Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Extraction of cellulose and preparation of nanocellulose from sisal fibers
Morán, J. I., Alvarez, V. A., Cyras, V. P., & Vázquez, A. (2008) · Cellulose · doi:10.1007/s10570-007-9145-9 · Cited by 1,507 · cited 1×
“- Cellulose Crystallites Cotton Whatman filter paper H2SO4 hydrolysis [57] Nanocellulose Sisal fibers H2SO4 hydrolysis [58] - Cellulose Microcrystal Cotton Whatman filter paper HCl hydrolysis [59]”
MethodNishiyama, Y., Sugiyama, J., Chanzy, H., & Langan, P. (2003) · Journal of the American Chemical Society · doi:10.1021/ja037055w · Cited by 1,485
Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis
Bondeson, D., Mathew, A., & Oksman, K. (2006) · Cellulose · doi:10.1007/s10570-006-9061-4 · Cited by 1,372 · cited 3×
“, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
BackgroundMethodTransparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271 · cited 1×
“PLA coated with MFC [147].”
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259 · cited 1×
“A uniform dispersion of nanoparticles leads to a very large matrix-filler interfacial area, changing the molecular mobility, relaxation behavior and ensuing thermal and mechanical properties [91,92].”
BackgroundNative cellulose: A composite of two distinct crystalline forms
Atalla, R. H., & VanderHart, D. L. (1984) · Science · doi:10.1126/science.223.4633.283 · Cited by 1,196 · cited 4×
“Attala and VanderHart [30] proposed that most native celluloses are mixtures of cellulose Iα and Iβ, solving a long time problem in the scientific community.”
BackgroundInfluentialHenriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183 · cited 2×
“[82] treated cellulosic wood fiber pulps with pure C-type endoglucanase in order to facilitate the disintegration of MFC.”
MethodPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047 · cited 1×
“Each fiber is essentially a composite in which rigid cellulose microfibrils are embedded in a soft matrix mainly composed of lignin and hemicellulose [6,7].”
BackgroundEffect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose
DONG, X. M., REVOL, J.-F., & GRAY, D. G. (1998) · Cellulose · doi:10.1023/a:1009260511939 · Cited by 1,032 · cited 2×
“Above a critical concentration, the rod-like shape of the charged cellulose nanocrystals leads to the formation of an anisotropic liquid crystalline phase [63,64].”
BackgroundNatural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Rodlike cellulose microcrystals: Structure, properties and applications
de Souza Lima, M. M., & Borsali, R. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300268 · Cited by 894 · cited 5×
“, Iα and Iβ, the conformation of the polysaccharide chains is similar although the hydrogen-bonding pattern is different [33].”
BackgroundInfluentialExperimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883 · cited 3×
“The experimental strength was assessed to be of the order of 10 GPa [22].”
BackgroundEspert, A., Vilaplana, F., & Karlsson, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.04.004 · Cited by 876 · cited 1×
“which can be used for grafting specific groups and almost unlimited availability [22,96-100].”
Background(1983) · Cited by 824
Sugiyama, J., Vuong, R., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00014a033 · Cited by 791
Manufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783 · cited 7×
“CNW Cellulose nanowhiskers Ramie H2SO4 hydrolysis [36] MCC H2SO4 hydrolysis [37] MCC H2SO4 hydrolysis [38] Grass fiber H2SO4 hydrolysis [39] MCC LiCl:DMAc [40]”
BackgroundMethodInfluentialAraki, J., Wada, M., Kuga, S., & Okano, T. (1998) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00404-x · Cited by 769
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766 · cited 2×
“Transmission electron micrographs from diluted suspensions of hydrolyzed (a) tunicin [74], (b) ramie [36], (c) cotton [57], (d) sugar beet [73], (e) MCC [75], and (f) bacterial cellulose [43].”
BackgroundMethodElastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754 · cited 1×
“8 GPa for microfibrils produced by acid hydrolysis [81].”
BackgroundSteric stabilization of a cellulose microcrystal suspension by poly(ethylene glycol) grafting
Araki, J., Wada, M., & Kuga, S. (2001) · Langmuir · doi:10.1021/la001070m · Cited by 720 · cited 2×
“- Cellulose Crystallites Cotton Whatman filter paper H2SO4 hydrolysis [57] Nanocellulose Sisal fibers H2SO4 hydrolysis [58] - Cellulose Microcrystal Cotton Whatman filter paper HCl hydrolysis [59]”
MethodSatyanarayana, K. G., Guimarães, J. L., & Wypych, F. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.02.006 · Cited by 693 · cited 2×
“To avoid any possible misunderstanding, it is important to clarify that in our case, ̳natural fibers‘ are related to ̳plant fibers‘; also called ̳vegetable fibers‘, ̳lignocellulosic fibers‘, or ̳cellulosic fibers‘ [2].”
BackgroundLiquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683 · cited 1×
“[115].”
Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b809212e · Cited by 672 · cited 17×
“The surface chemical modification is a promising solution to obtain nanocomposites with a matrix of low polarity such as PCL or PLA.”
