The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Synergic Effect of TiO2 Filler on the Mechanical Properties of Polymer Nanocomposites
Open accessAbstract
Nanocomposites with polymer matrix offer excellent opportunities to explore new functionalities beyond those of conventional materials. TiO2, as a reinforcement agent in polymeric nanocomposites, is a viable strategy that significantly enhanced their mechanical properties. The size of the filler plays an essential role in determining the mechanical properties of the nanocomposite. A defining feature of polymer nanocomposites is that the small size of the fillers leads to an increase in the interfacial area compared to traditional composites. The interfacial area generates a significant volume fraction of interfacial polymer, with properties different from the bulk polymer even at low loadings of the nanofiller. This review aims to provide specific guidelines on the correlations between the structures of TiO2 nanocomposites with polymeric matrix and their mechanical properties. The correlations will be established and explained based on interfaces realized between the polymer matrix and inorganic filler. The paper focuses on the influence of the composition parameters (type of polymeric matrix, TiO2 filler with surface modified/unmodified, additives) and technological parameters (processing methods, temperature, time, pressure) on the mechanical strength of TiO2 nanocomposites with the polymeric matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Titanium dioxide photocatalysis
Fujishima, A., Rao, T. N., & Tryk, D. A. (2000) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/s1389-5567(00)00002-2 · Cited by 7,916
Gaya, U. I., & Abdullah, A. H. (2008) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2007.12.003 · Cited by 2,984
Herrmann, J.-M. (1999) · Catalysis Today · doi:10.1016/s0920-5861(99)00107-8 · Cited by 2,773
Plueddemann, E. P. (1982) · Springer eBooks · doi:10.1007/978-1-4899-0342-6 · Cited by 2,719
The mechanics of graphene nanocomposites: A review
Young, R. J., Kinloch, I. A., Gong, L., & Novoselov, K. S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.005 · Cited by 1,294
Lithium‐Ion Intercalation into TiO2‐B Nanowires
Armstrong, A. R., Armstrong, G., Canales, J., García, R., & Bruce, P. G. (2005) · Advanced Materials · doi:10.1002/adma.200400795 · Cited by 824
Polymer-Nanoparticle Composites: From Synthesis to Modern Applications
Hanemann, T., & Szabó, D. V. (2010) · Materials · doi:10.3390/ma3063468 · Cited by 815
The role of van der Waals forces in adhesion of micromachined surfaces
DelRio, F. W., de Boer, M. P., Knapp, J. A., David Reedy, E., Clews, P. J., & Dunn, M. L. (2005) · Nature Materials · doi:10.1038/nmat1431 · Cited by 525
Xia, H., & Wang, Q. (2002) · Chemistry of Materials · doi:10.1021/cm0109591 · Cited by 475
TiO2 nanocomposites with high refractive index and transparency
Tao, P., Li, Y., Rungta, A., Viswanath, A., Gao, J., Benicewicz, B. C., Siegel, R. W., & Schadler, L. S. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm13093e · Cited by 303
Surface Modification to Improve Properties of Materials
Mozetič, M. (2019) · Materials · doi:10.3390/ma12030441 · Cited by 300
Polymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
Fabrication and characterization of TiO2–epoxy nanocomposite
Chatterjee, A., & Islam, M. S. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2007.11.052 · Cited by 289
Review of the progress in preparing nano TiO2: An important environmental engineering material
Wang, Y., He, Y., Lai, Q., & Fan, M. (2014) · Journal of Environmental Sciences · doi:10.1016/j.jes.2014.09.023 · Cited by 278
Liu, Y.-L., Su, Y.-H., & Lai, J.-Y. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.006 · Cited by 239
Xu, Q. F., Liu, Y., Lin, F.-J., Mondal, B., & Lyons, A. M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401668y · Cited by 225
Studies on the photocatalytic hydrogen production using suspended modified photocatalysts
NADA, A., Barakat, M. A. E.-F., HAMED, H., et al. (2004) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2004.06.007 · Cited by 209
Silane Coupling Agents in Polymer-based Reinforced Composites: A Review
Shokoohi, S., Arefazar, A., & Khosrokhavar, R. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407081391 · Cited by 203
Nano-TiO2 Reinforced PEEK/PEI Blends as Biomaterials for Load-Bearing Implant Applications
Díez-Pascual, A. M., & Díez-Vicente, A. L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00210 · Cited by 198
Synthesis of Titanium Dioxide (TiO2) Nanomaterials
Chen, X., & Mao, S. S. (2006) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2006.160 · Cited by 190
Synthesis and Characterization of Photoconducting Polyaniline-TiO2 Nanocomposite
Feng, W., Sun, E., Fujii, A., Wu, H., Niihara, K., & Yoshino, K. (2000) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.73.2627 · Cited by 180
Mechanical properties of epoxy nanocomposites using titanium dioxide as reinforcement – A review
Pinto, D. G., Bernardo, L. F. A., Amaro, A. M., & Lopes, S. M. R. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.124 · Cited by 178
A Review on Synthesis of Nano-TiO2 via Different Methods
