Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Self-citationProduction of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications
Brinchi, L., Cotana, F., Fortunati, E., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.033 · Cited by 1,121
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Recent progress in cellulose nanocrystals: sources and production
Trache, D., Hussin, M. H., Haafiz, M. K. M., & Thakur, V. K. (2017) · Nanoscale · doi:10.1039/c6nr09494e · Cited by 1,064
Nanocellulose: Extraction and application
Phanthong, P., Reubroycharoen, P., Hao, X., Xu, G., Abudula, A., & Guan, G. (2018) · Carbon Resources Conversion · doi:10.1016/j.crcon.2018.05.004 · Cited by 1,028
Current characterization methods for cellulose nanomaterials
Foster, E. J., Moon, R. J., Agarwal, U. P., Bortner, M. J., Bras, J., Camarero-Espinosa, S., Chan, K. J., Clift, M. J. D., Cranston, E. D., Eichhorn, S. J., et al. (2018) · Chemical Society Reviews · doi:10.1039/c6cs00895j · Cited by 1,021
Self-citationElfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101271 · Cited by 1,034
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Xu, X., Liu, F., Jiang, L., Zhu, J. Y., Haagenson, D., & Wiesenborn, D. P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302624t · Cited by 1,002
Klemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Jonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., & Davoodi, R. (2015) · Cellulose · doi:10.1007/s10570-015-0551-0 · Cited by 847
“The second dissimilarity is related to their morphology, as CNFs consist of a long web-like structure compared to the short rod-like shape of CNCs (Siqueira et al. 2010a).”
BackgroundSelf-citationCellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment
Etale, A., Onyianta, A. J., Turner, S. R., & Eichhorn, S. J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00477 · Cited by 817
Microcrystalline cellulose: Isolation, characterization and bio-composites application—A review
Trache, D., Hussin, M. H., Hui Chuin, C. T., Sabar, S., Fazita, M. R. N., Taiwo, O. F. A., Hassan, T. M., & Haafiz, M. K. M. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.09.056 · Cited by 814
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Cellulose Aerogels: Synthesis, Applications, and Prospects
Long, L.-Y., Weng, Y.-X., & Wang, Y.-Z. (2018) · Polymers · doi:10.3390/polym10060623 · Cited by 568
“The performance characteristics of cellulose, such as its molecular chain length (degree of polymerization, DP), size, degree of crystallinity, and thermal stability [47,48], are determined by the species of plant from which it is derived, as well as the extraction processes used in its production, including the pretr…”
BackgroundH.P.S, A. K., Saurabh, C. K., A.S., A., Nurul Fazita, M. R., Syakir, M. I., Davoudpour, Y., Rafatullah, M., Abdullah, C. K., M. Haafiz, M. K., & Dungani, R. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.028 · Cited by 542
Benchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production
Reid, M. S., Villalobos, M., & Cranston, E. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b03765 · Cited by 518
Ng, H.-M., Sin, L. T., Tee, T.-T., Bee, S.-T., Hui, D., Low, C.-Y., & Rahmat, A. R. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.01.008 · Cited by 513
“Smart” Materials Based on Cellulose: A Review of the Preparations, Properties, and Applications
Qiu, X., & Hu, S. (2013) · Materials · doi:10.3390/ma6030738 · Cited by 509
The Potential of Cellulose Nanocrystals in Tissue Engineering Strategies
Domingues, R. M. A., Gomes, M. E., & Reis, R. L. (2014) · Biomacromolecules · doi:10.1021/bm500524s · Cited by 509
Advances in cellulose nanomaterials
Kargarzadeh, H., Mariano, M., Gopakumar, D., Ahmad, I., Thomas, S., Dufresne, A., Huang, J., & Lin, N. (2018) · Cellulose · doi:10.1007/s10570-018-1723-5 · Cited by 508
“CNCs and CNFs are sensitive to moisture, are hydrophilic, and exhibit low thermal stability (Siqueira et al. 2010).”
