The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Open accessAbstract
Even though natural fiber reinforced polymer composites (NFRPCs) have been widely used in automotive and building industries, there is still a room to promote them to high-level structural applications such as primary structural component specifically for bullet proof and ballistic applications. The promising performance of Kevlar fabrics and aramid had widely implemented in numerous ballistic and bullet proof applications including for bullet proof helmets, vest, and other armor parts provides an acceptable range of protection to soldiers. However, disposal of used Kevlar products would affect the disruption of the ecosystem and pollutes the environment. Replacing the current Kevlar fabric and aramid in the protective equipment with natural fibers with enhanced kinetic energy absorption and dissipation has been significant effort to upgrade the ballistic performance of the composite structure with green and renewable resources. The vast availability, low cost and ease of manufacturing of natural fibers have grasped the attention of researchers around the globe in order to study them in heavy armory equipment and high durable products. The possibility in enhancement of natural fiber’s mechanical properties has led the extension of research studies toward the application of NFRPCs for structural and ballistic applications. Hence, this article established a state-of-the-art review on the influence of utilizing various natural fibers as an alternative material to Kevlar fabric for armor structure system. The article also focuses on the effect of layering and sequencing of natural fiber fabric in the composites to advance the current armor structure system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
The atmospheric-pressure plasma jet: a review and comparison to other plasma sources
Schutze, A., Jeong, J. Y., Babayan, S. E., Park, J., Selwyn, G. S., & Hicks, R. F. (1998) · IEEE Transactions on Plasma Science · doi:10.1109/27.747887 · Cited by 1,401
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00054-7 · Cited by 829
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Natural Fibre Composites and Their Applications: A Review
Peças, P., Carvalho, H., Salman, H., & Leite, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2040066 · Cited by 750
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
A Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 634
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
The water vapor sorption behavior of natural fibers
Hill, C. A. S., Norton, A., & Newman, G. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29725 · Cited by 467
Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration
Lee, J.-H., Loya, P. E., Lou, J., & Thomas, E. L. (2014) · Science · doi:10.1126/science.1258544 · Cited by 442
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citationEffects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites
Gassan, J. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00168-8 · Cited by 355
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
Alsubari, S., Zuhri, M. Y. M., Sapuan, S. M., Ishak, M. R., Ilyas, R. A., & Asyraf, M. R. M. (2021) · Polymers · doi:10.3390/polym13030423 · Cited by 290
Self-citationWielage, B., Lampke, T., Marx, G., Nestler, K., & Starke, D. (1999) · Thermochimica Acta · doi:10.1016/s0040-6031(99)00161-6 · Cited by 284
Comparison of different natural fiber treatments: a literature review
Koohestani, B., Darban, A. K., Mokhtari, P., Yilmaz, E., & Darezereshki, E. (2019) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-018-1890-9 · Cited by 268
Environmental and resource aspects of sustainable biocomposites
Vilaplana, F., Strömberg, E., & Karlsson, S. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.07.016 · Cited by 218
Rowell, R. M., Ibach, R. E., McSweeny, J., & Nilsson, T. (2009) · Wood Material Science and Engineering · doi:10.1080/17480270903261339 · Cited by 212
The response of natural fibre composites to ballistic impact by fragment simulating projectiles
