CoChat

Volcanic and Saline Lithium Inputs to the Salar de Atacama

Open access
Godfrey, Linda, Álvarez-Amado, Fernanda · 2020 · Minerals
Cited by 50

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

Abstract

The Li-rich brine contained within the halite body of the Salar de Atacama is uncommon for two reasons: First, it has an exceptionally high Li concentration, even compared to other closed basins in the Li triangle of South America; and second, it is widespread within the halite nucleus and not restricted to a localized area. This study focusses on the southern half of the salar where Li production occurs and draws comparisons with its northern neighboring basin through which the Loa river flows. Concentration and isotope data for water inflowing to this part of the salar were obtained from surface inflow as well as wells located within the alluvial fans on its eastern margin. Lithium varies between 0.2 and 20 mg/L before reaching the salar where small amounts of the brine and or salts that precipitated from it can increase its concentration up to 400 mg/L or higher. The δ7Li of the inflow water varies between +4.9‰ and +11.2‰ and increases to +12.6‰ within the salar margin, consistent with salar brine based on reported measurements. Boron isotopes indicate that it is unlikely that solutes are derived from sedimentary evaporites or mineral cements, unlike the situation in the adjacent Loa basin. Water that flows through an aquifer laterally confined by a basement block and a line of volcanoes has a notably higher δ7Li than other inflow water, around +9‰, and increasing to +10.5‰. δ7Li values are overall higher than were measured in the adjacent Loa basin, indicating that here the water–rock reactions for Li are more evolved due to longer residence times. Lithium concentrations increased with sodium and chloride, but sedimentary evaporites are shown to be unimportant from δ11B. This is accounted for two ways: evaporated saline inflow leaks from higher elevation basins and inflows are partly derived from or modified by active volcanic systems. Active and dormant volcanoes plus the massive Altiplano–Puna magmatic body are important as heat sources, which enhance water–rock reactions. The large topographic difference between the mean elevation of Altiplano on which these volcanoes sit and the salar surface allows hydrothermal fluids, which would otherwise stay deep below the surface under the modern arc, to uplift at the salar.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/min10020201

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 50

Metadata

Authors
Godfrey, L., & Álvarez-Amado, F.
Venue
Minerals
Publisher
MDPI AG
Published
2020-02-24
Volume
10
Issue
2
Pages
201
ISSN
2075-163X (ISSN-L)
OpenAlex
W3008832509
Cited by
50
References
13
FWCI
3.95
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.