The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Determination of Hemicellulose, Cellulose, and Lignin Content in Different Types of Biomasses by Thermogravimetric Analysis and Pseudocomponent Kinetic Model (TGA-PKM Method)
Open accessAbstract
The standard method for determining the biomass composition, in terms of main lignocellulosic fraction (hemicellulose, cellulose and lignin) contents, is by chemical method; however, it is a slow and expensive methodology, which requires complex techniques and the use of multiple chemical reagents. The main objective of this article is to provide a new efficient, low-cost and fast method for the determination of the main lignocellulosic fraction contents of different types of biomasses from agricultural by-products to softwoods and hardwoods. The method is based on applying deconvolution techniques on the derivative thermogravimetric (DTG) pyrolysis curves obtained by thermogravimetric analysis (TGA) through a kinetic approach based on a pseudocomponent kinetic model (PKM). As a result, the new method (TGA-PKM) provides additional information regarding the ease of carrying out their degradation in comparison with other biomasses. The results obtained show a good agreement between experimental data from analytical procedures and the TGA-PKM method (±7%). This indicates that the TGA-PKM method can be used to have a good estimation of the content of the main lignocellulosic fractions without the need to carry out complex extraction and purification chemical treatments. In addition, the good quality of the fit obtained between the model and experimental DTG curves (R2Adj = 0.99) allows to obtain the characteristic kinetic parameters of each fraction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Vyazovkin, S., Burnham, A. K., Criado, J. M., Pérez-Maqueda, L. A., Popescu, C., & Sbirrazzuoli, N. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.03.034 · Cited by 5,961
Energy production from biomass (part 1): overview of biomass
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00118-3 · Cited by 4,860
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Handbook of Wood Chemistry and Wood Composites
(2005) · CRC Press eBooks · doi:10.1201/9780203492437 · Cited by 1,480
Saini, J. K., Saini, R., & Tewari, L. (2015) · 3 Biotech · doi:10.1007/s13205-014-0246-5 · Cited by 1,212
The mechanism for thermal decomposition of cellulose and its main products
Shen, D. K., & Gu, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.06.095 · Cited by 994
Calculation of higher heating values of biomass fuels
Demirbaş, A. (1997) · Fuel · doi:10.1016/s0016-2361(97)85520-2 · Cited by 817
Thermogravimetric analysis as a new method to determine the lignocellulosic composition of biomass
Carrier, M., Loppinet-Serani, A., Denux, D., Lasnier, J.-M., Ham-Pichavant, F., Cansell, F., & Aymonier, C. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.08.067 · Cited by 780
Burhenne, L., Messmer, J., Aicher, T., & Laborie, M.-P. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.01.012 · Cited by 615
Cellulose, xylan and lignin interactions during pyrolysis of lignocellulosic biomass
Yu, J., Paterson, N., Blamey, J., & Millan, M. (2017) · Fuel · doi:10.1016/j.fuel.2016.11.057 · Cited by 452
Pasangulapati, V., Ramachandriya, K. D., Kumar, A., Wilkins, M. R., Jones, C. L., & Huhnke, R. L. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.036 · Cited by 385
Torrefaction, pyrolysis and two-stage thermodegradation of hemicellulose, cellulose and lignin
Chen, W.-H., Wang, C.-W., Ong, H. C., Show, P. L., & Hsieh, T.-H. (2019) · Fuel · doi:10.1016/j.fuel.2019.116168 · Cited by 358
(2009) · doi:10.1007/978-3-540-85095-3 · Cited by 356
The thermal performance of the polysaccharides extracted from hardwood: Cellulose and hemicellulose
Shen, D. K., Gu, S., & Bridgwater, A. V. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.018 · Cited by 320
Rowell, R., Pettersen, R., & Tshabalala, M. (2012) · Handbook of Wood Chemistry and Wood Composites, Second Edition · doi:10.1201/b12487-5 · Cited by 311