BackgroundMethodInfluentialSelf-citationBionanocomposites: A New Concept of Ecological, Bioinspired, and Functional Hybrid Materials
Darder, M., Aranda, P., & Ruiz‐Hitzky, E. (2007) · Advanced Materials · doi:10.1002/adma.200602328 · Cited by 671 · cited 1×
“, carbon nanotubes and nanoclay) also come under ―bionanocomposites‖ [40,95].”
BackgroundPlasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Self-citationBiocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties
Alemdar, A., & Sain, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.044 · Cited by 661 · cited 2×
“NF Nanofibers Wheat straw HCl + Mechanical Treatment [49]”
MethodA study of the effect of acetylation and propionylation surface treatments on natural fibres
Tserki, V., Zafeiropoulos, N. E., Simon, F., & Panayiotou, C. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.01.004 · Cited by 621 · cited 1×
“which can be used for grafting specific groups and almost unlimited availability [22,96-100].”
BackgroundSuryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617 · cited 3×
“The higher crystallinity of PLA-MFC [53] nanocomposites compared to neat PLA showed that MFC accelerated the crystallization of PLA.”
BackgroundMethodNakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608 · cited 2×
“[83] indirectly evaluated the degree of fibrillation of kraft pulp by water retention, measured as moisture content after centrifuging a 2 wt% fiber suspension of treated pulp slurry at 1,000 G for 15 min.”
BackgroundMethodCellulose fibrils for polymer reinforcement
Zimmermann, T., Pöhler, E., & Geiger, T. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200400097 · Cited by 598 · cited 21×
“%) for the PVA-nanocomposites, and up to a factor of 3 (fibril content 20 wt”
BackgroundMethodInfluentialStrength and barrier properties of MFC films
Syverud, K., & Stenius, P. (2009) · Cellulose · doi:10.1007/s10570-008-9244-2 · Cited by 592 · cited 1×
“The main reason for their use is due to the ease of processability, and their low cost and excellent barrier properties [145].”
BackgroundStructure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials
Petersson, L., Kvien, I., & Oksman, K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.012 · Cited by 576
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561 · cited 3×
“[71,102] adopted the technique of solvent casting using a synthetic latex obtained by the copolymerization between styrene (35 wt%) and butyl-acrylate (65 wt%) (poly(S-co-BuA)).”
BackgroundMethodSelf-citationNakagaito, A. N., & Yano, H. (2005) · Applied Physics A · doi:10.1007/s00339-003-2225-2 · Cited by 545 · cited 1×
“MFC can be viewed as a cellulosic material, composed of expanded high-volume cellulose, moderately degraded and greatly expanded in surface area, obtained by a homogenization process [80].”
BackgroundCombined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541 · cited 1×
“The current knowledge on the crystallography and biosynthesis of cellulose strongly suggests that the structure of cellulose is made up of parallel chains [25,26], whereas the crystalline structure of cellulose II is”
BackgroundSisal cellulose whiskers reinforced polyvinyl acetate nanocomposites
Garcia de Rodriguez, N. L., Thielemans, W., & Dufresne, A. (2006) · Cellulose · doi:10.1007/s10570-005-9039-7 · Cited by 534 · cited 20×
“%) for the PVA-nanocomposites, and up to a factor of 3 (fibril content 20 wt”
BackgroundInfluentialSelf-citationSurface modification of microfibrillated cellulose for epoxy composite applications
Lu, J., Askeland, P., & Drzal, L. T. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.028 · Cited by 492 · cited 2×
“nanocrystals and the second one is microfibrillated cellulose (MFC) [8,13,35].”
BackgroundPetersson, L., & Oksman, K. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.12.010 · Cited by 491 · cited 1×
“[148].”
Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites
Roohani, M., Habibi, Y., Belgacem, N. M., Ebrahim, G., Karimi, A. N., & Dufresne, A. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.05.024 · Cited by 484 · cited 19×
“%) for the PVA-nanocomposites, and up to a factor of 3 (fibril content 20 wt”
BackgroundInfluentialSelf-citationHelbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
Self-citationHeux, L., Chauve, G., & Bonini, C. (2000) · Langmuir · doi:10.1021/la9913957 · Cited by 467 · cited 2×
“Pellets were obtained by freezing-drying the aqueous suspension [116].”
BackgroundMethodNanocomposites of cellulose acetate butyrate reinforced with cellulose nanocrystals
Grunert, M., & Winter, W. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021065905986 · Cited by 465 · cited 5×
“reported for PVA reinforced with microfibrillated cellulose [52] and CAB reinforced with unmodified bacterial cellulose nanocrystals [43].”
BackgroundMethodInfluentialStable suspensions of partially silylated cellulose whiskers dispersed in organic solvents
Goussé, C., Chanzy, H., Excoffier, G., Soubeyrand, L., & Fleury, E. (2002) · Polymer · doi:10.1016/s0032-3861(02)00051-4 · Cited by 446 · cited 1×
“The modification of cellulose nanocrystals and MFC with organic compounds via reaction of the surface hydroxyl groups has been carried out with different grafting agents such as isocyanates [124], anhydrides [124], chlorosilanes [125,126] or silanes [23,43,125].”
MethodCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424 · cited 4×
“An additional hydrogen bond per glucose residue in cellulose II makes this allomorph the most thermodynamically stable form [28].”
BackgroundInfluentialPreparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials
Lu, J., Wang, T., & Drzal, L. T. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.02.003 · Cited by 414 · cited 7×
“reported for PVA reinforced with microfibrillated cellulose [52] and CAB reinforced with unmodified bacterial cellulose nanocrystals [43].”
BackgroundMethodInfluentialImprovement of starch film performances using cellulose microfibrils
Dufresne, A., & Vignon, M. R. (1998) · Macromolecules · doi:10.1021/ma971532b · Cited by 409 · cited 2×
“MFC isolated from kraft pulp [52,83], sulfite pulp [77], potato pulp [134], and sugar beet [135], were also studied as nanoreinforcement in different matrices such as PVA [52,77], HPC [77], potato starch plasticized with glycerol [134], and polyurethane (PU) [136,137].”
BackgroundSelf-citationMorandi, G., Heath, L., & Thielemans, W. (2009) · Langmuir · doi:10.1021/la900452a · Cited by 405 · cited 2×
“CNXL Cellulose Nanocrystals Cotton Whatman filter paper H2SO4 hydrolysis [41] [42] Bacterial cellulose H2SO4 hydrolysis [43] Cotton (cotton wool) H2SO4 hydrolysis [44] MCC H2SO4 hydrolysis [45] MCC Sonication [46] CNW-HCl Cellulose nanowhiskers Cotton linters HCl hydrolysis [47] Wh Whiskers Cellulose fibers H2SO4 hydr…”
MethodCellulose nanocrystals reinforced poly(oxyethylene)
Azizi Samir, M. A. S., Alloin, F., Sanchez, J.-Y., & Dufresne, A. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.094 · Cited by 398 · cited 5×
“The degree of crystallinity (c) for PEO nanocomposites reinforced with tunicin whiskers [140] was found to be quite constant up to 10 wt% of whisker content, but to decrease for higher whisker loading (e.”
BackgroundInfluentialSelf-citationTopochemistry of carboxylated cellulose nanocrystals resulting from TEMPO-mediated oxidation
Montanari, S., Roumani, M., Heux, L., & Vignon, M. R. (2005) · Macromolecules · doi:10.1021/ma048396c · Cited by 398 · cited 1×
“, twists and kinks [24].”
Ljungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé (2005) · Biomacromolecules · doi:10.1021/bm050222v · Cited by 395
Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm0101769 · Cited by 384 · cited 1×
“For tunicin whiskers/sorbitol plasticized starch nanocomposite [142], Tgs were found to increase slightly up to about 15 wt% whiskers and to decrease for higher whiskers loading.”
BackgroundSelf-citationModuli of Crystalline Polymers Employing Composite Theory
Halpin, J. C., & Kardos, J. L. (1972) · Journal of Applied Physics · doi:10.1063/1.1661482 · Cited by 375 · cited 2×
“The mean-field approach on which the Halpin-Kardos model [130] is based is classically used to predict the mechanical behavior of short-fibers composites and semi-crystalline polymers.”
BackgroundMethodChemical surface modifications of microfibrillated cellulose
Stenstad, P., Andresen, M., Tanem, B. S., & Stenius, P. (2008) · Cellulose · doi:10.1007/s10570-007-9143-y · Cited by 374 · cited 1×
“Actually, the chains of poly-β-(1→4)-D-glucosyl residues aggregate to form a fibril, which is a long thread-like bundle of molecules laterally stabilized by intermolecular hydrogen bonds [19-21], as shown in Figure 2.”
BackgroundProperties and characterization of hydrophobized microfibrillated cellulose
Andresen, M., Johansson, L.-S., Tanem, B. S., & Stenius, P. (2006) · Cellulose · doi:10.1007/s10570-006-9072-1 · Cited by 373 · cited 2×
“Actually, the chains of poly-β-(1→4)-D-glucosyl residues aggregate to form a fibril, which is a long thread-like bundle of molecules laterally stabilized by intermolecular hydrogen bonds [19-21], as shown in Figure 2.”
BackgroundNatural fibre-polymer composites
Satyanarayana, K. G., Sukumaran, K., Mukherjee, P. S., Pavithran, C., & Pillai, S. G. K. (1990) · Cement and Concrete Composites · doi:10.1016/0958-9465(90)90049-4 · Cited by 364 · cited 1×
“Each fiber is essentially a composite in which rigid cellulose microfibrils are embedded in a soft matrix mainly composed of lignin and hemicellulose [6,7].”
BackgroundKvien, I., Tanem, B. S., & Oksman, K. (2005) · Biomacromolecules · doi:10.1021/bm050479t · Cited by 355 · cited 11×
“Investigating the optimization process of microcrystalline cellulose (MCC) hydrolysis, a response surface methodology was used to evaluate the variation of the following parameters: concentration of MCC, sulfuric acid concentration, duration and temperature of hydrolysis, as well as duration of the sonication step.”