Wambua, P., Vangrimde, B., Lomov, S., & Verpoest, I. (2007) · Composite Structures · doi:10.1016/j.compstruct.2005.07.006 · Cited by 200
Mohit, H., & Arul Mozhi Selvan, V. (2018) · Composite Interfaces · doi:10.1080/09276440.2018.1444832 · Cited by 199
Ilyas, R., Sapuan, S., Atikah, M., Asyraf, M., Rafiqah, S. A., Aisyah, H., Nurazzi, N. M., & Norrrahim, M. (2021) · Textile Research Journal · doi:10.1177/0040517520932393 · Cited by 183
Self-citationIlyas, R. A., Sapuan, S. M., Atiqah, A., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Nurazzi, N. M., Atikah, M. S. N., Ansari, M. N. M., et al. (2020) · Polymer Composites · doi:10.1002/pc.25379 · Cited by 172
Self-citationLow velocity impact performance of recyclable all-polypropylene composites
Alcock, B., Cabrera, N. O., Barkoula, N. ‐., & Peijs, T. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.11.010 · Cited by 154
Asyraf, M. R. M., Rafidah, M., Azrina, A., & Razman, M. R. (2021) · Cellulose · doi:10.1007/s10570-021-03710-3 · Cited by 154
Self-citationRazak, N., Ibrahim, N. A., Zainuddin, N., Rayung, M., & Saad, W. Z. (2014) · Molecules · doi:10.3390/molecules19032957 · Cited by 147
Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric
da Luz, F. S., Júnior, É. P. L., Louro, L. H. L., & Monteiro, S. N. (2015) · Materials Research · doi:10.1590/1516-1439.358914 · Cited by 138
Fique Fabric: A Promising Reinforcement for Polymer Composites
Monteiro, S. N., de Assis, F. S., Ferreira, C., Simonassi, N. T., Weber, R. P., Oliveira, M. S., Colorado, H. A., & Pereira, A. C. (2018) · Polymers · doi:10.3390/polym10030246 · Cited by 136
Modification of Oil Palm Mesocarp Fiber Characteristics Using Superheated Steam Treatment
Nordin, N. I. A. A., Ariffin, H., Andou, Y., Hassan, M. A., Shirai, Y., Nishida, H., Yunus, W. M. Z. W., Karuppuchamy, S., & Ibrahim, N. A. (2013) · Molecules · doi:10.3390/molecules18089132 · Cited by 128
Asyraf, M. R. M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., Rafidah, M., & Razman, M. R. (2020) · International Journal of Polymer Science · doi:10.1155/2020/8878300 · Cited by 124
Self-citationKenned, J. J., Sankaranarayanasamy, K., & Kumar, C. S. (2020) · Polymers and Polymer Composites · doi:10.1177/0967391120942419 · Cited by 121
Asyraf, M. R. M., Rafidah, M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., & Razman, M. R. (2020) · Polymer Composites · doi:10.1002/pc.25587 · Cited by 109
Self-citationGiant Bamboo Fiber Reinforced Epoxy Composite in Multilayered Ballistic Armor
da Cruz, R. B., Júnior, É. P. L., Monteiro, S. N., & Louro, L. H. L. (2015) · Materials Research · doi:10.1590/1516-1439.347514 · Cited by 94
Korol, J., Hejna, A., Burchart-Korol, D., & Wachowicz, J. (2020) · Materials · doi:10.3390/ma13163541 · Cited by 90
Rohen, L. A., Margem, F. M., Monteiro, S. N., Vieira, C. M. F., de Araujo, B. M., & Lima, E. D. S. (2015) · Materials Research · doi:10.1590/1516-1439.346314 · Cited by 83
Graphene Family Nanomaterials: Properties and Potential Applications in Dentistry
Ge, Z., Yang, L., Xiao, F. Y., Wu, Y., Yu, T., Chen, J., Lin, J., & Zhang, Y. (2018) · International Journal of Biomaterials · doi:10.1155/2018/1539678 · Cited by 83
Bahrin, E. K., Baharuddin, A. S., Ibrahim, M. F., Razak, M. N. A., Sulaiman, A., Aziz, S. A., Hassan, M. A., Shirai, Y., & Nishida, H. (2012) · BioResources · doi:10.15376/biores.7.2.1784-1801 · Cited by 79
George, M., Mussone, P. G., Alemaskin, K., Chae, M. S., Wolodko, J., & Bressler, D. C. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9582-z · Cited by 75
Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material
Jambari, S., Yahya, M. Y., Abdullah, M. R., & Jawaid, M. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-6950-0 · Cited by 75
Łyczakowski, J. J., Bourdon, M., Terrett, O. M., Helariutta, Y., Wightman, R., & Dupree, P. (2019) · Frontiers in Plant Science · doi:10.3389/fpls.2019.01398 · Cited by 72
Wang, K., Jiang, J., Xu, F., & Sun, R. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.05.019 · Cited by 69