Yeo, J. Y., Chin, B. L. F., Tan, J. K., & Loh, Y. S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.12.003 · Cited by 304
Kinetics of Biomass Pyrolysis: a Reformulated Three-Parallel-Reactions Model
Manyà, J. J., Velo, E., & Puigjaner, L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020218p · Cited by 291
Kinetic study of Chinese biomass slow pyrolysis: Comparison of different kinetic models
Hu, S., Jess, A., & Xu, M. (2007) · Fuel · doi:10.1016/j.fuel.2007.02.031 · Cited by 233
Real-time evolved gas analysis by FTIR method: an experimental study of cellulose pyrolysis
Li, S., Lyons-Hart, J., Banyasz, J., & Shafer, K. (2001) · Fuel · doi:10.1016/s0016-2361(01)00064-3 · Cited by 229
TGA and macro-TGA characterisation of biomass fuels and fuel mixtures
Skreiberg, A., Skreiberg, Ø., Sandquist, J., & Sørum, L. (2011) · Fuel · doi:10.1016/j.fuel.2011.02.012 · Cited by 229
Wang, S., Lin, H., Ru, B., Sun, W., Wang, Y., & Luo, Z. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.014 · Cited by 207
Zhou, H., Long, Y., Meng, A., Li, Q., & Zhang, Y. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.04.040 · Cited by 201
Influence of Chemical Composition of Eucalyptus Wood on Gravimetric Yield and Charcoal Properties
Pereira, B. L. C., Carneiro, A. D. C. O., Carvalho, A. M. M. L., Colodette, J. L., Oliveira, A. C., & Fontes, M. P. F. (2013) · BioResources · doi:10.15376/biores.8.3.4574-4592 · Cited by 192
The pyrolytic behavior of cellulose in lignocellulosic biomass: a review
Shen, D., Xiao, R., Gu, S., & Luo, K. (2011) · RSC Advances · doi:10.1039/c1ra00534k · Cited by 177
PHA bioplastic: A value‐added coproduct for biomass biorefineries
Snell, K. D., & Peoples, O. P. (2009) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.161 · Cited by 153
Qiao, Y., Wang, B., Ji, Y., Xu, F., Zong, P., Zhang, J., & Tian, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.102 · Cited by 149
Influence of extractives on mechanism of biomass pyrolysis
Guo, X., Wang, S., Wang, K., Qian, L. I. U., & Luo, Z. (2010) · Journal of Fuel Chemistry and Technology · doi:10.1016/s1872-5813(10)60019-9 · Cited by 139
Aboyade, A. O., Carrier, M., Meyer, E. L., Knoetze, J. H., & Görgens, J. F. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.12.007 · Cited by 122
Fast determination of lignocellulosic composition of poplar biomass by thermogravimetry
Rego, F., Dias, A. P. S., Casquilho, M., Rosa, F. C., & Rodrigues, A. M. (2019) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2019.01.037 · Cited by 116
Mateos, P. Á., Alés-Álvarez, F. J., & Martín, J. F. G. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.10.052 · Cited by 91
Pyrolysis of extractive rich agroindustrial residues
Melzer, M., Blin, J., Bensakhria, A., Valette, J., & Broust, F. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.05.027 · Cited by 73
Kim, S., & Dale, B. E. (2015) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1554 · Cited by 63
Tannins of Conifer Bark as Nordic Piquancy—Sustainable Preservative and Aroma?
Raitanen, J., Järvenpää, E., Korpinen, R. I., Mäkinen, S., Hellström, J., Kilpeläinen, P. O., Liimatainen, J., Ora, A., Tupasela, T., & Jyske, T. M. (2020) · Molecules · doi:10.3390/molecules25030567 · Cited by 63
Martínez, M. G., Dupont, C., Perez, D. D. S., Mortha, G. F., Thiery, S., Meyer, X.-M., & Gourdon, C. (2020) · Energy · doi:10.1016/j.energy.2020.118067 · Cited by 19
Cited by
Jazie, A. A., Haydary, J., Abed, S. A., & Al-Dawody, M. F. (2022) · Algal Research · doi:10.1016/j.algal.2021.102596 · Cited by 36
J., M. S. K., Ramakrishnan, P., & Panneerselvam, P. (2025) · Biofuels · doi:10.1080/17597269.2025.2493414 · Cited by 3
Metadata
- Authors
- Díez, D., Urueña, A., Piñero, R., Barrio, A., & Tamminen, T.
- Venue
- Processes
- Publisher
- MDPI AG
- Published
- 2020-08-27
- Volume
- 8
- Issue
- 9
- Pages
- 1048
- ISSN
- 2227-9717 (ISSN-L)
- OpenAlex
- W3081458729
- Cited by
- 275
- References
- 37
- FWCI
- 6.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.