The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Polydimethylsiloxane Composites Characterization and Its Applications: A Review
Open accessAbstract
Polydimethylsiloxane (PDMS) is one of the most promising elastomers due its remarkable proprieties such as good thermal stability, biocompatibility, corrosion resistance, flexibility, low cost, ease of use, chemically inertia, hyperplastic characteristics, and gas permeability. Thus, it can be used in areas such as microfluidic systems, biomedical devices, electronic components, membranes for filtering and pervaporation, sensors, and coatings. Although pure PDMS has low mechanical properties, such as low modulus of elasticity and strength, it can be improved by mixing the PDMS with other polymers and by adding particles or reinforcements. Fiber-reinforced PDMS has proved to be a good alternative to manufacturing flexible displays, batteries, wearable devices, tactile sensors, and energy harvesting systems. PDMS and particulates are often used in the separation of liquids from wastewater by means of porosity followed by hydrophobicity. Waxes such as beeswax and paraffin have proved to be materials capable of improving properties such as the hydrophobic, corrosion-resistant, thermal, and optical properties of PDMS. Finally, when blended with polymers such as poly (vinyl chloride-co-vinyl acetate), PDMS becomes a highly efficient alternative for membrane separation applications. However, to the best of our knowledge there are few works dedicated to the review and comparison of different PDMS composites. Hence, this review will be focused on PDMS composites, their respective applications, and properties. Generally, the combination of elastomer with fibers, particles, waxes, polymers, and others it will be discussed, with the aim of producing a review that demonstrates the wide applications of this material and how tailored characteristics can be reached for custom applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies
Sia, S. K., & Whitesides, G. M. (2003) · ELECTROPHORESIS · doi:10.1002/elps.200305584 · Cited by 1,717
Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering
Johnston, I. D., McCluskey, D. K., Tan, C. K. L., & Tracey, M. C. (2014) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/24/3/035017 · Cited by 1,495
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings
Musil, J., Kunc, F., Zeman, H., & Poláková, H. (2002) · Surface and Coatings Technology · doi:10.1016/s0257-8972(01)01714-5 · Cited by 801
Heinrich, G., Klüppel, M., & Vilgis, T. A. (2002) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(02)00030-x · Cited by 669
Eduok, U., Faye, O., & Szpunar, J. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.05.012 · Cited by 661
Carbon Black: Science and Technology
Donnet, J.-B., Bansal, R. C., & Wang, M.-J. (2018) · Routledge eBooks · doi:10.1201/9781315138763 · Cited by 495
Printed multifunctional flexible device with an integrated motion sensor for health care monitoring
Yamamoto, Y., Harada, S., Yamamoto, D., Honda, W., Arie, T., Akita, S., & Takei, K. (2016) · Science Advances · doi:10.1126/sciadv.1601473 · Cited by 386
Hwang, J., Kim, Y., Yang, H., & Oh, J. H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108607 · Cited by 385
An, A. K., Guo, J., Lee, E.-J., Jeong, S., Zhao, Y., Wang, Z., & Leiknes, T. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.028 · Cited by 383
Khanafer, K., Duprey, A., Schlicht, M., & Berguer, R. (2009) · Biomedical Microdevices · doi:10.1007/s10544-008-9256-6 · Cited by 273
