers for the ROP process [7].](https://figures.cochat.ai/paper-figures/1b2ff2e87dbe41b7a55c887c215a6b6d/green-copolymers-based-on-poly-lactic-acid-short-review-figure-8.jpg)
![Figure 9 Possible positions of breaking lactide ring [5].](https://figures.cochat.ai/paper-figures/3b35f183393743bc9d6f9af2c9375731/green-copolymers-based-on-poly-lactic-acid-short-review-figure-9.jpg)
![Figure 10 Cationic ring-opening polymerization mechanism for PLA [21].](https://figures.cochat.ai/paper-figures/da98f188ab094383b5caa4b0c9cc64c0/green-copolymers-based-on-poly-lactic-acid-short-review-figure-10.jpg)
![Figure 11 Anionic ring-opening polymerization mechanism for PLA [5].](https://figures.cochat.ai/paper-figures/d7313da7bb154ca595ca1d14111bdf48/green-copolymers-based-on-poly-lactic-acid-short-review-figure-11.jpg)
![Figure 12 Coordinative ring-opening polymerization mechanism for PLA [5].](https://figures.cochat.ai/paper-figures/63cb8130afd44475a8bab90a0f69ebcc/green-copolymers-based-on-poly-lactic-acid-short-review-figure-12.jpg)
![Figure 13 Structure of organometallic catalysts and organocatalysts used in PLA polymerization [6].](https://figures.cochat.ai/paper-figures/3851e8571c70492598f078d0f21fb75d/green-copolymers-based-on-poly-lactic-acid-short-review-figure-13.jpg)
![Figure 14 Summary of the selected polymer and copolymer architectures [50,51,52].](https://figures.cochat.ai/paper-figures/2ec1af5e5ebb4fdbadd3b836579e6de8/green-copolymers-based-on-poly-lactic-acid-short-review-figure-14.jpg)
![Figure 15 Chemical structure of LA, LG, and PLGA [53].](https://figures.cochat.ai/paper-figures/dde91214e8304c9db45a9ba861b2a46c/green-copolymers-based-on-poly-lactic-acid-short-review-figure-15.jpg)
![Figure 16 Approaches to sequenced and random PLGAs: (a) DIC = diisopropylcarbodiimide; (b) DPTS = 4-(dimethylamino) pyridinium ptoluenesulfonate. LG, LL, GG and GL are the different dimer units [58].](https://figures.cochat.ai/paper-figures/e8840ec63dca4b5286980c2032c67e87/green-copolymers-based-on-poly-lactic-acid-short-review-figure-16.jpg)
![Figure 17 ATRP Equilibrium; kp—propagation reaction rate constant; kt—termination reaction rate constant [64].](https://figures.cochat.ai/paper-figures/5e003feecea8428bb81e9ae07fbc4a05/green-copolymers-based-on-poly-lactic-acid-short-review-figure-17.jpg)
![Figure 18 Chemical structure of PEG [66].](https://figures.cochat.ai/paper-figures/237be93ef7984f1fb9b4b12af9cc51a6/green-copolymers-based-on-poly-lactic-acid-short-review-figure-18.jpg)
![Figure 19 Scheme of PEG-(PLLAn)8-AC synthesis [68].](https://figures.cochat.ai/paper-figures/6260c17375104e7baa8548d48ecc7114/green-copolymers-based-on-poly-lactic-acid-short-review-figure-19.jpg)
![Figure 20 Chemical structure of diPCLPLA block copolymer [75].](https://figures.cochat.ai/paper-figures/3f30b09ebbdf41e3b20aa8d3d90aad2c/green-copolymers-based-on-poly-lactic-acid-short-review-figure-20.jpg)
![Figure 21 Structure of POSS(PLLA-b-PNIPAM) block copolymer [81].](https://figures.cochat.ai/paper-figures/ee796665d5f74aee802891a3fa3294bf/green-copolymers-based-on-poly-lactic-acid-short-review-figure-21.jpg)
![Figure 22 Synthesis of graft polymer PLA (PGA) on PVA by “grafting from” method [82].](https://figures.cochat.ai/paper-figures/23339f713c7e41c88ca0696a1ec40ffb/green-copolymers-based-on-poly-lactic-acid-short-review-figure-22.jpg)
