The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Pyrolysis of Polystyrene Waste: A Review
Open accessAbstract
The manufacturing of polystyrene around the globe has escalated in the past years due to its huge applications in various areas. The perpetual market needs of polystyrene led the polystyrene wastes accretion in the landfill causing environmental deterioration. The soaring need for polystyrene also led to the exhaustion of petroleum, a non-renewable energy source, as polystyrene is a petroleum-derived product. Researchers from around the world have discovered a few techniques to take care of the polystyrene scraps, namely recycling and energy recovery techniques. Nevertheless, there are demerits involved with recycling techniques, such as they call for huge labor expenses in the separation process and cause water pollution, thereby decreasing the process sustainability. Owing to these demerits, the researchers have focused their attention on the energy recovery technique. Since petroleum is the main ingredient of polystyrene synthesis, the restoration of liquid oil from polystyrene via the pyrolysis method is a promising technique as the recovered oil has greater calorific value as compared to commercially available fuel. The present paper surveys the pyrolysis technique for polystyrene and the important process parameters that control the end product, like oil, gas, and char. The chief process parameters that are discussed in this review paper include the type of reactors, temperature, residence time, pressure, catalyst types, type of fluidizing gases, and their flow rate. A more recent technique of utilizing a solvent to perform pyrolysis and the effect of various process conditions on the product yield have been discussed. Apart from this, various outlooks to optimize the liquid oil recovery from polystyrene are also reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Elements of chemical reaction engineering
Scott Fogler, H. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80130-6 · Cited by 3,110
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Webb, H., Arnott, J., Crawford, R., & Ivanova, E. (2012) · Polymers · doi:10.3390/polym5010001 · Cited by 958
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Handbook of Fluidization and Fluid-Particle Systems
(2003) · CRC Press eBooks · doi:10.1201/9780203912744 · Cited by 772
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
(2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 482
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479 · cited 1×
“Thus, the search for “cheap catalysts” for pyrolysis is of particular interest from an industrial and economical point of view [40].”
BackgroundCatalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Miandad, R., Rehan, M., Barakat, M. A., Aburiazaiza, A. S., Khan, H., Ismail, I. M. I., Dhavamani, J., Gardy, J., Hassanpour, A., & Nizami, A.-S. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00027 · Cited by 454
Catalytic pyrolysis of polyethylene
Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362
A Review on Waste to Energy Processes Using Microwave Pyrolysis
Lam, S. S., & Chase, H. A. (2012) · Energies · doi:10.3390/en5104209 · Cited by 350
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
Thermal degradation of polymeric materials
(1994) · Additives for Polymers · doi:10.1016/0306-3747(94)90200-3 · Cited by 342
Sakata, Y., Uddin, M. A., & Muto, A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00013-3 · Cited by 305
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012) · Waste Management · doi:10.1016/j.wasman.2011.06.016 · Cited by 275
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264
Microwave-Induced Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 261
Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity
Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250
Liu, Y., Qian, J., & Wang, J. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(99)00066-1 · Cited by 246
Pyrolysis polygeneration of poplar wood: Effect of heating rate and pyrolysis temperature
Chen, D., Li, Y., Cen, K., Luo, M., Li, H., & Lu, B. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.07.049 · Cited by 240
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
FakhrHoseini, S. M., & Dastanian, M. (2013) · Journal of Chemistry · doi:10.1155/2013/487676 · Cited by 239
Melt flow index values and molecular weight distributions of commercial thermoplastics
Bremner, T., Rudin, A., & Cook, D. G. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070410721 · Cited by 232
Oyedun, A. O., Tee, C. Z., Hanson, S., & Hui, C. W. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.08.010 · Cited by 224
Pyrolysis of mixed plastics into aromatics
Kaminsky, W., & Kim, J.-S. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00012-1 · Cited by 219
Miskolczi, N., Bartha, L., & Deák, G. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.056 · Cited by 203
Zhang, H., Nie, J., Xiao, R., Jin, B., Dong, C., & Xiao, G. (2014) · Energy & Fuels · doi:10.1021/ef4019299 · Cited by 194
