Evaluation of the Physical and Shape Memory Properties of Fully Biodegradable Poly(lactic acid) (PLA)/Poly(butylene adipate terephthalate) (PBAT) Blends
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Biodegradable polymers have recently become popular; in particular, blends of poly(lactic acid) (PLA) and poly(butylene adipate terephthalate) (PBAT) have recently attracted significant attention due to their potential application in the packaging field. However, there is little information about the thermomechanical properties of these blends and especially the effect induced by the addition of PBAT on the shape memory properties of PLA. This work, therefore, aims at producing and investigating the microstructural, thermomechanical and shape memory properties of PLA/PBAT blends prepared by melt compounding. More specifically, PLA and PBAT were melt-blended in a wide range of relative concentrations (from 85/15 to 25/75 wt%). A microstructural investigation was carried out, evidencing the immiscibility and the low interfacial adhesion between the PLA and PBAT phases. The immiscibility was also confirmed by differential scanning calorimetry (DSC). A thermogravimetric analysis (TGA) revealed that the addition of PBAT slightly improved the thermal stability of PLA. The stiffness and strength of the blends decreased with the PBAT amount, while the elongation at break remained comparable to that of neat PLA up to a PBAT content of 45 wt%, while a significant increment in ductility was observed only for higher PBAT concentrations. The shape memory performance of PLA was impaired by the addition of PBAT, probably due to the low interfacial adhesion observed in the blends. These results constitute a basis for future research on these innovative biodegradable polymer blends, and their physical properties might be further enhanced by adding suitable compatibilizers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Are biodegradable plastics a promising solution to solve the global plastic pollution?
Shen, M., Song, B., Zeng, G., Zhang, Y., Huang, W., Wen, X., & Tang, W. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114469 · Cited by 656
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637 · cited 2×
“PLA is the most used biodegradable polymer in the food packaging industry and it is commercialized mainly for single-use disposal packaging applications, such as bottles, cold drink cups, blister packages and flexible films [9].”
BackgroundJian, J., Xiangbin, Z., & Xianbo, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.001 · Cited by 625
Ferreira, F. V., Cividanes, L. S., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering & Science · doi:10.1002/pen.24770 · Cited by 443
PVAm–PIP/PS Composite Membrane with High Performance for CO2/N2 Separation
Qiao, Z., Wang, Z., Zhang, C., Yuan, S., Zhu, Y., Wang, J., & Wang, S. (2013) · AIChE Journal · doi:10.1002/aic.13781 · Cited by 398
Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender
Palsikowski, P. A., Kuchnier, C. N., Pinheiro, I. F., & Morales, A. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0951-3 · Cited by 247
Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0774-2 · Cited by 240
Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties
Su, S., Duhme, M., & Kopitzky, R. (2020) · Materials · doi:10.3390/ma13214897 · Cited by 159
Cited by
Eryildiz, M., Karakus, A., Demirci, M., Altintas Kadirhan, O., & Eksi Altan, M. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70133 · Cited by 25
Sooraj, V., Bhagavatula, S. G. K., & Kannan, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57087 · Cited by 16
Bharathan, S. P., Guthige, M. R., Kumar, S., Kumar, R., & George, J. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.153379 · Cited by 2
Metadata
- Authors
- Bianchi, M., Dorigato, A., Morreale, M., & Pegoretti, A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2023-02-10
- Volume
- 15
- Issue
- 4
- Pages
- 881
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4319965906
- Cited by
- 67
- References
- 16
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation of the Physical and Shape Memory Properties of Fully Biodegradable Poly(lactic acid) (PLA)/Poly(butylene adipate terephthalate) (PBAT) Blends. https://app.cochat.ai/papers/10.3390/polym15040881
- The paper
- Bianchi, M., Dorigato, A., Morreale, M., & Pegoretti, A. (2023). Evaluation of the Physical and Shape Memory Properties of Fully Biodegradable Poly(lactic acid) (PLA)/Poly(butylene adipate terephthalate) (PBAT) Blends. Polymers. https://doi.org/10.3390/polym15040881
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.