Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index; none of the 12 sources its claims cite is checked for support yet.

Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy

Open access
De Blasio, Gabriel, Quesada-Arencibia, Alexis, García, Carmelo, Molina-Gil, Jezabel, Caballero-Gil, Cándido · 2017 · Sensors

Abstract

This paper presents a study of positioning system that provides advanced information services based on Wi-Fi and Bluetooth Low Energy (BLE) technologies. It uses Wi-Fi for rough positioning and BLE for fine positioning. It is designed for use in public transportation system stations and terminals where the conditions are “hostile” or unfavourable due to signal noise produced by the continuous movement of passengers and buses, data collection conducted in the constant presence thereof, multipath fading, non-line of sight (NLOS) conditions, the fact that part of the wireless communication infrastructure has already been deployed and positioned in a way that may not be optimal for positioning purposes, variable humidity conditions, etc. The ultimate goal is to provide a service that may be used to assist people with special needs. We present experimental results based on scene analysis; the main distance metric used was the Euclidean distance but the Mahalanobis distance was also used in one case. The algorithm employed to compare fingerprints was the weighted k-nearest neighbor one. For Wi-Fi, with only three visible access points, accuracy ranged from 3.94 to 4.82 m, and precision from 5.21 to 7.0 m 90% of the time. With respect to BLE, with a low beacon density (1 beacon per 45.7 m2), accuracy ranged from 1.47 to 2.15 m, and precision from 1.81 to 3.58 m 90% of the time. Taking into account the fact that this system is designed to work in real situations in a scenario with high environmental fluctuations, and comparing the results with others obtained in laboratory scenarios, our results are promising and demonstrate that the system would be able to position users with these reasonable values of accuracy and precision.

Overview

CoChat Summary

TL;DR

The paper presents a two-channel indoor positioning system for a harsh bus-station environment, using Wi-Fi for coarse positioning and BLE for fine positioning and advanced information services. In tests with three Wi-Fi APs and seven BLE beacons, Wi-Fi achieved 3.94–4.82 m accuracy and BLE achieved 1.47–2.15 m accuracy.

Key findings

  • Wi-Fi: with only three visible access points, accuracy ranged from 3.94 to 4.82 m and precision from 5.21 to 7.0 m 90% of the time. The best Wi-Fi test (Spearman rank correlation, k = 2) gave a mean error of 3.94 m, precision of 3.19 m 50% of the time and near 8.0 m 90% of the time; the most favourable orientation with k = 4 gave 4.44 m accuracy and precision below 5.21 m 90% of the time.
  • BLE: with a low beacon density of 1 beacon per 45.7 m², accuracy ranged from 1.47 to 2.15 m and precision from 1.81 to 3.58 m 90% of the time. The best BLE test (mean RSS values plus Mahalanobis distance, k = 2) achieved a mean error of 1.47 m and precision of 1.81 m 90% of the time. The BLE attenuation model gave a mean distance-estimation error of 1.91 m with one regression line and 1.85 m with two lines, with error below 2.0 m 70% of the time.
  • Comparison: WLAN-based systems in the literature showed accuracy of 1.5–5.0 m and precision of 2.0–5.9 m 90% of the time; Bluetooth-based systems showed accuracy of 0.48–3.6 m and precision of 2.0–4.8 m 95% of the time. The authors consider their results reasonable given the challenging, non-laboratory conditions.
  • System design: Wi-Fi provides a rough first mental map of the environment, while BLE refines the position and enables advanced information services; three abstraction zones are defined based on the user’s distance from the target.

Methods

  • Testbed: a local bus station built of reinforced concrete and located near the sea, with a 40 m × 8 m rectangular section used for tests. Three existing Ubiquiti UniFi 802.11ac Long Range APs (max +20 dBm) and seven iBKS105 BLE beacons (max +4 dBm) were used. Wi-Fi used a 20-cell grid of 4 m × 4 m cells (16 fingerprints/m²); BLE initially used 22 cells of 2 m × 2 m (14.5 fingerprints/m²), later increased to 42 cells.
  • Fingerprinting: offline and online RSS databases were built. Wi-Fi offline collection took 30 one-second samples every 2 s (15 samples) per AP and orientation, with 10–26 online target points; BLE offline collection used a Samsung Galaxy S5 running Android 6.0.1, taking 1 sample/s for 30 s per reference point per beacon in aggregate mode, with 10 online target points. Fingerprint comparison used weighted k-nearest neighbours, with Euclidean distance except one BLE test using Mahalanobis distance; Wi-Fi Test 4 used Spearman’s rank correlation coefficient.
  • Analysis: accuracy was expressed as mean error and precision via cumulative probability function in percentile format. BLE also used an RSS attenuation model, P(d) = A − 10n·log10(d), fitted with one or two regression lines.