Mahian, O., Bellos, E., Markides, C. N., Taylor, R. A., Alagumalai, A., Yang, L., Qin, C., Lee, B. J., Ahmadi, G., Safaei, M. R., et al. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106069 · Cited by 266
Applications of polydimethylsiloxane in analytical chemistry: A review
Seethapathy, S., & Górecki, T. (2012) · Analytica Chimica Acta · doi:10.1016/j.aca.2012.05.004 · Cited by 242
Yan, J., & Jeong, Y. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02177 · Cited by 235
Montazerian, H., Mohamed, M. G. A., Montazeri, M. M., Kheiri, S., Milani, A. S., Kim, K., & Hoorfar, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.040 · Cited by 232
Feldman, D. (2008) · Designed Monomers and Polymers · doi:10.1163/156855508x292383 · Cited by 189
Surface Modification Techniques for Endothelial Cell Seeding in PDMS Microfluidic Devices
Akther, F., Yakob, S. B., Nguyen, N.-T., & Ta, H. T. (2020) · Biosensors · doi:10.3390/bios10110182 · Cited by 182
Design of biocompatible and biodegradable polymers based on intermediate water concept
Tanaka, M., Sato, K., Kitakami, E., Kobayashi, S., Hoshiba, T., & Fukushima, K. (2015) · Polymer Journal · doi:10.1038/pj.2014.129 · Cited by 176
Study of PDMS characterization and its applications in biomedicine: A review
Apolónia, S., Victor, A., Bragança, Portugal, andrews.va.souza@alunos.ipb.pt, Ribeiro, J., jribeiro@ipb.pt, C. S. A., F. Araújo, F., & fernando.araujo@cefet-rj.br, C. C. A. D. R. D. J. (2019) · Journal of Mechanical Engineering and Biomechanics · doi:10.24243/jmeb/4.1.163 · Cited by 173
Self-citationGao, Z., Song, G., Zhang, X., Li, Q., Yang, S., Wang, T., Li, Y., Zhang, L., Guo, L., & Fu, Y. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128810 · Cited by 167
Carbon fibre/graphene foam/polymer composites with enhanced mechanical and thermal properties
Zhao, Y.-H., Zhang, Y.-F., Bai, S.-L., & Yuan, X.-W. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.03.056 · Cited by 162
Highly Elastic Graphene‐Based Electronics Toward Electronic Skin
Yun, Y. J., Ju, J., Lee, J. H., Moon, S., Park, S., Kim, Y. H., Hong, W. G., Ha, D. H., Jang, H., Lee, G. H., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701513 · Cited by 161
Catarino, S. O., Rodrigues, R. O., Pinho, D., Miranda, J. M., Minas, G. M. H., & Lima, R. A. (2019) · Micromachines · doi:10.3390/mi10090593 · Cited by 157
Self-citationMechanics of elastomeric molecular composites
Millereau, P., Ducrot, É., Clough, J. M., Wiseman, M. E., Brown, H. R., Sijbesma, R. P., & Creton, C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807750115 · Cited by 140
3D Printing Techniques and Their Applications to Organ-on-a-Chip Platforms: A Systematic Review
Carvalho, V. M., Gonçalves, I. M., Lage, T., Rodrigues, R. O., Minas, G. M. H., Teixeira, S., Moita, A., Hori, T., Kaji, H., & Lima, R. A. (2021) · Sensors · doi:10.3390/s21093304 · Cited by 137
Self-citationOrgan‐on‐a‐Chip: A Preclinical Microfluidic Platform for the Progress of Nanomedicine
Rodrigues, R. O., Sousa, P. C., Gaspar, J., Bañobre‐López, M., Lima, R. A., & Minas, G. M. H. (2020) · Small · doi:10.1002/smll.202003517 · Cited by 135
Self-citationSun, W., Kothari, S. H., & Sun, C. C. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.02.051 · Cited by 121
Weng, D., Xu, F., Li, X., Li, Y., & Sun, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08706g · Cited by 118
TiO 2 -PDMS composite sponge for adsorption and solar mediated photodegradation of dye pollutants
Hickman, R., Walker, E., & Chowdhury, S. (2018) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2018.05.015 · Cited by 105
