The DOI matches its Crossref record; 146 of the 146 references it cites were found in a registry or an index.
Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications and Cost
Open accessAbstract
Increasing scientific interest has occurred concerning the utilization of natural fiber-enhanced hybrid composites that incorporate one or more types of natural enhancement. Annual natural fiber production is estimated to be 1,783,965 × 103 tons/year. Extensive studies have been conducted in the domains of natural/synthetic as well as natural/natural hybrid composites. As synthetic fibers have better rigidity and strength than natural fibers, natural/synthetic hybrid composites have superior qualities via hybridization compared to natural composites in fibers. In general, natural fiber compounds have lower characteristics, limiting the use of natural composites reinforced by fiber. Significant effort was spent in enhancing the mechanical characteristics of this group of materials to increase their strengths and applications, especially via the hybridization process, by manipulating the characteristics of fiber-reinforced composite materials. Current studies concentrate on enhancing the understanding of natural fiber-matrix adhesion, enhancing processing methods, and natural fiber compatibility. The optimal and resilient conceptions have also been addressed due to the inherently more significant variabilities. Moreover, much research has tackled natural fiber reinforced hybrid composite costs. In addition, this review article aims to offer a review of the variables that lead to the mechanical and structural failure of natural fiber reinforced polymer composites, as well as an overview of the details and costings of the composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
Progress Report on Natural Fiber Reinforced Composites: Progress Report on Natural Fiber Composites
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 997
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Malkapuram, R., Kumar, V., & Negi, Y. S. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407087759 · Cited by 813
Plant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764
Aziz, S. H., & Ansell, M. P. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.10.001 · Cited by 682
Kenaf reinforced biodegradable composite
Nishino, T., Hirao, K., Kotera, M., Nakamae, K., & Inagaki, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00099-x · Cited by 676
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
Ecodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 644
Thwe, M. M., & Liao, K. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00071-9 · Cited by 619
Norizan, M. N., Asyraf, M. R. M., Rayung, M., Norrrahim, M. N. F., Shazleen, S. S., Rani, M. S. A., Shafi, A. R., Aisyah, H. A., Radzi, M. H. M., Sabaruddin, F. A., et al. (2021) · Polymers · doi:10.3390/polym13162710 · Cited by 612
Self-citationDurability of bamboo-glass fiber reinforced polymer matrix hybrid composites
Thwe, M. M., & Liao, K. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00225-7 · Cited by 576
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Self-citationApplications of Natural Fibers and Its Composites: An Overview
Sanjay, M. R., Arpitha, G. R., Naik, L. L., Gopalakrishna, K., & Yogesha, B. (2016) · Natural Resources · doi:10.4236/nr.2016.73011 · Cited by 550
Joseph, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00098-2 · Cited by 538
Joseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 503
Alavudeen, A., Rajini, N., Karthikeyan, S., Thiruchitrambalam, M., & Venkateshwaren, N. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.067 · Cited by 493
Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
Yu, T., Ren, J., Li, S., Yuan, H., & Li, Y. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.12.006 · Cited by 485
Nurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Self-citationVan de Weyenberg, I., Chi Truong, T., Vangrimde, B., & Verpoest, I. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.08.016 · Cited by 459
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Self-citationMechanical properties evaluation of sisal fibre reinforced polymer composites: A review
