The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
The Application of Polycaprolactone in Three-Dimensional Printing Scaffolds for Bone Tissue Engineering
Open accessAbstract
Bone tissue engineering commonly encompasses the use of three-dimensional (3D) scaffolds to provide a suitable microenvironment for the propagation of cells to regenerate damaged tissues or organs. 3D printing technology has been extensively applied to allow direct 3D scaffolds manufacturing. Polycaprolactone (PCL) has been widely used in the fabrication of 3D scaffolds in the field of bone tissue engineering due to its advantages such as good biocompatibility, slow degradation rate, the less acidic breakdown products in comparison to other polyesters, and the potential for loadbearing applications. PCL can be blended with a variety of polymers and hydrogels to improve its properties or to introduce new PCL-based composites. This paper describes the PCL used in developing state of the art of scaffolds for bone tissue engineering. In this review, we provide an overview of the 3D printing techniques for the fabrication of PCL-based composite scaffolds and recent studies on applications in different clinical situations. For instance, PCL-based composite scaffolds were used as an implant surgical guide in dental treatment. Furthermore, future trend and potential clinical translations will be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
A 3D-Printed PLCL Scaffold Coated with Collagen Type I and Its Biocompatibility
He, Y., Liu, W., Guan, L., Chen, J., Duan, L., Jia, Z., Huang, J., Li, W., Liu, J., Xiong, J., et al. (2018) · BioMed Research International · doi:10.1155/2018/5147156 · Cited by 63
Self-citation
Cited by
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Farjaminejad, S., Farjaminejad, R., Hasani, M., Garcia-Godoy, F., Abdouss, M., Marya, A., Harsoputranto, A., & Jamilian, A. (2024) · Polymers · doi:10.3390/polym16233303 · Cited by 158
“The precise control over pore size and scaffold architecture in 3D-printed PCL scaffolds enhances their mechanical properties and ensures adequate cellular infiltration and vascularisation, which are essential for bone regeneration [41].”
Nanomaterials: Breaking through the bottleneck of tumor immunotherapy
Kang, Y., & Li, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123159 · Cited by 61
Novel approaches and biomaterials for bone tissue engineering: a focus on silk fibroin
Paladini, F., & Pollini, M. (2022) · Materials · doi:10.3390/ma15196952 · Cited by 51
Šebová, E., Leal, F., Klusáček Rampichová, M., Nirwan, V. P., Fahmi, A., Costa, P. F., & Filová, E. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26115383 · Cited by 4
“Poly(lactic acid) (PLA) [20,21], poly( ε -caprolactone) (PCL) [22], poly(lactic-co-glycolic acid) (PLGA) [23–25], or polyethylene glycol [26] are utilized in bone tissue engineering due to their biocompatibility and/or biodegradability, supporting cell adhesion, proliferation and differentiation.”
Metadata
- Authors
- Yang, X., Wang, Y., Zhou, Y., Chen, J., & Wan, Q.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-08-17
- Volume
- 13
- Issue
- 16
- Pages
- 2754
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3195494870
- Cited by
- 221
- References
- 2
- FWCI
- 9.66
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Application of Polycaprolactone in Three-Dimensional Printing Scaffolds for Bone Tissue Engineering. https://app.cochat.ai/papers/10.3390/polym13162754
- The paper
- Yang, X., Wang, Y., Zhou, Y., Chen, J., & Wan, Q. (2021). The Application of Polycaprolactone in Three-Dimensional Printing Scaffolds for Bone Tissue Engineering. Polymers. https://doi.org/10.3390/polym13162754
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.