Review Article: Recycling of Polystyrene
Maharana, T., Negi, Y. S., & Mohanty, B. (2007) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550701273963 · Cited by 192
Lee, K.-H., Noh, N.-S., Shin, D.-H., & Seo, Y. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00227-6 · Cited by 178
Ukei, H., Hirose, T., Horikawa, S., et al. (2000) · Catalysis Today · doi:10.1016/s0920-5861(00)00409-0 · Cited by 175
Kinetics of polystyrene pyrolysis in a conical spouted bed reactor
Aguado, R. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00119-5 · Cited by 171
Marcilly, C. R. (2000) · Topics in Catalysis · doi:10.1023/a:1009007021975 · Cited by 168
Microwave Heating Applied to Pyrolysis
Fernandez, Y., Arenillas, A., & Angel, J. (2011) · Advances in Induction and Microwave Heating of Mineral and Organic Materials · doi:10.5772/13548 · Cited by 163
Effects of temperature and solvent on hydrothermal liquefaction of Sargassum tenerrimum algae
Biswas, B., Kumar, A. A., Bisht, Y., Singh, R., Kumar, J., & Bhaskar, T. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.03.045 · Cited by 163
Mishra, R. K., & Mohanty, K. (2020) · Carbon Resources Conversion · doi:10.1016/j.crcon.2020.11.001 · Cited by 162
Thermal and thermo-catalytic degradation of high-density polyethylene waste
Miskolczi, N., Bartha, L., Deák, G., Jóver, B., & Kalló, D. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.002 · Cited by 161
Tertiary recycling of polypropylene by catalytic cracking in a semibatch stirred reactor
Cardona, S., & Corma, A. (2000) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(99)00127-7 · Cited by 156
Catalytic decomposition of polystyrene. The role of acid and basic active centers
Marczewski, M., Kamińska, E., Marczewska, H., Godek, M., Rokicki, G., & Sokołowski, J. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.09.027 · Cited by 146
Reverse polymerization of waste polystyrene through microwave assisted pyrolysis
Undri, A., Frediani, M., Rosi, L., & Frediani, P. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.001 · Cited by 145
Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation
Vilaplana, F., Ribes-Greus, A., & Karlsson, S. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.01.007 · Cited by 144
Bio-Oil from Hydro-Liquefaction of Bagasse in Supercritical Ethanol
Chumpoo, J., & Prasassarakich, P. (2010) · Energy & Fuels · doi:10.1021/ef901241e · Cited by 143
Pyrolysis characteristics of polystyrene and polypropylene in a stirred batch reactor
Kim, S.-S., & Kim, S. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(03)00184-0 · Cited by 142
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137
Catalytic degradation of polymers: Part III—Degradation of polystyrene
Audisio, G., Bertini, F., Beltrame, P. L., & Carniti, P. (1990) · Polymer Degradation and Stability · doi:10.1016/0141-3910(90)90030-b · Cited by 135
Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems
Shah, J., Jan, M. R., Mabood, F., & Jabeen, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.016 · Cited by 131
Lee, K.-H., & Shin, D.-H. (2006) · Waste Management · doi:10.1016/j.wasman.2005.12.017 · Cited by 130
Liquefaction of major lignocellulosic biomass constituents in supercritical ethanol
Brand, S., & Kim, J. (2015) · Energy · doi:10.1016/j.energy.2014.11.043 · Cited by 124
Catalytic cracking of HDPE over hybrid zeolitic–mesoporous materials
García, R. A., Serrano, D. P., & Otero, D. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.11.002 · Cited by 123
Abnisa, F., Daud, W. M. A. W., & Sahu, J. N. (2013) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11850 · Cited by 109
Thermal Degradation of Polymeric Materials
(2023) · Elsevier eBooks · doi:10.1016/c2019-0-04932-1 · Cited by 107
Thermal conversion of polystyrene plastic waste to liquid fuel via ethanolysis
Ahmad, N., Ahmad, N., Maafa, I. M., Ahmed, U., Akhter, P., Shehzad, N., Amjad, U., & Hussain, M. (2020) · Fuel · doi:10.1016/j.fuel.2020.118498 · Cited by 104
Self-citationJan, M. R., Shah, J., & Gulab, H. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.05.017 · Cited by 101
Flash pyrolysis of polystyrene wastes in a free-fall reactor under vacuum
Karaduman, A., Şimşek, E. H., Çiçek, B., & Bilgesü, A. Y. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00169-8 · Cited by 100
Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts
Adnan, A., Shah, J., & Jan, M. R. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.05.011 · Cited by 97
Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed
Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3018274 · Cited by 94
Catalytic Upgrading of Plastic Wastes
Aguado, J., Serrano, D. P., & Escola, J. M. (2006) · Wiley eBooks · doi:10.1002/0470021543.ch3 · Cited by 89
Utilization of Two Different Types of Plastic Wastes from Daily and Industrial Life
Çepelioğullar, Ö., & Pütün, A. E. (2013) · Cited by 84
Solvent effect on thermal degradation of polystyrene
Sato, S., Murakata, T., Baba, S., et al. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070401120 · Cited by 82