Moigne, N. L., Sonnier, R., Hage, R. E., & Rouif, S. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.08.027 · Cited by 69
Nanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications
Ilyas, R. A., Sapuan, S. M., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Kadier, A., Kalil, M. S., Atikah, M. S. N., Ibrahim, R., Asrofi, M., Abral, H., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00006-8 · Cited by 67
Self-citationMonteiro, S. N., Pereira, A. C., Ferreira, C., Júnior, É. P. L., Weber, R. P., & de Assis, F. S. (2018) · Polymers · doi:10.3390/polym10030230 · Cited by 56
Monteiro, S. N., Drelich, J. W., Colorado, H. A., Nascimento, L. F. C., da Luz, F. S., da Silva, L. C., dos Santos, J. L., Filho, F. D. C. G., de Assis, F. S., Júnior, É. P. L., et al. (2019) · The minerals, metals & materials series · doi:10.1007/978-3-030-10383-5_4 · Cited by 56
Korol, J., Hejna, A., Burchart-Korol, D., Chmielnicki, B., & Wypiór, K. (2019) · Polymers · doi:10.3390/polym11111791 · Cited by 53
Ilyas, R. A., Sapuan, S. M., Nurazzi, N. M., Norrrahim, M. N. F., Ibrahim, R., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., Izwan, S. M., Azammi, A. M. N., et al. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820559-4.00003-1 · Cited by 49
Self-citationMechanical properties of plasma-treated sisal fibre-reinforced polypropylene composites
Yuan, X., Jayaraman, K., & Bhattacharyya, D. (2004) · Journal of Adhesion Science and Technology · doi:10.1163/1568561041257478 · Cited by 48
Kamarudin, S. H., Abdullah, L. C., Aung, M. M., & Ratnam, C. T. (2020) · Polymers · doi:10.3390/polym12112604 · Cited by 47
Self-citationCuring behaviour of unsaturated polyester resin and interfacial shear stress of sugar palm fibre
Norizan, M. N., Khalina, A., Sapuan, S. M., Laila, A. M. D., & Rahmah, M. (2017) · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · doi:10.15282/jmes.11.2.2017.8.0242 · Cited by 44
Self-citationHaro, E. E., Szpunar, J. A., & Odeshi, A. G. (2018) · Defence Technology · doi:10.1016/j.dt.2018.03.005 · Cited by 42
Nascimento, L. F. C., Louro, L. H. L., Monteiro, S. N., Gomes, A. V., Marçal, R. L. S. B., Júnior, É. P. L., & Margem, J. I. (2017) · Materials Research · doi:10.1590/1980-5373-mr-2016-0927 · Cited by 37
Then, Y. Y., Ibrahim, N. A., Zainuddin, N., Ariffin, H., Yunus, W. M. Z. W., & Chieng, B. W. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150915344 · Cited by 34
Ballistic Performance of Ramie Fabric Reinforcing Graphene Oxide-Incorporated Epoxy Matrix Composite
Pereira, A., Lima, A., Demosthenes, L. C. D. C., Oliveira, M. S., Costa, U. O., Bezerra, W. B. A., Monteiro, S., Rodriguez, R. J. S., de Deus, J. F., & Pinheiro, W. A. (2020) · Polymers · doi:10.3390/polym12112711 · Cited by 32
Zin, M. H., Abdan, K., Norizan, M. N., & Mazlan, N. (2018) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) · Cited by 28
Kamarudin, S. H., Abdullah, L. C., Aung, M. M., & Ratnam, C. T. (2019) · BioResources · doi:10.15376/biores.14.4.9001-9020 · Cited by 21
Self-citationMarzuki, M. N. A., Tawakkal, I. S. M. A., Basri, M. S. M., et al. (2020) · Polymers · doi:10.3390/polym12112622 · Cited by 21
Cho, H., Lee, J., Hong, S.-J., & Kim, S. (2019) · Applied Sciences · doi:10.3390/app10010088 · Cited by 14
Cited by
Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101271 · Cited by 1,034
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Self-citationMohd Nurazzi, N., Asyraf, M. R. M., Khalina, A., Abdullah, N., Sabaruddin, F. A., Kamarudin, S. H., Ahmad, S., Mahat, A. M., Lee, C. L., Aisyah, H. A., et al. (2021) · Polymers · doi:10.3390/polym13071047 · Cited by 478
Self-citationNurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Self-citationSuriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Self-citation
Metadata
- Authors
- Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., & Sapuan, S. M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-02-22
- Volume
- 13
- Issue
- 4
- Pages
- 646
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3131590295
- Cited by
- 398
- References
- 65
- FWCI
- 24.53
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.