Limitations

  • Stated in the paper: comparison with other systems is difficult because each system uses different parameters and reports accuracy/precision differently; Wi-Fi error values are considered upper bounds and could be improved; BLE beacon density and distribution were not ideal (the ideal would be a beacon at each stop); existing Wi-Fi APs were not optimally placed for positioning; external Wi-Fi APs were too weak and excluded; a single-slope regression line may misestimate distances near versus far from a beacon; raw data, noisy conditions, a 4 m Wi-Fi grid and few reference points limit performance.
  • Stated future work: greater BLE deployment, smaller reference-point spacing, more samples, shorter collection campaigns, data pre-processing and search filtering, more heterogeneous devices with calibration, and probabilistic positioning algorithms.
  • Evident from the text: the evaluation relies on a single testbed and a limited device set (an Asus laptop for Wi-Fi and a Samsung Galaxy S5 for BLE), so device dependence is not fully controlled; the paper itself notes device calibration as future work.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/s17061299

Cites

33 of 33 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Schematic view of advanced information services that could be offered: bus station guide, ticketing, line information.
Figure 1 Schematic view of advanced information services that could be offered: bus station guide, ticketing, line information.CC BY · PubMed Central
Figure 2 Schematic view of key elements of the bus station and Wi-Fi APs and BLE beacons.
Figure 2 Schematic view of key elements of the bus station and Wi-Fi APs and BLE beacons.CC BY · PubMed Central
Figure 3 View of the area to be used as a testbed.
Figure 3 View of the area to be used as a testbed.CC BY · PubMed Central
Figure 4 Testbed: (a) schematic view (highlighted in red); (b) dimensions and axes of chosen coordinates.
Figure 4 Testbed: (a) schematic view (highlighted in red); (b) dimensions and axes of chosen coordinates.CC BY · PubMed Central
Figure 5 Grid chosen in the testbed: (a) in relation to the 3 Wi-Fi APs; (b) detail showing the reference points of the Wi-Fi and BLE databases and the arrangement of the BLE beacons.
Figure 5 Grid chosen in the testbed: (a) in relation to the 3 Wi-Fi APs; (b) detail showing the reference points of the Wi-Fi and BLE databases and the arrangement of the BLE beacons.CC BY · PubMed Central
Figure 6 Schematic view of abstraction zones in a real scenario.
Figure 6 Schematic view of abstraction zones in a real scenario.CC BY · PubMed Central
Figure 7 RSS vs. time for point TP1 and the three APs. (a) AP1; (b) AP2 and (c) AP3.
Figure 7 RSS vs. time for point TP1 and the three APs. (a) AP1; (b) AP2 and (c) AP3.CC BY · PubMed Central
Figure 8 RSS vs. time for point TP4 and the three APs: (a) AP2; (b) AP1 and (c) AP3.
Figure 8 RSS vs. time for point TP4 and the three APs: (a) AP2; (b) AP1 and (c) AP3.CC BY · PubMed Central
Figure 9 RSS histograms for AP1 at reference points (a) 1-1 and (b) 2-1.
Figure 9 RSS histograms for AP1 at reference points (a) 1-1 and (b) 2-1.CC BY · PubMed Central
Figure 10 Straight lines with equal RSS values for Wi-Fi access point pairs.
Figure 10 Straight lines with equal RSS values for Wi-Fi access point pairs.CC BY · PubMed Central
Figure 11 Distribution of the 10 random points or target points.
Figure 11 Distribution of the 10 random points or target points.CC BY · PubMed Central
Figure 12 Precision (CDF) for Test 2 and Test 3.
Figure 12 Precision (CDF) for Test 2 and Test 3.CC BY · PubMed Central
Figure 13 Precision (CDF) for Test 2, Test 3 and Test 4.
Figure 13 Precision (CDF) for Test 2, Test 3 and Test 4.CC BY · PubMed Central
Figure 14 Graphs for the mean RSS values vs. distance to the Y axis at reference points along lines 1 and 2, for 4 of the 7 beacons. (a) Beacons 1; (b) Beacons 5; (c) Beacons 2 and (d) Beacons 4.
Figure 14 Graphs for the mean RSS values vs. distance to the Y axis at reference points along lines 1 and 2, for 4 of the 7 beacons. (a) Beacons 1; (b) Beacons 5; (c) Beacons 2 and (d) Beacons 4.CC BY · PubMed Central
Figure 15 Linear regression for beacon 1 using all the reference points.
Figure 15 Linear regression for beacon 1 using all the reference points.CC BY · PubMed Central
Figure 16 Histograms of RSS values for two beacons: (a) Beacon 1 in the absence of passengers; (b) Beacon 7 in the presence of passengers.
Figure 16 Histograms of RSS values for two beacons: (a) Beacon 1 in the absence of passengers; (b) Beacon 7 in the presence of passengers.CC BY · PubMed Central
Figure 17 Grid with the initial 22 reference points (only odd points) and with the 42 points used later. The 10 target points are also displayed.
Figure 17 Grid with the initial 22 reference points (only odd points) and with the 42 points used later. The 10 target points are also displayed.CC BY · PubMed Central
Figure 18 Precision (CDF) for Test 1, 2 and 3 with: (a) 22 and (b) 42 reference points.
Figure 18 Precision (CDF) for Test 1, 2 and 3 with: (a) 22 and (b) 42 reference points.CC BY · PubMed Central
Figure 19 Linear regression for beacon 1 using all the reference points.
Figure 19 Linear regression for beacon 1 using all the reference points.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 1 Not valid · 12 Not checked · 55 Own results and interpretations

