The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
Open accessAbstract
Three-dimensional printing, also known as additive manufacturing, is a fabrication process whereby a 3D object is created layer-by-layer by depositing a feedstock material such as thermoplastic polymer. The 3D printing technology has been widely used for rapid prototyping and its interest as a fabrication method has grown significantly across many disciplines. The most common 3D printing technology is called the Fused Deposition Modelling (FDM) which utilises thermoplastic filaments as a starting material, then extrudes the material in sequential layers above its melting temperature to create a 3D object. These filaments can be fabricated using the Hot-Melt Extrusion (HME) technology. The advantage of using HME to manufacture polymer filaments for FDM printing is that a homogenous solid dispersion of two or more pharmaceutical excipients i.e., polymers can be made and a thermostable drug can even be introduced in the filament composition, which is otherwise impractical with any other techniques. By introducing HME techniques for 3D printing filament development can improve the bioavailability and solubility of drugs as well as sustain the drug release for a prolonged period of time. The latter is of particular interest when medical implants are considered via 3D printing. In recent years, there has been increasing interest in implementing a continuous manufacturing method on pharmaceutical products development and manufacture, in order to ensure high quality and efficacy with less batch-to-batch variations of the pharmaceutical products. The HME and FDM technology can be combined into one integrated continuous processing platform. This article reviews the working principle of Hot Melt Extrusion and Fused Deposition Modelling, and how these two technologies can be combined for the use of advanced pharmaceutical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Pharmaceutical Applications of Hot-Melt Extrusion: Part I
Crowley, M. M., Zhang, F., Repka, M. A., Thumma, S., Upadhye, S. B., Kumar Battu, S., McGinity, J. W., & Martin, C. (2007) · Drug Development and Industrial Pharmacy · doi:10.1080/03639040701498759 · Cited by 824
Melt extrusion: from process to drug delivery technology
Breitenbach, J. (2002) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(02)00061-9 · Cited by 742
A Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Patil, H., Tiwari, R. V., & Repka, M. A. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-015-0360-7 · Cited by 584
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
Additive manufacturing for the food industry
Lipton, J. I., Cutler, M., Nigl, F., Cohen, D., & Lipson, H. (2015) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2015.02.004 · Cited by 459
Melocchi, A., Parietti, F., Maroni, A., Foppoli, A., Gazzaniga, A., & Zema, L. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.05.036 · Cited by 409
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Zhang, J., Feng, X., Patil, H., Tiwari, R. V., & Repka, M. A. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.049 · Cited by 393
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Sadia, M., Arafat, B., Ahmed, W., Forbes, R. T., & Alhnan, M. A. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.11.022 · Cited by 368
Goyanes, A., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 355
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Goyanes, A., Chang, H., Sedough, D., Hatton, G. B., Wang, J., Buanz, A., Gaisford, S., & Basit, A. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.039 · Cited by 330
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication
Murr, L. E. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.08.011 · Cited by 329
Sadia, M., Sośnicka, A., Arafat, B., Isreb, A., Ahmed, W., Kelarakis, A., & Alhnan, M. A. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.09.050 · Cited by 323
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Kollamaram, G., Croker, D. M., Walker, G. M., Goyanes, A., Basit, A. W., & Gaisford, S. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.04.055 · Cited by 318
A Review of Hot-Melt Extrusion: Process Technology to Pharmaceutical Products
Maniruzzaman, M., Boateng, J. S., Snowden, M. J., & Douroumis, D. (2012) · ISRN Pharmaceutics · doi:10.5402/2012/436763 · Cited by 308
