The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Lignin-Based Polyurethanes: Opportunities for Bio-Based Foams, Elastomers, Coatings and Adhesives
Open accessAbstract
Polyurethane chemistry can yield diverse sets of polymeric materials exhibiting a wide range of properties for various applications and market segments. Utilizing lignin as a polyol presents an opportunity to incorporate a currently underutilized renewable aromatic polymer into these products. In this work, we will review the current state of technology for utilizing lignin as a polyol replacement in different polyurethane products. This will include a discussion of lignin structure, diversity, and modification during chemical pulping and cellulosic biofuels processes, approaches for lignin extraction, recovery, fractionation, and modification/functionalization. We will discuss the potential of incorporation of lignins into polyurethane products that include rigid and flexible foams, adhesives, coatings, and elastomers. Finally, we will discuss challenges in incorporating lignin in polyurethane formulations, potential solutions and approaches that have been taken to resolve those issues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Polyurethane types, synthesis and applications – a review
Akindoyo, J. O., Beg, M. D. H., Ghazali, S., Islam, M. R., Jeyaratnam, N., & Yuvaraj, A. R. (2016) · RSC Advances · doi:10.1039/c6ra14525f · Cited by 1,831
Lignins: Natural polymers from oxidative coupling of 4-hydroxyphenyl- propanoids
Ralph, J., Lundquist, K., Brunow, G., Lu, F., Kim, H., Schatz, P. F., Marita, J. M., Hatfield, R. D., Ralph, S. A., Christensen, J. H., et al. (2004) · Phytochemistry Reviews · doi:10.1023/b:phyt.0000047809.65444.a4 · Cited by 1,660
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Delebecq, E., Pascault, J.-P., Boutevin, B., & Ganachaud, F. (2013) · Chemical Reviews · doi:10.1021/cr300195n · Cited by 1,326
Towards lignin-based functional materials in a sustainable world
Kai, D., Tan, M. J., Chee, P. L., Chua, Y. K., Yap, Y. L., & Loh, X. J. (2016) · Green Chemistry · doi:10.1039/c5gc02616d · Cited by 1,267
Al-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
Handbook of Wood Chemistry and Wood Composites
(2012) · CRC Press eBooks · doi:10.1201/b12487 · Cited by 917
Polyurethane Foams: Past, Present, and Future
Gama, N. V., Ferreira, A., & Barros-Timmons, A. (2018) · Materials · doi:10.3390/ma11101841 · Cited by 902
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721
Szycher's Handbook of Polyurethanes
(2012) · CRC Press eBooks · doi:10.1201/b12343 · Cited by 608
Hydroxycinnamates in lignification
Ralph, J. (2010) · Phytochemistry Reviews · doi:10.1007/s11101-009-9141-9 · Cited by 584
Szycher's handbook of polyurethanes
(1999) · Choice Reviews Online · doi:10.5860/choice.37-1570 · Cited by 556
Gosselink, R. J. A., de Jong, E., Guran, B., & Abächerli, A. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.015 · Cited by 533
Thermal properties of lignin in copolymers, blends, and composites: a review
Sen, S., Patil, S., & Argyropoulos, D. S. (2015) · Green Chemistry · doi:10.1039/c5gc01066g · Cited by 520
Mahmood, N., Yuan, Z., Schmidt, J., & Xu, C. (. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.037 · Cited by 487
Polymer/lignin blends: Interactions, properties, applications
Kun, D., & Pukánszky, B. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.035 · Cited by 417
Development of sustainable bio-adhesives for engineered wood panels – A Review
Hemmilä, V., Adamopoulos, S., Karlsson, O., & Kumar, A. (2017) · RSC Advances · doi:10.1039/c7ra06598a · Cited by 397
Lignin-derivatives based polymers, blends and composites: A review
Naseem, A., Tabasum, S., Zia, K. M., Zuber, M., Ali, M., & Noreen, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.030 · Cited by 343
Lignin: Historical, Biological, and Materials Perspectives
(1999) · ACS Symposium Series · doi:10.1021/bk-2000-0742 · Cited by 329