de Souza, R. R., Gonçalves, I. M., Rodrigues, R. O., Minas, G. M. H., Miranda, J. M., Moreira, A. L. N., Lima, R. A., Coutinho, G., Pereira, J. E. C. H., & Moita, A. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117725 · Cited by 105
Self-citationSuperhydrophobic coatings made from biocompatible polydimethylsiloxane and natural wax
Torun, I., Ruzi, M., Er, F., & Önses, M. S. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105279 · Cited by 94
Syafiq, A., Vengadaesvaran, B., Rahim, N. A., Pandey, A. K., Bushroa, A. R., Ramesh, K., & Ramesh, S. S. R. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.02.020 · Cited by 84
Self-similar design for stretchable wireless LC strain sensors
Huang, Y., Dong, W., Huang, T., Wang, Y., Xiao, L. J., Su, Y., & Yin, Z. (2015) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2015.01.004 · Cited by 82
Faustino, V., Rodrigues, R. O., Pinho, D., Costa, E. M., Santos‐Silva, A., Miranda, V. M. P., Amaral, J. S., & Lima, R. A. (2019) · Micromachines · doi:10.3390/mi10100645 · Cited by 73
Self-citationFlexible Lead‐Free Piezoelectric Composite Materials for Energy Harvesting Applications
Stuber, V. L., Deutz, D. B., Bennett, J., Cannel, D., de Leeuw, D. M., van der Zwaag, S., & Groen, P. (2018) · Energy Technology · doi:10.1002/ente.201800419 · Cited by 72
Qian, W., Hu, X., He, W., Zhan, R., Liu, M., Zhou, D., Huang, Y., Hu, X., Wang, Z., Fei, G., et al. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.03.008 · Cited by 70
Pan, Z., Guan, Y., Liu, Y., & Cheng, F. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118273 · Cited by 67
Polymer microfluidic devices: an overview of fabrication methods
Rodrigues, R. O., Lima, R. A., Gomes, H. T., & Silva, A. M. T. (2017) · U Porto Journal of Engineering · doi:10.24840/2183-6493_001.001_0007 · Cited by 61
Self-citationÇelik, N., Şahin, F., Ruzi, M., Yay, M., Ünal, E., & Önses, M. S. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111864 · Cited by 56
Anticorrosive properties of PDMS-Silica coatings: effect of methyl, phenyl and amino groups
Salazar‐Hernández, C., Salazar-Hernández, M., Carrera-Cerritos, R., Mendoza-Miranda, J. M., Elorza-Rodríguez, E., Miranda‐Avilés, R., & Mocada-Sánchez, C. D. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105220 · Cited by 55
Kim, J. M., Wolf, F., & Baier, S. K. (2014) · Tribology International · doi:10.1016/j.triboint.2014.12.010 · Cited by 54
Boas, L. V., Faustino, V., Lima, R. A., Miranda, J. M., Minas, G. M. H., Fernandes, C. S., & Catarino, S. O. (2018) · Micromachines · doi:10.3390/mi9080384 · Cited by 52
Self-citationThe effect of dual-scale carbon fibre network on sensitivity and stretchability of wearable sensors
Zhang, F., Wu, S., Peng, S., & Wang, C. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.06.019 · Cited by 45
Muñoz-Sánchez, B. N., Silva, S. F., Pinho, D., Vega, E. J., & Lima, R. A. (2016) · Biomicrofluidics · doi:10.1063/1.4943007 · Cited by 42
Self-citationPDMS-paraffin/graphene laminated films with electrothermally switchable haze
Park, J. Y., Song, H., Kim, T., Suk, J. W., Kang, T. J., Jung, D., & Kim, Y. H. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.014 · Cited by 40
Facile preparation of superhydrophobic melamine sponge for efficient underwater oil-water separation
Zeng, Z.-W. S., & Taylor, S. E. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.116996 · Cited by 40
Hu, H., Li, S., Ying, C., Zhang, R., Li, Y., Qian, W., Zheng, L. S., Fu, X., Liu, Q., Hu, S., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144126 · Cited by 39
Repositionable pressure-sensitive adhesive possessing thermal-stimuli switchable transparency
Zhang, J., Pu, G., Dubay, M. R., Zhao, Y., & Severtson, S. J. (2012) · Journal of Materials Chemistry C · doi:10.1039/c2tc00471b · Cited by 38