![Figure 23 Mechanism of branched polymer formation by ring-opening copolymerization of lactide with glycidol [84].](https://figures.cochat.ai/paper-figures/0285aea7c8fb428b81c41eaf08239318/green-copolymers-based-on-poly-lactic-acid-short-review-figure-23.jpg)
![Figure 24 Synthesis of graft polymer PLA onto poly(LA/CGS-OBz) by the generation of initiating groups and the “grafting from” method [86].](https://figures.cochat.ai/paper-figures/5a3abe4b998f4597a1db301f74c1a8b6/green-copolymers-based-on-poly-lactic-acid-short-review-figure-24.jpg)
![Figure 25 The process of repairing bone defects with the use of BMP/polymer composites [92].](https://figures.cochat.ai/paper-figures/1d1f5d81c78f46719de1f3ce58cafe41/green-copolymers-based-on-poly-lactic-acid-short-review-figure-25.jpg)
Verification
Claims the paper makes
24 Valid · 8 Not valid · 121 Not checked · 44 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“There is also the possibility of receiving lactic acid as a result of its fermentation from food industry waste products (potatoes, sweetcorn, sugar beet) and proper bacteria (Streptococcus, Pediococcus, Lactobacillus, Bifidobacterium) [14,15,16].”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 2. Lactic Acid (LA)—PLA Monomer
What the sources say
- Partly supportedcites [14] Foltynowicz Z. Jakubiak P. Polylactid acid—Biodegradable polymer obtained from vegetable resources Polimery 2002 47 769 774 10.14314/polimery.2002.769 sourceExperimental — accuracy not yet measured
The methods section (p. 1) says lactic acid can be produced by fermenting carbohydrates such as starch using Lactobacillus bacteria. It does not identify food-industry waste as a feedstock or name Streptococcus, Pediococcus, or Bifidobacterium, so those details in the citing sentence are not supported by this paper. (LLM, conf=0.88)
- Not matchedcites [15] Jankiewicz M. Zastosowanie Kwasu Mlekowego i Jego Pochodnych Akademia Rolnicza w Poznaniu, PWN Poznań, Poland 1995
We searched by its title and found no matching paper.
- Not matchedcites [16] Schlegel H.G. Mikrobiologia Ogólna PWN Warsaw, Poland 2003
We searched by its title and found no matching paper.
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The applied catalyst also has an impact on the end product and should be adequately selected depending on the intended use of the synthesized PLA.”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > Abstract
What the sources say
- Could not verifycites [9] Mehta R. Kumar V. Bhunia H. Upadhyay S.N. Synthesis of Poly(Lactic Acid): A Review J. Macromol. Sci. Part C 2005 45 325 349 10.1080/15321790500304148 sourceExperimental — accuracy not yet measured
The paper-scoped search returned no full-text snippets for Mehta’s *Synthesis of Poly(Lactic Acid): A Review* under either catalyst-related query. An abstract was not available to assess, so the review’s title alone cannot establish that it makes the specific point about selecting catalysts for intended PLA uses. The strongest unscoped matches (scores 0.443 and 0.431) are in other papers and do not substantiate an attribution error. (LLM, conf=0.70)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
Every source the paper cites for this claim was checked and supports it.