Stability of ZSM-11 and BETA zeolites during the catalytic cracking of low-density polyethylene
Renzini, M. S., Lerici, L., Sedran, U. A., & Pierella, L. B. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.008 · Cited by 80
Saad, J. M., Nahil, M. A., & Williams, P. T. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.027 · Cited by 77
Chauhan, R., Gopinath, S., Razdan, P., Delattre, C., Nirmala, G., & Natarajan, R. (2007) · Waste Management · doi:10.1016/j.wasman.2007.10.001 · Cited by 75
Effective polyelectrolytes synthesised from expanded polystyrene wastes
Bajdur, W., Pajączkowska, J., Makarucha, B., Sułkowska, A., & Sułkowski, W. W. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(01)00191-4 · Cited by 72
Hussain, Z., Khan, K. M., Basheer, N., & Hussain, K. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.10.002 · Cited by 62
Jin, S., Cui, K., Guan, H., Yang, M., Liu, L., & Lan, C. (2011) · Applied Clay Science · doi:10.1016/j.clay.2011.11.012 · Cited by 61
Conversion of waste polystyrene through catalytic degradation into valuable products
Shah, J., Jan, M. R., & Adnan, A. (2014) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-014-0016-4 · Cited by 60
Pyrolysis of polystyrene in a batch-type stirred vessel
Kim, Y. S., Hwang, G. C., Bae, S. Y., Yi, S., Moon, S. K., & Kumazawa, H. (1999) · Korean Journal of Chemical Engineering · doi:10.1007/bf02706830 · Cited by 56
Thermal recycling of polystyrene and polystyrene-butadiene dissolved in a light cycle oil
Arandes, J. M., Ereña, J., Azkoiti, M. J., Olazar, M., & Bilbao, J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(03)00056-1 · Cited by 55
Pyro-GC/MS and thermal degradation studies in polystyrene–poly(vinyl chloride) blends
Ahmad, Z., Al-Sagheer, F. A., & Al‐Awadi, N. A. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.10.010 · Cited by 49
Durak, H. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.04.050 · Cited by 42
MICROWAVE AND CONVENTIONAL PYROLYSIS OF A BITUMINOUS COAL
Gasner, L. L., Denloye, A. O. O., & Regan, T. M. (1986) · Chemical Engineering Communications · doi:10.1080/00986448608910023 · Cited by 41
Catalytic degradation of expandable polystyrene waste (EPSW) over mordenite and modified mordenites
Chumbhale, V. R., Kim, J., Lee, S., & Choi, M. (2004) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2004.07.002 · Cited by 40
Microwave Pyrolysis of Plastic
Khaghanikavkani, E. (2013) · Journal of Chemical Engineering & Process Technology · doi:10.4172/2157-7048.1000150 · Cited by 40
Ungureanu, O. I., Bulgariu, D., Mocanu, A. M., & Bulgariu, L. (2020) · Water · doi:10.3390/w12092624 · Cited by 38
Catalytic degradation of polyethylene over SBA-16
Choi, S. J., Park, Y., Jeong, K., Kim, T., Chae, H., Park, S. H., Jeon, J., & Kim, S.-S. (2010) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-010-0281-9 · Cited by 37
Microwave pyrolysis of polymeric materials
Undri, A., Rosi, L., Frediani, M., et al. (2011) · InTech eBooks · doi:10.5772/24008 · Cited by 36
Degradation of polystyrene in supercritical n-Hexane
Hwang, G.-C., Choi, J.-H., Bae, S., & Kumazawa, H. (2001) · Korean Journal of Chemical Engineering · doi:10.1007/bf02705608 · Cited by 35
Thermal decomposition of polystyrene in supercritical methanol
Shin, H., & Bae, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27960 · Cited by 35
Flash-Pyrolyzed Product Distribution of Major Plastics in a Batch Reactor.
Uemura, Y., AZEURA, M., Ohzuno, Y., et al. (2001) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.34.1293 · Cited by 27
Pyrolysis of polystyrene plastic waste using bentonite catalyst
Dewangga, P. B., Rochmadi, & Purnomo, C. W. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/399/1/012110 · Cited by 25
Liu, H., Li, H.-Y., & Li, M. (2016) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.07.004 · Cited by 24
How to measure the degradation index by viscometry
Shyichuk, A. (1996) · Journal of Applied Polymer Science · Cited by 19
Mohamad, N., Yusof, N. N. M., & Len, K. Y. T. (2017) · Journal of the Japan Institute of Energy · doi:10.3775/jie.96.279 · Cited by 15
Ahmad, N., Abnisa, F., & Daud, W. M. A. W. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.02.004 · Cited by 14
Sarwono, R., Pusfitasari, E. D., & Ghozali, M. (2016) · AIP conference proceedings · doi:10.1063/1.4949322 · Cited by 12
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Plastic Waste Recycling─A Chemical Recycling Perspective
Schade, A., Melzer, M., Zimmermann, S., Schwarz, T., Stoewe, K., & Kuhn, H. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c02551 · Cited by 273
Holistic utilization of waste plastics through a tandem process
Dai, L., Karakas, O., Lata, S., Cobb, K., Lei, H., He, C., Cheng, Y., Chen, P., & Ruan, R. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.110547 · Cited by 12
Metadata
- Authors
- Maafa, I.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-01-11
- Volume
- 13
- Issue
- 2
- Pages
- 225
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3118539598
- Cited by
- 311
- References
- 89
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.