Preparation of Polypropylene Micro and Nanofibers by Electrostatic-Assisted Melt Blown and Their Application
Open accessThe DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
In this paper, a novel electrostatic-assisted melt blown process was reported to produce polypropylene (PP) microfibers with a diameter as fine as 600 nm. The morphology, web structure, pore size distribution, filtration efficiency, and the stress and strain behavior of the PP nonwoven fabric thus prepared were characterized. By introducing an electrostatic field into the conventional melt-blown apparatus, the average diameter of the melt-blown fibers was reduced from 1.69 to 0.96 μm with the experimental setup, and the distribution of fiber diameters was narrower, which resulted in a filter medium with smaller average pore size and improved filtration efficiency. The polymer microfibers prepared by this electrostatic-assisted melt blown method may be adapted in a continuous melt blown process for the production of filtration media used in air filters, dust masks, and so on.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“In addition to high packing density, filtration efficiency can be dramatically improved by electrostatic charges imparted on the filter fibers. 15”
From Assessment of N95 and K95 respirator decontamination: fiber integrity, filtration efficiency, and dipole charge density (2020) · cites this paper as [15]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Controlling the Fiber Diameter during Electrospinning
Fridrikh, S. V., Yu, J. H., Brenner, M. P., & Rutledge, G. C. (2003) · Physical Review Letters · doi:10.1103/physrevlett.90.144502 · Cited by 941
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Melt blown nanofibers: Fiber diameter distributions and onset of fiber breakup
Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W., & Bates, F. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.005 · Cited by 497
Fabrication of nanofiber meltblown membranes and their filtration properties
Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.050 · Cited by 267
Melt electrospinning of low‐density polyethylene having a low‐melt flow index
Deng, R., Liu, Y., Ding, Y., Xie, P., Luo, L., & Yang, W. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29864 · Cited by 153
Zhang, H., Liu, J., Zhang, X., Huang, C., & Jin, X. (2018) · RSC Advances · doi:10.1039/c7ra10916d · Cited by 151
Meltblown nanofiber media for enhanced quality factor
Uppal, R., Bhat, G. S., Eash, C., & Akato, K. M. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-0660-z · Cited by 135
Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol)
Detta, N., Brown, T. D., Edin, F. K., Albrecht, K., Chiellini, F., Chiellini, E., Dalton, P. D., & Hutmacher, D. W. (2010) · Polymer International · doi:10.1002/pi.2954 · Cited by 116
Li, H., Wu, W., Bubakir, M. M., Chen, H., Zhong, X., Liu, Z., Ding, Y., & Yang, W. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40080 · Cited by 105
Xiao, H., Song, Y., & Chen, G. (2014) · Journal of Electrostatics · doi:10.1016/j.elstat.2014.05.006 · Cited by 103
Research works printed but not linked: 2
- Chen H. He W. Qin Y. Ma X. Li H. Melt electro-blowing spinning for preparation of nanofibers Plastics 2017 46 121 124
- Deng R. Liu Y. Zheng Y. Yang W. Investigation on producing micro-nano fibers by melt electrospinning Mater. Sci. Technol. 2010 18 425 433
Cited by
Items 101–117 of 117
Primc, G. (2026) · Polymers · doi:10.3390/polym18151886 · Cited by 1
Scungio, M., & Parlani, G. (2023) · Atmospheric Environment · doi:10.1016/j.atmosenv.2023.119731 · Cited by 2
Ahne, J. (2019) · UWSpace (University of Waterloo) · Cited by 1
Face Mask: A Novel Material for Protection against Bacteria/Virus
Govindharajan, T., & Subramoniapllai, V. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.98604
Structural transition of polypropylenes during cast film extrusion, heating and confinement
Sacco, F. D. (2023) · University of Groningen research database (University of Groningen / Centre for Information Technology) · doi:10.33612/diss.558429972
Ma, T., An, Y., Wen, Z., Zhang, J., Lian, D., Lu, J., & Wang, H. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70090
Charavanan, V. (2023) · Scholarship at UWindsor (University of Windsor)
Enhancing Drafter Performance in Spunbonding of Polymeric Fibers via Airflow Simulation
Mohajer, B., Kheradmandkeysomi, M., Park, C. B., & Bussmann, M. (2026) · Polymers · doi:10.3390/polym18020187
Wang, Q., Lu, M., Zhou, R., Li, M., Ding, C., & Liang, Y. (2026) · Polymers · doi:10.3390/polym18070857
Impact of Three Single-Step Decontamination Methods on Respirators and Medical Gowns
Dawson, J. N., Hasani, A. R. S., Guha, S., Lucas, A. D., & Schwerin, M. R. (2026) · Biomedical Instrumentation & Technology · doi:10.2345/0899-8205-60.3.79
Quecke, E., Peyravi, A., Kosareva, E., Dolez, P. I., Doroshenko, A., Smith, S., Hashisho, Z., & Quémerais, B. (2026) · Infection Disease & Health · doi:10.1016/j.idh.2026.100454
Alka, Srivastava, S., Prajapati, P., & Sonkar, A. B. (2026) · Frontiers in Materials · doi:10.3389/fmats.2026.1950296
Production and Characterization of Poly Lactic Acid (Pla) Meltblown Nonwovens For Air Filtration
Ertoğrul, E., & Kaya, D. D. (2026) · TEKSTİL VE KONFEKSİYON · doi:10.32710/tekstilvekonfeksiyon.1680999
Metadata
- Authors
- Pu, Y., Zheng, J., Chen, F., Long, Y., Wu, H., Li, Q., Yu, S., Wang, X., & Ning, X.
- Affiliations
- Qingdao University (CN)
- Collaborative Innovation Center for Nanomaterials & Devices, College of Physics, Qingdao University, Qingdao 266071, China
- Corresponding author
- Zheng, Jie
- Ning, Xin
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2018-08-29
- Volume
- 10
- Issue
- 9
- Pages
- 959
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6403903
- OpenAlex
- W2889428526
- Cited by
- 116
- References
- 34
- Citations by year
- 2026: 8 · 2025: 12 · 2024: 17 · 2023: 21 · 2022: 22 · 2021: 17 · 2020: 14 · 2019: 5
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Natural Science Foundation of China (51673103, 11747170)
- Natural Science Foundation of Shandong Province (ZR2018BB043)
- Postdoctoral Scientific Research Foundation of Qingdao (2016014, 2017012)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
- Keywords
- polypropylene, nanofibers, microfibers, nonwoven fabrics, filter media, pore size distribution, filtration efficiency, fiber diameter, air filters, dust masks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.