Senthilkumar, K., Saba, N., Rajini, N., Chandrasekar, M., Jawaid, M., Siengchin, S., & Alotman, O. Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.143 · Cited by 415
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Journal of Food Science and Technology · doi:10.1007/s13197-015-2009-7 · Cited by 399
Self-citationA Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Self-citationManfredi, L. B., Rodríguez, E. S., Wladyka-Przybylak, M., & Vázquez, A. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.05.003 · Cited by 367
Natural fibre-polymer composites
Satyanarayana, K. G., Sukumaran, K., Mukherjee, P. S., Pavithran, C., & Pillai, S. G. K. (1990) · Cement and Concrete Composites · doi:10.1016/0958-9465(90)90049-4 · Cited by 364
Extraction and preparation of bamboo fibre-reinforced composites
Zakikhani, P., Zahari, R., Sultan, M. T. H., & Majid, D. L. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.058 · Cited by 361
Self-citationArbelaiz, A., Fernández, B., Cantero, G., Llano-Ponte, R., Valea, A., & Mondragon, I. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.03.021 · Cited by 352
Mechanical properties of short-flax-fibre reinforced compounds
Bos, H. L., Müssig, J., & van den Oever, M. J. A. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.10.011 · Cited by 322
Functionalization, compatibilization and properties of polypropylene composites with Hemp fibres
Pracellà, M., Chionna, D., Anguillesi, I., Kulinski, Z., & Piórkowska, E. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.12.006 · Cited by 317
Alamri, H., & Low, I. M. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.04.002 · Cited by 305
Chaudhary, V., Bajpai, P. K., & Maheshwari, S. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1320260 · Cited by 299
Short Banana Fiber Reinforced Polyester Composites: Mechanical, Failure and Aging Characteristics
Pothan, L. A., Thomas, S., & Neelakantan, N. R. (1997) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168449701600806 · Cited by 294
Pappu, A., Pickering, K. L., & Thakur, V. K. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.05.040 · Cited by 292
Cracking mechanisms in durable sisal fiber reinforced cement composites
Silva, F. D. A., Mobasher, B., & Filho, R. D. T. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.07.004 · Cited by 285
Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite
Srinivasan, V., Boopathy, S. R., N, S. D., & Ramnath, B. V. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.014 · Cited by 280
A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
Aisyah, H. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Khalina, A., Nurazzi, N. M., Lee, S. H., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13030471 · Cited by 263
Self-citationPothan, L. A., Thomas, S., & Groeninckx, G. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.09.001 · Cited by 257
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Self-citationHarussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149911 · Cited by 255
Self-citationAbaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites
Bledzki, A. K., Mamun, A. A., & Faruk, O. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.104 · Cited by 254
Akil, H. M., Santulli, C., Sarasini, F., Tirillò, J., & Valente, T. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.01.017 · Cited by 250
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Atikah, M. S. N., Mohd Nurazzi, N., Atiqah, A., Ansari, M. N. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.028 · Cited by 250
Self-citationChan, J. X., Wong, J. F., Petrů, M., Hassan, A., Nirmal, U., Othman, N., & Ilyas, R. A. (2021) · Polymers · doi:10.3390/polym13172867 · Cited by 249
Self-citationPhysical Properties of Thermoplastic Starch Derived from Natural Resources and Its Blends: A Review
Diyana, Z. N., Jumaidin, R., Selamat, M. Z., Ghazali, I., Julmohammad, N., Huda, N., & Ilyas, R. A. (2021) · Polymers · doi:10.3390/polym13091396 · Cited by 243
Self-citationLopattananon, N., Panawarangkul, K., Sahakaro, K., & Ellis, B. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24584 · Cited by 242
