Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 41 of the 42 references it cites were found in a registry or an index; none of the 12 sources its claims cite is checked for support yet.

Extracting a Connected River Network from DEM by Incorporating Surface River Occurrence Data and Sentinel-2 Imagery in the Danjiangkou Reservoir Area

Open access
Lu, Lijie, Wang, Lihui, Yang, Qichi, Zhao, Pengcheng, Du, Yun, Xiao, Fei, Ling, Feng · 2023 · Remote Sensing

Abstract

Accurate extraction of river network from the Digital Elevation Model (DEM) is a significant content in the application of a distributed hydrological model. However, the study of river network extraction based on DEM has some limitations, such as location offset, inaccurate parallel channel and short circuit of meandering channels. In this study, we proposed a new enhancement method for NASADEM V001 in the Danjiangkou Reservoir area. We used Surface Water Occurrence (SWO) and Sentinel-2 data to describe vertical limit differences between morphological units to complement actual flow path information from NASADEM data by a stream burning method. The differences between the extracted river network and the actual river network were evaluated in three different geographical regions. Compared with the actual river centerline, the location error of the river network extraction was significantly reduced. The average offset distances between river network extraction and the actual river network were 68.38, 36.99, and 21.59 m in the three test areas. Compared with NASADEM V001, the average offset distances in the three test areas were reduced by 7.26, 40.29, and 42.35%, respectively. To better estimate accuracy, we also calculated and compared the accuracy of the river network based on MERIT Hrdro and HydroSHEDS. The experimental results demonstrated that the method can effectively improve the accuracy of river network extraction and meet the needs of hydrological simulation.

Overview

CoChat Summary

TL;DR

The paper proposes AGRSDEM, a DEM enhancement method that combines NASADEM V001 with Surface Water Occurrence and Sentinel-2-derived water centerlines via stream burning and modified AGREE to extract a connected river network in the Danjiangkou Reservoir area. In three test areas, AGRSDEM reduced average offset distance from the reference river network relative to NASADEM V001 by 7.26%, 40.29%, and 42.35%.

Key findings

  • AGRSDEM achieved average offset distances of 68.38 m (test area A), 36.99 m (B), and 21.59 m (C) between extracted and actual river networks; compared with NASADEM V001, these were reductions of 7.26%, 40.29%, and 42.35%, respectively.
  • In test area C, AGRSDEM’s mean offset of 21.59 m was 42.35%, 57.82%, and 31.04% lower than NASADEM V001, HydroSHEDS, and MERIT Hydro, respectively.
  • In test area A, the AGRSDEM river network contained 4310 pixels, reduced by 15.62%, 17.90%, and 19.38% compared with NASADEM V001, HydroSHEDS, and MERIT Hydro; in test area B it contained 7882 pixels.
  • D8 was selected over Dinf and MFD-fg because Dinf and MFD-fg produced discontinuous river networks, while D8 had more stable performance with AGRSDEM.

Methods

  • Study area: Danjiangkou Reservoir area, about 47,406.55 km². Data included NASADEM 001 (1 arc-second), Surface Water Occurrence (SWO; 30 m, based on Landsat imagery spanning the past 32 years), and Sentinel-2 images from May–August 2020.
  • AGRSDEM workflow: preprocess SWO into PSWO using morphological thresholds a = 1.80 km, b = 0.24 km², c = 0.0008; stream-burn PSWO into NASADEM with burning intensity a = 0.36 (tan 0.34) to generate SDEM; extract skeleton lines from Sentinel-2 NDWI and PSWO using Zhang-Suen thinning and seven water-occurrence thresholds (>95, 90, 80, 70, 55, 25, 0); apply modified AGREE with buffer radius 120 m, b = 24, c = 52; extract the river network using D8 with a flow accumulation threshold of 20,000 pixels.
  • Validation: offset distance was calculated between each extracted river network pixel and the nearest pixel of a manually digitized reference centerline on high-resolution Google and SWO images. Three test areas (A, B, C) were compared across NASADEM V001, AGRSDEM, HydroSHEDS, and MERIT Hydro at 10 m resolution, with statistics including quartiles, max, mean, and pixel count.

Limitations

  • Stated: AGRSDEM requires artificial parameter setting and does not perform satisfactorily in plain areas; SWO and remote sensing images could not identify certain narrow waterways and replacement dendritic transport paths of large lakes with multiple arms/branches, leading to deviation or error in river path positioning.
  • Stated: extraction of an artificial river network based on AGRSDEM could not be connected, and it is difficult to overcome limitations of using only water occurrence data and vector water maps; future work will incorporate hydrological data into flow direction rather than DEM and use higher-resolution hydrological data.
  • Evident from the text: key parameters (a, b, c, b = 24, c = 52, flow accumulation threshold 20,000) were tuned for the Danjiangkou Reservoir area and may not transfer directly; validation relied on manually digitized reference centerlines; parallel streams remained in some areas, and AGRSDEM river networks may be disconnected where SWO/vector hydrological information is lacking or topography is affected by human activities.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/rs15041014