Byranvand, M. M., Kharat, A. N., Fatholahi, L., et al. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.7508/jns.2013.01.001 · Cited by 153
Effect of titanium dioxide on the properties of polyethylene/TiO2 nanocomposites
Nguyen, V. G., Hoàng, T., Mai, D. H., et al. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.058 · Cited by 135
Zhang, H., Huang, J., Li, Y., Chen, R., Zou, W., Lin, X., & Qu, J. (2014) · RSC Advances · doi:10.1039/c4ra14538k · Cited by 135
Fiorati, A., Bellingeri, A., Punta, C., Corsi, I., & Venditti, I. (2020) · Polymers · doi:10.3390/polym12081635 · Cited by 126
Composites of thermoplastic starch and nanoclays produced by extrusion and thermopressing
Müller, C. M. O., Laurindo, J. B., & Yamashita, F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.03.035 · Cited by 116
Weng, C.-C., & Wei, K. (2003) · Chemistry of Materials · doi:10.1021/cm0300617 · Cited by 89
Mechanical Properties of 3D-Printed Acrylonitrile–Butadiene–Styrene TiO2 and ATO Nanocomposites
Vidakis, N., Petousis, M., Maniadi, A., Koudoumas, E., Liebscher, M., & Tzounis, L. (2020) · Polymers · doi:10.3390/polym12071589 · Cited by 85
Preparation, characterization, and properties of TiO 2 /PLA nanocomposites by in situ polymerization
Zhuang, W., Liu, J., Zhang, J. H., Hu, B. X., & Shen, J. (2008) · Polymer Composites · doi:10.1002/pc.20658 · Cited by 79
Qi, Y., Xiang, B., Tan, W., & Zhang, J. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.234 · Cited by 76
Siloxane−TiO 2 Hybrid Nanocomposites. The Structure of the Hydrophobic Layer
Milanesi, F., Cappelletti, G., Annunziata, R., Bianchi, C. L., Meroni, D., & Ardizzone, S. A. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1014669 · Cited by 74
PEEK -TiO2 composites with enhanced UV resistance
Bragaglia, M., Cherubini, V., & Nanni, F. M. C. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108365 · Cited by 63
Wanag, A., Sienkiewicz, A., Rokicka-Konieczna, P., Kusiak‐Nejman, E., & Morawski, A. W. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103917 · Cited by 61
Rheology and UV-protecting properties of complex suspensions of titanium dioxides and zinc oxides
Nasu, A., & Otsubo, Y. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.02.012 · Cited by 59
Fratoddi, I., Cartoni, A., Venditti, I., Catone, D., O’Keeffe, P., Paladini, A., Toschi, F., Turchini, S., Sciubba, F., Testa, G., et al. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.11.010 · Cited by 59
Preparation of polymer-based nanocomposites by different routes
Oliveira, M., & Machado, A. V. (2013) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 58
Self-Cleaning Ceramic Tiles Produced via Stable Coating of TiO2 Nanoparticles
Shakeri, A., Yip, D., Badv, M., Imani, S. M., Sanjari, M., & Didar, T. F. (2018) · Materials · doi:10.3390/ma11061003 · Cited by 51
Suzuki, N., Kiba, S., Kamachi, Y., Miyamoto, N., & Yamauchi, Y. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp23864k · Cited by 46
Zapata, P. A., Palza, H., Delgado, K., & Rabagliati, F. M. (2012) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26207 · Cited by 44
Potential uses of titanium dioxide in conjunction with ultrasound for improved disinfection
Shimizu, N., Ninomiya, K., Ogino, C., & Rahman, M. (2009) · Biochemical Engineering Journal · doi:10.1016/j.bej.2009.10.009 · Cited by 43
Development of hybrid nanocomposites based on PLLA and low-field NMR characterization
Almeida, A. D. S., Tavares, M. I. B., da Silva, E. O., et al. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.11.005 · Cited by 39
TiO2–active carbon composites for wastewater photocatalysis
Andronic, L., Eneşca, A., Cazan, C., & Vişa, M. (2014) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-014-3393-6 · Cited by 36
Self-citationFronza, B. M., Lewis, S. H., Shah, P. K., Barros, M. D., Giannini, M., & Stansbury, J. W. (2019) · Dental Materials · doi:10.1016/j.dental.2019.03.007 · Cited by 34
An in vitro controlled release study of valproic acid encapsulated in a titania ceramic matrix
Uddin, M. J., Mondal, D., Morris, C. A., López, T., Diebold, U., & Gonzalez, R. D. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.03.079 · Cited by 27
Influence of TiO2Nanoparticle Filler on the Properties of PET and PLA Nanocomposites
Farhoodi, M., Dadashi, S., Mousavi, S. M. A., Sotudeh‐Gharebagh, R., Emam‐Djomeh, Z., Oromiehie, A., & Hemmati, F. (2012) · Polymer(Korea) · doi:10.7317/pk.2012.36.6.745 · Cited by 26
Mikešová, J., Šlouf, M., Gohs, U., Popelková, D., Vacková, T., Vu, N. H., Kratochvíl, J., & Zhigunov, A. (2014) · Polymer Bulletin · doi:10.1007/s00289-013-1093-y · Cited by 24
Alberton, J., Martelli, S. M., Fakhouri, F. M., & Soldi, V. (2014) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/64/1/012010 · Cited by 21
Preparation and shape memory properties of TiO2/PLCL biodegradable polymer nanocomposites
LU, X.-L., LÜ, X.-Q., WANG, J.-Y., SUN, Z.-J., & TONG, Y.-X. (2013) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(13)62437-1 · Cited by 18
Metadata
- Authors
- Cazan, C., Enesca, A., & Andronic, L.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-06-20
- Volume
- 13
- Issue
- 12
- Pages
- 2017
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3177275953
- Cited by
- 293
- References
- 50
- FWCI
- 11.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.