BackgroundSelf-citationSurface and Interface Engineering for Nanocellulosic Advanced Materials
Yang, X., Biswas, S. K., Han, J., Tanpichai, S., Li, M., Chen, C., Zhu, S., Das, A. K., & Yano, H. (2021) · Advanced Materials · doi:10.1002/adma.202002264 · Cited by 497
Drying cellulose nanofibrils: in search of a suitable method
Peng, Y., Gardner, D. J., & Han, Y. (2012) · Cellulose · doi:10.1007/s10570-011-9630-z · Cited by 469
“…of cellulose nanofibrils (CNFs) and their application as a reinforcing component in polymer composites has received considerable attention (Beecher 2007; Hubbe et al. 2008; Siro and Plackett 2010; Habibi et al. 2010; Eichhorn et al. 2010; Siqueira et al. 2010; Klemm et al. 2011; Moon et al. 2011).”
BackgroundFerreira, F. V., Cividanes, L. S., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering & Science · doi:10.1002/pen.24770 · Cited by 443
Zeng, J.-B., He, Y.-S., Li, S.-L., & Wang, Y.-Z. (2012) · Biomacromolecules · doi:10.1021/bm201564a · Cited by 423
A review of nanocellulose as a new material towards environmental sustainability
Dhali, K., Ghasemlou, M., Daver, F., Cass, P., & Adhikari, B. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145871 · Cited by 417
Nanocellulose in Sensing and Biosensing
Golmohammadi, H., Morales-Narváez, E., Naghdi, T., & Merkoçi, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01170 · Cited by 402
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Functional Materials from Cellulose‐Derived Liquid‐Crystal Templates
Giese, M., Blusch, L. K., Khan, M. K., & MacLachlan, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201407141 · Cited by 393
Encapsulation of active ingredients in polysaccharide–protein complex coacervates
Devi, N., Sarmah, M., Khatun, B., & Maji, T. K. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.05.009 · Cited by 392
Materials chemistry and the futurist eco-friendly applications of nanocellulose: Status and prospect
Mishra, R. K., Sabu, A., & Tiwari, S. K. (2018) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2018.02.005 · Cited by 382
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
Peng, Y., Gardner, D. J., Han, Y., Kiziltas, A., Cai, Z., & Tshabalala, M. A. (2013) · Cellulose · doi:10.1007/s10570-013-0019-z · Cited by 376
“Nanocellulose, as a new generation of nano-scale material from forest products, has received considerable attention (Wegner and Jones 2006; Eichhorn et al. 2010; Habibi et al. 2010; Siqueira et al. 2010; Moon et al. 2011; Klemm et al. 2011).”
BackgroundShankar, S., & Rhim, J.-W. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.082 · Cited by 371
Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment
Tibolla, H., Pelissari, F. M., & Menegalli, F. C. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2014.04.011 · Cited by 358
Collazo-Bigliardi, S., Ortega-Toro, R., & Chiralt Boix, A. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.022 · Cited by 346
Characterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose
Reddy, J. P., & Rhim, J.-W. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.056 · Cited by 341
“the crystalline nanocellulose with high aspect ratio (2–120 nm in diameter and 100-nm in length) and very high elastic modulus (130–250 GPa), which may induce a strong interfacial interaction through hydrogen or ionic bonds between the CNC and the polymer matrix (Siqueira et al., 2010).”
BackgroundScaling up difficulties and commercial aspects of edible films for food packaging: A review
Jeya Jeevahan, J., Chandrasekaran, M., Venkatesan, S. P., Sriram, V., Britto Joseph, G., Mageshwaran, G., & Durairaj, R. B. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.04.014 · Cited by 334
A critical review on cellulose: From fundamental to an approach on sensor technology
Ummartyotin, S., & Manuspiya, H. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.050 · Cited by 327
Nanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
Bacterial Cellulose from Simple and Low Cost Production Media by Gluconacetobacter xylinus
Vazquez, A., Foresti, M. L., Cerrutti, P., & Galvagno, M. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0541-3 · Cited by 318
Abdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Recent advances in nanocellulose processing, functionalization and applications: a review
Thakur, V., Guleria, A., Kumar, S., Sharma, S., & Singh, K. (2021) · Materials Advances · doi:10.1039/d1ma00049g · Cited by 302
Toxicity of Cellulose Nanocrystals: A Review
Roman, M. (2015) · Industrial Biotechnology · doi:10.1089/ind.2014.0024 · Cited by 305
“10,11 Current studies of CNC toxicity have focused on plant fiber-derived CNCs, which are shorter and have smaller cross-sectional dimensions than those derived from animal, bacterial, or algal cellulose.”
Chakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
“Those reviews place the entire emphasis on the preparation and properties of cellulosic bio-nanocomposites [9], achieved mechanical properties [10], the comparison of mechanical reinforcement with the type and content of nanocellulose [11], and the processing of nanocellulosic composites [12–14].”
BackgroundRamesh, M., Deepa, C., Kumar, L. R., Sanjay, M., & Siengchin, S. (2022) · Journal of Industrial Textiles · doi:10.1177/1528083720924730 · Cited by 299
Oun, A. A., & Rhim, J.-W. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.073 · Cited by 294
The Development of Chiral Nematic Mesoporous Materials
Kelly, J. A., Giese, M., Shopsowitz, K. E., Hamad, W. Y., & MacLachlan, M. J. (2014) · Accounts of Chemical Research · doi:10.1021/ar400243m · Cited by 293
Mignon, A., De Belie, N., Dubruel, P., & Van Vlierberghe, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.04.054 · Cited by 289
Thomas, M. G., Abraham, E., Jyotishkumar, P., Maria, H. J., Pothen, L. A., & Thomas, S. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.08.053 · Cited by 291
Johansson, C., Bras, J., Mondragon, I., Nechita, P., Plackett, D., Šimon, P., Gregor Svetec, D., Virtanen, S., Giacinti Baschetti, M., Breen, C., et al. (2012) · BioResources · doi:10.15376/biores.7.2.2506-2552 · Cited by 327
Self-citationBiopolymer Composites With High Dielectric Performance: Interface Engineering
Deshmukh, K., Basheer Ahamed, M., Deshmukh, R. R., Khadheer Pasha, S. K., Bhagat, P. R., & Chidambaram, K. (2017) · Biopolymer Composites in Electronics · doi:10.1016/b978-0-12-809261-3.00003-6 · Cited by 289
Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review
Ahankari, S., Paliwal, P., Subhedar, A., & Kargarzadeh, H. (2021) · ACS Nano · doi:10.1021/acsnano.0c09678 · Cited by 281
Abitbol, T., Kloser, E., & Gray, D. G. (2013) · Cellulose · doi:10.1007/s10570-013-9871-0 · Cited by 280
“The recent interest (Eichhorn 2011; Eichhorn et al. 2010; Habibi et al. 2010; Holt et al. 2010; Klemm et al. 2011; Samir et al. 2005; Siqueira et al. 2010) and commercialization of CNCs warrants comprehensive characterization, including sulfur content and a reliable approach to its determination.”
BackgroundDynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Self-citationHuang, S., Xiong, Y., Zou, Y., Dong, Q., Ding, F., Liu, X., & Li, H. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.12.009 · Cited by 282
Enhancement of the fermentation process and properties of bacterial cellulose: a review
Campano, C., Balea, A., Blanco, A., & Negro, C. (2016) · Cellulose · doi:10.1007/s10570-015-0802-0 · Cited by 279
Starch nanoparticles formation via high power ultrasonication
Bel Haaj, S., Magnin, A., Pétrier, C., & Boufi, S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.022 · Cited by 273
Nanocellulose-Based Nanocomposites for Sustainable Applications: A Review
Norizan, M. N., Shazleen, S. S., Alias, A. H., Sabaruddin, F. A., Asyraf, M. R. M., Zainudin, E. S., Abdullah, N., Samsudin, M. S., Kamarudin, S. H., & Norrrahim, M. N. F. (2022) · Nanomaterials · doi:10.3390/nano12193483 · Cited by 271
Supramolecular Structure Characterization of Molecularly Thin Cellulose I Nanoparticles
Li, Q., & Renneckar, S. (2011) · Biomacromolecules · doi:10.1021/bm101315y · Cited by 267
Tingaut, P., Zimmermann, T., & Sèbe, G. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32956e · Cited by 266
Overview of Cellulose Nanomaterials, Their Capabilities and Applications
Moon, R. J., Schueneman, G. T., & Simonsen, J. (2016) · JOM · doi:10.1007/s11837-016-2018-7 · Cited by 263
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Xue, Y., Mou, Z., & Xiao, H. (2017) · Nanoscale · doi:10.1039/c7nr04994c · Cited by 251
Influence of nanofillers on biodegradable composites: A comprehensive review
Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S. (2021) · Polymer Composites · doi:10.1002/pc.26291 · Cited by 251
Abdul Khalil, H. P. S., Tye, Y. Y., Saurabh, C. K., Leh, C. P., Lai, T. K., Chong, E. W. N., Nurul Fazita, M. R., Mohd Hafiidz, J., Banerjee, A., & Syakir, M. I. (2017) · Express Polymer Letters · doi:10.3144/expresspolymlett.2017.26 · Cited by 251
McKee, J. R., Appel, E. A., Seitsonen, J., Kontturi, E., Scherman, O. A., & Ikkala, O. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303699 · Cited by 248
Development, processing and applications of bio-sourced cellulose nanocrystal composites
Calvino, C., Macke, N., Kato, R., & Rowan, S. J. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101221 · Cited by 245
Sèbe, G., Ham-Pichavant, F., Ibarboure, E., Koffi, A. L. C., & Tingaut, P. (2012) · Biomacromolecules · doi:10.1021/bm201777j · Cited by 240
Charreau, H., L. Foresti, M., & Vazquez, A. (2013) · Recent Patents on Nanotechnology · doi:10.2174/187221013804484854 · Cited by 238
Barhoum, A., Jeevanandam, J., Rastogi, A., Samyn, P., Boluk, Y., Dufresne, A., Danquah, M. K., & Bechelany, M. (2020) · Nanoscale · doi:10.1039/d0nr04795c · Cited by 234
Self-citationEnvironment friendly green composites based on soy protein isolate – A review
Koshy, R. R., Mary, S. K., Thomas, S., & Pothan, L. A. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.04.023 · Cited by 235
Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials
Oun, A. A., Shankar, S., & Rhim, J.-W. (2020) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2018.1536966 · Cited by 232
“There are six polymorphs of cellulose, i.e., cellulose I, II, IIII, IIIII, IVI, and IVII, which can be converted from one to another by chemical or thermal treatments as shown in Fig.”
BackgroundInfluentialPinheiro, I. F., Ferreira, F. V., Souza, D. H. S., Gouveia, R. F., Lona, L. M. F., Morales, A. R., & Mei, L. H. I. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.10.026 · Cited by 229
Ferreira, F., Pinheiro, I., de Souza, S., Mei, L., & Lona, L. (2019) · Journal of Composites Science · doi:10.3390/jcs3020051 · Cited by 231
Nanofiller Reinforced Biodegradable PLA/PHA Composites: Current Status and Future Trends
Sun, J., Shen, J., Chen, S., Cooper, M. A., Fu, H., Wu, D., & Yang, Z. (2018) · Polymers · doi:10.3390/polym10050505 · Cited by 228
“Bio-based materials have disadvantages such as poor hydrophilicity, poor electrical conductivity, and poor mechanical properties during processing [21].”
BackgroundWolf, C., Angellier-Coussy, H., Gontard, N., Doghieri, F., & Guillard, V. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.03.085 · Cited by 227
TEMPO-Oxidized Cellulose with High Degree of Oxidation
Tang, Z., Li, W., Lin, X., Xiao, H., Miao, Q., Huang, L., Chen, L., & Wu, H. (2017) · Polymers · doi:10.3390/polym9090421 · Cited by 223
“As one of the high crystalline structural polysaccharides, cellulose has attracted extensive attention due to its high availability, biodegradability, biocompatibility, and good mechanical properties [1,2].”