Chemistry of delignification: Part 1: General concept and reactions during pulping
Gierer, J. (1985) · Wood Science and Technology · doi:10.1007/bf00350807 · Cited by 322
Photodegradation and photostabilisation of wood – the state of the art
George, B., Suttie, E., Merlin, A., & Deglise, X. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.10.018 · Cited by 303
Chemistry of delignification: Part 2: Reactions of lignins during bleaching
Gierer, J. (1986) · Wood Science and Technology · doi:10.1007/bf00350692 · Cited by 285
Green synthesis of flexible polyurethane foams from liquefied lignin
Cinelli, P., Anguillesi, I., & Lazzeri, A. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.04.005 · Cited by 282
Pan, X., & Saddler, J. N. (2013) · Biotechnology for Biofuels · doi:10.1186/1754-6834-6-12 · Cited by 242
Kim, J.-Y., Lee, H. W., Lee, S. M., Jae, J., & Park, Y.-K. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.055 · Cited by 241
Improved Lignin Polyurethane Properties with Lewis Acid Treatment
Chung, H., & Washburn, N. R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300425x · Cited by 236
Kraft Lignin-Based Rigid Polyurethane Foam
Li, Y., & Ragauskas, A. J. (2012) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2011.652795 · Cited by 223
Solubility of Lignin and Acetylated Lignin in Organic Solvents
Sameni, J., Krigstin, S., & Sain, M. (2017) · BioResources · doi:10.15376/biores.12.1.1548-1565 · Cited by 219
Aqueous organic solvent fractionation as means to improve lignin homogeneity and purity
Jääskeläinen, A.-S., Liitiä, T., Mikkelson, A., & Tamminen, T. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.03.039 · Cited by 215
Polyurethanes for coatings and adhesives – chemistry and applications
Golling, F. E., Pires, R., Hecking, A., Weikard, J., Richter, F., Danielmeier, K., & Dijkstra, D. (2019) · Polymer International · doi:10.1002/pi.5665 · Cited by 214
Lignin-Based Rigid Polyurethane Foam Reinforced with Pulp Fiber: Synthesis and Characterization
Xue, B.-L., Wen, J.-L., & Sun, R.-C. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc5001226 · Cited by 211
Cui, C., Sun, R., & Argyropoulos, D. S. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400545d · Cited by 211
Polyurethane Coatings Based on Chemically Unmodified Fractionated Lignin
Griffini, G., Passoni, V., Suriano, R., Levi, M., & Turri, S. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00073 · Cited by 210
Aqueous acetone fractionation of kraft, organosolv and soda lignins
Domínguez-Robles, J., Tamminen, T., Liitiä, T., Peresin, M. S., Rodríguez, A., & Jääskeläinen, A.-S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.102 · Cited by 207
Oxypropylation of Lignins and Preparation of Rigid Polyurethane Foams from the Ensuing Polyols
Nadji, H., Sillard, C., Belgacem, M. N., Benaboura, A., & Gandini, A. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500200 · Cited by 200
Green polyurethane from lignin and soybean oil through non-isocyanate reactions
Lee, A., & Deng, Y. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.023 · Cited by 192
Biodegradation Behavior of Some Vegetable Oil-Based Polymers
Shogren, R. L., Petrovìć, Z. S., Liu, Z., et al. (2004) · Journal of Polymers and the Environment · doi:10.1023/b:jooe.0000038549.73769.7d · Cited by 187
Flexible polyurethane foams green production employing lignin or oxypropylated lignin
Bernardini, J., Cinelli, P., Anguillesi, I., Coltelli, M., & Lazzeri, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.039 · Cited by 185
Polyurethanes: Science, Technology, Markets, and Trends
Sonnenschein, M. F. (2014) · Wiley eBooks · doi:10.1002/9781118901274 · Cited by 185
Production of polyols via direct hydrolysis of kraft lignin: Effect of process parameters
Mahmood, N., Yuan, Z., Schmidt, J., & (Charles) Xu, C. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.03.199 · Cited by 178
Passoni, V., Scarica, C., Levi, M., Turri, S., & Griffini, G. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01722 · Cited by 176