BackgroundInfluentialPoly(vinyl alcohol)/cellulose nanocrystal barrier membranes
Paralikar, S. A., Simonsen, J., & Lombardi, J. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.009 · Cited by 349
Physical properties of starch nanocrystal-reinforced pullulan films
KRISTO, E., & BILIADERIS, C. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.07.021 · Cited by 345 · cited 1×
“Despite the increasing number of papers reporting the use of starch nanocrystals in polymer nanocomposites to improve the barrier properties [66,149], limited use of cellulose nanocrystals for this purpose has been reported.”
BackgroundIsolation of nanofibers from soybean source and their reinforcing capability on synthetic polymers
Wang, B., & Sain, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.015 · Cited by 344 · cited 1×
“Nanofibers Soybean pods Chemical treatment + high pressure defibrilator [60]”
BackgroundPreparation of Cellulose Whiskers Reinforced Nanocomposites from an Organic Medium Suspension
Azizi Samir, M. A. S., Alloin, F., Sanchez, J.-Y., El Kissi, N., & Dufresne, A. (2004) · Macromolecules · doi:10.1021/ma030532a · Cited by 331 · cited 1×
“[119] prepared polymer nanocomposites reinforced with cellulose whiskers by dispersing the whisker suspensions in an organic solvent, N,N-dimethylformamide (DMF), without any surface chemical modification or coating surfactant.”
MethodSelf-citationCharacterization and factors effecting fiber properties
Rowell, R. M. (2000) · Medical Entomology and Zoology · Cited by 327
Application of equivalent model method to dynamic rheo‐optical properties of crystalline polymer
Takayanagi, M., Uemura, S., & Minami, S. (1964) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070050111 · Cited by 323 · cited 2×
“[131], the shear modulus of the composite can be written as:”
BackgroundMethodTangling Effect in Fibrillated Cellulose Reinforced Nanocomposites
Saïd Azizi Samir, M. A., Alloin, F., Paillet, M., & Dufresne, A. (2004) · Macromolecules · doi:10.1021/ma035939u · Cited by 313 · cited 2×
“Transmission electron micrographs from diluted suspensions of hydrolyzed (a) tunicin [74], (b) ramie [36], (c) cotton [57], (d) sugar beet [73], (e) MCC [75], and (f) bacterial cellulose [43].”
BackgroundSelf-citationChemistry: Fundamentals and Applications
Hameka, H. F. (2001) · Medical Entomology and Zoology · Cited by 312
Cellulose: Structure and Properties
Heinze, T. (2015) · Advances in Polymer Science · doi:10.1007/12_2015_319 · Cited by 300
Polymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
Surface silylation of cellulose microfibrils: preparation and rheological properties
Goussé, C., Chanzy, H., Cerrada, M. L., & Fleury, E. (2004) · Polymer · doi:10.1016/j.polymer.2003.12.028 · Cited by 292 · cited 1×
“The modification of cellulose nanocrystals and MFC with organic compounds via reaction of the surface hydroxyl groups has been carried out with different grafting agents such as isocyanates [124], anhydrides [124], chlorosilanes [125,126] or silanes [23,43,125].”
MethodNovel nanocomposites based on polyurethane and micro fibrillated cellulose
Özgür Seydibeyoğlu, M., & Oksman, K. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.08.008 · Cited by 290 · cited 2×
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
BackgroundNanocomposites of Chitin Whiskers from Riftia Tubes and Poly(caprolactone)
Morin, A., & Dufresne, A. (2002) · Macromolecules · doi:10.1021/ma011493a · Cited by 287 · cited 2×
“Tm values are reported to be nearly independent of the filler content in PCL/chitin whiskers nanocomposites [143] as well as in POE filled with tunicin whiskers [140].”
BackgroundSelf-citationDinand, E., Vignon, M., Chanzy, H., & Heux, L. (2002) · Cellulose · doi:10.1023/a:1015877021688 · Cited by 285 · cited 1×
“The current knowledge on the crystallography and biosynthesis of cellulose strongly suggests that the structure of cellulose is made up of parallel chains [25,26], whereas the crystalline structure of cellulose II is”
BackgroundGopalan Nair, K., Dufresne, A., Gandini, A., & Belgacem, M. N. (2003) · Biomacromolecules · doi:10.1021/bm030058g · Cited by 284 · cited 1×
“The modification of cellulose nanocrystals and MFC with organic compounds via reaction of the surface hydroxyl groups has been carried out with different grafting agents such as isocyanates [124], anhydrides [124], chlorosilanes [125,126] or silanes [23,43,125].”
MethodSelf-citationA technique for production of nanocrystalline cellulose with a narrow size distribution
Bai, W., Holbery, J., & Li, K. (2009) · Cellulose · doi:10.1007/s10570-009-9277-1 · Cited by 283 · cited 1×
“NCC Nanocrystalline cellulose MCC H2SO4 hydrolysis [50]”
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280 · cited 1×
“[138].”
