CoChat

Utilization of Slaughterhouse Waste in Value-Added Applications: Recent Advances in the Development of Wood Adhesives

Open access

The DOI matches its Crossref record; 83 of the 84 references it cites were found in a registry or an index.

Abstract

Globally, slaughterhouses generate large volumes of animal byproducts. While these byproducts are an important resource of industrial protein that could potentially be utilized in various value-added applications, they are currently either underutilized in high-value applications or being used for production of relatively low-value products such as animal feed and pet food. Furthermore, some of the byproducts of animal slaughtering cannot enter food and feed chains and thus their disposal possesses a serious environmental concern. An innovative utilization of the proteinaceous waste generated by slaughterhouses comprises of waste processing to extract proteins, which are then incorporated into industrial processes to produce value-added bio-based products. In this report, we review the current processes for extraction of protein from proteinaceous waste of slaughterhouses, and utilization of the recovered protein in the development of protein-based wood adhesives.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/polym10020176

Cites

83 of 83 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Process flow chart for recovery of protein and/or hydrolyzed protein fragments from slaughterhouse waste.
Figure 1 Process flow chart for recovery of protein and/or hydrolyzed protein fragments from slaughterhouse waste.CC BY · PubMed Central
Figure 2 SEC-HPLC of: (a) thermal hydrolyzed SRM in 33.33%, 50.00%, 66.67% and 83.33% water, relative to the total mass; and (b) alkaline hydrolyzed SRM in 37.50%, 50.00%, 66.67% and 83.33% alkaline solution (15%, w/v, NaOH), relative to the total mass. Figure adopted with copyright permission from Elsevier (for Mekonnen et al., 2013).
Figure 2 SEC-HPLC of: (a) thermal hydrolyzed SRM in 33.33%, 50.00%, 66.67% and 83.33% water, relative to the total mass; and (b) alkaline hydrolyzed SRM in 37.50%, 50.00%, 66.67% and 83.33% alkaline solution (15%, w/v, NaOH), relative to the total mass. Figure adopted with copyright permission from Elsevier (for Mekonnen et al., 2013).CC BY · PubMed Central
Figure 3 Effect of: urea concentration (A); and SDS amount (B) on the adhesive strength of modified spent hen protein. Curing conditions: time = 4 min; temperature = 110 °C; pressure = 3.5 MPa. Figure adopted with copyright permission from Elsevier (for Wang and Wu, 2012).
Figure 3 Effect of: urea concentration (A); and SDS amount (B) on the adhesive strength of modified spent hen protein. Curing conditions: time = 4 min; temperature = 110 °C; pressure = 3.5 MPa. Figure adopted with copyright permission from Elsevier (for Wang and Wu, 2012).CC BY · PubMed Central
Figure 4 Percentage thickness swell of OSB panels and weight loss of adhesive as a function of the percentage of hydrolyzed SRM in the adhesive formulation. The bar graph shows the thickness swell of OSB panels using hydrolyzed protein adhesives cured with 4,4-diphenylmethane diisocyanate. The scattered line chart shows the weight loss of the cured adhesive in water as the hydrolyzed protein concentration was varied from 0% to 85%. Figure adopted with copyright permission from Wiley-VCH (for Mekonnen et al., 2014).
Figure 4 Percentage thickness swell of OSB panels and weight loss of adhesive as a function of the percentage of hydrolyzed SRM in the adhesive formulation. The bar graph shows the thickness swell of OSB panels using hydrolyzed protein adhesives cured with 4,4-diphenylmethane diisocyanate. The scattered line chart shows the weight loss of the cured adhesive in water as the hydrolyzed protein concentration was varied from 0% to 85%. Figure adopted with copyright permission from Wiley-VCH (for Mekonnen et al., 2014).CC BY · PubMed Central
Figure 5 Effect of the weight ratio of peptides and PAE resin on lap shear strength of plywood specimens bonded with the peptides-PAE adhesive. The components of the adhesive system were reacted for 120 min, and the plywood specimens were hot pressed at 120 °C and 3.5 MPa for five minutes. Error bars are the standard deviation of six plywood specimen measurements. Specimens that delaminated when soaked in water are indicated (DL). Means that do not share a letter are significantly different (Tukey, 95% confidence level). The minimum shear strength requirements as specified by ASTM D4690 are shown: 2.344 MPa for dry shear strength; 1.93 M. Figure adopted with copyright permission from MDPI (for Adhikari et al., 2016).
Figure 5 Effect of the weight ratio of peptides and PAE resin on lap shear strength of plywood specimens bonded with the peptides-PAE adhesive. The components of the adhesive system were reacted for 120 min, and the plywood specimens were hot pressed at 120 °C and 3.5 MPa for five minutes. Error bars are the standard deviation of six plywood specimen measurements. Specimens that delaminated when soaked in water are indicated (DL). Means that do not share a letter are significantly different (Tukey, 95% confidence level). The minimum shear strength requirements as specified by ASTM D4690 are shown: 2.344 MPa for dry shear strength; 1.93 M. Figure adopted with copyright permission from MDPI (for Adhikari et al., 2016).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 4

  1. Walsh, 2014, The use of Animal By-Products—AHDB Beef & Lamb, EBLEX, 130514, 1
  2. CFIA (2017, September 21). Annex D: Specified Risk Materials, Available online: http://www.inspection.gc.ca/food/meat-and-poultry-products/manual-of-procedures/chapter-17/annex-d/eng/1369768468665/1369768518427.
  3. Epsy, 1995, The Mechanism of Wet Strength Development in Paper: A Review, Tappi J., 78, 90
  4. Pizzi, A., and Mittal, K.L. (2018). Protein Adhesives. Handbook of Adhesive Technology, CRC Press, Taylor and Francis Group. [3rd ed.].

Cited by

See all 132

Metadata

Authors
Adhikari, B., Chae, M., & Bressler, D.
Affiliations
University of Alberta (CA)
Corresponding author
Bressler, David
Venue
Polymers
Publisher
MDPI AG
Published
2018-02-11
Volume
10
Issue
2
Pages
176
ISSN
2073-4360 (ISSN-L)
OpenAlex
W2789723927
Cited by
132
References
84
Citations by year
2026: 6 · 2025: 21 · 2024: 24 · 2023: 23 · 2022: 19 · 2021: 24 · 2020: 9 · 2019: 6
FWCI
1.08
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Alberta Agriculture and Forestry
  • Alberta Livestock and Meat Agency
  • Alberta Innovates Bio Solutions
  • Alberta Innovates
  • Natural Sciences and Engineering Research Council of Canada
Topics
  • Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
  • Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
  • Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
Keywords
slaughterhouse waste, protein extraction, waste valorization, protein recovery, wood adhesives

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.