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Asrofi, M., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.011 · Cited by 240
Self-citationFracture and fatigue of natural fiber-reinforced cementitious composites
Savastano, H., Santos, S. F., Radonjic, M., & Soboyejo, W. O. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.02.006 · Cited by 230
NAYAK, S. K., Mohanty, S., & Samal, S. K. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.06.020 · Cited by 228
Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials
Jústiz-Smith, N. G., Virgo, G. J., & Buchanan, V. E. (2008) · Materials Characterization · doi:10.1016/j.matchar.2007.10.011 · Cited by 227
A review on synthesis and characterization of commercially available natural fibers: Part II
Puttegowda, M., Rangappa, S. M., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S. S., & Yogesha, B. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1379045 · Cited by 220
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2017) · BioResources · doi:10.15376/biores.12.4.8734-8754 · Cited by 218
Self-citationSanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.037 · Cited by 217
Self-citationJumaidin, R., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.01.079 · Cited by 215
Self-citationFully biodegradable natural fiber composites from renewable resources: All-plant fiber composites
Zhang, M., RONG, M., & LU, X. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.06.018 · Cited by 213
Creep and dynamic mechanical behavior of PP–jute composites: Effect of the interfacial adhesion
Acha, B. A., Reboredo, M. M., & Marcovich, N. E. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.003 · Cited by 212
The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Liu, Q., & Hughes, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.008 · Cited by 209
Chemical modification of flax reinforced polypropylene composites
John, M. J., & Anandjiwala, R. D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.007 · Cited by 208
Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review
Suriani, M. J., Rapi, H. Z., Ilyas, R. A., Petrů, M., & Sapuan, S. M. (2021) · Polymers · doi:10.3390/polym13081323 · Cited by 200
Self-citationPolypropylene composites with enzyme modified abaca fibre
Bledzki, A. K., Mamun, A. A., Jaszkiewicz, A., & Erdmann, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.02.003 · Cited by 198
Ishikawa, A., Okano, T., & Sugiyama, J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00516-2 · Cited by 197
Bakare, I. O., Okieimen, F. E., Pavithran, C., Abdul Khalil, H. P. S., & Brahmakumar, M. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.04.013 · Cited by 196
Edhirej, A., Sapuan, S. M., Jawaid, M., & Zahari, N. I. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.045 · Cited by 193
Self-citationMishra, S., Misra, M., Tripathy, S. S., NAYAK, S. K., & Mohanty, A. K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1106/qwr6-32vv-k720-596d · Cited by 190
KHANAM, P. N., Khalil, H. P. S. A., Jawaid, M., Reddy, G. R., Narayana, C. S., & Naidu, S. V. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0210-3 · Cited by 185
Biodegradation of aliphatic polyester composites reinforced by abaca fiber
Teramoto, N., Urata, K., Ozawa, K., & Shibata, M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.026 · Cited by 185
Ilyas, R., Sapuan, S., Atikah, M., Asyraf, M., Rafiqah, S. A., Aisyah, H., Nurazzi, N. M., & Norrrahim, M. (2021) · Textile Research Journal · doi:10.1177/0040517520932393 · Cited by 183
Self-citationMechanical Properties of Natural Fibre Mat Reinforced Thermoplastic
Oksman, K. (2000) · Applied Composite Materials · doi:10.1023/a:1026546426764 · Cited by 182
Alotaibi, M. D., Alshammari, B. A., Saba, N., Alothman, O. Y., Sanjay, M. R., Almutairi, Z., & Jawaid, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.05.102 · Cited by 179
Atiqah, A., Jawaid, M., Sapuan, S. M., Ishak, M. R., Ansari, M. N. M., & Ilyas, R. A. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.06.032 · Cited by 178
Self-citationSanjay, M. R., Arpitha, G. R., Senthamaraikannan, P., Kathiresan, M., Saibalaji, M. A., & Yogesha, B. (2019) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1431828 · Cited by 175
