Investigation of the Influence of PLA Molecular Structure on the Crystalline Forms (α’ and α) and Mechanical Properties of Wet Spinning Fibres
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In this paper, the influence of the molecular structure of polylactide (PLA)—characterised by its molar mass and content of d-lactide isomer—on the molecular ordering and α’–α form transition during fibre manufacturing by the wet spinning method is described. Fibres were studied by wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). Additionally, the physical and mechanical properties of the fibres were determined. This study also examines the preliminary molecular ordering and crystallisation of PLA fibres at various draw ratios. The performed experiments clearly show the dependence of the molecular ordering of PLA on the molar mass and d-lactide content during the wet spinning process. The fibres manufactured from PLA with the lowest content of d-lactide and the lowest molar mass were characterised by a higher tendency for crystallisation and a higher possibility to undergo the disorder-to-order phase transition (α’ to α form). The structural changes in PLA explain the observed changes in the physical and mechanical properties of the obtained fibres.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913 · cited 1×
“in 2008 [21] presented that, in poly(L-lactide) homopolymer, the disordered α’ and the ordered α polymorphs are formed during crystallisation below 100 ◦C and above 120 ◦C, respectively.”
BackgroundPan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322 · cited 1×
“The synthesis of PLA is based on the polycondensation of lactic acid (poly(lactic acid)) or the ring-opening polymerisation of lactide obtained from the depolymerisation of oligomers of lactic acid (polylactides), which is a product of the fermentation of biomass such as corn [2,3].”
BackgroundChemical synthesis of polylactide and its copolymers for medical applications
Bendix, D. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00149-3 · Cited by 187 · cited 1×
“However, due to high manufacturing costs, the use of PLA was limited to medical applications for many years [4,5].”
Background
Cited by
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
“[218] investigated the formation of PLA crystals during the fiber-spinning process.”
BackgroundPalai, B., Mohanty, S., & Nayak, S. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106130 · Cited by 96
Bharathan, S. P., Guthige, M. R., Kumar, S., Kumar, R., & George, J. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.153379 · Cited by 2
Metadata
- Authors
- Puchalski, M., Kwolek, S., Szparaga, G., Chrzanowski, M., & Krucińska, I.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2017-01-06
- Volume
- 9
- Issue
- 1
- Pages
- 18
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2569799799
- Cited by
- 99
- References
- 6
- FWCI
- 5.34
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.