In the paper
“The azeotropic dehydration condensation reaction of LA provides high molecular weight PLA without the use of chain extenders or adjuvants [10].”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 4. PLA Synthesis—Methods > 4.2. Azeotropic Dehydrative Condensation
What the sources say
- Supportedcites [10] Hamad K. Kaseem M. Yang H.W. Deri F. Ko Y.G. Properties and medical applications of polylactic acid: A review Express Polym. Lett. 2015 9 435 455 10.3144/expresspolymlett.2015.42 source
Section 2, “Synthesis of polylactic acid,” explicitly describes azeotropic dehydration condensation of lactic acid as a method for yielding high-molecular-weight PLA without chain extenders or adjuvants. The cited claim closely paraphrases that statement. (LLM, conf=0.93)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Additionally, miktoarm star polymers, PLLA/PEG, were reported to form thermo-responsive hydrogels in water at high concentrations (22.5 wt %) [69].”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 6. PLA Copolymers > 6.3. PEG-PLA Copolymer
What the sources say
- Supportedcites [69] Velthoen I.W. Tijsma E.J. Dijkstra P.J. Feijen J. Thermo-Responsive Hydrogels Based on Branched Poly(L-lactide)-poly(ethylene glycol) Copolymers Macromol. Symp. 2008 272 13 27 10.1002/masy.200851202 source
The Gel Formation section reports that the branched PLLA–PEG copolymers formed temperature-responsive hydrogels in water and required at least 22.5–27.5 wt% copolymer, depending on the copolymer. The Conclusion likewise describes hydrogel formation at high concentrations; 22.5 wt% is the lower end of the reported threshold range, not a threshold for every copolymer. Page numbers were not provided in our copy. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The microspheres obtained had a porous structure inside, which advanced drug release.”
§ Green Copolymers Based on Poly(Lactic Acid)—Short Review > 7. PLA Applications
What the sources say
- Supportedcites [90] Li G. Zhao M. Xu F. Yang B. Li X. Meng X. Teng L. Sun F. Li Y. Synthesis and Biological Application of Polylactic Acid Molecules 2020 25 5023 10.3390/molecules25215023 PMC7662581 33138232 source
The Drug Delivery section directly states that the paclitaxel-containing PLA–PEG–PLA microspheres had a porous interior that promoted drug release. This matches the attributed claim. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
96 more claims · 11 with their cited sources checked
Create a free account to see all 197 claims and every source verdict.
- Probably not a substantial claim. 42
- It may state two separate claims as one. 61
- The quote only partly states this claim. 3
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Atom Transfer Radical Polymerization (ATRP): Current Status and Future Perspectives
Matyjaszewski, K. (2012) · Macromolecules · doi:10.1021/ma3001719 · Cited by 2,606
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Nanocapsule formation by interfacial polymer deposition following solvent displacement
Fessi, H., Puisieux, F., Devissaguet, J. P., Ammoury, N., & Benita, S. (1989) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(89)90281-0 · Cited by 2,288
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
Glossary of basic terms in polymer science (IUPAC Recommendations 1996)
Jenkins, A. D., Kratochvíl, P., Stepto, R. F. T., & Suter, U. W. (1996) · Pure and Applied Chemistry · doi:10.1351/pac199668122287 · Cited by 661
The development and challenges of poly (lactic acid) and poly (glycolic acid)
Jem, K. J., & Tan, B. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.002 · Cited by 615
Kricheldorf, H. R., Berl, M., & Scharnagl, N. (1988) · Macromolecules · doi:10.1021/ma00180a002 · Cited by 597
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications
Casalini, T., Rossi, F., Castrovinci, A., & Perale, G. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00259 · Cited by 500
Synthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492
Biodegradable and biocompatible polymers for tissue engineering application: A review
Asghari, F., Samiei, M., Adibkia, K., Akbarzadeh, A., & Davaran, S. (2017) · Artificial Cells, Nanomedicine, and Biotechnology · doi:10.3109/21691401.2016.1146731 · Cited by 482
Dubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Applications of Polymer Nanofibers in Biomedicine and Biotechnology
Venugopal, J., & Ramakrishna, S. (2005) · Applied Biochemistry and Biotechnology · doi:10.1385/abab:125:3:147 · Cited by 370
Cationic activated monomer polymerization of heterocyclic monomers
Kubisa, P., & Penczek, S. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(99)00028-3 · Cited by 298
Synthesis of high‐molecular‐weight poly(L‐lactide) initiated with tin 2‐ethylhexanoate
Leenslag, J. W., & Pennings, A. J. (1987) · Die Makromolekulare Chemie · doi:10.1002/macp.1987.021880804 · Cited by 290
Melt rheology of variable L-content poly(lactic acid)
Dorgan, J. R., Janzen, J., Clayton, M. P., Hait, S. B., & Knauss, D. M. (2005) · Journal of Rheology · doi:10.1122/1.1896957 · Cited by 273
Leroux, J.-C., Allémann, E., De Jaeghere, F., Doelker, E., & Gurny, R. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00164-6 · Cited by 268
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Rancan, F., Papakostas, D., Hadam, S., Hackbarth, S., Delair, T., Primard, C., Verrier, B., Sterry, W., Blume-Peytavi, U., & Vogt, A. (2009) · Pharmaceutical Research · doi:10.1007/s11095-009-9919-x · Cited by 249
Exploiting Sequence To Control the Hydrolysis Behavior of Biodegradable PLGA Copolymers
Li, J., Stayshich, R. M., & Meyer, T. Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200895s · Cited by 249
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.68.2125 · Cited by 245
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Jacobs, C., Dubois, P., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00011a001 · Cited by 218
Zhang, X., MacDonald, D. A., Goosen, M. F. A., & McAuley, K. B. (1994) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1994.080321519 · Cited by 214
Folate-receptor-targeted delivery of docetaxel nanoparticles prepared by PLGA–PEG–folate conjugate
Esmaeili, F., Ghahremani, M. H., Ostad, S. N., Atyabi, F., Seyedabadi, M., Malekshahi, M. R., Amini, M., & Dinarvand, R. (2008) · Journal of Drug Targeting · doi:10.1080/10611860802088630 · Cited by 203
Coordination polymerization of lactides, 1. Structure determination of obtained polymers
Bero, M., Kasperczyk, J., & Jedlinski, Z. J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021911007 · Cited by 190
Biodegradable Poly(Lactic Acid): Synthesis, Modification, Processing and Applications
Ren, J. (2010) · doi:10.1007/978-3-642-17596-1 · Cited by 190
Poly(lactic acid) based hydrogels
Basu, A., Kunduru, K. R., Doppalapudi, S., Domb, A. J., & Khan, W. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.07.004 · Cited by 188
Chemical synthesis of polylactide and its copolymers for medical applications
Bendix, D. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00149-3 · Cited by 187
Jeong, S. I., Kim, B.-S., Lee, Y. M., Ihn, K. J., Kim, S. H., & Kim, Y. H. (2004) · Biomacromolecules · doi:10.1021/bm049921i · Cited by 182
Polylactones, 8. Mechanism of the cationic polymerization of L,L‐dilactide
Kricheldorf, H. R., & Dunsing, R. (1986) · Die Makromolekulare Chemie · doi:10.1002/macp.1986.021870706 · Cited by 167
Vey, E., Rodger, C., Booth, J., Claybourn, M., Miller, A. F., & Saiani, A. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.07.011 · Cited by 164
Gogolewski, S., Jovanovic, M., Perren, S. M., Dillon, J. G., & Hughes, M. K. (1993) · Polymer Degradation and Stability · doi:10.1016/0141-3910(93)90137-8 · Cited by 160
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