Lodha, P., & Netravali, A. N. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.12.036 · Cited by 172
Ilyas, R. A., Sapuan, S. M., Atiqah, A., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Nurazzi, N. M., Atikah, M. S. N., Ansari, M. N. M., et al. (2020) · Polymer Composites · doi:10.1002/pc.25379 · Cited by 172
Self-citationSapuan, S. M., Aulia, H. S., Ilyas, R. A., Atiqah, A., Dele-Afolabi, T. T., Nurazzi, M. N., Supian, A. B. M., & Atikah, M. S. N. (2020) · Polymers · doi:10.3390/polym12102211 · Cited by 172
Self-citationCharacterization of sugar palm (Arenga pinnata) fibres: Tensile and thermal properties
Ishak, M. R., Sapuan, S. M., Leman, Z., Rahman, M. Z. A., & Uyup, M. K. A. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1785-1 · Cited by 166
Self-citationBiobased composites from glyoxal–phenolic resins and sisal fibers
Ramires, E. C., Megiatto, J. D., Gardrat, C., Castellan, A., & Frollini, E. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.10.005 · Cited by 162
The use of unretted hemp fibre in composite manufacture
Hepworth, D. G., Hobson, R. N., Bruce, D. M., & Farrent, J. W. (2000) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(00)00098-1 · Cited by 161
Thiagamani, S. M. K., Krishnasamy, S., Muthukumar, C., Tengsuthiwat, J., Nagarajan, R., Siengchin, S., & Ismail, S. O. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.166 · Cited by 161
Ramlee, N. A., Jawaid, M., Zainudin, E. S., & Yamani, S. A. K. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.06.016 · Cited by 158
Suppakarn, N., & Jarukumjorn, K. (2009) · Composites Part B Engineering · doi:10.1016/j.compositesb.2009.04.005 · Cited by 154
Ray, D., Sarkar, B., & Bose, N. R. (2002) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00096-3 · Cited by 144
Jamal, T., Sapuan, S. M., Khalina, A., Sherwani, S. F. K., Yusuf, J., & Ilyas, R. A. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.05.047 · Cited by 143
Self-citationKunanopparat, T., Menut, P., Morel, M. H., & Guilbert, S. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.02.001 · Cited by 142
Green composites. I. physical properties of ramie fibers for environment-friendly green composites
Nam, S., & Netravali, A. N. (2006) · Fibers and Polymers · doi:10.1007/bf02875769 · Cited by 141
Hemp fibre reinforced composites using chelator and enzyme treatments
Li, Y., & Pickering, K. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.08.022 · Cited by 141
Kadier, A., Ilyas, R. A., Huzaifah, M. R. M., Harihastuti, N., Sapuan, S. M., Harussani, M. M., Azlin, M. N. M., Yuliasni, R., Ibrahim, R., Atikah, M. S. N., et al. (2021) · Polymers · doi:10.3390/polym13193365 · Cited by 140
Self-citationYing-Chen, Z., Wu, H., & Qiu, Y. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.007 · Cited by 137
Rozilah, A., Jaafar, C. N. A., Sapuan, S. M., Zainol, I., & Ilyas, R. A. (2020) · Polymers · doi:10.3390/polym12112605 · Cited by 137
Self-citationEnvironmental effects on bamboo-glass/polypropylene hybrid composites
Thwe, M. M., & Liao, K. (2003) · Journal of Materials Science · doi:10.1023/a:1021130019435 · Cited by 134
Radzi, A. M., Sapuan, S. M., Jawaid, M., & Mansor, M. R. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.07.007 · Cited by 133
Self-citationJamadi, A. H., Razali, N., Petrů, M., Taha, M. M., Muhammad, N., & Ilyas, R. A. (2021) · Polymers · doi:10.3390/polym13193299 · Cited by 130
Self-citationPreparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites
Romanzini, D., Ornaghi, H. L., Amico, S. C., & Zattera, A. J. (2012) · Materials Research · doi:10.1590/s1516-14392012005000050 · Cited by 129
Biopolymers and Biocomposites: Chemistry and Technology
Ilyas, R. A., & Sapuan, S. M. (2020) · Current Analytical Chemistry · doi:10.2174/157341101605200603095311 · Cited by 129
Self-citationTreatments of natural fiber as reinforcement in polymer composites—a short review
Norizan, M. N., Harussani, M. M., Aisyah, H. A., Ilyas, R. A., Norrrahim, M. N. F., Khalina, A., & Abdullah, N. (2021) · Functional Composites and Structures · doi:10.1088/2631-6331/abff36 · Cited by 129