Preparation of homogeneous dispersions of tunicate cellulose whiskers in organic solvents
van den Berg, O., Capadona, J. R., & Weder, C. (2007) · Biomacromolecules · doi:10.1021/bm061104q · Cited by 278 · cited 3×
“(a) In water (as it was prepared); or freeze-dried and re-dispersed in (b) water; (c) DMF; (d) DMSO; (e) N-methyl pyrrolidone; (f) formic acid, and (g) m-cresol [122].”
BackgroundInfluentialNanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers
Ljungberg, N., Cavaillé, J.-Y., & Heux, L. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.013 · Cited by 272 · cited 1×
“A similar study was performed using the same surfactant to prepare nanocomposites with isotactic polypropylene [118].”
MethodNanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271 · cited 3×
“Concerning the last case, two routes can be envisaged in order to obtain non-flocculated dispersions of cellulose nanocrystals in an appropriated organic medium [87]:”
BackgroundAn ecotoxicological characterization of nanocrystalline cellulose (NCC)
Kovacs, T., Naish, V., O'Connor, B., Blaise, C., Gagné, F., Hall, L., Trudeau, V., & Martel, P. (2010) · Nanotoxicology · doi:10.3109/17435391003628713 · Cited by 269 · cited 1×
“Other recent works have been published in Canada regarding the toxicity of cellulose nanocrystals and first results are positive [93].”
BackgroundA high strength nanocomposite based on microcrystalline cellulose and polyurethane
Wu, Q., Henriksson, M., Liu, X., & Berglund, L. A. (2007) · Biomacromolecules · doi:10.1021/bm701061t · Cited by 265 · cited 3×
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
BackgroundHirai, A., Inui, O., Horii, F., & Tsuji, M. (2009) · Langmuir · doi:10.1021/la802947m · Cited by 264 · cited 1×
“, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
BackgroundPolysaccharide Microcrystals Reinforced Amorphous Poly(β-hydroxyoctanoate) Nanocomposite Materials
Dubief, D., Samain, E., & Dufresne, A. (1999) · Macromolecules · doi:10.1021/ma990274a · Cited by 259 · cited 2×
“The strong reinforcing effect of the whiskers is generally attributed to the formation of a percolating network structure above the percolation threshold resulting from hydrogen bonding between nanoparticles [107].”
BackgroundSelf-citationWater‐in‐oil Emulsions Stabilized by Hydrophobized Microfibrillated Cellulose
Andresen, M., & Stenius, P. (2007) · Journal of Dispersion Science and Technology · doi:10.1080/01932690701341827 · Cited by 238 · cited 2×
“MFC Microfibrillated Cellulose Pulp Gaulin Homogenizer [51] Pulp Daicel [52] Pulp Daicel [53]”
MethodSono-chemical preparation of cellulose nanocrystals from lignocellulose derived materials
FILSON, P., & DAWSONANDOH, B. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.09.062 · Cited by 237 · cited 2×
“CNXL Cellulose Nanocrystals Cotton Whatman filter paper H2SO4 hydrolysis [41] [42] Bacterial cellulose H2SO4 hydrolysis [43] Cotton (cotton wool) H2SO4 hydrolysis [44] MCC H2SO4 hydrolysis [45] MCC Sonication [46] CNW-HCl Cellulose nanowhiskers Cotton linters HCl hydrolysis [47] Wh Whiskers Cellulose fibers H2SO4 hydr…”
MethodTranscrystallization in Mcl-PHAs/Cellulose Whiskers Composites
Dufresne, A., Kellerhals, M. B., & Witholt, B. (1999) · Macromolecules · doi:10.1021/ma990564r · Cited by 236 · cited 1×
“Afterwards, many research studies were done in order to process nanocomposites by using matrices such as poly (β-hydroxyoctanoate) (PHO) [107,108], polyvinylchloride (PVC) [109-112], waterborne epoxy [113], natural rubber [10], and polyvinyl acetate (PVAc) [72].”
BackgroundSelf-citationSugar beet cellulose nanofibril-reinforced composites
Leitner, J., Hinterstoisser, B., Wastyn, M., Keckes, J., & Gindl, W. (2007) · Cellulose · doi:10.1007/s10570-007-9131-2 · Cited by 231 · cited 1×
“MFC isolated from kraft pulp [52,83], sulfite pulp [77], potato pulp [134], and sugar beet [135], were also studied as nanoreinforcement in different matrices such as PVA [52,77], HPC [77], potato starch plasticized with glycerol [134], and polyurethane (PU) [136,137].”
BackgroundDufresne, A. (2006) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2006.906 · Cited by 231 · cited 1×
“Dufresne [133] explained that the good agreement observed between”
BackgroundSelf-citationDispersion of cellulose nanocrystals in polar organic solvents
Viet, D., Beck-Candanedo, S., & Gray, D. G. (2007) · Cellulose · doi:10.1007/s10570-006-9093-9 · Cited by 224 · cited 1×
“[121] studied the dispersion of cotton nanocrystals in dipolar aprotic solvents by sonication only.”