BackgroundEspino-Pérez, E., Bras, J., Ducruet, V., Guinault, A., Dufresne, A., & Domenek, S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.017 · Cited by 222
“Since that time, they have been used increasingly as nanofiller in a number of different applications and in a number of polymers, which has already been extensively reviewed [3].”
BackgroundSelf-citationWood–Plastic Composite Technology
Gardner, D. J., Han, Y., & Wang, L. (2015) · Current Forestry Reports · doi:10.1007/s40725-015-0016-6 · Cited by 217
Review on Polysaccharides Used in Coatings for Food Packaging Papers
Nechita, P., & Roman (Iana-Roman), M. (2020) · Coatings · doi:10.3390/coatings10060566 · Cited by 215
“It is a linear polysaccharide consisting of repeated units of cellobiose, which is a combination of two anhydroglucose rings linked via a β-1,4 glycosidic bond (Figure 2) [20].”
BackgroundCrystalline Nanocellulose — Preparation, Modification, and Properties
Börjesson, M., & Westman, G. (2015) · Cellulose - Fundamental Aspects and Current Trends · doi:10.5772/61899 · Cited by 216
Fortunati, E., Puglia, D., Luzi, F., Santulli, C., Kenny, J. M., & Torre, L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.075 · Cited by 212
Extraction and characterization of cellulose single fibers from native african napier grass
Reddy, K. O., Maheswari, C. U., Dhlamini, M. S., Mothudi, B. M., Kommula, V. P., Zhang, J., Zhang, J., & Rajulu, A. V. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.110 · Cited by 206
Kian, L. K., Jawaid, M., Ariffin, H., & Karim, Z. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.03.065 · Cited by 204
Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development
Muñoz-Bonilla, A., Echeverria, C., Sonseca, Á., Arrieta, M. P., & Fernández-García, M. (2019) · Materials · doi:10.3390/ma12040641 · Cited by 200
Ferreira, F. V., Dufresne, A., Pinheiro, I. F., Souza, D. H. S., Gouveia, R. F., Mei, L. H. I., & Lona, L. M. F. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.08.045 · Cited by 196
Self-citationUsman, A., Zia, K. M., Zuber, M., Tabasum, S., Rehman, S., & Zia, F. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.02.004 · Cited by 198
Gupta, A., Simmons, W., Schueneman, G. T., Hylton, D., & Mintz, E. A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02458 · Cited by 197
High Temperature Proton Conduction in Nanocellulose Membranes: Paper Fuel Cells
Bayer, T., Cunning, B. V., Selyanchyn, R., Nishihara, M., Fujikawa, S., Sasaki, K., & Lyth, S. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01990 · Cited by 195
Pracella, M., Haque, M. M.-U., & Puglia, D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.071 · Cited by 193
Yang, X., Han, F., Xu, C., Jiang, S., Huang, L., Liu, L., & Xia, Z. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.08.032 · Cited by 190
Nanocellulose for Industrial Use
Blanco, A., Monte, M. C., Campano, C., Balea, A., Merayo, N., & Negro, C. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00005-5 · Cited by 190
Green Process for Chemical Functionalization of Nanocellulose with Carboxylic Acids
Espino-Pérez, E., Domenek, S., Belgacem, N., Sillard, C., & Bras, J. (2014) · Biomacromolecules · doi:10.1021/bm5013458 · Cited by 188
Self-citationEffects of processing on the properties of chitosan/cellulose nanocrystal films
Celebi, H., & Kurt, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.007 · Cited by 186
Zhang, Y., Nypelö, T., Salas, C., Arboleda, J., Hoeger, I. C., & Rojas, O. J. (2013) · Journal of Renewable Materials · doi:10.7569/jrm.2013.634115 · Cited by 184
Moriana, R., Vilaplana, F., & Ek, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.020 · Cited by 184
“29 30 The different properties of the nanosized cellulosic particles depend not only on the disintegration 31 method itself but also on the cellulose raw materials and their pretreatments (Abdul et al., 2012; 32 Spence et al., 2011).”
Background
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.