Self-citationAlamri, H. R., & Low, I. M. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.06.001 · Cited by 128
The durability of jute fibre-reinforced phenolic composites
Singh, B., Gupta, M., & Verma, A. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00172-4 · Cited by 126
Azammi, A. M. N., Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Asrofi, M., & Atiqah, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102665-6.00003-0 · Cited by 124
Self-citationThermal properties of pineapple leaf fiber reinforced composites
Mangal, R., Saxena, N. S., Sreekala, M. S., Thomas, S., & Singh, K. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00166-1 · Cited by 123
Sabaruddin, F. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Lee, S. H., Abdan, K., Mazlan, N., Roseley, A. S. M., & Khalil, H. P. S. A. (2020) · Polymers · doi:10.3390/polym13010116 · Cited by 122
Self-citationTensile properties of wood flour/kenaf fiber polypropylene hybrid composites
Mirbagheri, J., Tajvidi, M., Hermanson, J. C., & Ghasemi, I. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26363 · Cited by 120
Prasad, N., Agarwal, V. K., & Sinha, S. (2016) · Iranian Polymer Journal · doi:10.1007/s13726-016-0416-x · Cited by 113
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012006 · Cited by 113
Self-citationIbrahim, M. I. J., Sapuan, S. M., Zainudin, E. S., & Zuhri, M. Y. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.045 · Cited by 109
Self-citationFabrizio Sarasini, A., Tirillò, J., Sergi, C., Seghini, M. C., Cozzarini, L., & Graupner, N. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.01.046 · Cited by 107
Stuart, T., Liu, Q., Hughes, M., et al. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.06.002 · Cited by 105
Pandita, S. D., Yuan, X., Manan, M. A., Lau, C. H., Subramanian, A. S., & Wei, J. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413505349 · Cited by 102
Li, Y., Pickering, K. L., & Farrell, R. L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.018 · Cited by 101
Zhong, L. X., Fu, S. Y., Zhou, X. S., & Zhan, H. Y. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.11.010 · Cited by 100
Almansour, F. A., Dhakal, H. N., & Zhang, Z. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.11.016 · Cited by 92
Development and Characterization of Fenugreek Protein-Based Edible Film
Kumari, N., Bangar, S. P., Petrů, M., Ilyas, R. A., Singh, A. P., & Kumar, P. (2021) · Foods · doi:10.3390/foods10091976 · Cited by 90
Self-citationSaidane, E. H., Scida, D., Pac, M.-J., et al. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.02.022 · Cited by 88
Junior, J. D. M., da Silva, C. G., Rosa, D. D. S., & Frollini, E. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.03.011 · Cited by 87
Fiore, V., Scalici, T., Fabrizio Sarasini, A., Tirillò, J., & Calabrese, L. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.031 · Cited by 81
Jaafar, C. N. A., Zainol, I., Ishak, N. S., Ilyas, R. A., & Sapuan, S. M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.03.020 · Cited by 76
Self-citationStudy of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate
Mir, A., Zitoune, R., Collombet, F., & Bezzazi, B. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684409341672 · Cited by 75
Greener Pretreatment Approaches for the Valorisation of Natural Fibre Biomass into Bioproducts
Norrrahim, M. N. F., Roslim, M. H. M., Farid, M. A. A., Shazleen, S. S., Misenan, M. S. M., Yasim‐Anuar, T. A. T., Naveen, J., Norizan, M. N., Rani, M. S. A., Hakimi, M. I., et al. (2021) · Polymers · doi:10.3390/polym13172971 · Cited by 75
Self-citationNazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Tawakkal, I. S. M. A., & Ilyas, R. A. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0033 · Cited by 72
Self-citationLee, C. H., Abdan, K., Norizan, M. N., Norli, A., Harussani, M. M., Rafiqah, S. A., Aisyah, H. A., & Ramli, N. (2021) · Polymers · doi:10.3390/polym13091390 · Cited by 71
Self-citationNanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications
Ilyas, R. A., Sapuan, S. M., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Kadier, A., Kalil, M. S., Atikah, M. S. N., Ibrahim, R., Asrofi, M., Abral, H., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00006-8 · Cited by 67