Self-citationImprovement in solubility of poor water-soluble drugs by solid dispersion
Sareen, S., Joseph, L., & Mathew, G. (2012) · International Journal of Pharmaceutical Investigation · doi:10.4103/2230-973x.96921 · Cited by 306
Bio-functional components in the processed pre-germinated brown rice by a twin-screw extruder
Ohtsubo, K., Suzuki, K., Yasui, Y., & Kasumi, T. (2005) · Journal of Food Composition and Analysis · doi:10.1016/j.jfca.2004.10.003 · Cited by 303
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Okwuosa, T. C., Stefaniak, D., Arafat, B., Isreb, A., Wan, K.-W., & Alhnan, M. A. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1995-0 · Cited by 294
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Genina, N., Holländer, J., Jukarainen, H., Mäkilä, E. M., Salonen, J., & Sandler, N. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2015.11.005 · Cited by 285
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
Solanki, N. G., Tahsin, M., Shah, A. V., & Serajuddin, A. T. M. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.10.021 · Cited by 272
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
Maroni, A., Melocchi, A., Parietti, F., Foppoli, A., Zema, L., & Gazzaniga, A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.10.008 · Cited by 268
Holländer, J., Genina, N., Jukarainen, H., Khajeheian, M., Rosling, A., Mäkilä, E., & Sandler, N. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.12.012 · Cited by 252
Beck, R. C. R., Chaves, P. S., Goyanes, A., Vukosavljevic, B., Buanz, A., Windbergs, M., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.074 · Cited by 249
3D printed orodispersible films with Aripiprazole
Jamróz, W., Kurek, M., Łyszczarz, E., Szafraniec, J., Knapik-Kowalczuk, J., Syrek, K., Paluch, M., & Jachowicz, R. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.052 · Cited by 233
Applications of hot-melt extrusion for drug delivery
Repka, M. A., Majumdar, S., Kumar Battu, S., Srirangam, R., & Upadhye, S. B. (2008) · Expert Opinion on Drug Delivery · doi:10.1517/17425240802583421 · Cited by 227
Melt extrusion with poorly soluble drugs – An integrated review
Repka, M. A., Bandari, S., Kallakunta, V. R., Vo, A. Q., McFall, H., Pimparade, M. B., & Bhagurkar, A. M. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.10.056 · Cited by 224
3D printing of vaginal rings with personalized shapes for controlled release of progesterone
Fu, J., Yu, X., & Jin, Y. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.036 · Cited by 222
Clinical efficacy and effectiveness of 3D printing: a systematic review
Diment, L. E., Thompson, M. S., & Bergmann, J. H. M. (2017) · BMJ Open · doi:10.1136/bmjopen-2017-016891 · Cited by 220
3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
Verstraete, G., Samaro, A., Grymonpré, W., Vanhoorne, V., Van Snick, B., Boone, M. N., Hellemans, T., Van Hoorebeke, L., Remon, J. P., & Vervaet, C. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.002 · Cited by 209
Zhang, J., Yang, W., Vo, A. Q., Feng, X., Ye, X., Kim, D. W., & Repka, M. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.058 · Cited by 208
Gioumouxouzis, C. I., Baklavaridis, A., Katsamenis, O. L., Markopoulou, C. K., Bouropoulos, N., Tzetzis, D., & Fatouros, D. G. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.04.020 · Cited by 201
Kempin, W., Franz, C., Koster, L.-C., Schneider, F., Bogdahn, M., Weitschies, W., & Seidlitz, A. (2017) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.02.014 · Cited by 180
Kempin, W., Domsta, V., Grathoff, G., Brecht, I., Semmling, B., Tillmann, S., Weitschies, W., & Seidlitz, A. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2405-6 · Cited by 172
Okwuosa, T. C., Soares, C., Gollwitzer, V., Habashy, R., Timmins, P., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.03.010 · Cited by 139
Li, Q., Wen, H., Jia, D., Guan, X., Pan, H., Yue, Y., Yu, S., Zhu, Z., Xiang, R., & Pan, W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.03.066 · Cited by 135
Development and evaluation of sustained release mini-matrices prepared via hot melt extrusion
Brabander, C. D., Vervaet, C., & Remon, J. P. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(03)00075-0 · Cited by 117
Compounding of Thermoplastic Starch with Twin‐screw Extruders