New synthetic biodegradable polymers as BMP carriers for bone tissue engineering
Saito, N., & Takaoka, K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00040-1 · Cited by 153
Matsumoto, J., Nakada, Y., Sakurai, K., Nakamura, T., & Takahashi, Y. (1999) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(99)00153-2 · Cited by 137
Microbial Lactic Acid, Its Polymer Poly(lactic acid), and Their Industrial Applications
Jem, K. J., van der Pol, J. F., & de Vos, S. (2010) · Microbiology Monographs · doi:10.1007/978-3-642-03287-5_13 · Cited by 128
Breitenbach, A., & Kissel, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10077-5 · Cited by 117
Jedliński, Z., Wałach, W., Kurcok, P., & Adamus, G. (1991) · Die Makromolekulare Chemie · doi:10.1002/macp.1991.021920914 · Cited by 116
New developments on the ring opening polymerisation of polylactide
Jacobsen, S., Fritz, H. ‐., Degée, P., Dúbois, P., & Jérôme, R. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00053-9 · Cited by 112
Mechanical and Biodegradable Properties of Jute/Flax Reinforced PLA Composites
Ejaz, M., Azad, M. M., Shah, A. U. R., Afaq, S. K., & Song, J.-I. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-1370-y · Cited by 108
GAO, H., WANG, Y., FAN, Y., & MA, J. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.06.010 · Cited by 106
Nowalk, J. A., Fang, C., Short, A. L., Weiss, R. M., Swisher, J. H., Liu, P., & Meyer, T. Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13120 · Cited by 104
Qiu, Z., & Pan, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.11.001 · Cited by 100
Studies on the oridonin-loaded poly(d,l-lactic acid) nanoparticles in vitro and in vivo
Xing, J., Zhang, D., & Tan, T. (2007) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2006.07.001 · Cited by 99
Barón, M., Hellwich, K.-H., Hess, M., Horie, K., Jenkins, A. D., Jones, R. G., Kahovec, J., Kratochvíl, P., Metanomski, W. V., Mormann, W., et al. (2009) · Pure and Applied Chemistry · doi:10.1351/pac-rec-08-01-30 · Cited by 98
Well defined block copolymers of ε‐caprolactone and L‐lactide using Y5(μ‐O)(OiPr)13 as an initiator
Stevels, W. M., Ankoné, M. J. K., Dijkstra, P. J., & Feijen, J. (1995) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1995.021960415 · Cited by 96
Danafar, H., Rostamizadeh, K., Davaran, S., & Hamidi, M. (2017) · Pharmaceutical Development and Technology · doi:10.3109/10837450.2015.1125920 · Cited by 94
Nanoparticulate delivery system of a tyrphostin for the treatment of restenosis
Fishbein, I., Chorny, M., Rabinovich, L., Banai, S., Gati, I., & Golomb, G. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00244-8 · Cited by 89
Synthesis of ABA triblock copolymers of iε-caprolactone and DL-lactide
Song, C. X., & Feng, X. D. (1984) · Macromolecules · doi:10.1021/ma00142a057 · Cited by 88
Lin, P.-L., Fang, H.-W., Tseng, T., & Lee, W.-H. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.10.064 · Cited by 87
Branched aliphatic polyesters by ring-opening (co)polymerization
Bednarek, M. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.02.002 · Cited by 79
Murakami, N., Saito, N., Horiuchi, H., Okada, T., Nozaki, K., & Takaoka, K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10236 · Cited by 77
Synthesis of Novel Comb-Type Polylactide and Its Biodegradability
Tasaka, F., Ohya, Y., & Ouchi, T. (2001) · Macromolecules · doi:10.1021/ma010067m · Cited by 74
Zhang, J., Xu, J., Wang, H., Jin, W., & Li, J. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.002 · Cited by 60
Effects of hydroxyapatite filler on long-term hydrolytic degradation of PLLA/PCL porous scaffolds
Rodenas-Rochina, J., Vidaurre, A., Castilla Cortázar, I., & Lebourg, M. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.04.015 · Cited by 60
Reinbold, J., Uhde, A.-K., Müller, I., Weindl, T., Geis-Gerstorfer, J., Schlensak, C., Wendel, H.-P., & Krajewski, S. (2017) · Molecules · doi:10.3390/molecules22091570 · Cited by 55