Green composites reinforced with hemp nanocrystals in plasticized starch
Cao, X., Chen, Y., Chang, P. R., Stumborg, M., & Huneault, M. A. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28418 · Cited by 221 · cited 1×
“, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
BackgroundViscoelastic properties of plasticized PVC reinforced with cellulose whiskers
Chazeau, L., Cavaill�, J. Y., Canova, G., Dendievel, R., & Boutherin, B. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990314)71:11<1797::aid-app9>3.0.co;2-e · Cited by 221 · cited 1×
“Afterwards, many research studies were done in order to process nanocomposites by using matrices such as poly (β-hydroxyoctanoate) (PHO) [107,108], polyvinylchloride (PVC) [109-112], waterborne epoxy [113], natural rubber [10], and polyvinyl acetate (PVAc) [72].”
BackgroundReduced water vapour sorption in cellulose nanocomposites with starch matrix
Svagan, A. J., Hedenqvist, M. S., & Berglund, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.016 · Cited by 212
Lin, N., Chen, G., Huang, J., Dufresne, A., & Chang, P. R. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30308 · Cited by 202 · cited 15×
“The surface chemical modification is a promising solution to obtain nanocomposites with a matrix of low polarity such as PCL or PLA.”
BackgroundMethodInfluentialSelf-citationBiocomposites of plasticized starch reinforced with cellulose crystallites from cottonseed linter
Lu, Y., Weng, L., & Cao, X. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500094 · Cited by 200 · cited 1×
“For glycerol plasticized starch nanocomposite reinforced with cellulose crystallites prepared from cottonseed linter [141], an increase of Tg with filler content was reported and attributed to cellulose/starch interactions.”
MethodElectrospun nanocomposites from polystyrene loaded with cellulose nanowhiskers
Rojas, O. J., Montero, G. A., & Habibi, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30011 · Cited by 198
Battista, O. A., & Smith, P. A. (1962) · Industrial & Engineering Chemistry · doi:10.1021/ie50633a003 · Cited by 198
Dalmas, F., Cavaillé, J.-Y., Gauthier, C., Chazeau, L., & Dendievel, R. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.01.030 · Cited by 197 · cited 1×
“studied for only about the past 20 years [89].”
BackgroundGas-phase surface esterification of cellulose microfibrils and whiskers
Berlioz, S., Molina-Boisseau, S., Nishiyama, Y., & Heux, L. (2009) · Biomacromolecules · doi:10.1021/bm900319k · Cited by 193 · cited 1×
“[129] developed a solvent-free method to modify the surface of cellulose nanocrystals and MFC through esterification with palmitoyl chloride.”
MethodLönnberg, H., Fogelström, L., Berglund, L., Malmström, E., & Hult, A. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.06.023 · Cited by 193 · cited 1×
“[128] modified the surface of MFC extracted from wood pulp by grafting poly(ε-caprolactone) via ring-opening polymerization.”
MethodDufresne, A., Cavaillé, J., & Helbert, W. (1997) · Polymer Composites · doi:10.1002/pc.10274 · Cited by 189 · cited 3×
“[103] reported that a poly(S-co-BuA) latex film containing 30 wt% of wheat straw cellulose whiskers presented a rubbery Young‘s modulus value more than 1000-times higher than that of the bulk matrix.”
BackgroundMethodSelf-citationJohnson, R. K., Zink-Sharp, A., Renneckar, S. H., & Glasser, W. G. (2009) · Cellulose · doi:10.1007/s10570-008-9269-6 · Cited by 178 · cited 4×
“%) for HPC nanocomposites compared to the neat matrix.”
BackgroundInfluentialOrientation of cellulose nanowhiskers in polyvinyl alcohol
Kvien, I., & Oksman, K. (2007) · Applied Physics A · doi:10.1007/s00339-007-3882-3 · Cited by 176 · cited 17×
“%) for the PVA-nanocomposites, and up to a factor of 3 (fibril content 20 wt”
BackgroundMethodInfluentialCross-Linked Nanocomposite Polymer Electrolytes Reinforced with Cellulose Whiskers
Azizi Samir, M. A. S., Alloin, F., Sanchez, J.-Y., & Dufresne, A. (2004) · Macromolecules · doi:10.1021/ma049504y · Cited by 166 · cited 1×
“[120] used the same procedure to prepare nanocomposites by dispersing cellulose tunicin whiskers suspension in DMF in a solution of a linear unsaturated polycondensate.”
MethodSelf-citationStructural aspects in ultrathin cellulose microfibrils followed by 13C CP-MAS NMR
Heux, L., Dinand, E., & Vignon, M. R. (1999) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00051-x · Cited by 166 · cited 1×
“biosynthesized by a number of living organisms ranging from higher to lower plants, some amoebae, sea animals, bacteria and fungi [14].”
BackgroundBendahou, A., Habibi, Y., Kaddami, H., & Dufresne, A. (2009) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2009.1011 · Cited by 165 · cited 4×
“The number in the codification of the sample corresponds to the whiskers content (wt%) [10].”
