The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Native Cellulose: Structure, Characterization and Thermal Properties
Open accessAbstract
In this work, the relationship between cellulose crystallinity, the influence of extractive content on lignocellulosic fiber degradation, the correlation between chemical composition and the physical properties of ten types of natural fibers were investigated by FTIR spectroscopy, X-ray diffraction and thermogravimetry techniques. The results showed that higher extractive contents associated with lower crystallinity and lower cellulose crystallite size can accelerate the degradation process and reduce the thermal stability of the lignocellulosic fibers studied. On the other hand, the thermal decomposition of natural fibers is shifted to higher temperatures with increasing the cellulose crystallinity and crystallite size. These results indicated that the cellulose crystallite size affects the thermal degradation temperature of natural fibers. This study showed that through the methods used, previous information about the structure and properties of lignocellulosic fibers can be obtained before use in composite formulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 2×
“Table 1 shows the composition of the fibers used in this study based on the literature [11–14].”
MethodBiocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 3×
“Hemicellulose has a random amorphous structure, and it is easily hydrolyzed [37,38].”
BackgroundModeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Oh, S. Y., Yoo, D. I., Shin, Y., Kim, H. C., Kim, H. Y., Chung, Y. S., Park, W. H., & Youk, J. H. (2005) · Carbohydrate Research · doi:10.1016/j.carres.2005.08.007 · Cited by 1,389
Yang, H., Yan, R., Chen, H., Zheng, C., Lee, D. H., & Liang, D. T. (2006) · Energy & Fuels · doi:10.1021/ef0580117 · Cited by 1,171
FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide
Oh, S. Y., Yoo, D. I., Shin, Y., & Seo, G. (2005) · Carbohydrate Research · doi:10.1016/j.carres.2004.11.027 · Cited by 1,023
Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.012 · Cited by 887
Nelson, M. L., & O'Connor, R. T. (1964) · Journal of Applied Polymer Science · doi:10.1002/app.1964.070080322 · Cited by 719
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Wang, W., Lemaire, R., Bensakhria, A., & Luart, D. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105479 · Cited by 429
Moradi, M., Tajik, H., Almasi, H., Forough, M., & Ezati, P. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115030 · Cited by 424
Cellulosic ethanol production: Progress, challenges and strategies for solutions
Liu, C.-G., Xiao, Y., Xia, X.-X., Zhao, X.-Q., Peng, L., Srinophakun, P., & Bai, F.-W. (2019) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.03.002 · Cited by 418
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Rongpipi, S., Ye, D., Gomez, E. D., & Gomez, E. W. (2019) · Frontiers in Plant Science · doi:10.3389/fpls.2018.01894 · Cited by 343
Isolation and Characterization of Cellulose from Different Fruit and Vegetable Pomaces
Szymańska-Chargot, M., Chylińska, M., Gdula, K., Kozioł, A., & Zdunek, A. (2017) · Polymers · doi:10.3390/polym9100495 · Cited by 295
Transparent and antimicrobial cellulose film from ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Pratama, A. B., Fajri, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105266 · Cited by 290
Ilyas, R., Aisyah, H., Nordin, A., Ngadi, N., Zuhri, M., Asyraf, M., Sapuan, S., Zainudin, E., Sharma, S., Abral, H., et al. (2022) · Polymers · doi:10.3390/polym14050874 · Cited by 258
Hayes, D. G., Wadsworth, L. C., Sintim, H. Y., Flury, M., English, M., Schaeffer, S., & Saxton, A. M. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.07.027 · Cited by 136
Preparation of hemp nanocellulose and its use to improve the properties of paper for food packaging
Barbash, V. A., Yashchenko, O. V., Yakymenko, O. S., Zakharko, R. M., & Myshak, V. D. (2022) · Cellulose · doi:10.1007/s10570-022-04773-6 · Cited by 45
Makhado, E., Seleka, W. M., Mahlaule Glory, L., Selowa, K., Abu Elella, M. H., Botlhoko, O. J., Satekge, T. K., & Hato, M. J. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147842 · Cited by 22
Metadata
- Authors
- Poletto, M., Ornaghi, H., & Zattera, A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2014-08-25
- Volume
- 7
- Issue
- 9
- Pages
- 6105-6119
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2134314583
- Cited by
- 1,038
- References
- 36
- FWCI
- 26.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.