Johnson, R. M., & Fraser, C. L. (2004) · Biomacromolecules · doi:10.1021/bm034421v · Cited by 46
Liu, M.-J., Chen, S.-C., Yang, K.-K., & Wang, Y.-Z. (2015) · RSC Advances · doi:10.1039/c5ra04742k · Cited by 45
Wang, X., Xie, X., Cai, C., Rytting, E., Steele, T., & Kissel, T. (2008) · Macromolecules · doi:10.1021/ma702705s · Cited by 44
3D Printable Conducting and Biocompatible PEDOT‐graft‐PLA Copolymers by Direct Ink Writing
Dominguez‐Alfaro, A., Gabirondo, E., Alegret, N., De León‐Almazán, C. M., Hernandez, R., Vallejo‐Illarramendi, A., Prato, M., & Mecerreyes, D. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100100 · Cited by 44
In vitro degradation behavior of biodegradable 4-star micelles
Salaam, L. E., Dean, D., & Bray, T. L. (2006) · Polymer · doi:10.1016/j.polymer.2005.10.134 · Cited by 40
Selected biodegradable polymers - preparation, properties, applications
Golebiewski, J., GIBAS, E., & Malinowski, R. (2008) · Polimery · doi:10.14314/polimery.2008.799 · Cited by 39
Zhang, W., Wang, S., Li, X., Yuan, J., & Wang, S. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.01.019 · Cited by 38
Biomedical Applications of Polylactide (PLA) and Its Copolymers
Giammona, G., & Craparo, E. F. (2018) · Molecules · doi:10.3390/molecules23040980 · Cited by 38
Buwalda, S. J., Dijkstra, P. J., & Feijen, J. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.25945 · Cited by 36
Investigation of Mucoadhesion and Degradation of PCL and PLGA Microcontainers for Oral Drug Delivery
Abid, Z., Mosgaard, M. D., Manfroni, G., Petersen, R. S., Nielsen, L. H., Müllertz, A., Boisen, A., & Keller, S. S. (2019) · Polymers · doi:10.3390/polym11111828 · Cited by 33
Polylactic acid - biodegradable polymer obtained from vegetable resources
FOLTYNOWICZ, Z., & JAKUBIAK, P. (2002) · Polimery · doi:10.14314/polimery.2002.769 · Cited by 29
Liu, F., Zhao, Z., Yang, J., Wei, J., & Li, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.023 · Cited by 29
Improved shape memory performance of star-shaped POSS-polylactide based polyurethanes (POSS-PLAUs)
Gu, S. Y., & Gao, X. F. (2015) · RSC Advances · doi:10.1039/c5ra14742e · Cited by 29
Substituent effect in anionic polymerization of β-lactones initiated by alkali metal alkoxides
Kurcok, P., Matuszowicz, A., Jedliński, Z., Kricheldorf, H. R., Dubois, P., & Jérôme, R. (1995) · Macromolecular Rapid Communications · doi:10.1002/marc.1995.030160709 · Cited by 26
Synthesis and synthetic mechanism of Polylactic acid
Montané, X., Montornés, J. M., Nogalska, A., Olkiewicz, M., Giamberini, M., Garcia‐Valls, R., Badia-Fabregat, M., Jubany, I., & Tylkowski, B. (2020) · Physical Sciences Reviews · doi:10.1515/psr-2019-0102 · Cited by 26
Mao, H., Shipanova-Kadiyala, I., Zhao, Z., Dang, W., Brown, A. M., & Leong, K. W. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/1568562053115426 · Cited by 22
Precision Aliphatic Polyesters via Segmer Assembly Polymerization
Zeng, F., Liang, Y., & Li, Z. (2018) · Molecules · doi:10.3390/molecules23020452 · Cited by 21
Bio-safe synthesis of linear and branched PLLA
Målberg, S., Basalp, D., Finne‐Wistrand, A., & Albertsson, A. (2010) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23884 · Cited by 20
Characterization of Polyethylene Oxide and Sodium Alginate for Oil Contaminated-Sand Remediation
Jung, J., & Hu, J. W. (2017) · Sustainability · doi:10.3390/su9010062 · Cited by 19
Buwalda, S. J., Dijkstra, P. J., & Feijen, J. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100640 · Cited by 17
Star-Shaped and Linear POSS-Polylactide Hybrid Copolymers
Rózga‐Wijas, K., Stańczyk, W. A., Kurjata, J., & Kaźmierski, S. (2015) · Materials · doi:10.3390/ma8074400 · Cited by 17
Ling, Y., & Huang, Y. (2008) · IFMBE Proceedings · doi:10.1007/978-3-540-79039-6_129 · Cited by 17