High stiffness polymer composite with tunable transparency
Owuor, P. S., Chaudhary, V., Woellner, C. F., Sharma, V., Ramanujan, R. V., Stender, A. S., Soto, M., Özden, Ş., Barrera, E. V., Vajtai, R., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2017.12.004 · Cited by 35
Al-Handarish, Y., Omisore, O. M., Duan, W., Chen, J., Luo, Z., Akinyemi, T. O., Du, W., Li, H., & Wang, L. (2020) · Nanomaterials · doi:10.3390/nano10101941 · Cited by 35
Carvalho, V. M., Maia, I., Souza, A., Ribeiro, J., Costa, P. F., Puga, H., Teixeira, S., & Lima, R. A. (2020) · The Open Biomedical Engineering Journal · doi:10.2174/1874120702014010087 · Cited by 34
Self-citationHeo, B., Fiola, M., Yang, J. H., & Koh, A. (2020) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2020.100301 · Cited by 33
Sales, F., Souza, A., Ariati, R. M., Noronha, V. T., Giovanetti, E., Lima, R. A., & Ribeiro, J. (2021) · Journal of Composites Science · doi:10.3390/jcs5040110 · Cited by 32
Self-citationFan, S., Liu, J., Tang, X., Wang, W., Xiao, Z., Qiu, B., Wang, Y., Jian, S., Qin, Y., & Wang, Y. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.12.005 · Cited by 30
Toluene optical fibre sensor based on air microcavity in PDMS
Káčik, D., & Martinček, I. (2017) · Optical Fiber Technology · doi:10.1016/j.yofte.2017.01.006 · Cited by 29
Smith, J. A. M., Li, S., Mele, E., Goulas, A., Engstrøm, D. S., & Silberschmidt, V. V. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.104291 · Cited by 29
Nam, Y.-H., Lee, S.-K., Kim, J., & Park, J. (2019) · Microelectronic Engineering · doi:10.1016/j.mee.2019.111008 · Cited by 28
Materials Used in Medical Devices
Sastri, V. R. (2010) · Plastics in Medical Devices · doi:10.1016/b978-0-8155-2027-6.10003-0 · Cited by 24
López, M., Rubio, M., Sadek, S. H., et al. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.03.022 · Cited by 22
Polymers for advanced applications
Arshad, M., Zubair, M., Rahman, S. S., & Ullah, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816806-6.00014-5 · Cited by 21
An Experimental Study on Stretchy and Tough PDMS/Fabric Composites
CHANG, R., Zhou, C., Yu, C., & Song, J. (2018) · Journal of Applied Mechanics · doi:10.1115/1.4041679 · Cited by 20
Maia, I., Rocha, C., Pontes, P., Cardoso, V. F., Miranda, J. M., Moita, A., Minas, G. M. H., Moreira, A. L. N., & Lima, R. A. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.89735 · Cited by 20
Self-citationLiu, B., Koh, D., Wang, A., Schneider, P., & Oh, K. W. (2017) · Microsystem Technologies · doi:10.1007/s00542-017-3600-9 · Cited by 7
Optimizing and evaluating the biocompatibility of fiber composites with calcium phosphate additives
Suchý, T., Balík, K., Sucharda, Z., Sochor, M., Lapčíková, M., & Sedláček, R. (2011) · Wiener Medizinische Wochenschrift · doi:10.1007/s10354-011-0913-7 · Cited by 4
Cited by
Properties and Applications of PDMS for Biomedical Engineering: A Review
Miranda, I., Souza, A., Sousa, P., Ribeiro, J., Castanheira, E. M. S., Lima, R., & Minas, G. (2021) · Journal of Functional Biomaterials · doi:10.3390/jfb13010002 · Cited by 824
Self-citationHegde, C., Su, J., Tan, J. M. R., He, K., Chen, X., & Magdassi, S. (2023) · ACS Nano · doi:10.1021/acsnano.3c04089 · Cited by 384
Metadata
- Authors
- Ariati, R., Sales, F., Souza, A., Lima, R. A., & Ribeiro, J.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-12-05
- Volume
- 13
- Issue
- 23
- Pages
- 4258
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4200280016
- Cited by
- 440
- References
- 65
- FWCI
- 12.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.