Wiedmann, W., & Strobel, E. (1991) · Starch - Stärke · doi:10.1002/star.19910430404 · Cited by 111
Bruce, L. D., Shah, N. H., Malick, A. W., Infeld, M. H., & McGinity, J. W. (2004) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2004.06.007 · Cited by 108
Tagami, T., Nagata, N., Hayashi, N., Ogawa, E., Fukushige, K., Sakai, N., & Ozeki, T. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.057 · Cited by 108
Arafat, B. T., Qinna, N. A., Cieszynska, M., Forbes, R. T., & Alhnan, M. A. (2018) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.04.010 · Cited by 105
Uses of polypills for cardiovascular disease and evidence to date
Huffman, M. D., Xavier, D., & Perel, P. (2017) · The Lancet · doi:10.1016/s0140-6736(17)30553-6 · Cited by 103
Pharmaceutical 3D printing: Design and qualification of a single step print and fill capsule
Smith, D. M., Kapoor, Y., Klinzing, G. R., & Procopio, A. T. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.056 · Cited by 97
Putting polypills into practice: challenges and lessons learned
Webster, R. J., Castellano, J. M., & Onuma, O. K. (2017) · The Lancet · doi:10.1016/s0140-6736(17)30558-5 · Cited by 96
Experimental Analysis of High Temperature PEEK Materials on 3D Printing Test
Sun, X., Liangcheng, C., Ma, H., Peng, G., Bai, Z., & Li, C. (2017) · International Conference on Measuring Technology and Mechatronics Automation (ICMTMA) · doi:10.1109/icmtma.2017.0012 · Cited by 92
3D printing community and emerging practices of peer production
Moilanen, J., & Vadén, T. (2013) · First Monday · doi:10.5210/fm.v18i8.4271 · Cited by 79
Three dimensional printing: A review on the utility within medicine and otolaryngology
Kaye, R. J., Goldstein, T. A., Zeltsman, D., Grande, D. A., & Smith, L. P. (2016) · International Journal of Pediatric Otorhinolaryngology · doi:10.1016/j.ijporl.2016.08.007 · Cited by 76
Clark, M. R., Johnson, T. J., McCabe, R. T., Clark, J. T., Tuitupou, A. L., Elgendy, H. M., Friend, D. R., & Kiser, P. F. (2011) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22781 · Cited by 73
Development of sustained-release lipophilic calcium stearate pellets via hot melt extrusion
Roblegg, E., Jäger, E., Hodžić, A., Koscher, G., Mohr, S., Zimmer, A., & Khinast, J. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.07.004 · Cited by 72
Applications of various analytical techniques in quality control of pharmaceutical excipients
Kumar, M., Bhatia, R., & Rawal, R. K. (2018) · Journal of Pharmaceutical and Biomedical Analysis · doi:10.1016/j.jpba.2018.05.023 · Cited by 55
Introduction to 3D printing in medicine
Roopavath, U. K., & Kalaskar, D. M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100717-4.00001-6 · Cited by 47
Barrios, V., Kaskens, L., Castellano, J. M., Cosín-Sales, J., Ruiz, J. E., Zsolt, I., Fuster, V., & Gracia, A. (2016) · Revista Española de Cardiología (English Edition) · doi:10.1016/j.rec.2016.05.009 · Cited by 44
Barrios, V., Kaskens, L., Castellano, J. M., Cosín-Sales, J., Ruiz, J. E., Zsolt, I., Fuster, V., & Gracia, A. (2016) · Revista Española de Cardiología · doi:10.1016/j.recesp.2016.05.011 · Cited by 41
Twin-screw extrusion of sustained-release oral dosage forms and medical implants
Feng, X., & Zhang, F. (2017) · Drug Delivery and Translational Research · doi:10.1007/s13346-017-0461-9 · Cited by 21
Cited by
Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Bhujbal, S. V., Mitra, B., Jain, U., Gong, Y., Agrawal, A., Karki, S., Taylor, L. S., Kumar, S., & (Tony) Zhou, Q. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.05.014 · Cited by 556
Oral delivery of therapeutic peptides and proteins: Technology landscape of lipid-based nanocarriers
Haddadzadegan, S., Dorkoosh, F., & Bernkop-Schnürch, A. (2022) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.114097 · Cited by 424
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356
Szymczyk-Ziółkowska, P., Łabowska, M. B., Detyna, J., Michalak, I., & Gruber, P. (2020) · Biocybernetics and Biomedical Engineering · doi:10.1016/j.bbe.2020.01.015 · Cited by 266
Metadata
- Authors
- Tan, D. K., Maniruzzaman, M., & Nokhodchi, A.
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2018-10-24
- Volume
- 10
- Issue
- 4
- Pages
- 203
- ISSN
- 1999-4923 (ISSN-L)
- OpenAlex
- W2898464641
- Cited by
- 329
- References
- 66
- FWCI
- 15.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.