BackgroundMethodInfluentialSelf-citationCellulose/DNA Hybrid Nanomaterials
Mangalam, A. P., Simonsen, J., & Benight, A. S. (2009) · Biomacromolecules · doi:10.1021/bm800925x · Cited by 161 · cited 1×
“CNXL Cellulose Nanocrystals Cotton Whatman filter paper H2SO4 hydrolysis [41] [42] Bacterial cellulose H2SO4 hydrolysis [43] Cotton (cotton wool) H2SO4 hydrolysis [44] MCC H2SO4 hydrolysis [45] MCC Sonication [46] CNW-HCl Cellulose nanowhiskers Cotton linters HCl hydrolysis [47] Wh Whiskers Cellulose fibers H2SO4 hydr…”
MethodTransformation of Valonia cellulose crystals by an alkaline hydrothermal treatment
Sugiyama, J., Okano, T., Yamamoto, H., & Horii, F. (1990) · Macromolecules · doi:10.1021/ma00214a029 · Cited by 159 · cited 1×
“It was discovered that the structural forms Iα and Iβ can be found not only within the same cellulose sample [31], but also along a given microfibril [32].”
BackgroundA Small-Angle Scattering Study of Cellulose Whiskers in Aqueous Suspensions
Térech, P., Chazeau, L., & Cavaillé, J. Y. (1999) · Macromolecules · doi:10.1021/ma9810621 · Cited by 151 · cited 1×
“Afterwards, many research studies were done in order to process nanocomposites by using matrices such as poly (β-hydroxyoctanoate) (PHO) [107,108], polyvinylchloride (PVC) [109-112], waterborne epoxy [113], natural rubber [10], and polyvinyl acetate (PVAc) [72].”
BackgroundNatural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A. K., Misra, M., Drzal, L. T., et al. (2005) · doi:10.1201/9780203508206-9 · Cited by 138
Rodlike cellulose whiskers coated with surfactant: A small-angle neutron scattering characterization
Bonini, C., Heux, L., Cavaillé, J.-Y., Lindner, P., Dewhurst, C., & Terech, P. (2002) · Langmuir · doi:10.1021/la015511t · Cited by 138 · cited 3×
“, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
BackgroundMethodSurface esterification of cellulose fibers: Characterization by DRIFT and contact angle measurements
Pasquini, D., Belgacem, M. N., Gandini, A., & Curvelo, A. A. D. S. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.07.074 · Cited by 134 · cited 1×
“which can be used for grafting specific groups and almost unlimited availability [22,96-100].”
BackgroundLy, B., Thielemans, W., Dufresne, A., Chaussy, D., & Belgacem, M. N. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.07.018 · Cited by 129 · cited 1×
“Moreover, it can improve the compatibility between the whiskers and the host matrix as already proven in the studies of fiber-based composites [123].”
BackgroundSelf-citationComposites based on jute fibers and phenolic matrices: Properties of fibers and composites
Razera, I. A. T., & Frollini, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13224 · Cited by 129 · cited 1×
“9 1 — [11,12] 60 22.”
New waterborne epoxy coatings based on cellulose nanofillers
Ruiz, M. M., Cavaillé, J. Y., Dufresne, A., Graillat, C., & G�rard, J.-F. (2001) · Macromolecular Symposia · doi:10.1002/1521-3900(200105)169:1<211::aid-masy211>3.0.co;2-h · Cited by 119 · cited 1×
“Afterwards, many research studies were done in order to process nanocomposites by using matrices such as poly (β-hydroxyoctanoate) (PHO) [107,108], polyvinylchloride (PVC) [109-112], waterborne epoxy [113], natural rubber [10], and polyvinyl acetate (PVAc) [72].”
BackgroundSelf-citationCellulose-Based Composites and Nanocomposites
Dufresne, A. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00019-3 · Cited by 119
Self-citationCrystallization of tethered polyethylene in confined geometries
Weimann, P. A., Hajduk, D. A., Chu, C., Chaffin, K. A., Brodil, J. C., & Bates, F. S. (1999) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19990815)37:16<2151::aid-polb17>3.0.co;2-v · Cited by 114 · cited 1×
“Afterwards, many research studies were done in order to process nanocomposites by using matrices such as poly (β-hydroxyoctanoate) (PHO) [107,108], polyvinylchloride (PVC) [109-112], waterborne epoxy [113], natural rubber [10], and polyvinyl acetate (PVAc) [72].”
BackgroundCellulose-Based Composites and Nanocomposites
Dufresne, A. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00008-2 · Cited by 113 · cited 4×
“composition, internal fiber structure, microfibril angle, cell dimensions and defects, which differ from different parts of a plant as well as from different plants [8].”