18 more claims

Create a free account to see all 68 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 34
  • The quote only partly states this claim. 6
  • Borderline: one of the tests for a substantial claim is unclear. 1
  • Probably not a substantial claim. 14

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

1 of 1

Citations

Cites

Show all 32 references

Research works printed but not linked: 1

  1. Ge, T. (2015). Indoor Positioning System based on Bluetooth Low Energy for Blind or Visually Impaired Users. [Master’s Thesis, KTH Royal Institute of Technology, School of Information and Communication Technology (ICT), Communication Systems (CoS) Department].

Cited by

See all 59

Metadata

Authors
De Blasio, G., Quesada-Arencibia, A., García, C., Molina-Gil, J., & Caballero-Gil, C.
Affiliations
  • Instituto Universitario de Ciencias y Tecnologías Cibernéticas, ULPGC, 35001 Las Palmas de Gran Canaria, Las Palmas, Spain
  • Universidad de Las Palmas de Gran Canaria (ES)
  • Department of Computer Engineering and Systems, University of La Laguna, 38200 San Cristóbal de La Laguna, Santa Cruz de Tenerife, Spain
Venue
Sensors
Publisher
MDPI AG
Published
2017-06-06
Volume
17
Issue
6
Pages
1299
ISSN
1424-8220 (ISSN-L)
OpenAlex
W2623158358
Cited by
59
References
32
Citations by year
2026: 4 · 2025: 1 · 2024: 5 · 2023: 1 · 2022: 7 · 2021: 10 · 2020: 7 · 2019: 11 · 2018: 9 · 2017: 4
FWCI
3.52
Type
journal article
Language
en
Open access
Locations
  • Sensors (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Acceda (Universidad de Las Palmas de Gran Canaria) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Zenodo (CERN European Organization for Nuclear Research) (cc-by)
Funders
  • Fundación CajaCanarias (TEC2014-54110-R, DIG02-INSITU)
  • Ministerio de Economía y Competitividad (DIG02-INSITU, TEC2014-54110-R)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Wireless Communication Technologies
  • Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
Keywords
indoor positioning, Wi-Fi fingerprinting, Bluetooth Low Energy, extreme environments, non-line-of-sight, multipath fading, weighted k-nearest neighbors, Mahalanobis distance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy. https://app.cochat.ai/papers/10.3390/s17061299
The paper
De Blasio, G., Quesada-Arencibia, A., García, C., Molina-Gil, J., & Caballero-Gil, C. (2017). Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy. Sensors. https://doi.org/10.3390/s17061299

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.