The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Potential of Electrospun Nanofibers for Biomedical and Dental Applications
Open accessAbstract
Electrospinning is a versatile technique that has gained popularity for various biomedical applications in recent years. Electrospinning is being used for fabricating nanofibers for various biomedical and dental applications such as tooth regeneration, wound healing and prevention of dental caries. Electrospun materials have the benefits of unique properties for instance, high surface area to volume ratio, enhanced cellular interactions, protein absorption to facilitate binding sites for cell receptors. Extensive research has been conducted to explore the potential of electrospun nanofibers for repair and regeneration of various dental and oral tissues including dental pulp, dentin, periodontal tissues, oral mucosa and skeletal tissues. However, there are a few limitations of electrospinning hindering the progress of these materials to practical or clinical applications. In terms of biomaterials aspects, the better understanding of controlled fabrication, properties and functioning of electrospun materials is required to overcome the limitations. More in vivo studies are definitely required to evaluate the biocompatibility of electrospun scaffolds. Furthermore, mechanical properties of such scaffolds should be enhanced so that they resist mechanical stresses during tissue regeneration applications. The objective of this article is to review the current progress of electrospun nanofibers for biomedical and dental applications. In addition, various aspects of electrospun materials in relation to potential dental applications have been discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
Electrospinning for tissue engineering scaffolds
Lannutti, J., Reneker, D., Ma, T., Tomasko, D., & Farson, D. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.019 · Cited by 693
Keun Kwon, I., Kidoaki, S., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.007 · Cited by 607
Electrospun nanostructured scaffolds for bone tissue engineering
Prabhakaran, M. P., Venugopal, J., & Ramakrishna, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.007 · Cited by 430
Fluorescent PLLA-nanodiamond composites for bone tissue engineering
Zhang, Q., Mochalin, V. N., Neitzel, I., Knoke, I. Y., Han, J., Klug, C. A., Zhou, J. G., Lelkes, P. I., & Gogotsi, Y. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.090 · Cited by 399
Cited by
Covid-19 face masks: A potential source of microplastic fibers in the environment
Fadare, O. O., & Okoffo, E. D. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.140279 · Cited by 906
Electrospinning for tissue engineering applications
Rahmati, M., Mills, D. K., Urbanska, A. M., Saeb, M. R., Venugopal, J. R., Ramakrishna, S., & Mozafari, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100721 · Cited by 816
Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication
Jun, I., Han, H.-S., Edwards, J., & Jeon, H. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19030745 · Cited by 467
Electrospun Polymer Nanofibers: Processing, Properties, and Applications
Al-Abduljabbar, A., & Farooq, I. (2022) · Polymers · doi:10.3390/polym15010065 · Cited by 397
Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine
Qasim, S., Zafar, M., Najeeb, S., Khurshid, Z., Shah, A., Husain, S., & Rehman, I. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19020407 · Cited by 327
Self-citation
Metadata
- Authors
- Zafar, M., Najeeb, S., Khurshid, Z., Vazirzadeh, M., Zohaib, S., Najeeb, B., & Sefat, F.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2016-01-26
- Volume
- 9
- Issue
- 2
- Pages
- 73
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2258689661
- Cited by
- 228
- References
- 5
- FWCI
- 8.52
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Potential of Electrospun Nanofibers for Biomedical and Dental Applications. https://app.cochat.ai/papers/10.3390/ma9020073
- The paper
- Zafar, M., Najeeb, S., Khurshid, Z., Vazirzadeh, M., Zohaib, S., Najeeb, B., & Sefat, F. (2016). Potential of Electrospun Nanofibers for Biomedical and Dental Applications. Materials. https://doi.org/10.3390/ma9020073
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.