BackgroundMethodInfluentialSelf-citationElastic, viscoelastic and plastic behavior of multiphase polymer blends
(1991) · HAL · Cited by 110
Starch Nanocrystal Fillers in an Acrylic Polymer Matrix
Angellier, H., Putaux, J., Molina‐Boisseau, S., Dupeyre, D., & Dufresne, A. (2005) · Macromolecular Symposia · doi:10.1002/masy.200550310 · Cited by 106
Self-citationPermselective nanostructured membranes based on cellulose nanowhiskers
Thielemans, W., Warbey, C. R., & Walsh, D. A. (2009) · Green Chemistry · doi:10.1039/b818056c · Cited by 100 · cited 3×
“, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
BackgroundAssessing the combined benefits of clay and nanofibrillated cellulose in layered TMP-based sheets
Mörseburg, K., & Chinga‐Carrasco, G. (2009) · Cellulose · doi:10.1007/s10570-009-9290-4 · Cited by 95 · cited 3×
“NFC Nanofibrillated cellulose Cellulose nanofibrils Sulfite pulp Mechanical [54,55]”
BackgroundWater transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan
Saxena, A., & Ragauskas, A. J. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.03.039 · Cited by 91 · cited 1×
“In another study, the effect of soft wood cellulose whiskers on water vapor barrier properties of xylan/sorbitol films has been reported [150].”
BackgroundNanocompósitos de matriz polimérica: estratégias de síntese de materiais híbridos
Esteves, A. C. C., Barros-Timmons, A. M., & Trindade, T. (2004) · Química Nova · doi:10.1590/s0100-40422004000500020 · Cited by 87
Handbook of Engineering Biopolymers
Fakirov, S., & Bhattacharyya, D. (2007) · doi:10.3139/9783446442504 · Cited by 86
Petersson, L., Mathew, A. P., & Oksman, K. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29661 · Cited by 85 · cited 1×
“For CAB nanocomposites [144] reinforced with 5 wt% cellulose whiskers from MCC, it was reported that the tan δ peak of the matrix was affected by the presence of the cellulosic filler.”
BackgroundBraun, B., Dorgan, J. R., & Chandler, J. P. (2008) · Biomacromolecules · doi:10.1021/bm7013137 · Cited by 83 · cited 1×
“CNXL Cellulose Nanocrystals Cotton Whatman filter paper H2SO4 hydrolysis [41] [42] Bacterial cellulose H2SO4 hydrolysis [43] Cotton (cotton wool) H2SO4 hydrolysis [44] MCC H2SO4 hydrolysis [45] MCC Sonication [46] CNW-HCl Cellulose nanowhiskers Cotton linters HCl hydrolysis [47] Wh Whiskers Cellulose fibers H2SO4 hydr…”
MethodChazeau, L., Cavaillé, J. Y., & Térech, P. (1999) · Polymer · doi:10.1016/s0032-3861(98)00748-4 · Cited by 77 · cited 1×
“Afterwards, many research studies were done in order to process nanocomposites by using matrices such as poly (β-hydroxyoctanoate) (PHO) [107,108], polyvinylchloride (PVC) [109-112], waterborne epoxy [113], natural rubber [10], and polyvinyl acetate (PVAc) [72].”
BackgroundChinga‐Carrasco, G., & Syverud, K. (2009) · Journal of Nanoparticle Research · doi:10.1007/s11051-009-9710-2 · Cited by 56 · cited 3×
“NFC Nanofibrillated cellulose Cellulose nanofibrils Sulfite pulp Mechanical [54,55]”
BackgroundGandini, A., & Belgacem, M. N. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00001-6 · Cited by 45
On the polarity of cellulose in the cell wall of Valonia
Sugiyama, J., Chanzy, H., & Revol, J. (1994) · Planta · doi:10.1007/bf00192539 · Cited by 43 · cited 1×
“, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
BackgroundCharacterization of Natural Fibers
Satyanarayana, K. G., & Wypych, F. (2007) · doi:10.3139/9783446442504.001 · Cited by 39 · cited 1×
“5 [2,9] 54.”
Belgacem, M. N., & Gandini, A. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00020-x · Cited by 34
Pandey, J. K., Kim, C.-S., Chu, W., et al. (2009) · e-Polymers · doi:10.1515/epoly.2009.9.1.1221 · Cited by 26 · cited 1×
“CNW Cellulose nanowhiskers Ramie H2SO4 hydrolysis [36] MCC H2SO4 hydrolysis [37] MCC H2SO4 hydrolysis [38] Grass fiber H2SO4 hydrolysis [39] MCC LiCl:DMAc [40]”
MethodFavier, V., Cavaillé, J. Y., & Canova, G. R. (1995) · Cited by 6
Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils
Dufresne, A., Cavaill�, J.-Y., & Vignon, M. R. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970509)64:6 · cited 1×
“Actually, the chains of poly-β-(1→4)-D-glucosyl residues aggregate to form a fibril, which is a long thread-like bundle of molecules laterally stabilized by intermolecular hydrogen bonds [19-21], as shown in Figure 2.”
BackgroundSelf-citationExperimental Determination of Elastic Moduli of the Crystalline Regions in Oriented Polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Kobunshi Kagaku · doi:10.1295/koron1944.19.292
(1983) · Medical Entomology and Zoology
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Self-citationProduction of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications
Brinchi, L., Cotana, F., Fortunati, E., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.033 · Cited by 1,121
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Recent progress in cellulose nanocrystals: sources and production
Trache, D., Hussin, M. H., Haafiz, M. K. M., & Thakur, V. K. (2017) · Nanoscale · doi:10.1039/c6nr09494e · Cited by 1,064
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.