Methanol Fractionation of Softwood Kraft Lignin: Impact on the Lignin Properties
Saito, T., Perkins, J. H., Vautard, F., Meyer, H. M., Messman, J. M., Tolnai, B., & Naskar, A. K. (2014) · ChemSusChem · doi:10.1002/cssc.201300509 · Cited by 175
Kouisni, L., Gagné, A., Maki, K., Holt-Hindle, P., & Paleologou, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00907 · Cited by 172
Laurichesse, S., Huillet, C., & Avérous, L. (2014) · Green Chem. · doi:10.1039/c4gc00596a · Cited by 171
Engineering plastics from lignin. I. Synthesis of hydroxypropyl lignin
Wu, L. C. ‐., & Glasser, W. G. (1984) · Journal of Applied Polymer Science · doi:10.1002/app.1984.070290408 · Cited by 171
Conversion of Lignin into Bio-Based Chemicals and Materials
Xu, C. C., & Ferdosian, F. (2017) · Green chemistry and sustainable technology · doi:10.1007/978-3-662-54959-9 · Cited by 170
Jiang, X., Savithri, D., Du, X., Pawar, S., Jameel, H., Chang, H.-M., & Zhou, X. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02174 · Cited by 166
Fractionation of Organosolv Lignin Using Acetone:Water and Properties of the Obtained Fractions
Sadeghifar, H., Wells, T., Le, R. K., Sadeghifar, F., Yuan, J. S., & Jonas Ragauskas, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01955 · Cited by 163
Biodegradable and Biobased Polymers for Environmental and Biomedical Applications
(2016) · Wiley eBooks · doi:10.1002/9781119117360 · Cited by 161
Meister, J. J. (2002) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-120004764 · Cited by 160
Yuan, T.-Q., He, J., Xu, F., & Sun, R.-C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.03.019 · Cited by 158
Carriço, C. S., Fraga, T., & Pasa, V. M. D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.012 · Cited by 154
Yoshida, H., Mörck, R., Kringstad, K. P., & Hatakeyama, H. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070401102 · Cited by 136
Zhang, H., Bai, Y., Yu, B., Liu, X., & Chen, F. (2017) · Green Chemistry · doi:10.1039/c7gc01974b · Cited by 134
Ethanol organosolv lignin-based rigid polyurethane foam reinforced with cellulose nanowhiskers
Li, Y., & Ragauskas, A. J. (2012) · RSC Advances · doi:10.1039/c2ra00646d · Cited by 133
Gang, H., Lee, D., Choi, K., Kim, H., Ryu, H., Lee, D.-S., & Kim, B. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02960 · Cited by 132
Organosolv extraction of lignin from hydrolyzed almond shells and application of the δ-value theory
Quesada‐Medina, J., López-Cremades, F. J., & Olivares-Carrillo, P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.011 · Cited by 131
Naturally p-Hydroxybenzoylated Lignins in Palms
Lu, F., Karlen, S. D., Regner, M. R., Kim, H., Ralph, S. A., Sun, R.-C., Kuroda, K.-I., Augustin, M. A., MAWSON, R. F., Sabarez, H. T., et al. (2015) · BioEnergy Research · doi:10.1007/s12155-015-9583-4 · Cited by 130
Highly Resilient Lignin-Containing Polyurethane Foam
Wang, S., Liu, W., Yang, D., & Qiu, X. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05072 · Cited by 130
Bio-based polyurethane prepared from Kraft lignin and modified castor oil
Tavares, L. B., Boas, C. R. S. V., Schleder, G. R., Nacas, A. M., Rosa, D. D. S., & dos Santos, D. J. (2016) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2016.86 · Cited by 128
Yang, W., Rallini, M., Wang, D., Gao, D., Dominici, F., Torre, L., Kenny, J. M., & Puglia, D. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.12.030 · Cited by 124
Wang, K., Xu, F., & Sun, R. (2010) · International Journal of Molecular Sciences · doi:10.3390/ijms11082988 · Cited by 117
Sawamura, K., Tobimatsu, Y., Kamitakahara, H., & Takano, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00748 · Cited by 116
Polyurethanes and polyesters from lignin
Bonini, C., D’Auria, M., Emanuele, L., Ferri, R., Pucciariello, R., & Sabia, A. R. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22277 · Cited by 115
Production of Flocculants, Adsorbents, and Dispersants from Lignin