Karidi, K., Pladis, P., & Kiparissides, C. (2013) · Macromolecular Symposia · doi:10.1002/masy.201300040 · Cited by 16
Cationic copolymerization of L,L-lactide with hydroxyl substituted cyclic ethers
Basko, M., Bednarek, M., & Kubisa, P. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3464 · Cited by 14
Marszałek-Harych, A., Jędrzkiewicz, D., & Ejfler, J. (2017) · Cellular & Molecular Biology Letters · doi:10.1186/s11658-017-0061-1 · Cited by 14
Wang, T., Ding, J., Li, J., Liu, Y., & Hao, J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40776 · Cited by 13
Thermo‐Responsive Hydrogels Based on Branched Poly(L‐lactide)‐poly(ethylene glycol) Copolymers
Velthoen, I. W., Tijsma, E. J., Dijkstra, P. J., & Feijen, J. (2008) · Macromolecular Symposia · doi:10.1002/masy.200851202 · Cited by 13
10. Synthesis and synthetic mechanism of Polylactic acid
Montané, X., Montornés, J. M., Nogalska, A., Olkiewicz, M., Giamberini, M., Garcia‐Valls, R., Badia-Fabregat, M., Jubany, I., & Tylkowski, B. (2020) · De Gruyter eBooks · doi:10.1515/9783110656367-010 · Cited by 12
Ni, C., Lu, R., Tao, L., Shi, G., Li, X., & Qin, C. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1353-0 · Cited by 11
Sherazi, T. A. (2014) · Springer eBooks · doi:10.1007/978-3-642-40872-4_274-2 · Cited by 7
Zaborski, M. (2017) · PRZEMYSŁ CHEMICZNY · doi:10.15199/62.2017.1.18 · Cited by 3
Tasaka (2001) · doi:10.1002/1521-3927(20010701)22:11<820::aid-marc820>3.0.co;2-7
Research works printed but not linked: 5
- Szaraniec B. Stodolak-Zych E. Morawska-Chochół A. Eco-composites based on polylactide and natural fibers Przetwórstwo Tworzyw 2011 6 534 538
- Żenkiewicz M. Richert J. Synthesis, properties and applications of polylactide Przetwórstwo Tworzyw 2009 15 192 199
- Hartmann M.H. Kaplan D. Biopolymers from Renewable Resources Springer Berlin/Heidelberg, Germany 1998 978-3-662-03680-8
- Irska I. Piesowicz E. Rosłaniec Z. Biodegradable PLA-based thermoplastic elastomers Elastomery 2016 20 17 25
- Duda A. Poylactide: A polymer of the XXIst century Przem. Chem. 2003 82 905 907
Cited by
Vlachopoulos, A., Karlioti, G., Balla, E., Daniilidis, V., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Christodoulou, E., Koumentakou, I., Karavas, E., et al. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020359 · Cited by 277
Kuperkar, K., Atanase, L., Bahadur, A., Crivei, I., & Bahadur, P. (2024) · Polymers · doi:10.3390/polym16020206 · Cited by 240
“These core–shell aggregates from amphiphilic polymers are excellent for solubilization of hydrophobic drugs [85–87].”
BackgroundTailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
Synthesis, properties, and applications of polylactic acid‐based polymers
Ramezani Dana, H., & Ebrahimi, F. (2023) · Polymer Engineering & Science · doi:10.1002/pen.26193 · Cited by 217
Ntrivala, M. A., Pitsavas, A. C., Lazaridou, K., Baziakou, Z., Karavasili, D., Papadimitriou, M., Ntagkopoulou, C., Balla, E., & Bikiaris, D. N. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114033 · Cited by 178
Metadata
- Authors
- Stefaniak, K., & Masek, A.
- Affiliations
- Lodz University of Technology (PL)
- Corresponding author
- Masek, Anna
- ORCID
- Masek, Anna
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-09-13
- Volume
- 14
- Issue
- 18
- Pages
- 5254
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC8469957
- OpenAlex
- W3199095581
- Cited by
- 109
- References
- 103
- Citations by year
- 2026: 13 · 2025: 16 · 2024: 32 · 2023: 27 · 2022: 20 · 2021: 1
- FWCI
- 1.38
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, other-oa)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- polylactic acid, biodegradable polymers, ring-opening polymerization, stannous octoate catalyst, direct polycondensation, star polymers, branched polymers, graft copolymers, block copolymers, biomedical applications, packaging materials, renewable resources
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.