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 AGRSDEM framework combined stream burning, modified AGREE, and D8 algorithm to extract the river network. Figure 1. AGRSDEM framework combined stream burning, modified AGREE, and D8 algorithm to extract the river network.
Figure 1 AGRSDEM framework combined stream burning, modified AGREE, and D8 algorithm to extract the river network. Figure 1. AGRSDEM framework combined stream burning, modified AGREE, and D8 algorithm to extract the river network.CC-BY · From the PDF
Figure 2 SWO map ( a ) and Preprocessed SWO map ( b ). Figure 2. SWOmap ( a ) and Preprocessed SWO map ( b ).
Figure 2 SWO map ( a ) and Preprocessed SWO map ( b ). Figure 2. SWOmap ( a ) and Preprocessed SWO map ( b ).CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Figure 4 Extraction of the skeleton lines of hydrography layers. Figure 4. Extraction of the skeleton lines of hydrography layers.
Figure 4 Extraction of the skeleton lines of hydrography layers. Figure 4. Extraction of the skeleton lines of hydrography layers.CC-BY · From the PDF
Figure 5 The flow chart of setting a flexible parameter value of the buffering radius of modified AGREE.
Figure 5 The flow chart of setting a flexible parameter value of the buffering radius of modified AGREE.CC-BY · From the PDF
Figure 6 Location of the Danjiangkou Reservoir area, China. Figure 6. Location of the Danjiangkou Reservoir area, China.
Figure 6 Location of the Danjiangkou Reservoir area, China. Figure 6. Location of the Danjiangkou Reservoir area, China.CC-BY · From the PDF
Figure 7 River network of AGRSDEM and NASADEM (the blue and red lines are the river network based on AGRSDEM and NASADEM, respectively). Figure 7. River network of AGRSDEM and NASADEM (the blue and red lines are the river network based on AGRSDEM and NASADEM, respectively).
Figure 7 River network of AGRSDEM and NASADEM (the blue and red lines are the river network based on AGRSDEM and NASADEM, respectively). Figure 7. River network of AGRSDEM and NASADEM (the blue and red lines are the river network based on AGRSDEM and NASADEM, respectively).CC-BY · From the PDF
Figure 8 River network based on four data in three test areas. Figure 8. River network based on four data in three test areas.
Figure 8 River network based on four data in three test areas. Figure 8. River network based on four data in three test areas.CC-BY · From the PDF
Figure 9 Histogram of river network extraction of four DEMs in the three test areas. Figure 9. Histogram of river network extraction of four DEMs in the three test areas.
Figure 9 Histogram of river network extraction of four DEMs in the three test areas. Figure 9. Histogram of river network extraction of four DEMs in the three test areas.CC-BY · From the PDF
Figure 10 Comparison maps of different reconstructed DEM (significant changes are marked in Figure 10. Comparison maps of different reconstructed DEM (significant changes are marked in red).
Figure 10 Comparison maps of different reconstructed DEM (significant changes are marked in Figure 10. Comparison maps of different reconstructed DEM (significant changes are marked in red).CC-BY · From the PDF
Figure 11 Comparison between the different sharp drop/raise grids of AGRSDEM (significant changes are marked in red). Figure 11. Comparison between the different sharp drop/raise grids of AGRSDEM (significant changes are marked in red).
Figure 11 Comparison between the different sharp drop/raise grids of AGRSDEM (significant changes are marked in red). Figure 11. Comparison between the different sharp drop/raise grids of AGRSDEM (significant changes are marked in red).CC-BY · From the PDF
Figure 12 The comparison between the different smooth modified elevation grids of AGRSDEM (significant changes are marked in red). Figure 12. The comparison between the different smooth modified elevation grids of AGRSDEM (significant changes are marked in red).
Figure 12 The comparison between the different smooth modified elevation grids of AGRSDEM (significant changes are marked in red). Figure 12. The comparison between the different smooth modified elevation grids of AGRSDEM (significant changes are marked in red).CC-BY · From the PDF
Figure 13 Comparison maps of different algorithms of Surface Stream Simulation (significant changes are marked in green). Figure 13. Comparison maps of different algorithms of Surface Stream Simulation (significant changes are marked in green).
Figure 13 Comparison maps of different algorithms of Surface Stream Simulation (significant changes are marked in green). Figure 13. Comparison maps of different algorithms of Surface Stream Simulation (significant changes are marked in green).CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 7 Not valid · 9 Not checked · 63 Own results and interpretations

45 more claims

Create a free account to see all 79 claims and to verify the 12 references still open.

See all claims — free account
  • It may state two separate claims as one. 16
  • Probably not a substantial claim. 14
  • The quote only partly states this claim. 2

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 42 references

Research works printed but not linked: 2

  1. Saunders, 1999, Preparation of DEMs for use in environmental modeling analysis, Esri User Conf., 24, 1
  2. Peng, 2015, River System Extraction Based on AGREE Algorithm, Water Resour. Power, 33, 27

Cited by

See all 15

Metadata

Authors
Lu, L., Wang, L., Yang, Q., Zhao, P., Du, Y., Xiao, F., & Ling, F.
Affiliations
Chinese Academy of Sciences (CN)
Corresponding author
Wang, Lihui
Venue
Remote Sensing
Publisher
MDPI AG
Published
2023-02-12
Volume
15
Issue
4
Pages
1014
ISSN
2072-4292 (ISSN-L)
OpenAlex
W4320494398
Cited by
15
References
42
Citations by year
2026: 6 · 2025: 2 · 2024: 4 · 2023: 3
FWCI
1.09
Type
journal article
Language
en
Open access
Locations
  • Remote Sensing (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Natural Science Foundation of China (U22A20567, 51809250, 2020BCA074, KY201802007)
  • Hubei Provincial Key Research and Development Program (U22A20567, 51809250, 2020BCA074, KY201802007)
  • Science and Technology Partnership Program, Ministry of Science and Technology of China (U22A20567, 51809250, 2020BCA074, KY201802007)
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Groundwater and Watershed Analysis
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
  • Physical Sciences › Environmental Science › Global and Planetary Change › Flood Risk Assessment and Management
Keywords
river network extraction, digital elevation model, NASADEM, Sentinel-2 imagery, meandering channels, parallel channels, Danjiangkou Reservoir, MERIT Hydro, HydroSHEDS, distributed hydrological model

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-19, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-19 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.