Chen, J., Kazzaz, A. E., Alipoormazandarani, N., Feizi, Z. H., & Fatehi, P. (2018) · Molecules · doi:10.3390/molecules23040868 · Cited by 114
Mahmood, N., Yuan, Z., Schmidt, J. A., Tymchyshyn, M., & Xu, C. C. (2016) · Green Chemistry · doi:10.1039/c5gc02876k · Cited by 113
Properties of flexible polyurethane foams containing isocyanate functionalized kraft lignin
Gómez-Fernández, S., Ugarte, L., Calvo‐Correas, T., Peña-Rodríguez, C., Corcuera, M. Á., & Eceiza, A. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.02.005 · Cited by 112
Non-Wood Fiber as an Alternative to Wood Fiber in Chinas Pulp and Paper Industry
Hammett, A. L. T., Youngs, R. L., Sun, X., & Chandra, M. (2001) · Holzforschung · doi:10.1515/hf.2001.036 · Cited by 101
Lin, X., Zhou, M., Wang, S., et al. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500241g · Cited by 100
Quantitative Phosphorus-31 NMR Analysis of Six Soluble Lignins
Argyropoulos, D. S. (1994) · Journal of Wood Chemistry and Technology · doi:10.1080/02773819408003086 · Cited by 95
Polyurethanes from Alcell® lignin
Thring, R. W., Vanderlaan, M. N., & Griffin, S. L. (1997) · Biomass and Bioenergy · doi:10.1016/s0961-9534(97)00030-5 · Cited by 94
Lignin-based rigid polyurethane foams with improved biodegradation
Cateto, C. A., Barreiro, M. F., Ottati, C., Lopretti, M. I., Rodrigues, A. E., & Belgacem, M. N. (2013) · Journal of Cellular Plastics · doi:10.1177/0021955x13504774 · Cited by 93
Polyurethanes from Alcell® lignin fractions obtained by sequential solvent extraction
Vanderlaan, M. N., & Thring, R. W. (1998) · Biomass and Bioenergy · doi:10.1016/s0961-9534(97)10058-7 · Cited by 89
A comparison of lignin polymer models (DHPs) and lignins by 31P NMR spectroscopy
Saake, B., Argyropoulos, D. S., Beinhoff, O., & Faix, O. (1996) · Phytochemistry · doi:10.1016/0031-9422(96)00283-x · Cited by 84
Solubility and fractionation of Indulin AT kraft lignin in ethanol-water media
Goldmann, W. M., Ahola, J., Mikola, M., & Tanskanen, J. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.06.054 · Cited by 84
Chauhan, M., Gupta, M., Singh, B., Singh, A. K., & Gupta, V. K. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.12.016 · Cited by 80
Synthesis and characterization of polyurethane/microcrystalline cellulose bionanocomposites
Rafiee, Z., & Keshavarz, V. (2015) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2015.05.013 · Cited by 79
Liu, J., Liu, H., Deng, L., Liao, B., & Guo, Q. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39267 · Cited by 78
Polyurethanes based on oxygen-organosolv lignin
Evtuguin, D. V., Andreolety, J. P., & Gandini, A. (1998) · European Polymer Journal · doi:10.1016/s0014-3057(97)00245-0 · Cited by 72
Synthesis of lignin polyols via oxyalkylation with propylene carbonate
Kühnel, I., Podschun, J., Saake, B., & Lehnen, R. (2014) · Holzforschung · doi:10.1515/hf-2014-0068 · Cited by 71
Effects of nitrolignin on mechanical properties of polyurethane–nitrolignin films
Zhang, L., & Huang, J. T. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1206 · Cited by 71
Sadeghifar, H., & Argyropoulos, D. S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00636 · Cited by 69
Lignosulfonate/APP IFR and its flame retardancy in lignosulfonate-based rigid polyurethane foams
Lu, W., Li, Q., Zhang, Y., Yu, H., Hirose, S., Hatakeyama, H., Matsumoto, Y., & Jin, Z. (2018) · Journal of Wood Science · doi:10.1007/s10086-018-1701-4 · Cited by 68
Klein, S. E., Rumpf, J., Kusch, P., Albach, R. W., Rehahn, M., Witzleben, S. T., & Schulze, M. (2018) · RSC Advances · doi:10.1039/c8ra08579j · Cited by 65
Thermal properties of lignin-and molasses-based polyurethane foams
Hatakeyama, H., Kosugi, R., & Hatakeyama, T. (2008) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8963-1 · Cited by 64
Jia, Z., Lü, C., Zhou, P., & Wang, L. (2015) · RSC Advances · doi:10.1039/c5ra09477a · Cited by 62