Self-citationJunior, J. D. M., Ramires, E. C., & Frollini, E. (2009) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.10.001 · Cited by 64
Novel low-cost jute-polyester composites. III. Weathering and thermal behavior
Dash, B. N., Rana, A. K., Mishra, H. K., NAYAK, S. K., & Tripathy, S. S. (2000) · Journal of Applied Polymer Science · Cited by 62
El-Meligy, M. G., Mohamed, S. H., & Mahani, R. M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.034 · Cited by 60
Harussani, M. M., Sapuan, S. M., Rashid, U., & Khalina, A. (2021) · Polymers · doi:10.3390/polym13111707 · Cited by 58
Self-citationXu, H. Y., Wang, L., Teng, C., & Yu, M. (2008) · Polymer Bulletin · doi:10.1007/s00289-008-0986-7 · Cited by 57
Baihaqi, N. M. Z. N., Khalina, A., Norizan, M. N., Aisyah, H. A., Sapuan, S. M., & Ilyas, R. A. (2021) · Polimery · doi:10.14314/polimery.2021.1.5 · Cited by 53
Self-citationApplications of Bio-Composites in Industrial Products
Kandachar, P., & Brouwer, R. (2001) · MRS Proceedings · doi:10.1557/proc-702-u4.1.1 · Cited by 52
Ramesh, M., Deepa, C., Arpitha, G. R., & Gopinath, V. (2019) · World Journal of Engineering · doi:10.1108/wje-04-2018-0125 · Cited by 51
Characteristics and Properties of Lemongrass (Cymbopogan Citratus): A Comprehensive Review
Kamaruddin, Z. H., Jumaidin, R., Selamat, M. Z., & Ilyas, R. A. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2021.1958439 · Cited by 51
Self-citationStress relaxation behaviour in oil palm fibres
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (2001) · Materials Letters · doi:10.1016/s0167-577x(01)00237-3 · Cited by 49
Composites based on conductive polymer with carbon nanotubes in DMMP gas sensors – an overview
Norizan, M. N., Harussani, M. M., Demon, S. Z. N., Norhana, A. H., Mohamad, I. S., & Norli, A. (2021) · Polimery · doi:10.14314/polimery.2021.2.1 · Cited by 49
Self-citationJha, K., Tyagi, Y. K., Kumar, R., Sharma, S. K., Roslim, M. H. M., Li, C., Ilyas, R. A., Dwivedi, S. P., Saxena, A., & Pramanik, A. (2021) · Polymers · doi:10.3390/polym13193260 · Cited by 49
Self-citationTamrakar, S., Kızıltaş, A., Mielewski, D., & Zander, R. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108805 · Cited by 48
Hazrol, M. D., Sapuan, S. M., Ilyas, R. A., Othman, M. L., & Sherwani, S. F. K. (2020) · Polimery · doi:10.14314/polimery.2020.5.4 · Cited by 47
Self-citationCharacterization of benzoyl treated sugar palm/glass fibre hybrid composites
Safri, S. N. A., Sultan, M. T. H., & Shah, A. U. M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.057 · Cited by 45
Self-citationMüssig, J. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0089-4 · Cited by 41
Bonnia, N. N., Ahmad, S., Zainol, I., Mamun, A. A., Beg, M. D. H., & Bledzki, A. K. (2010) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2010.10 · Cited by 31
The effect of chelator and white rot fungi treatments on long hemp fibre-reinforced composites
Li, Y., & Pickering, K. L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.037 · Cited by 22
Bonding Mechanism and Interface Enhancement of Bamboo Fiber Reinforced Composites
Asrafuzzaman, Amin, K. F., Sharif, A., & Hoque, M. E. (2020) · Springer eBooks · doi:10.1007/978-981-15-8489-3_12 · Cited by 16
Wahab, M. A. F. A., Sapuan, S. M., Harussani, M. M., Zuhri, M. Y. M., & Saleh, A. A. (2021) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2021.016221 · Cited by 15
Self-citationStress corrosion cracking (SCC) in polymer composites
Lim, J. K. (2011) · Elsevier eBooks · doi:10.1533/9780857093769.3.485 · Cited by 5
Cited by
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Self-citationRanakoti, L., Gangil, B., Mishra, S. K., Singh, T., Sharma, S., Ilyas, R. A., & El-Khatib, S. (2022) · Materials · doi:10.3390/ma15124312 · Cited by 311
Self-citation
Metadata
- Authors
- Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., Azman, M. A., Radzi, F. S. M., & Sharma, S.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-10-13
- Volume
- 13
- Issue
- 20
- Pages
- 3514
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3205624801
- Cited by
- 285
- References
- 146
- FWCI
- 12.10
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.