Use of life cycle assessment to characterize the environmental impacts of polyol production options
Helling, R. K., & Russell, D. A. (2009) · Green Chemistry · doi:10.1039/b815833a · Cited by 60
Kühnel, I., Saake, B., & Lehnen, R. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.03.002 · Cited by 60
The Effect of Plant Source on the Properties of Lignin-Based Polyurethanes
Lang, J., Shrestha, U. M., & Dadmun, M. (2018) · Frontiers in Energy Research · doi:10.3389/fenrg.2018.00004 · Cited by 58
Stoklosa, R. J., Velez, J., Kelkar, S., Saffron, C. M., Thies, M. C., & Hodge, D. B. (2013) · Green Chemistry · doi:10.1039/c3gc41182f · Cited by 57
Self-citationBernardini, J., Anguillesi, I., Coltelli, M., Cinelli, P., & Lazzeri, A. (2015) · Polymer International · doi:10.1002/pi.4905 · Cited by 54
Utilization of Lignosulfonate as Dispersants or Surfactants
Xu, C. C., & Ferdosian, F. (2017) · Green chemistry and sustainable technology · doi:10.1007/978-3-662-54959-9_5 · Cited by 46
A New Environmentally Friendly Approach to Lignin‐Based Cyclic Carbonates
Kühnel, I., Saake, B., & Lehnen, R. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700613 · Cited by 44
Lignin Recovery and Lignin-Based Products
Gellerstedt, G., Tomani, P., Axegård, P., & Backlund, B. (2012) · Royal Society of Chemistry eBooks · doi:10.1039/9781849735063-00180 · Cited by 42
Xue, B., Huang, P.-L., Sun, Y., Li, X., & Sun, R. (2017) · RSC Advances · doi:10.1039/c6ra26318f · Cited by 41
Ong, R. G., Chundawat, S. P. S., Hodge, D. B., Keskar, S. S., & Dale, B. E. (2013) · Springer eBooks · doi:10.1007/978-1-4614-9329-7_14 · Cited by 39
Self-citationCrowe, J. D., Feringa, N., Pattathil, S., Merritt, B. B., Foster, C. E., Dines, D., Ong, R. G., & Hodge, D. B. (2017) · Biotechnology for Biofuels · doi:10.1186/s13068-017-0870-5 · Cited by 38
Self-citationLignosulfonate-based polyurethane materials via cyclic carbonates: preparation and characterization
Mimini, V., Amer, H., Hettegger, H., Bacher, M., Gebauer, I., Bischof, R. H., Fackler, K., Potthast, A., & Rosenau, T. (2019) · Holzforschung · doi:10.1515/hf-2018-0298 · Cited by 33
Xie, J., Qi, J., Hse, C., & Shupe, T. F. (2013) · BioResources · doi:10.15376/biores.9.1.578-588 · Cited by 30
Compressive viscoelastic properties of softwood kraft lignin-based flexible polyurethane foams
Jeong, H., Park, J., Kim, S., Lee, J., & Ahn, N. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-1301-2 · Cited by 29
Cork and Suberins: Major Sources, Properties and Applications
Silvestre, A. J. D., Neto, C. P., & Gandini, A. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00014-4 · Cited by 22
Ge, Y., Dababneh, F., & Li, L. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.037 · Cited by 22
Chang, L.-C., Sain, M. M., & Kortschot, M. T. (2014) · Cellular Polymers · doi:10.1177/026248931403300302 · Cited by 14
Lignin recovery and lignin-based products
Gellerstedt, G., Tomani, P., Axegård, P., & Backlund, B. (2013) · Green Chemistry · Cited by 12
Cited by
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Dessbesell, L., Paleologou, M., Leitch, M., Pulkki, R., & Xu, C. (. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109768 · Cited by 508
The role of lignin and lignin-based materials in sustainable construction – A comprehensive review
Jędrzejczak, P., Collins, M. N., Jesionowski, T., & Klapiszewski, Ł. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.125 · Cited by 339
Lignin Functionalization for the Production of Novel Materials
Bertella, S., & Luterbacher, J. S. (2020) · Trends in Chemistry · doi:10.1016/j.trechm.2020.03.001 · Cited by 326
Metadata
- Authors
- Alinejad, M., Henry, C., Nikafshar, S., Gondaliya, A., Bagheri, S., Chen, N., Singh, S., Hodge, D., & Nejad, M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-07-18
- Volume
- 11
- Issue
- 7
- Pages
- 1202
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2960007311
- Cited by
- 272
- References
- 107
- FWCI
- 10.03
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.